Search

Entangled two-photon absorption (ETPA) may be a viable technique to continuously drive an excited state population in plasma for high-bandwidth spectroscopy measurements of localized plasma turbulence or impurity density. Classical two-photon absorption commonly requires a high-intensity, pulsed laser, but entangled photons with short entanglement time and high time correlation may allow for ETPA using a lower intensity, continuous-wave laser. Notably, ETPA with non-collinear entangled photon generation allows for cross-beam spatial localization of the absorption or fluorescence signal using a single laser source. Entangled photon generation, the ETPA cross-section, candidate transitions for an Ar-II species, and plans for a proof-of-principle measurement in a helicon plasma are discussed.

A common variant of a metasurface antenna consists of an array of metamaterial elements coupled to a waveguide feed. The guided wave excites the metamaterial elements, coupling energy from the waveguide mode to radiation. Under appropriate conditions, each sub-wavelength metamaterial element can be modeled as a polarizable dipole, with the polarizability determined by an extraction procedure from the computed or measured waveguide scattering parameters. Here we establish the equivalence of this polarizability description of a metamaterial element with an equivalent circuit model, providing an additional tool for metasurface design that offers significant insight and a path towards efficiently modeling very large apertures. With this equivalence established, more complicated external circuits that include lumped elements and devices such as diodes and transistors can be integrated into the metamaterial element, which can then be transformed into an equivalent polarizability for modeling in the coupled dipole framework. We derive appropriate circuit models for several basic metamaterial elements, which provide direct relationships between the equivalent circuit parameters of an element and its effective polarizability. These expressions are confirmed using scattering parameters for several example structures obtained via full-wave simulations.

We demonstrate low-frequency interferometric impulsive stimulated Raman scattering (ISRS) imaging with high robustness to distortions by optical scattering. ISRS is a pump-probe coherent Raman spectroscopy that can capture Raman vibrational spectra. Recording of ISRS spectra requires isolation of a probe pulse from the pump pulse. While this separation is simple in non-scattering specimens, such as liquids, scattering leads to significant pump pulse contamination and prevent the extraction of a Raman spectrum. We introduce a robust method for ISRS microscopy that works in complex scattering samples. High signal-to-noise ISRS spectra are obtained even when the pump and probe pulses pass through many scattering layers., Comment: 13 pages; 5 figures

The opening of the millimeter wave (mmWave) spectrum bands for 5G communications has motivated the need for novel spectrum sharing solutions at these high frequencies. In fact, reconfigurable intelligent surfaces (RISs) have recently emerged to enable spectrum sharing while enhancing the incumbents' quality-of-service (QoS). Nonetheless, co-existence over mmWave bands remains persistently challenging due to their unfavorable propagation characteristics. Hence, initiating mmWave spectrum sharing requires the RIS to further assist in improving the QoS over mmWave bands without jeopardizing spectrum sharing demands. In this paper, a novel simultaneous transmitting and reflecting RIS (STAR-RIS)-aided solution to enable mmWave spectrum sharing is proposed. In particular, the transmitting and reflecting abilities of the STAR-RIS are leveraged to tackle the mmWave spectrum sharing and QoS requirements separately. The STAR-RIS-enabled spectrum sharing problem between a primary network (e.g. a radar transmit-receive pair) and a secondary network is formulated as an optimization problem whose goal is to maximize the downlink sum-rate over a secondary multiple-input-single-output (MISO) network, while limiting interference over a primary network. Moreover, the STAR-RIS response coefficients and beamforming matrix in the secondary network are jointly optimized. To solve this non-convex problem, an alternating iterative algorithm is employed, where the STAR-RIS response coefficients and beamforming matrix are obtained using the successive convex approximation method. Simulation results show that the proposed solution outperforms conventional RIS schemes for mmWave spectrum sharing by achieving a 14.57% spectral efficiency gain.

