Search

While remarkable progress has been made in the development of peptide medicines, many problems related to peptide synthesis remain unresolved. Previously, we reported electrochemical peptide synthesis using a phosphine as a potentially recyclable coupling reagent. However, there was room for improvement from the point of view of reaction efficiency, especially in the carboxylic acid activation step and the peptide bond formation step. To overcome these challenges, we searched for the optimal phosphine. Among phosphines with various electronic properties, we found that electron-rich triaryl phosphines improved the reaction efficiency. Consequently, we successfully performed electrochemical peptide synthesis on sterically hindered and valuable amino acids. We also synthesized oligopeptides that were challenging with our previous method. Finally, we examined the effect of substituents on the phosphine cations, and gained some insights into reactivity, which will aid researchers designing reactions involving phosphine cations., (© 2024 Wiley-VCH GmbH.)

Mononuclear phosphinite Iridium complexes based on ferrocene group have been prepared and characterized by various spectroscopic techniques. The complexes were subjected to cyclic voltammetry studies in order to determine the energies of HOMO and LUMO levels and to estimate their electrochemical and some electronic properties. Organic complex-based memory substrates were immobilized using TiO 2 -modified ITO electrodes, and the memory functions of phosphinite-based organic complexes were verified by chronoamperometry (CA) and open-circuit potential amperometry (OCPA). Extensive theoretical and experimental investigations were directed to gain a more profound understanding of the chemical descriptors and the diverse electronic transitions taking place within the iridium complexes, as well as their electrochemical characteristics. The quantum chemical calculations were carried out for the iridium complexes at the DFT/CAM-B3LYP level of theory in the gas phase. Furthermore, the antioxidant, antimicrobial, DNA binding, and DNA cleavage activities of the complexes were tested. Complex 2 exhibited the highest radical scavenging activity (67.5 ± 2.24 %) at 200.0 mg/L concentration. It was observed that the complexes formed an inhibition zone in the range of 8-15 mm against Gram + bacteria and in the range of 0-13 mm against Gram - bacteria. The agarose gel electrophoresis method was used to determine the DNA binding and DNA cleavage activities of the complexes. All of the tested complexes had DNA binding activity; however, complexes 1, 2, and 8 showed better binding activity than the others., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Novel catalysts with multiple active sites and rapid separation are required to effectively activate peroxymonosulfate (PMS) for the removal of organic pollutants from water. Therefore, an integrated catalyst for PMS activation was developed by directly forming Co-Fe Prussian blue analogs on a three-dimensional porous nickel foam (NF), which were subsequently phosphorylated to obtain cobalt-iron bimetallic phosphide (FeCoP@NF). The FeCoP@NF/PMS system efficiently degraded dye wastewater within 20 min. The system exhibited excellent catalytic degradation over a broad pH range and at high dye concentrations due to the presence of unique asymmetrically charged Co a+ and P b- dual active sites formed by cobalt phosphides within FeCoP@NF. These active sites significantly enhanced the catalytic activity of PMS. The activation mechanism of PMS involves phosphorylation that accelerates electron transfer from FeCoP@NF to PMS, to generate SO 4 · - , ·OH, O 2 · - , and 1 O 2 active species. Three-dimensional FeCoP@NF could be readily recycled and showed good stability for PMS activation. In this study, a highly efficient, stable, and readily recyclable integrated catalyst was developed. This catalyst system effectively resolves the separation and recovery issues associated with conventional powder catalysts and has a wide range of potential applications in wastewater treatment., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Dopamine (DA) is a very imperative neurotransmitter in our body, since it contributes to several physiological processes in our body, for example, memory, feeling, cognition, cardiovascular diseases, and hormone secretion. Meanwhile, tyrosinase is a critical biomarker for several dangerous skin diseases, including vitiligo and melanoma cancer. Most of the reported chemiluminescent (CL) methods for monitoring DA and tyrosinase are signal-off biosensors. Herein, we introduce a new chemiluminescent "signal-on" system, lucigenin-tris(hydroxypropyl)phosphine (THPP), for the selective determination of DA and tyrosinase. THPP is well known as a versatile and highly water-soluble sulfhydryl-reducing compound that is more highly stable against air oxidation than common disulfide reductants. By employing THPP for the first time as an efficient lucigenin coreactant, the lucigenin-THPP system has shown a high CL response (approximately 16-fold) compared to the lucigenin-H 2 O 2 classical CL system. Surprisingly, DA can remarkably boost the CL intensity of the lucigenin-THPP CL system. Additionally, tyrosinase can efficiently catalyze the conversion of tyramine to DA. Therefore, lucigenin-THPP was employed as an ultrasensitive and selective signal-on CL system for the quantification of DA, tyrosinase, and THPP. The linear ranges for the quantification of DA, tyrosinase, and THPP were 50-1000 nM, 0.2-50 μg/mL, and 0.1-800 μM, respectively. LODs for DA and tyrosinase were estimated to be 24 nM and 0.18 μg/mL, respectively. Additionally, the CL system has been successfully employed for the detection of tyrosinase in human serum samples and the assay of DA in human serum samples as well as in dopamine injection ampules with excellent obtained recoveries.

To ascertain the bioinorganic chemistry of metals conjugated with quinones, the complexes [Ag(ATV)(PPh 3 ) 2 ] ( 1 ), [Au(ATV)(PPh 3 )]·2H 2 O ( 2 ), and [Cu(ATV)(PPh 3 ) 2 ] ( 3 ) were synthesized by the coordination of the antimalarial naphthoquinone atovaquone (ATV) to the starting materials [Ag(PPh 3)2 ]NO 3 , [Au(PPh 3 )Cl], and [Cu(PPh 3 ) 2 NO 3 ], respectively. These complexes were characterized by analytical and spectroscopical techniques. X-ray diffraction of single crystals precisely confirmed the coordination mode of ATV to the metals, which was monodentate or bidentate, depending on the metal center. Both coordination modes showed high stability in the solid state and in solution. All three complexes showed negative log D values at pH 5, but at pH 7.4, while complex 2 continued to have a negative log D value, complexes 1 and 3 displayed positive values, indicating a more hydrophilic character. ATV and complexes 1 - 3 could bind to ferriprotoporphyrin IX (FePPIX); however, only complexes 1 - 3 could inhibit β-hematin crystal formation. Phenotype-based activity revealed that all three metal complexes are able to inhibit the growth of P. falciparum with potency and selectivity comparable to those of ATV, while the starting materials lack this activity. The outcomes of this chemical design may provide significant insights into structure-activity relationships for the development of new antimalarial agents.

A series of arylsulfones and heteroarylsulfones have previously been demonstrated to dysregulate the conserved bacterial ClpP protease, causing the unspecific degradation of essential cellular housekeeping proteins and ultimately resulting in cell death. A cocrystal structure of a 2-β-sulfonylamide analog, ACP1-06, with Escherichia coli ClpP showed that its 2-pyridyl sulfonyl substituent adopts two orientations in the binding site related through a sulfone bond rotation. From this, a new bis -aryl phosphine oxide scaffold, designated as ACP6, was designed based on a "conformation merging" approach of the dual orientation of the ACP1-06 sulfone. One analog, ACP6-12, exhibited over a 10-fold increase in activity over the parent ACP1-06 compound, and a cocrystal X-ray structure with ClpP confirmed its predicted binding conformation. This allowed for a comparative analysis of how different ligand classes bind to the hydrophobic binding site. The study highlights the successful application of structure-based rational design of novel phosphine oxide-based antibiotics.

