893 results on '"Sanjayan, Jay"'
Search Results
2. Active Rheology Control of Concrete Using Encapsulated Accelerator as Responsive Additives for Concrete 3D Printing
3. Alkali-Activated Waste Glass-Based Geopolymer Concrete for Digital Construction
4. Two-Part Print Head Mixing of Hybrid Alkali-Activated Cement for Buildability Enhancement in 3D Concrete Printing
5. Application of Textile Reinforcement for 3D Concrete Printed Structures
6. Set-on-Demand Geopolymer for Concrete 3D Printing Using Ternary Activator
7. Waste Clay Brick Binders for Low-Carbon Concrete Pavement Construction
8. Tensile stress-strain models for steel fiber reinforced concrete
9. Thermal performance and life cycle analysis of 3D printed concrete wall building
10. Pumping-less 3D concrete printing using quick nozzle mixing
11. Impact and potential of reclaimed water-based paint in concrete
12. Encapsulation of sodium silicate to attain on demand buildability enhancement in concrete 3D printing
13. Impact response of textile-reinforced 3D printed concrete panels
14. In-process textile reinforcement method for 3D concrete printing and its structural performance
15. Enhancing interlayer bonding strength of 3D printed ternary geopolymer using calcium carbonate whiskers spray
16. Printhead mixing of geopolymer and OPC slurries for hybrid alkali-activated cement in 3D concrete printing
17. Bond-slip behaviour of textile-reinforcement in 3D printed concrete
18. Quick nozzle mixing technology for 3D printing foam concrete
19. Investigating PCM encapsulated NaOH additive for set-on-demand in 3D concrete printing
20. Waste Clay Brick as a Part Binder for Pavement Grade Geopolymer Concrete
21. Development of lightweight alkali-activated composites incorporating cenopsheres: Exhibiting high strength/density ratio and low thermal conductivity
22. Rapid early age strength development of in-line activated geopolymer for concrete 3D printing
23. Pore structure profile of ambient temperature-cured geopolymer concrete and its effect on engineering properties
24. Shrinkage model for waste clay brick-based geopolymer concrete
25. Development of sustainable heat resistive and storage panels for building envelope: An experimental and numerical study
26. Robust trajectory tracking control for cable-driven parallel robots with model uncertainty
27. Tensile performance of cast-in headed studs in thin concrete panels with void formers
28. Considerations and recommendations for improving the curved concrete fabrication using pin and bed method
29. The ambient and elevated temperature performance of hemp fibre reinforced alkali-activated cement foam: Effects of fibre dosage and alkali treatment
30. Effect of Magnetorheological additives on the buildability of 3D concrete printing
31. Surfactants to enable quick nozzle mixing in 3D concrete printing
32. Mechanisms of rheological modifiers for quick mixing method in 3D concrete printing
33. Comparative analysis of form-stable phase change material integrated concrete panels for building envelopes
34. One-Year study of restrained shrinkage and creep behaviours of geopolymer concrete
35. Using Fibre recovered from face mask waste to improve printability in 3D concrete printing
36. Applications of natural and synthetic fiber reinforced polymer in infrastructure: A suitability assessment
37. 3D concrete printing of eco-friendly geopolymer containing brick waste
38. Experimental and numerical investigation of novel light weight concrete panels made with aerogel and phase change materials
39. Extrusion nozzle design and print parameter selections for 3D concrete printing
40. Set-On Demand Concrete by Activating Encapsulated Accelerator for 3D Printing
41. Fresh and Hardened Properties of 3D Printable Foam Concrete Containing Porous Aggregates
42. Waste Clay Brick Binders for Rigid Pavement Subbase and Base Concretes
43. Building Adaptation to Extreme Heatwaves
44. Rheological characterization of ultra-high performance concrete for 3D printing
45. In-line activation of geopolymer slurry for concrete 3D printing
46. Effects of cement mortar characteristics on aggregate-bed 3D concrete printing
47. Enhancing the properties of foam concrete 3D printing using porous aggregates
48. Effect of steel slag on 3D concrete printing of geopolymer with quaternary binders
49. Understanding and eliminating of expansion caused by recycled glass fiber reinforced plastic powder in concrete
50. In-line activation of cementitious materials for 3D concrete printing
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.