Search

A palatogingival groove is a developmental anomaly that predisposes the involved tooth to develop a severe periodontal lesion. These grooves often present a clinical challenge because diagnosis and treatment planning require an interdisciplinary approach. This case report describes the successful management of a right maxillary lateral incisor with a deep palatogingival groove in combination with an extensive periodontal pocket and pulp necrosis of the involved tooth. Collaborative management used a combination of endodontic treatment, periodontal therapy, odontoplasty, and a periodontal regenerative procedure using protein complex derived from enamel matrix (Emdogain; Straumann, Basel, Switzerland). Despite a predicted poor prognosis, the tooth lesion healed. This report also discusses the rationale behind the treatment modalities. [ABSTRACT FROM AUTHOR]

Abstract: Introduction: Complete endodontic system disinfection requires the removal of vital and necrotic pulp tissue, microorganisms, and toxins. The purpose of this study was to compare the effects of 2 ultrasonic irrigation techniques on the penetration of sodium hypochlorite into the main canal and simulated lateral canals of extracted teeth. Methods: Two simulated lateral canals each were created 2, 4, and 6 mm from the working length in 60 single-rooted teeth (6 canals/tooth, n = 360). To resemble the clinical situation, a closed system was created in each tooth. The teeth were randomly assigned to 3 experimental irrigation groups: group 1 (n = 20), positive pressure irrigation (PPI); group 2 (n = 20), passive ultrasonic irrigation (PUI); and group 3 (n = 20), continuous ultrasonic irrigation (CUI). Samples were evaluated by direct observation of still images recorded under a dental operating microscope. To examine irrigating solution penetration, 20% Chinese ink (Sanford Rotring GmbH, Hamburg, Germany) was added to a 5% sodium hypochlorite solution and delivered into the root canals. Results: The results showed a significantly higher (P < .05) penetration of irrigant into the lateral canals in the CUI group. PUI and CUI did not differ significantly in solution penetration into the apical thirds of the main canals. The PPI group showed a significantly lower penetration of sodium hypochlorite into the main and lateral canals compared with the CUI and PUI groups. Conclusions: CUI as a final rinse significantly increased the penetration of irrigating solution into simulated lateral canals. [Copyright &y& Elsevier]

Abstract: Introduction: This in vitro study compared the tooth color and the ultrastructure of internal dental tissues before and after internal bleaching. Methods: Sodium perborate was placed in the pulp chamber of endodontically treated molars and sealed with intermediate restorative material. The test samples were stored in a physiologic solution, and the bleaching agent was replaced every 7 days. A control group was used. After 1 month, the colors of the test and control samples were measured with a colorimeter, and the internal surfaces were observed under field emission scanning electron microscopy (FESEM). Results: Statistically significant differences were found between the test and control sample colors. The FESEM ultrastructure analysis of the internal enamel and dentin surfaces did not show any changes after the internal bleaching. Conclusions: The results of the present study show that sodium perborate is effective in bleaching nonvital teeth and does not produce ultrastructural changes in the dental tissues. [Copyright &y& Elsevier]

summary It is difficult to determine the existence of a normal or physiological masticatory cycle, because there exists great individual diversity. This study presents some data about two parameters of masticatory cycles according to the frontal plane, i.e. the area and length of right-sided and left-sided cycles in a group of 30 young people, 18 women and 12 men. For our study the Myotronics K6-1 kinesiograph was used. It registers the magnetic field and allows us to obtain graphic recordings of the jaw movement in the three space planes. Other authors have analysed these parameters, but none of those reviewed provides information about the distribution to each side or according to the gender of sampling subjects selected for the analysis. We have tried to describe the normal morphology of the masticatory cycles and, also, establish a reference so as to provide help in the diagnosis of the functional pathology of the masticatory system. [ABSTRACT FROM AUTHOR]

Abstract: Introduction: Rotary nickel-titanium instruments have multiple advantages but with the risk of more fractures because of flexure or torsion. Alternating rotation appears to be an alternative to continuous rotary movement. The objective of this study was to determine the influence of the type of instrument rotation on the frequency of fractures or deformation. Methods: Instrumentation was performed on 120 molar root canals with an angle of curvature greater than 30° using alternating rotation (group A: 60° clockwise, 45° counterclockwise) and continuous rotation (group B). Results: The results indicate that instruments used with alternating rotation have a higher mean number of uses (13.0) compared with the continuous rotation group (10.05); this difference was statistically significant (p < 0.05). Conclusions: The ProTaper shaping instruments (S1 and S2) are those that achieved the greatest difference in use with alternating rotation, with S2 being the most resistant to fracture or deformation with the two types of movement used. [Copyright &y& Elsevier]