The development of a robust electrocatalyst for the electrochemical sensor for hazardous pesticides will reduce its effects on the ecosystem. Herein, we synthesized the robust manganese cobalt phosphide (MnCoP) - Core-shell as an electrochemical sensor for the determination of hazardous pesticide methyl parathion (MP). The MnCoP- Core-shell was prepared with the sustainable self-template route can help with the larger surface area. The Core-shell structure of MnCoP possesses a higher active surface area which increases the electrocatalytic performance and is utilized to improve the electrochemical MP reduction with the synergism of the core and shell structure. Remarkably, it realizes the higher sensitivity (0.014 μA μM -1  cm -2 ) of MnCoP- Core-shell/GCE achieves towards MP with lower limit of detection (LoD 50 nM) and exceptional recovery rate of MP in vegetable samples are achieved with the differential pulse voltammetry (DPV) technique. The MnCoP- Core-shell electrode reserved their superior electrochemical performances with high reproducibility and repeatability. This prominent activity of the MnCoP core-shell towards the MP in real sample analysis, makes it a promising electrochemical sensor for the detection of MP., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Background: Transition metal phosphides with properties similar to platinum metal have received increasing attention for the non-enzymatic detection of glucose. However, the requirement of highly corrosive reagent during sample pretreatment would impose a potential risk to the human body, limiting their practical applications., Results: In this study, we report a self-powered microfluidic device for the non-enzymatic detection of glucose using nickel phosphide (Ni 2 P) hybrid as the catalyst. The Ni 2 P hybrid is synthesized by pyrolysis of metal-organic framework (MOF)-based precursor and in-situ phosphating process, showing two linear detection ranges (1 μM-1 mM, 1 mM-6 mM) toward glucose with the detection limit of 0.32 μM. The good performance of Ni 2 P hybrid for glucose is attributed to the synergistic effect of Ni 2 P active sites and N-doped porous carbon matrix. The microchip is integrated with a NaOH-loaded paper pad and a capillary-based micropump, enabling the automatic NaOH redissolution and delivery of sample solution into the detection chamber. Under the optimized condition, the Ni 2 P hybrid-based microchip realized the detection of glucose in a user-friendly way. Besides, the feasibility of using this microchip for glucose detection in real serum samples has also been validated., Significance: This article presents a facile fabrication method utilizing a MOF template to synthesize a Ni 2 P hybrid catalyst. By leveraging the synergy between the Ni 2 P active sites and the N-doped carbon matrix, an exceptional electrochemical detection performance for glucose has been achieved. Additionally, a self-powered chip device has been developed for convenient glucose detection based on the pre-established high pH environment on the chip., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Herein, we present a comprehensive review focusing on synthetic strategies, detailed structural analysis, and anticancer activity investigations of complexes following the general formula [L n M(μ-diphosphine)M'L m ] where M = group 8 metal; M' = any transition metal; μ-diphosphine = bridging ligand; L n and L m  = ligand spheres). Both homo- and heteromultimetallic complexes will be discussed in detail. We review in vitro, in vivo and in silico anticancer activity investigations, in an attempt to draw comparisons between the various complexes and derive structure-activity relationships (SAR). This review solely focuses on complexes falling under the general formula stated above that have been studied for their anticancer activities, other complexes falling into that scheme but which have not undergone anticancer testing are not included in this review. We compare the anticancer activities of these complexes to their mononuclear counterparts, and a positive control (cisplatin) when possible and present a summary of all existing data to date and attempt to draw some conclusions on the future development of these complexes., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Masson SAS.. All rights reserved.)

The elucidation of metal-dependent biological processes requires selective reagents for manipulating metal ion levels within biological solutions such as growth media or cell lysates. To this end, we immobilized a phosphine sulfide-stabilized phosphine (PSP) ligand on agarose to create a resin for the selective removal of copper from chemically complex biological media through simple filtration or centrifugation. Comprised of a conformationally preorganized phenylene-bridged backbone, the PSP-ligand binds Cu(I) with a 1:1 stoichiometry and exhibits a pH-independent Cu(I) dissociation constant in the low zeptomolar range. Neither Zn(II), Fe(II), nor Mn(II) interact with the ligand at millimolar concentrations, thus offering a much-improved selectivity towards copper over other commonly employed solid-supported chelators such as Chelex 100. As revealed by X-ray fluorescence elemental analysis, the immobilized chelator effectively removes copper from cell culture growth media and cell lysate isolated from mouse fibroblasts. In addition to preparing copper-depleted media or cell lysates for biological studies, PSP-immobilized ligands might prove equally useful for applications in radiochemistry, materials science, and environmental science., (© 2024. The Author(s), under exclusive licence to Society for Biological Inorganic Chemistry (SBIC).)

Gastric cancer prognosis is still notably poor despite efforts made to improve diagnosis and treatment of the disease. Chemotherapy based on platinum agents is generally used, regardless of the fact that drug toxicity leads to limited clinical efficacy. In order to overcome these problems, our group has been working on the synthesis and study of trans platinum (II) complexes. Here, we explore the potential use of two phosphine-based agents with the general formula trans -[Pt(amine)Cl 2 (PPh 3 )], called P1 and P2 (with dimethylamine or isopropylamine, respectively). A cytotoxicity analysis showed that P1 and especially P2 decrease cell viability. Specifically, P2 exhibits higher activity than cisplatin in gastric cancer cells while its toxicity in healthy cells is slightly lower. Both complexes generate Reactive Oxygen Species, produce DNA damage and mitochondrial membrane depolarization, and finally lead to induced apoptosis. Thus, an intrinsic apoptotic pathway emerges as the main type of cell death through the activation of BAX/BAK and BIM and the degradation of MCL1. Additionally, we demonstrate here that P2 produces endoplasmic reticulum stress and activates the Unfolded Protein Response, which also relates to the impairment observed in autophagy markers such as p62 and LC3. Although further studies in other biological models are needed, these results report the biomolecular mechanism of action of these Pt(II)-phosphine prototypes, thus highlighting their potential as novel and effective therapies.

Using a multigram-scalable synthesis, we obtained nine dinuclear complexes based on nonendogenous iron(I) centers and featuring variable aminocarbyne and P-ligands. One compound from the series ( FEACYP ) emerged for its strong cytotoxicity in vitro against four human cancer cell lines, surpassing the activity of cisplatin by 3-6 times in three cell lines, with an average selectivity index of 6.2 compared to noncancerous HEK293 cells. FEACYP demonstrated outstanding water solubility (15 g/L) and stability in physiological-like solutions. It confirmed its superior antiproliferative activity when tested in 3D spheroids of human pancreatic cancer cells and showed a capacity to inhibit thioredoxin reductase (TrxR) similar to auranofin. In vivo treatment of murine LLC carcinoma with FEACYP (8 mg kg -1 dose) led to excellent tumor growth suppression (88%) on day 15, with no signs of systemic toxicity and only limited body weight loss.