Fusion power production in tokamaks uses discharge configurations that risk producing strong Type I Edge Localized Modes. The largest of these modes will likely increase impurities in the plasma and potentially damage plasma facing components such as the protective heat and waste divertor. Machine learning-based prediction and control may provide for online mitigation of these damaging modes before they grow too large to suppress. To that end, large labeled datasets are required for supervised training of machine learning models. We present an algorithm that achieves 97.7% precision when automatically labeling Edge Localized Modes in the large DIII-D tokamak discharge database. The algorithm has no user controlled parameters and is largely robust to tokamak and plasma configuration changes. This automatically-labeled database of events can subsequently feed future training of machine learning models aimed at autonomous Edge Localized Mode control and suppression., Comment: 7 pages, 6 figures

We present the design and fabrication of 3D printed holographic beamforming antennas. The antennas utilize additively manufactured hollow rectangular waveguides that feed radiating rectilinear slots inserted into the upper conducting wall. The lengths of the individual slots are altered to implement a holographic beamforming solution designed using a coupled dipole formalism. For rapid verification, the designed antennas are fabricated using a desktop dual-extrusion fused filament 3D printer. The body of each antenna and its inner conducting surface are respectively printed using polylactic acid and biodegradable conductive polyester composite material (i.e., Electrifi), which is later deposited with a layer of copper on its surface to improve surface conductivity and reduce surface roughness. The beamforming performance of the fabricated antennas is confirmed via experiments. The 3D printed metasurface antennas using the proposed fabrication technique illustrate emerging capabilities in the rapid prototyping of complex electromagnetic structures.

We present the design of a phased, modulated, power distribution network for metasurface array antennas. The specific metasurface array design comprises a series of waveguides, each feeding a sub-array of dynamically tunable metamaterial elements that radiate at microwave (X-band) frequencies. To remain a one-port device, the composite array requires a power divider that can excite each branch waveguide with equal power. Further, the power divider must also apply a prescribed phase shift to each branch waveguide to mitigate metasurface-specific grating lobes. The presented design features hollow metal waveguides, with a conducting sheet patterned with metamaterial irises serving as the upper wall. A single hollow metal main waveguide feed is used to couple power to each of the branch waveguide. Carefully oriented slots control both the magnitude and phase of the field distributed from the main feed to each branch. All waveguides can be machined from a single block of metal, with a metamaterial-patterned printed circuit board laminated to the top of the assembly. The resulting design is mechanically robust and capable of high power operation while retaining the low-cost, low-power consumption, lightweight, and low-profile features common in metasurface antenna designs.

We propose and numerically validate a patch reflectarray modeling approach suitable for small patches that describes each patch as a pair of polarizable magnetic dipoles. We introduce an extraction technique to obtain the effective polarizability of the patch dipoles via full-wave simulations on individual patches, followed by a beamforming design routine valid under weakly scattering configurations. This dipole framework serves as an alternative to the ray tracing model often used in reflectarray designs, in which rays are drawn from the feed point and scattered off of the patch elements. Whereas the ray tracing method solves the design problem in terms of phase delays, the dipole framework presented here has the potential to accurately design and predict beam patterns using a fully dipolar treatment of empirically characterized patches. We illustrate this technique by applying it to two modulation strategies: a variable patch size reflectarray in which the phase can be continuously tuned (grayscale patch response), and a fixed patch size (binary patch response) in which on/off modulation is achieved through selective patch electrical shorting. Methods for incorporating these cases into the dipole design framework are discussed and the results compared to those from full wave simulation., Comment: 10 pages, 10 figures