Estimation of children's chronological age is highly important in human and forensic sciences. The Demirjian method has been reported as accurate for this purpose. The literature review shows some evidence that the accuracy of estimating chronological age via the Demirjian standards is not a straightforward process. The objective of this research is to analyze the reliability of the Demirjian standards in Portuguese and Spanish children and adolescents and adapt it to include sex and group age as contingent factors., Methods: Orthopantomographs of 574 Portuguese and Spanish male and female children and adolescents were employed to test the reliability of the Demirjian method. After testing for inter-rater consistency and age estimation using the Demirjian standards, multiple regression analysis was performed controlling for sex and age group., Results: The Demirjian standards overestimated chronological age for both sexes, mainly for females. Through the development of regression functions, more detailed dental age estimation was performed. The predictive capacities of the Demirjian method and the significant teeth varied as a function of children's age. The Demirjian global standard predicted over 65% of the variance of the chronological age. Taking a tooth-by-tooth approach, the predictive ability increased by over 70%., Conclusions: The accuracy of estimating chronological age via the Demirjian method is not as reliable as it might appear, judging from the results found according to age group and according to sex crossed with age group., Competing Interests: The authors declare no conflict of interest.

Background: The aim of this study was to evaluate the fracture and defects observed in ProTaper Next files discarded after a normal clinical use., Material and Methods: 571 ProTaper Next rotary instruments were collected after clinical use from the clinic of endodontics over 12 months. The length of the files was measured using a digital caliper to determine any fracture, later all the files were evaluated under a stereomicroscope to observe defects such as unwinding, curving or fracture. The data obtained were analyzed using a chi-square and z test., Results: 13.83% of the discarded files showed defects, the most frequent defect was fracture (7.53%). The highest rate of fracture was observed in the X1 (17.04) files (19.87%). The presence of deformations without fracture was also more frequent in the 17.04 file (11.8%)., Conclusions: Because of the relatively high incidence of deformation of smaller files, these instruments should be considered as a single use. It is important not to exceed the maximum uses recommended by the manufacturer to reduce the risk of cyclic fatigue, the main cause of fracture of the files (79.07%). It is also important to observe each file after use to discard small defects or fractures. Key words: Clinical use, deformation, fracture, M-Wire, ProTaper Next., Competing Interests: Conflict of interest statement: The authors have declared that no conflict of interest exist.

Background: The technique of alternating rotation has been used with NiTi rotary instruments to increase the resistance to fracture compared with conventional continuous rotation. However, it is still not clear what type of instrumentation could provide better results in the preservation of the original canal anatomy., Aim: The aim of this study is to determine the influence of the type of rotation on canal transportation and centering ability using cone-beam computed tomography (CBCT) imaging., Materials and Methods: In total, 50 mesial canals of mandibular molars with curvatures between 30° and 60° were divided into two experimental groups ( n = 25 each) according to the type of movement employed with the ProTaper Next (PTN) instruments: Group A (alternating rotation) and Group B (continuous rotation). Canals were scanned before and after instrumentation using a CBCT scanner to evaluate root canal transportation and the centering ratio at 3, 5, and 7 mm from the apex. Data were analyzed statistically using Student's t -test; the significance level was set at P < 0.05., Results: There was no significant difference between the groups in canal transportation or the centering ratio at any of the three studied cross sections (3, 5, and 7 mm)., Conclusions: PTN instruments promoted minimal apical transportation and remained relatively centered within the root canal, with no significant difference between alternating and continuous rotation., Competing Interests: There are no conflicts of interest.

Background: The efficacy of endodontic irrigation procedures can be compromised by the complexity of the root canal system. Delivering irrigants to the apical third of curved canals presents a particular challenge to endodontists. This study compared the effects of two ultrasonic irrigation techniques on the penetration of sodium hypochlorite into the main canal and simulated lateral canals of curved roots in extracted teeth., Material and Methods: Two sets of simulated lateral canals were created at 2, 4, and 6 mm from the working length in 60 single-rooted teeth (6 canals/tooth, n = 360 canals). The teeth were randomly divided into three experimental irrigation groups: group 1 (n = 20), positive pressure irrigation (PPI); group 2 (n = 20), passive ultrasonic irrigation (PUI); and group 3 (n = 20), continuous ultrasonic irrigation (CUI). To assess the irrigation solution penetration, 20% Chinese ink (Sanford Rotring GmbH, Hamburg, Germany) was added to a 5% sodium hypochlorite solution and delivered into the curved root canals. The penetration of contrast solution into the simulated lateral canals was scored by counting the number of lateral canals (0-2) penetrated to at least 50% of the total length., Results: The CUI group showed significantly higher ( P < 0.05) irrigant penetration into the lateral canals and into the apical third of the main canals. The PPI group showed significantly lower sodium hypochlorite penetration ( P < 0.001) into the main and lateral canals compared with that in the CUI and PUI groups. Significantly higher irrigant penetration was observed in the PUI group than the PPI group., Conclusions: Using CUI as the final rinse significantly increased the penetration of irrigant solution into the simulated lateral canals and apical third of curved roots. Key words: Continuous ultrasonic irrigation, curved root canals, passive ultrasonic irrigation, positive pressure irrigation, root canal irrigation., Competing Interests: The authors deny any confict of interest.