The search for new metal-based anticancer drug candidates is a fundamental task in medicinal inorganic chemistry. In this work, we assessed the potential of two new Ru(II)-phosphine-mercapto complexes as potential anticancer agents. The complexes, with the formula [Ru(bipy)(dppen)(Lx)]PF 6 [(1), HL1 = 2-mercapto-pyridine and (2), HL2 = 2-mercapto-pyrimidine, bipy = 2,2'-bipyridine, dppen = cis -1,2-bis(diphenylphosphino)-ethylene] were synthesized and characterized by nuclear magnetic resonance (NMR) [ 1 H, 31 P( 1 H), and 13 C], high resolution mass spectrometry (HR-MS), cyclic voltammetry, infrared and UV-Vis spectroscopies. Complex 2 was obtained as a mixture of two isomers, 2a and 2b, respectively. The composition of these metal complexes was confirmed by elemental analysis and liquid chromatography-mass spectrometry (LC-MS). To obtain insights into their lipophilicity, their distribution coefficients between n -octanol/PBS were determined. Both complexes showed affinity mainly for the organic phase, presenting positive log  P values. Also, their stability was confirmed over 48 h in different media ( i.e. , DMSO, PBS and cell culture medium) via HPLC, UV-Vis and 31 P{ 1 H} NMR spectroscopies. Since enzymes from the P-450 system play a crucial role in cellular detoxification and metabolism, the microsomal stability of 1, which was found to be the most interesting compound of this study, was investigated using human microsomes to verify its potential oxidation in the liver. The analyses by LC-MS and ESI-MS reveal three main metabolites, obtained by oxidation in the dppen and bipy moieties. Moreover, 1 was able to interact with human serum albumin (HSA). The cytotoxicity of the metal complexes was tested in different cancerous and non-cancerous cell lines. Complex 1 was found to be more selective than cisplatin against MDA-MB-231 breast cancer cells when compared to MCF-10A non-cancerous cells. In addition, complex 1 affects cell morphology and migration, and inhibits colony formation in MDA-MB-231 cells, making it a promising cytotoxic agent against breast cancer.

The environmental benefits of utilizing protease as a biocatalyst for wool shrink-resist finishing have been widely recognized. However, the efficacy of individual protease treatment is unsatisfactory due to its incapability towards the outermost cuticle layer of wool fibers that contains hydrophobic fatty acids. In order to weaken the structural integrity of the highly cross-linked scales and promote the enzymatic anti-felting, sodium sulfite and tris (2-carboxyethyl) phosphine hydrochloride (TCEP) were employed in combination with papain, respectively, aiming at obtaining a low shrinkage without unacceptable fiber damages. Based on the synergistic effect of papain and TCEP, the edges of wool scales were slightly destroyed by the reduction of disulfide bonds, accompanied by enzymatic hydrolysis of the keratin component. Through the controlled reduction and hydrolysis of wool scales, satisfactory anti-felting result was achieved without causing severe damage to the fiber interiors. In the presence of 0.25 g/L TCEP and 25 U/mL papain, the area shrinkage of wool fabric decreased to approximately 6 %, with a low strength loss of less than 8 %. Meanwhile, the dyeing behavior of the wool fabric under low-temperature conditions was dramatically improved, leading to decreased energy consumption during production. The present work provides an alternative for eco-friendly finishing of wool fabrics, which can be applied commercially., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Glutathione has long been considered a key biomarker for determining the antioxidant response of the cell. Hence, it is a primary marker for reactive oxygen species studies. The method utilizes Ortho-phthalaldehyde (OPA) to quantify the cellular concentration of glutathione(s). OPA conjugates with reduced glutathione (GSH) via sulfhydryl binding to subsequently form an isoindole, resulting in a highly fluorescent conjugate. To attain an accurate result of both oxidized glutathione (GSSG) and GSH, a combination of masking agents and reducing agents, which have been implemented in this protocol, are required. Treatments may also impact cellular viability. Hence, normalization via protein assay is presented in this multiparametric assay. The assay demonstrates a pseudo-linear detection range of 0.234 - 30µM (R 2 =0.9932±0.007 (N=12)) specific to GSH. The proposed assay also allows for the determination of oxidized glutathione with the addition of the masking agent N-ethylmaleimide to bind reduced glutathione, and the reducing agent tris(2-carboxyethyl) phosphine is introduced to cleave the disulfide bond in GSSG to produce two molecules of GSH. The assay is used in combination with a validated bicinchoninic acid assay for protein quantification and an adenylate kinase assay for cytotoxicity assessment.

The application of 3D printing technology in the delivery of macromolecules, such as proteins and enzymes, is limited by the lack of suitable inks. In this study, we report the development of novel inks for 3D printing of constructs containing proteins while maintaining the activity of the proteins during and after printing. Different ink formulations containing Pluronic F-127 (20-35 %, w/v), trehalose (2-10 %, w/v) or mannitol, poly (ethylene glycol) diacrylate (PEGDA) (0 or 10 %, w/w), and diphenyl(2,4,6-trimethylbenzoyl) phosphine oxide (TPO, 0 or 0.2 mg/mL) were prepared for 3D-microextrusion printing. The F2 formulation that contained β-galactosidase (β-gal) as a model enzyme, Pluronic F-127 (30 %), and trehalose (10 %) demonstrated the desired viscosity, printability, and dose flexibility. The shear-thinning property of the F2 formulation enabled the printing of β-gal containing constructs with a good peak force during extrusion. After 3D printing, the enzymatic activity of the β-gal in the constructs was maintained for an extended period, depending on the construct design and storage conditions. For instance, there was a 50 % reduction in β-gal activity in the two-layer constructs, but only a 20 % reduction in the four-layer construct (i.e., 54.5 ± 1.2 % and 82.7 ± 9.9 %, respectively), after 4 days of storage. The β-gal activity in constructs printed from the F2 formulation was maintained for up to 20 days when stored in sealed bags at room temperatures (21 ± 2 °C), but not when stored unsealed in the same conditions (e.g., ∼60 % activity loss within 7 days). The β-gal from constructs printed from F2 started to release within 5 min and reached 100 % after 20 min. With the design flexibility offered by the 3D printing, the β-gal release from the constructs was delayed to 3 h by printing a backing layer of β-gal-free F5 ink on the constructs printed from the F2 ink. Finally, ovalbumin as an alternative protein was also incorporated in similar ink compositions. Ovalbumin exhibited a release profile like that of the β-gal, and the release can also be modified with different shape design and/or ink composition. In conclusion, ink formulations that possess desirable properties for 3D printing of protein-containing constructs while maintaining the protein activity during and after printing were developed., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: [Author M.M. is co-inventor of related intellectual property (IP) on 3D printing of biologics. M.M., an author of this manuscript, holds stock in, serves on a scientific advisory board for, or is a consultant for, CoM3D Ltd. (Surrey, UK), DosePlus Therapeutics (Princeton, NJ, USA), and Septum Solutions LLC (Houston, TX, USA). The terms of this arrangement have been reviewed and approved by the University of Texas at Austin and the University of Mississippi in accordance with their policies on objectivity in research. The company had no role in the design of the study; in the collection, analyses, or interpretation of data; in the writing of the manuscript, and in the decision to publish the results. ZC reports a relationship with CoM3D Ltd. ZC serves as the Editor of the International Journal of Pharmaceutics for North America. This paper was subject to all the Journal’s usual procedures. The peer review was handled, and the editorial decision was made independently of ZC and his research group.]., (Copyright © 2024 Elsevier B.V. All rights reserved.)