We present a design strategy for selecting the effective polarizability distribution for a metasurface aperture needed to form a desired radiation pattern. A metasurface aperture consists of an array of subwavelength metamaterial elements, each of which can be conceptualized as a radiating, polarizable dipole. An ideal polarizability distribution can be determined by using a holographic approach to first obtain the necessary aperture fields, which can then be converted to a polarizability distribution using equivalence principles. To achieve this ideal distribution, the polarizability of each element would need to have unconstrained magnitude and phase; however, for a single, passive, metamaterial resonator the magnitude and phase of the effective polarizability are inextricably linked through the properties of the Lorentzian resonance, with the range of phase values restricted to a span of at most 180 degrees. Here, we introduce a family of mappings from the ideal to the available polarizability distributions, easily visualized by plotting both polarizabilities in the complex plane. Using one of these mappings it is possible to achieve highly optimized beam patterns from a metasurface antenna, despite the inherent resonator limitations. We introduce the mapping technique and provide several specific examples, with numerical simulations used to confirm the design approach., Comment: 14 pages, 14 figures. To be submitted to Physical Review Applied

We have combined atomic layer lithography and template stripping to produce a new class of substrates for surface-enhanced infrared absorption (SEIRA) spectroscopy. Our structure consists of a buried and U-shaped metal-insulator-metal waveguide whose folded vertical arms efficiently couple normally incident light. The insulator is formed by atomic layer deposition (ALD) of Al2O3 and precisely defines the gap size. The buried nanocavities are protected from contamination by a silicon template until ready for use and exposed by template stripping on demand. The exposed nanocavity generates strong infrared resonances, tightly confines infrared radiation into a gap that is as small as 3 nm ({\lambda}/3300), and creates a dense array of millimeter-long hotspots. After partial removal of the insulators, the gaps are backfilled with benzenethiol molecules, generating distinct Fano resonances due to strong coupling with gap plasmons, and a SEIRA enhancement factor of 10^5 is observed for a 3 nm gap. Because of the wafer-scale manufacturability, single-digit-nanometer control of the gap size via ALD, and long-term storage enabled by template stripping, our buried plasmonic nanocavity substrates will benefit broad applications in sensing and spectroscopy.

We present a systematic design method for a cylindrical conformal array of rectangular waveguide-fed metasurfaces. The conformal metasurface consists of multiple curved rectangular waveguides loaded with metamaterial elements\textemdash electrically small irises\textemdash inserted into the upper conducting walls of the waveguides. Each element radiates energy into free space to contribute to an overall radiation pattern. Thus, the geometry or electrical configuration of each of the individual metamaterial elements needs to be tailored to generate a desired pattern. In general, due to difficulties in modeling the effect of curvature, the design of conformal metasurface arrays has relied on full-wave simulations or experiments. In this study, we propose a design method utilizing the analytic model of a planar metasurface accounting for metamaterial elements' locations and orientations over a surface with curvature. Although approximate, we demonstrate that such an alteration along with the framework of dipolar modeling of planar elements can be used for the analysis of conformal arrays with small curvature. We then design a conformal array metasurface using the method combined with CMA-ES optimizer. Through numerical simulations, we confirm the validity of the proposed design method. Applications include the design of metasurfaces for radar, communications, and imaging systems for automobiles and airplanes.

We propose an uplink massive MIMO system using an array of holographic metasurfaces as a sector antenna. The antenna consists of a set of rectangular waveguide-fed metasurfaces combined along the elevation direction into a planar aperture, each with subwavelength-sized metamaterial elements as radiators. The metamaterial radiators are designed such that the waveguide-fed metasurface implements a holographic solution for the guided (or reference) mode, generating a fan beam towards a prescribed direction, thereby forming a multibeam antenna system. We demonstrate that a narrowband uplink massive MIMO system using the metasurfaces can achieve the sum capacity close to that offered by the Rayleigh channel at 3.5 GHz. We show that metasurfaces supporting multiple fan beams can achieve high spatial resolution in the azimuth directions in sub-6 GHz channels, and thereby form uncorrelated MIMO channels between the base station and users. Also, the proposed metasurface antenna is structurally simple, low-cost, and efficient, and thus is suitable to alleviate RF hardware issues common to massive MIMO systems equipped with a large antenna system.