Introduction: Radix entomolaris presents with an unusual morphology and is a rare occurrence. It is mainly observed in mandibular first molars. The incidence varies in different populations but it is far from common. This is especially true for mandibular second molars which possess the lowest prevalence. Some case reports have shown the presence of this finding in mandibular second molars; however, cases of patients of a white background have not been reported., Case Presentation: The diagnosis and treatment of an infected radix entomolaris in a mandibular second molar in a 45-year-old white man is presented. The diagnosis was made with standard endodontic techniques. Conventional radiographic imaging was augmented with cone-beam computed tomography scans and three-dimensional images which were constructed with dedicated software. The endodontic treatment was done using accepted endodontic procedures. Clinical and radiographic evidence of healing was seen after a 14-month follow-up., Conclusions: The implications of complex and unpredictable root anatomy are discussed in this report. The clinician should consider the possibility of encountering a mandibular second molar with a radix entomolaris. Cone-beam computed tomography is a useful tool in the diagnosis and improvement of root canal therapy.

Background: Age determination has great importance in many clinical decisions, being commonly used in odontopediatrics, orthodontics, pediatrics, and forensic medicine. The Nolla and Demirjian et al. methods have been used for these purposes. However, estimating chronological age by means of the dental mineralization stage is not a straightforward analysis, and it is fundamental to test the validity of these methods and their applicability to populations. In this article we intend to compare the accuracy of estimating chronological age from dental age measured with the Nolla and Demirjian methods in a Portuguese and Spanish sample, considering the variables of sex and age-group., Methods: The sample was composed of 821 orthopantomographs of healthy Portuguese (n = 270) and Spanish (n = 551) subjects from 4 to 34 years old. For the Nolla and Demirjian methods, seven mandibular left teeth were examined, staged according to the dental maturity scale of each method. We obtained a good index of inter-rater agreement, a good internal consistency for the teeth assessment, and a good temporal consistency., Results: Dental age was calculated for each method. The Demirjian et al. method tends to overestimate the real age of participants and the Nolla method tends to underestimate it. The accuracy of both methods varied between the sexes and age groups. Both methods were found to be more precise with males. As the age-group increases, the predictive capacities of both methods diminish. The Nolla method was more accurate than the Demirjian method in early and late childhood for both sexes. Neither method could predict chronological age in adults., Conclusions: We can estimate chronological age for early and late childhood, through the Nolla and Demirjian methods, with the former showing greater predictive capacities than the latter. The Demirjian method tends to overestimate age and the Nolla method tends to underestimate it, leading to the importance of forming regression equations adapted to the population studied. Nolla and Demirjian formulas adapted to our sample were created as a function of sex and age-group.

Recently, filling materials have been introduced based on the dentine adhesion technologies used in conservative dentistry in an attempt to seal the root canal more effectively. The purpose of this study was to investigate the interface between the canal and root-filling material. Sealing ability of four root canal obturation methods was analysed by means of scanning electron microscopy. Extracted single-rooted teeth were endodontically treated and filled with gutta-percha/Pulp Canal Sealer using the Thermafil (TH) technique, gutta-percha/Pulp Canal Sealer using the System B (SB) technique, Resilon points/RealSeal (RS) and RealSeal 1/RealSeal (RS1). Specimen interfaces were analysed using field-emission scanning electron microscopy. The adhesive groups RS and RS1, formed hybrid layers but showed areas of separation (gaps) similar to those in the conventional obturation groups. The RS and RS1 groups showed less separation in the coronal third, but the separation was similar to that in the TH and SB groups in the middle and apical thirds. The sealing ability of Resilon is not superior to that of existing materials., (© 2012 The Authors. Australian Endodontic Journal © 2012 Australian Society of Endodontology.)

Objective: The aim of this study was to compare the scanning electron microscopic (SEM) morphology of root canal walls instrumented manually and mechanically with and without the application of Er:YAG laser., Methods: Single-rooted, human, extracted teeth were cut at the cementoenamel junction. The teeth were divided into four groups: teeth that were simply instrumented manually, those that were instrumented manually and laser treated, a group that was mechanically instrumented, and a fourth in which the teeth were mechanically instrumented and laser treated. After instrumentation, the teeth were split longitudinally to facilitate their evaluation by SEM., Results: The results show that the use of the Er:YAG laser is effective in removing the smear layer from root canal walls., Conclusions: The removal of the smear layer is essential to the success of endodontic treatment; the use of the Er:YAG laser combined with rotary and manual techniques improves the cleanliness of root canals.

The case of a lateral maxillary incisor with a supplementary root fractured by external root resorption, is presented. The role played for the periodontal disease is shown in the clinical and radiographic achievements, and their implications in the pulpal disease. Endodontic therapy was performed and the diagnosis confirmed in the specimen histological research.

We have undertaken a scanning electron microscope study of the enamel surface of the third molar in adult patients. The enamel surface are partially covered by a thin cuticle. The arrangement of the enamel prisms was clearly observed in the basal region of the cusps.