3,4-disubstituted maleimides find wide applications in various pharmacologically active compounds. This study presents a highly effective approach for synthesizing derivatives of 3,4-disubstituted maleimides through the direct isomerization of α-succinimide-substituted allenoates, followed by a cascade γ'-addition and aryl imines using PR 3 as a catalyst. The resulting series of 3,4-disubstituted maleimides exhibited excellent stereoselectivities, achieving yields of up to 86%. To our knowledge, the phosphine-mediated γ'-addition reaction of allenoates is seldom reported.

Breast cancer is one of the most basilisk cancers for women due to its high mortality rate which can be prevented drastically with early-stage detection. In this work, the adsorption mechanism of two volatile organic compounds that are present in the breath of breast cancer patients, 2-Methyloctane and 3, 3-Dimethylpentane, has been investigated on aluminum phosphide nanotubes (AlPNT) and gallium phosphide nanotubes (GaPNT) in order to understand their feasibility as sensor materials to diagnosis breast cancer at early stage. We have used the quantum mechanical approach by employing density functional theory using B3LYP-D3 hybrid potential for noncovalent interaction along with the LanL2DZ basis in the Gaussian 09 software package. The adsorption properties analyses suggest that GaPNT exhibits better sensing behavior as well as proclaims 12.6% greater adsorption energy for 2-Methyloctane and 9.4% greater adsorption energy for 3, 3-Dimethylpentane than AlPNT. Other structural and electric properties analyses satisfy this conclusion and suggest that GaPNT exhibits higher stability than AlPNT and could possibly be a potential candidate for developing biosensors to detect breast cancer at the preliminary stages., (© 2024 IOP Publishing Ltd.)

A general method for chemo- and diastereoselective modification of anticancer natural product arglabin with nitrogen- and carbon-centered pronucleophiles under the influence of nucleophilic phosphine catalysts was developed. The locked s-cis-geometry of α-methylene-γ-butyrolactone moiety of arglabin favors for the additional stabilization of the zwitterionic intermediate by electrostatic interaction between phosphonium and enolate oxygen centers, leading to the unprecedentedly high efficiency of the phosphine-catalyzed Michael additions to this sesquiterpene lactone. Using n-Bu 3 P as the catalyst, pyrazole, phthalimide, 2-oxazolidinone, 4-quinazolinone, uracil, thymine, cytosine, and adenine adducts of arglabin were obtained. The n-Bu 3 P-catalyzed reaction of arglabin with active methylene compounds resulted in the predominant formation of bisadducts bearing a new quaternary carbon center. All synthesized Michael adducts and previously obtained phosphorylated arglabin derivatives were evaluated in vitro against eleven cancer and two normal cell lines, and the results were compared to those of natural arglabin and its dimethylamino hydrochloride salt currently used as anticancer drugs. 2-Oxazolidinone, uracil, diethyl malonate, dibenzyl phosphonate, and diethyl cyanomethylphosphonate derivatives of arglabin exhibited more potent antiproliferative activity towards several cancer cell lines and lower cytotoxicity towards normal cell lines in comparison to the reference compounds, indicating the feasibility of the developed methodology for the design of novel anticancer drugs with better therapeutic potential., (© 2024 Wiley-VCH GmbH.)

In continuation of our previous works on the cytotoxic properties of organopalladium compounds, in this contribution we describe the first systematic study of the anticancer activity of Pd(II)-aryl complexes. To this end, we have prepared and thoroughly characterized a wide range of palladium derivatives bearing different diphosphine, aryl and halide ligands, developing, when necessary, specific synthetic protocols. Most of the synthesized compounds showed remarkable cytotoxicity towards ovarian and breast cancer cell lines, with IC 50 values often comparable to or lower than that of cisplatin. The most promising complexes ([PdI(Ph)(dppe)] and [PdI( p -CH 3 -Ph)(dppe)]), characterized by a diphosphine ligand with a low bite angle, exhibited, in addition to excellent cytotoxicity towards cancer cells, low activity on normal cells (MRC5 human lung fibroblasts). Specific immunofluorescence tests (cytochrome c and H2AX assays), performed to clarify the possible mechanism of action of this class of organopalladium derivatives, seemed to indicate DNA as the primary cellular target, whereas caspase 3/7 assays proved that the complex [PdI(Ph)(dppe)] was able to promote intrinsic apoptotic cell death. A detailed molecular docking analysis confirmed the importance of a diphosphine ligand with a reduced bite angle to ensure a strong DNA-complex interaction. Finally, one of the most promising complexes was tested towards patient-derived organoids, showing promising ex vivo cytotoxicity.

In this work, we investigated the anticancer activity of several novel silver(I) 2,2'-bipyridine complexes containing either triphenylphosphane (PPh 3 ) or 1,2-bis(diphenylphosphino)ethane (dppe) ligands. All compounds were characterized by diverse analytical methods including ESI-MS spectrometry; NMR, UV-vis, and FTIR spectroscopies; and elemental analysis. Moreover, several compounds were also studied by X-ray single-crystal diffraction. Subsequently, the compounds were investigated for their anticancer activity against drug-resistant and -sensitive cancer cells. Noteworthily, neither carboplatin and oxaliplatin resistance nor p53 deletion impacted on their anticancer efficacy. MES - OV cells displayed exceptional hypersensitivity to the dppe-containing drugs. This effect was not based on thioredoxin reductase inhibition, enhanced drug uptake, or apoptosis induction. In contrast, dppe silver drugs induced paraptosis, a novel recently described form of programmed cell death. Together with the good tumor specificity of this compound's class, this work suggests that dppe-containing silver complexes could be interesting drug candidates for the treatment of resistant ovarian cancer.