We show experimentally that the fundamental ingredient of wave-based signal differentiation, namely zeros of the scattering matrix that lie exactly on the real axis, can be imposed at will and in situ by purposefully perturbing an overmoded random scattering system. The resulting unprecedented flexibility overcomes current limitations of wave-based differentiators, both regarding their extreme vulnerability due to fabrication inaccuracies or environmental perturbations as well as their lack of in situ adaptability. Moreover, in addition to current miniaturization efforts, we suggest that integrability of wave processors can also be achieved by endowing existing bulky everyday-life systems that naturally scatter waves with a second signal-processing functionality. We demonstrate our technique by placing a programmable metasurface inside a 3D disordered metallic box: the hundreds of available degrees of freedom allow us to impose at will reflection zeros on a connected port, such that the reflected signal envelope is the temporal derivative of the incident one. We demonstrate our ability to toggle between differentiation of envelopes modulated onto distinct carriers. We also parallelize multiple differentiation operations on the same device and implement higher-order differentiators. Our "over-the-air" temporal differentiator for microwave carriers may find civilian and military applications in processing wireless communication or radar signals, for data segmentation and compression, as well as machine vision and hearing. Our generic concept is also applicable to optical, acoustic, and elastic scattering., Comment: 29 pages including 4 figures + 27 pages Supplementary Materials

Mobile devices, climate science, and autonomous vehicles all require advanced microwave antennas for imaging, radar, and wireless communications. The cost, size, and power consumption of existing technology, however, has hindered the ubiquity of electronically steered systems. Here, we propose a metasurface antenna design paradigm that enables electronic beamsteering from a passive lightweight circuit board with varactor-tuned elements. Distinct from previous metasurfaces (which require dense element spacing), the proposed design uses Nyquist spatial sampling of half a wavelength. We detail the design of this Nyquist metasurface antenna and experimentally validate its ability to electronically steer in two directions. Nyquist metasurface antennas can realize high performance without costly and power hungry phase shifters, making them a compelling technology for future antenna hardware.

Next generation wireless base stations and access points will transmit and receive using extremely massive numbers of antennas. A promising technology for realizing such massive arrays in a dynamically controllable and scalable manner with reduced cost and power consumption utilizes surfaces of radiating metamaterial elements, known as metasurfaces. To date, metasurfaces are mainly considered in the context of wireless communications as passive reflecting devices, aiding conventional transceivers in shaping the propagation environment. This article presents an alternative application of metasurfaces for wireless communications as active reconfigurable antennas with advanced analog signal processing capabilities for next generation transceivers. We review the main characteristics of metasurfaces used for radiation and reception, and analyze their main advantages as well as their effect on the ability to reliably communicate in wireless networks. As current studies unveil only a portion of the potential of metasurfaces, we detail a list of exciting research and implementation challenges which arise from the application of metasurface antennas for wireless transceivers.

Achieving the very special condition of perfect absorption (PA) in a complex scattering enclosure promises to enable a wealth of applications in secure communication, precision sensing, wireless power transfer, analog signal processing and random lasing. Consequently, a lot of recent research effort was dedicated to proposing wave-front shaping protocols to implement coherent PA in a complex scattering environment. Here, instead of shaping the impinging wave front and tuning the system's attenuation, we propose the conceptually different route of solely tweaking the randomness of the complex scattering environment in order to achieve PA. We provide an experimental proof-of-concept in the microwave domain where we tune the randomness of a three-dimensional chaotic cavity with a programmable metasurface. We systematically investigate the achievability and extreme sensitivity of the PA condition. Our technique can impose a PA condition at over hundred distinct frequencies within a small frequency band, which allows us to propose and experimentally demonstrate a concrete practical application: receiver-powered secure wireless communication in a complex scattering enclosure. Our fundamentally new perspective on PA is applicable to all types of wave phenomena and our results foreshadow the large potential of this novel tool for minute wave control in sensing, communication and energy transfer., Comment: Original version of the manuscript submitted for peer review; 21 pages, 3 figures; Supplementary Information with 18 pages is included at the end of the file; source files in Word format have been converted to PDF