Organophosphorus compounds have long been considered valuable in both organic synthesis and life science. P(III)-nucleophiles, such as phosphites, phosphonites, and diaryl/alkyl phosphines, are particularly noteworthy as phosphorylation reagents for their ability to form new P-C bonds, producing more stable, ecofriendly, and cost-effective organophosphorus compounds. These nucleophiles follow similar phosphorylation routes as in the functionalization of P-H bonds and P-OH bonds. Activation can occur through photocatalytic, electrocatalytic, or thermo-driven reactions, often in coordination with a Michaelis-Arbuzov-trpe rearrangement process, to produce the desired products. As such, this review offers a thorough overview of the phosphorylated transformation and potential mechanisms of P(III)-nucleophiles, specifically focusing on developments since 2010. Notably, this review may provide researchers with valuable insights into designing and synthesizing functionalized organophosphorus compounds from P(III)-nucleophiles, guiding future advancements in both research and practical applications., (© 2024. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

The reaction of ( ortho- acetalaryl)arylmethanols with various phosphines PR 1 R 2 R 3 (R 1 = R 2 = R 3 = Ph; R 1 = R 2 = Ph, R 3 = Me and R 1 = R 2 = Me, R 3 = Ph) under acidic conditions (e.g., HCl, HBF 4 , TsOH) unexpectedly led to the formation of (10-hydroxy-9,10-dihydroanthr-9-yl)phosphonium salts instead of the corresponding anthryl phosphonium salts. The cyclization occurred according to the Friedel-Crafts mechanism but without the usually observed Bradsher dehydration, giving cyclic products in the form of cis/trans isomers and their conformers. In case of electron-rich and less-hindered dimethylphenylphosphine, all four stereoisomers were recorded in 31 P{ 1 H} NMR spectra, while for the other phosphines, only the two most stable cis / trans stereoisomers were detected. This study was supported by DFT and NCI calculations in combination with FT-IR analysis.

The new chalcogenylation of phosphines using n Bu 4 N‧XCN (X = S, Se) is described. The reaction in 1,2-dichloroethane at 120 °C provided the corresponding phosphine sulfides in good to high yields. The protocol could be extended to the synthesis of phosphinic acid derivatives as well as sulfurization of poly(styrene-co-4-styryldiphenylphosphine).

NP bonds were built straightforwardly between N 2 -derived molybdenum terminal nitride and phosphines. Subsequent PCET, oxidative decarbonylation and then reduction regenerated the N 2 complex, developing a synthetic cycle transferring N 2 into various iminophosphoranes. Both aryl and alkyl substituted phosphines proceeded smoothly.

The reactions of elemental sulfur (S 8 ) and polysulfides with nucleophiles are relevant to organic synthesis, materials science and biochemistry, but the mechanisms by which they operate are still unknown due to the inherent thermodynamic and kinetic instability of polysulfide intermediates. Using Density Functional Theory (DFT) calculations at the ωB97X-D/aug-cc-pV(T+d)Z/SMD(MeCN) // ωB97X-D/aug-cc-pVDZ/SMD(MeCN) level of theory, we studied the mechanisms behind the reaction of elemental sulfur and polysulfides with cyanide and phosphines, which quantitatively generate the monosulfide products thiocyanate and phosphine sulfides, respectively. All plausible pathways including nucleophilic decomposition, unimolecular decomposition, scrambling reactions, and attack on thiosulfoxides, have been considered to provide the first comprehensive mechanistic picture for this class of reactions. Overall, intramolecular cyclization is identified as the most favorable decomposition pathway for long polysulfides. For short polysulfides, a mixture of unimolecular decomposition, nucleophilic attack, and scrambling pathways can be expected., (© 2023 Wiley-VCH GmbH.)

A systematic study of the effect of phosphine and bis-phosphine ligands in the interaction of Ni II , Pd II , and Pt II complexes with two classes of zinc fingers was performed. The Cys 2 His 2 , finger 3 of specific protein-1, and the Cys 2 HisCys C-terminal zinc finger of nucleocapsid protein 7 of the HIV-1 were used as models of the respective class. In general, phosphine ligands favor the metal binding to the peptide, although the bis-phosphine ligands produce more specific binding than the monodentate. In the case of nickel complexes, the interaction of Ni II ions with the sequence SKH, present in Cys 2 His 2 , results in hydrolysis, contrasting to the preferred zinc ejection produced by the Ni II complexes with chelating phosphines, producing Ni(bis-phosphine) fingers. In the absence of the SKH sequence, zinc ejection is observed with the formation of nickel fingers, with reactivity dependent on the phosphine. On the other hand, Pd(phosphines) produces Pd 2 fingers in the case of triphenylphosphine with the phosphine coordinated as intermediate species. The bis-phosphine ligands produce very clean spectra and a stable signal Pd(bis-phosphine)finger. Interestingly, phosphines produce very reactive platinum complexes, which eject zinc and promote peptide hydrolysis. The results reported here are relevant to the understanding of the mechanism of these interactions and how to modulate metallocompounds for zinc finger interference., Competing Interests: Declaration of Competing Interest The authors declare no conflicts of interest., (Copyright © 2022 Elsevier Inc. All rights reserved.)

Addition of the P-H bond in bis(mesitoyl)phosphine, HP(COMes) 2 (BAPH), to a wide variety of activated carbon-carbon double bonds as acceptors was investigated. While this phospha-Michael addition does not proceed in the absence of an additive or catalyst, excellent results were obtained with stoichiometric basic potassium or caesium salts. Simple amine bases can be employed in catalytic amounts, and tetramethylguanidine (TMG) in particular is an outstanding catalyst that allows the preparation of bis(acyl)phosphines, R-P(COMes) 2 , under very mild conditions in excellent yields after only a short time. All phosphines RP(COMes) 2 can subsequently be oxidized to the corresponding bis(acyl)phosphane oxides, RPO(COMes) 2 , a substance class belonging to the most potent photoinitiators for radical polymerizations known to date. Thus, a simple and highly atom economic method has been found that allows the preparation of a broad range of photoinitiators adapted to their specific field of application even on a large scale., (© 2022 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

We describe the synthesis and characterization of two classes of hybrid phosphino ligands functionalized with amino ester or amino acid groups. These compounds are built either on a rigid planar phenyl platform or on a functionalized - conformationally controlled - rotational ferrocene backbone. Modifications at the -PR 2 phosphino groups (R=aryl and alkyl, with various steric bulk, Ph, Mes, i-Pr, Cy) and at the amino acid/amino ester functions are reported, showing a valuable high modularity. The coordination chemistry of these compounds regarding palladium and gold was investigated, in particular with respect to the coordination mode of the phosphino groups and the preferred interaction with metals for the amino ester and amino acid functions. For all the hybrid ligands, based either on ferrocenyl or phenyl platforms, the (P,N)-chelating effect dominates in solution for coordination to Pd(II), while linear P-Au(I) complexes without interaction with the amino groups are assumed. The investigation of the catalytic activity of these new ligands in the demanding palladium-catalyzed Suzuki-Miyaura coupling of o-dibromoarenes with fluorophenylboronic acid underlined the importance of the amino ester dicyclohexylphosphinoferrocene for avoiding the deleterious homocoupling and arene oligomerization side-reactions that were otherwise observed with the other phosphine ligands., (© 2023 The Authors. Published by Wiley-VCH GmbH.)