Acoustic-graphene-plasmons (AGPs) are highly confined electromagnetic modes, carrying large momentum and low loss in the mid-infrared/Terahertz spectra. Owing to their ability to confine light to extremely small dimensions, they bear great potential for ultra-strong light-matter interactions in this long wavelength regime, where molecular fingerprints reside. However, until now AGPs have been restricted to micron-scale areas, reducing their confinement potential by several orders-of-magnitude. Here, by utilizing a new type of graphene-based magnetic-resonance, we realize single, nanometric-scale AGP cavities, reaching record-breaking mode-volume confinement factors of $\thicksim5\cdot10^{-10}$. This AGP cavity acts as a mid-infrared nanoantenna, which is efficiently excited from the far-field, and electrically tuneble over an ultra-broadband spectrum. Our approach provides a new platform for studying ultra-strong-coupling phenomena, such as chemical manipulation via vibrational-strong-coupling, and a path to efficient detectors and sensors, in this challenging spectral range.

Recent results have shown unprecedented control over separation distances between two metallic elements hundreds of nanometers in size, underlying the effects of free-electron nonlocal response also at mid-infrared wavelengths. Most of metallic systems however, still suffer from some degree of inhomogeneity due to fabrication-induced surface roughness. Nanoscale roughness in such systems might hinder the understanding of the role of microscopic interactions. Here we investigate the effect of surface roughness in coaxial nanoapertures resonating at mid-infrared frequencies. We show that although random roughness shifts the resonances in an unpredictable way, the impact of nonlocal effects can still be clearly observed. Roughness-induced perturbation on the peak resonance of the system shows a strong correlation with the effective gap size of the individual samples. Fluctuations due to fabrication imperfections then can be suppressed by performing measurements on structure ensembles in which averaging over a large number of samples provides a precise measure of the ideal system's optical properties.

The combination of orthogonal frequency modulation (OFDM) and multiple-input multiple-output (MIMO) systems plays an important role in modern communication systems. In order to meet the growing throughput demands, future MIMO-OFDM receivers are expected to utilize a massive number of antennas, operate in dynamic environments, and explore high frequency bands, while satisfying strict constraints in terms of cost, power, and size. An emerging technology to realize massive MIMO receivers of reduced cost and power consumption is based on dynamic metasurface antennas (DMAs), which inherently implement controllable compression in acquisition. In this work we study the application of DMAs for MIMO-OFDM receivers operating with bit-constrained analog-to-digital converters (ADCs). We present a model for DMAs which accounts for the configurable frequency selective profile of its metamaterial elements, resulting in a spectrally flexible hybrid structure. We then exploit previous results in task-based quantization to show how DMAs can be configured to improve recovery in the presence of constrained ADCs, and propose methods for adjusting the DMA parameters based on channel state information. Our numerical results demonstrate that the DMA-based receiver is capable of accurately recovering OFDM signals. In particular, we show that by properly exploiting the spectral diversity of DMAs, notable performance gains are obtained over existing designs of conventional hybrid architectures, demonstrating the potential of DMAs for MIMO-OFDM setups in realizing high performance massive antenna arrays of reduced cost and power consumption.

We introduce the first method to enable an optical amplification of a coherent Raman spectroscopy signal called radio frequency Doppler Raman spectroscopy. Doppler Raman measurements amplify the optical signals in coherent Raman spectroscopy by converting a spectral frequency shift imparted by an impulsive coherent Raman excitation to a change in a probe pulse transit time. This transit time perturbation is detected through the phase of a radio frequency electronic signal measured at a harmonic of the probe pulse train. By exploiting this new capability to scale the signal of a coherent Raman spectroscopic signal, we open the potential to detect very weak Raman spectroscopy signals that are currently not observable due to limits of illumination intensity imposed by laser damage to the specimen.

We present the design, fabrication, and experimental characterization of a two-dimensional, dynamically tuned, metasurface aperture, emphasizing its potential performance in computational imaging applications. The dynamic metasurface aperture (DMA) consists of an irregular, planar cavity that feeds a multitude of tunable metamaterial elements, all fabricated in a compact, multilayer printed circuit board process. The design considerations for the metamaterial element as a tunable radiator, the associated biasing circuitry, as well as cavity parameters are examined and discussed. A sensing matrix can be constructed from the measured transmit patterns, the singular value spectrum of which provides insight into the information capacity of the apertures. We investigate the singular value spectra of the sensing matrix over a variety of operating parameters, such as the number of metamaterial elements, number of masks, and number of radiating elements. After optimizing over these key parameters, we demonstrate computational microwave imaging of simple test objects.

We address the fundamental question of how to optimally probe a scene with electromagnetic (EM) radiation to yield a maximum amount of information relevant to a particular task. Machine learning (ML) techniques have emerged as powerful tools to extract task-relevant information from a wide variety of EM measurements, ranging from optics to the microwave domain. However, given the ability to actively illuminate a particular scene with a programmable EM wavefront, it is often not clear what wavefronts optimally encode information for the task at hand (e.g., object detection, classification). Here, we show that by integrating a physical model of scene illumination and detection into a ML pipeline, we can jointly learn optimal sampling and measurement processing strategies for a given task. We consider in simulation the example of classifying objects using microwave radiation produced by dynamic metasurfaces. By integrating an analytical forward model describing the metamaterial elements as coupled dipoles into the ML pipeline, we jointly train analog model weights with digital neural network weights. The learned non-intuitive illumination settings yield a higher classification accuracy using fewer measurements. On the practical level, these results are highly relevant to emerging context-aware systems such as autonomous vehicles, touchless human-interactive devices or within smart health care, where strict time constraints place severe limits on measurement strategies. On the conceptual level, our work serves as a bridge between wavefront shaping and tunable metasurface design on the physical layer and ML techniques on the processing layer., Comment: 14 pages including 5 figures + 6 pages Supplemental Material

Metasurface antenna arrays, formed by tiling multiple metasurface subapertures, offer an alternative architecture to electrically large beamsteering arrays often used in radar and communications. The advantages offered by metasurfaces are enabled by the use of passive, tunable radiating elements. While these metamaterial elements do not exhibit the full range of phase tuning as can be obtained with phase shifters, they can be engineered to provide a similar level of performance with much lower power requirements and circuit complexity. Due to the limited phase and magnitude control, however, larger metasurface apertures can be susceptible to strong grating lobes which result from an unwanted periodic magnitude response that accompanies an ideal phase pattern. In this work, we combine antenna theory with analytical modeling of metamaterial elements to mathematically reveal the source of such grating lobes. To circumvent this problem, we introduce a compensatory waveguide feed layer designed to suppress grating lobes in metasurface antennas. The waveguide feed layer helps metasurface antennas approach the performance of phased arrays from an improved hardware platform, poising metasurface antennas to impact a variety of beamforming applications.

Massive multiple-input multiple-output (MIMO) communications are the focus of considerable interest in recent years. While the theoretical gains of massive MIMO have been established, implementing MIMO systems with large-scale antenna arrays in practice is challenging. Among the practical challenges associated with massive MIMO systems are increased cost, power consumption, and physical size. In this work we study the implementation of massive MIMO antenna arrays using dynamic metasurface antennas (DMAs), an emerging technology which inherently handles the aforementioned challenges. Specifically, DMAs realize large-scale planar antenna arrays, and can adaptively incorporate signal processing methods such as compression and analog combining in the physical antenna structure, thus reducing the cost and power consumption. We first propose a mathematical model for massive MIMO systems with DMAs and discuss their constraints compared to ideal antenna arrays. Then, we characterize the fundamental limits of uplink communications with the resulting systems, and propose two algorithms for designing practical DMAs for approaching these limits. Our numerical results indicate that the proposed approaches result in practical massive MIMO systems whose performance is comparable to that achievable with ideal antenna arrays.