This Account presents an overview of a promising collection of phosphine ligands simply made from the modular Fischer indolization process and their applications in modern arylation processes. Using one easily accessible 2-arylindole scaffold, three major phosphino-moiety-positioned ligand series can be readily generated. We have attempted to explore challenging electrophilic and nucleophilic partners for the coupling reaction using the modular ligand tool. For the electrophilic partner study, CM-phos -type ligands, where the phosphino group is located at the 2-arene position of 2-arylindole, allow the successful cross-coupling of aryl mesylates. The CM-phos ligand forms a palladacycle before entering the cross-coupling catalytic cycle. For the nucleophilic partner investigation, the indole C3-positioned phosphines show the first accomplishment of Pd-catalyzed organotitanium nucleophile arylation. Indeed, the aryl-titanium nucleophile undergoes cross-coupling more efficiently than does the organoboron coupling partner in particular cases. Moreover, in the indole C3-positioned phosphine series, the -PPh 2 -containing ligands perform better in the highly sterically hindered cross-coupling of aryl chlorides than do ligands containing the -PCy 2 moiety. The catalyst loading can even be reduced to 0.2 mol % Pd for tetra- ortho -substituted biaryl synthesis. This finding offers a new perspective on the next-generation design of phosphine ligands in which the sterically bulky and electron-rich -PR 2 group (R = alkyl) may not be necessary for the cross-coupling of aryl chlorides. In general, we hypothesize that a good balance of steric and electronic properties for entertaining the oxidative addition and reductive elimination steps is crucial to the success of the reaction. For the steric factor, the highly sterically congested -PR 2 group normally favors the reductive elimination, yet we conjecture that this sterically bulky group would serve as an obstacle for the incoming aryl halides. For the electronic factor, the electron rich -PR 2 group is believed to support the oxidative cleavage of the C(Ar)-Cl bond by donating more electron density to the corresponding σ* orbital. Nevertheless, the high electron richness of the -PR 2 group may disfavor the reductive elimination electronically. Overall, an appropriate balance of both electron density and steric bulkiness is suggested to allow the sterically hindered cross-coupling to proceed smoothly. We have found that the -PPh 2 -containing ligand is a good starting point for this investigation. The formation of aromatic carbon-carbon (C-C) and carbon-heteroatom (C-X) bonds from aryl chlorides was successfully realized using our proprietary phosphines.In addition to the indole-core-bearing ligand skeleton, we also explored the relevant imidazolyl and carbazolyl phosphines for their unique applications. Interestingly, the carbazolyl ligand, having more flexible C-N axial chirality, displays particular interchangeable Pd-N and Pd-arene coordination, which facilitates both oxidative addition and reductive elimination processes. Moreover, this C-N axially chiral ligand allows the successful asymmetric Suzuki-Miyaura coupling for attaining the most sterically hindered tetra- ortho -substituted biaryls with excellent enantioselectivity. The rationale behind these scientifically interesting findings is presented in detail.

By applying the potassium salts of cyclopentadienyl-phosphine ligands LK to CoCl 2 , the corresponding cobalt chlorides (1, LCo II Cl) were prepared. By reducing complexes 1 with KHBEt 3 under a N 2 atmosphere, bridging end-on complexes, LCo I -N 2 -Co I L (2 a and 2 b), were successfully obtained. 15 N 2 -labeled [ 15 N 2 ]-2 a was prepared under 15 N 2 / 14 N 2 exchange in THF solution. LCo I -N 2 -Co I L complex 2 a could react with P 4 molecules to release N 2 and generate a Co-P 4 -Co moiety 4. Further reduction of complex 2 b led to cleavage of a P-C bond in the cyclopentadienyl-phosphine ligand to provide novel μ-PCy 2 -bridged Co 0 -N 2 complex 5. DFT calculations confirmed the experimental observations., (© 2022 Wiley-VCH GmbH.)

New mono- and di-nuclear thio-purine and thio-purine nucleoside gold(I) complexes were synthesized, characterized, and evaluated in vitro for biological activities in comparison to related known purine complexes. By combining known anti-tumoral thio-purines with R 3 PAu moieties as present in auranofin, complexes with enhanced effects and selectivities were obtained, which not only act as cytostatics, but also disrupt tumor-specific processes. Their IC 50 values in cytotoxicity test with tumor cell lines ranged from three-digit nanomolar to single-digit micromolar, revealing a tentative structure-activity relationship (SAR). Both the residues R 2 of the phosphane ligand and R 1 at C2 of the pyrimidine ring had a significant impact on the cytotoxicity. In most cases, the introduction of a ribo-furanosyl group at N9 of the purine led to a distinctly more cytotoxic complex. Most complexes were more active against multi-drug-resistant tumor cells or such lacking functional p53 when compared to the respective untreated wild type cell lines. Some nucleoside complexes displayed an interesting dose-dependent dual mode of action regarding cell cycle arrest and DNA repair mechanism. Some phosphane(purine-6-thiolato)gold (I) complexes had a stronger inhibitory effect on the thioredoxin reductase (TrxR) and on the reactive oxygen species (ROS) generation in cancer cells than is typical of other gold complexes. They also led to DNA fragmentation and showed anti-angiogenic effects. Their stability under test conditions was demonstrated by 77 Se NMR monitoring of an exemplary selenopurine complex., (© 2022. The Author(s).)

The dialkyl- ortho -biaryl class of phosphines, commonly known as Buchwald-type ligands, are among the most important phosphines in Pd-catalyzed cross-coupling. These ligands have also been successfully applied to several synthetically valuable Ni-catalyzed cross-coupling methodologies and, as demonstrated in this work, are top performing ligands in Ni-catalyzed Suzuki Miyaura Coupling (SMC) and C-N coupling reactions, even outperforming commonly employed bisphosphines like dppf in many circumstances. However, little is known about their structure-reactivity relationships (SRRs) with Ni, and limited examples of well-defined, catalytically relevant Ni complexes with Buchwald-type ligands exist. In this work, we report the analysis of Buchwald-type phosphine SRRs in four representative Ni-catalyzed cross-coupling reactions. Our study was guided by data-driven classification analysis, which together with mechanistic organometallic studies of structurally characterized Ni(0), Ni(I), and Ni(II) complexes allowed us to rationalize reactivity patterns in catalysis. Overall, we expect that this study will serve as a platform for further exploration of this ligand class in organonickel chemistry as well as in the development of new Ni-catalyzed cross-coupling methodologies.

Twelve tri( N -carbazolyl)phosphine gold(I) complexes, bearing both protonated and deuterated aryl phosphorous triamide-type ligands, have been synthesized and characterized. An elusive Au-H(D) interaction between the H(D) atoms of the tri( N -carbazolyl)phosphine ligand at the H-1(D-1) position of the carbazolyl ring and the central gold atom was observed. Complexes 5(H) / 5(D) bearing the dibrominated tri( N -carbazolyl)phosphine ligand exhibit isotopic polymorphism, in which two dramatically different crystal-packing modes between the protonated and deuterated forms occur. The catalytic potential of these complexes has been showcased in the gold(I)-catalyzed glycosylation with glycosyl o -alkynylbenzoates as donors, with TON being up to 27 000.

In order to develop an attractive generation of bulky oxadithiolate-bridged [FeFe]‑hydrogenase mimics with chelating diphosphines, two new series of asymmetrically diphosphine-substituted diiron model complexes [Fe 2 (μ-R 2 odt)(CO) 4 (κ 2 -diphosphine)] (3-5) with bulky Ph 2 odt bridge and their reference counterparts (6-8) with common odt bridge were obtained from the Me 3 NO-assisted substitutions of diiron hexacarbonyl precursors [Fe 2 (μ-R 2 odt)(CO) 6 ] (R 2 odt = (SCHR) 2 O, R = Ph (1) and H (2)) with different diphosphines such as (Ph 2 P) 2 NBn (labelled PN Bn P, Bn = benzyl), (Ph 2 PCH 2 ) 2 NBn (PCN Bn CP), and (Ph 2 PCH 2 ) 2 CH 2 (DPPP)), respectively. All the as-prepared complexes have been characterized by elemental analysis, IR plus NMR spectroscopies, and particularly by X-ray crystallography for 3-8. It is interesting to note that complexes 3 and 6 chelating by small bite-angle PN Bn P diphosphine have the favorable dibasal isomer whereas analogues 4, 5 and 7, 8 chelating by flexible backbone PCN Bn CP or DPPP ligands possess the main apical-basal isomer in solution or in the solid state. Further, the electrochemical properties of two pairs of representative complexes 3, 6 and 5, 8 are explored and compared by cyclic voltammetry (CV) in the absence and presence of trifluoroacetic acid (CF 3 CO 2 H) as proton source, indicating that the complete protonations of 3, 6 and 5, 8 with higher concentration of CF 3 CO 2 H lead to two new catalytic waves for the electrocatalytic proton reduction to hydrogen (H 2 )., (Copyright © 2022 Elsevier Inc. All rights reserved.)

The fine-tuning of metal-phosphine-catalyzed reactions relies largely on accessing ever more precisely tuned phosphine ligands by de-novo synthesis. Late-stage C-H functionalization and diversification of commercial phosphines offers rapid access to entire libraries of derivatives based on privileged scaffolds. But existing routes, relying on phosphorus-directed transformations, only yield functionalization of C sp 2 -H bonds in a specific position relative to phosphorus. In contrast to phosphorus-directed strategies, herein we disclose an orthogonal functionalization strategy capable of introducing a range of substituents into previously inaccessible positions on arylphosphines. The strongly coordinating phosphine group acts solely as a bystander in the sterically controlled borylation of bulky phosphines, and the resulting borylated phosphines serve as the supporting ligands for palladium during diversification through phosphine self-assisted Suzuki-Miyaura reactions., (© 2022 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

Reactions of isocyanates/isothiocyanates with primary and secondary phosphines without solvent at room temperature afforded phosphinecarboxamide/phosphinecarbothioamide, respectively, in excellent yields. Furthermore, palladium complex Pd(COD)Cl 2 was allowed to react with Ph 2 PC(O)NHPh ( 1a ) to afford [Pd{Ph 2 PC(O)NHPh-κ P } 2 Cl 2 ] ( 3 ). On the other hand, the reaction of Pd(COD)Cl 2 with 1 eq. of Ph 2 PC(S)NHPh ( 2a ) afforded [PdCl 2 {Ph 2 PC(S)NHPh-κ P,S }] ( 4 ). In the case of a 1:2 molar ratio, [PdCl{Ph 2 PC(S)NHPh-κ P,S }{Ph 2 PC(S)NHPh-κ P }]Cl ( 5 ) was formed. The newly obtained compounds were fully characterized using multielement NMR measurements and elemental analyses. In addition, the molecular structures of Ph 2 PC(O)NH(CH 2 ) 2 Cl ( 1j ), Ph 2 PC(S)NHPh(4-Cl) ( 2c ), and 3 - 5 were determined using single-crystal X-ray diffraction.

Advancements in main-group catalysis are contingent on our ability to quantify effects that enhance reactivity in these systems. Herein we report the rates of alkylation for several substituted phosphines. We report that by incorporating a single pinacol boronic ester group in the ortho -position on triphenylphosphine, the rate of substitution with benzyl bromide is approximately 4.7 times faster than the parent compound as measured by initial rates. The corresponding meta - and para -isomers are only 1.3 and 1.5 times as fast, respectively. Using X-ray crystallographic data and quantum chemical calculations, we propose this rate acceleration occurs from an O to P electrostatic interaction that stabilizes the transition state.

A Knoevenagel based redox-reaction promoted by intramolecular phosphine sources is presented for the first time. The influence of different diketones, aldehydes, bases and acids was investigated. The effects of different substituents were evaluated based on their electronical influence on the diketone structure. With the obtained results a mechanism is proposed, giving information about transition states formed during the reaction, which can lead to different products. This type of an internal redox transformation with a phosphine oxide moiety remaining in the molecule after the redox reaction represents a new type of reaction.

The reactivity of palladium(II) indenyl derivatives and their applications are topics relatively less studied, though in recent times these compounds have been used as pre-catalysts able to promote challenging cross-coupling processes. Herein, we propose the first systematic study concerning the nucleophilic attack on the palladium(II) coordinated indenyl fragment and, for this purpose, we have prepared a library of new Pd-indenyl complexes bearing mono- or bidentate phosphines as spectator ligands, developing specific synthetic strategies. All novel compounds are thoroughly characterized, highlighting that the indenyl ligand presents always a hapticity intermediate between η 3 and η 5 . Secondary amines have been chosen as nucleophiles for the present study and indenyl amination has been monitored by UV-Vis and NMR spectroscopies, deriving a second order rate law, with dependence on both complex and amine concentrations. The rate-determining step of the process is the initial attack of the amine to the coordinated indenyl fragment, and this conclusion has been supported also by DFT calculations. The determination of second order rate constants has allowed us to assess the impact of the phosphine ligands on the kinetics of the process and identify the steric and electronic descriptors most suitable for predicting the reactivity of these systems. Finally, in vitro tests have proven that these organometallic compounds promote antiproliferative activity towards ovarian cancer cells better than cisplatin and possibly by adopting a different mechanism of action.

The arylthiol 4-mercaptophenylacetic acid (MPAA) is a powerful catalyst of selenosulfide bond reduction by the triarylphosphine 3,3',3″-phosphanetriyltris(benzenesulfonic acid) trisodium salt (TPPTS). Both reagents are water-soluble at neutral pH and are particularly adapted for working with unprotected peptidic substrates. Contrary to trialkylphosphines such as tris(2-carboxyethyl)phosphine hydrochloride (TCEP), TPPTS has the advantage of not inducing deselenization reactions. We believe that the work reported here will be of value for those manipulating selenosulfide bonds in peptidic or protein molecules.

Trialkyl and triaryl phosphines are important classes of ligands in the field of catalysis and materials research. The wide usability of these low-valent phosphines has led to the design and development of new synthesis routes for a variety of phosphines. In the present work, we report the synthesis and characterization of some mixed arylalkyl tertiary phosphines via the Grignard approach. A new asymmetric phosphine is characterized extensively by multi-spectroscopic techniques. IR and UV-Vis spectra of some selected compounds are also compared and discussed. Density functional theory (DFT)-calculated results support the formation of the new compounds.

A novel synthesis of diphenyl(2-thienyl)phosphine, along with its' oxide, sulfide and selenide derivatives, is reported here. These phosphines have been characterized by NMR, IR, MS and X-Ray crystallography. The phosphine oxide derivative was reacted with a selection of lanthanide(III) nitrates and triflates, LnX 3 , to give the resultant metal-ligand complexes. These complexes have also been characterized by NMR, IR, MS and X-Ray crystallography. Single crystal X-Ray diffraction data shows a difference in metal-ligand complex stoichiometry and stereochemistry depending on the counteranion (nitrate vs. triflate). The [Ln(Ar 3 PO) 3 (NO 3 ) 3 ] ligand-nitrate complexes are nine-coordinate to the metal in the solid state (bidentate nitrate), featuring a 1 : 3 lanthanide-ligand ratio and bear an overall octahedral arrangement of the six, coordinated ligands. Our [Ln(Ar 3 PO) 3 (NO 3 ) 3 ] ligand-nitrate complexes gave three examples of fac -stereochemistry, where mer -stereochemistry is almost universally observed in the literature of highly related [Ln(Ar 3 PO) 3 (NO 3 ) 3 ] complexes. For the Tb complexes, two different arrangements of the ligands around the metal were observed in the solid state for [Tb(Ar 3 PO) 3 (NO 3 ) 3 ] and [Tb(Ar 3 PO) 4 (OTf) 2 ] [OTf]. [Tb(Ar 3 PO) 3 (NO 3 ) 3 ] is strictly nine-coordinate, ligand mer -stereochemistry in the solid state, and [Tb(Ar 3 PO) 4 (OTf) 2 ] [OTf] is strictly octahedral, six-coordinate, with a square-planar stereochemical arrangement of the phosphine oxide ligands around the metal.

A highly diastereo- and enantioselective phosphine-catalyzed sequential [3 + 2]/[3 + 2] annulation of allenoates with arylidenemalononitriles has been developed. This reaction allows for the facile construction of multifunctionalized cis -fused bicyclic[3,3,0]octene scaffolds, encompassing three consecutive stereogenic centers with one quaternary carbon center, in a one-step operation from readily available materials. The reported protocol is scalable, operates under mild reaction conditions, and creates the core structural motif of a number of natural products.

N-Triphos derivatives (NP 3 R , R = alkyl, aryl) and asymmetric variants (NP 2 R X R' , R' = alkyl, aryl, X = OH, NR 2 , NRR') are an underexplored class of tuneable, tripodal ligands in relation to the coordination chemistry of Re and Tc for biomedical applications. Mixed-ligand approaches are a flexible synthetic route to obtain Tc complexes of differing core structures and physicochemical properties. Reaction of the NP 3 Ph ligand with the Re(V) oxo precursor [ReOCl 3 (PPh 3 ) 2 ] generated the bidentate complex [ReOCl 3 (κ 2 -NP 2 Ph OH Ar )], which possesses an unusual AA'BB'XX' spin system with a characteristic second-order NMR lineshape that is sensitive to the bi- or tridentate nature of the coordinating diphosphine unit. The use of the asymmetric NP 2 Ph OH Ar ligand resulted in the formation of both bidentate and tridentate products depending on the presence of base. The tridentate Re(V) complex [ReOCl 2 (κ 3 -NP 2 Ph O Ar )] has provided the basis of a new reactive "metal-fragment" for further functionalization in [3 + 2] mixed-ligand complexes. The synthesis of [3 + 2] complexes with catechol-based π-donors could also be achieved under one-pot, single-step conditions from Re(V) oxo precursors. Analogous complexes can also be synthesized from suitable 99 Tc(V) precursors, and these complexes have been shown to exhibit highly similar structural properties through spectroscopic and chromatographic analysis. However, a tendency for the {M V O} 3+ core to undergo hydrolysis to the {M V O 2 } + core has been observed both in the case of M = Re and markedly for M = 99 Tc complexes. It is likely that controlling this pathway will be critical to the generation of further stable Tc(V) derivatives.

A nucleophilic aromatic substitution (S N Ar) reaction that allowed transition-metal-free C-P bond construction via C-N bond cleavage was developed. The coupling between aryltrimethylammonium salts and secondary phosphines from the in situ reduction of diarylphosphine oxides led to the formation of diverse triarylphosphines with various functional groups. This one-pot process was not only a pertinent S N Ar precedent but also a favorable transition-metal-free alternative for C-P coupling.

Background: Aluminum phosphide (rice tablet) is a highly efficient agent for preserving grains against rodents and insects. It accounts for a large number of poisoning cases. Aluminum phosphide poisoning has a high mortality rate of about 90%, and to date, no antidote is available. It releases phosphine gas after exposure to moisture, and this reaction is catalyzed by the acidity of the stomach. Phosphine is then absorbed throughout the respiratory or gastrointestinal tracts and causes toxicity through inhibition of cytochrome c oxidase and formation of highly reactive free radicals. Treatment of patients with aluminum phosphide poisoning is supportive, including mechanical ventilation and vasopressors. The usage of infusion of glucose-insulin-potassium in rice tablet poisoning has been suggested, after its positive beneficial cardiac inotropic effects in patients with beta-blocker and calcium channel blocker poisoning., Case Presentation: We report the case of a 30-year-old Iranian woman with critical aluminum phosphide poisoning, presented with hypotension and other signs of shock and severe metabolic acidosis, successfully treated with high-dose regular insulin and hypertonic dextrose and discharged from hospital in good condition. In contrast to our previous experiences, in which nearly all patients with critical aluminum phosphide poisoning died, this patient was saved with glucose-insulin-potassium., Conclusion: Aluminum phosphide poisoning has a high mortality rate, and to date, no antidote is available. Administration of high-dose intravenous regular insulin and dextrose is suggested as a potential life-saving treatment for patients with critical aluminum phosphide poisoning., (© 2022. The Author(s).)

A novel unprecedented triphenylphosphine-mediated [4 + 3] annulation reaction of 2-benzylidene indane-1,3-diones and -diynoates through initial phosphine α-addition was discovered and found to result in biologically interesting indeno[1,2- b ]oxepin-4-ylidenes in up to 75% yield. The seven-membered separable Z and E isomeric oxepins were confirmed using single-crystal X-ray diffraction.

Thiols are a functional group commonly used for selective reactions in a biochemical setting because of their high nucleophilicity. Phosphorus nucleophiles can undergo some similar reactions to thiols, but remain underexploited in this setting. In this work we show that phosphine nucleophiles react cleanly and quickly with a dehydroalanine electrophile, itself generated from cysteine, to give a stable adduct in a peptide context. NMR reveals the product to be a phosphonium ion and indicates some backbone conformational constraint, possibly arising from transient carbonyl coordination. The reaction proceeded quickly, with a pseudo-first order rate constant of 0.126 min -1 at 1 mM peptide (80% conversion in 10 min), and with no detectable side products on the peptide. A broad peptide sequence scope and water-soluble phosphines with alkyl as well as aromatic groups were all shown to react efficiently. Phosphine addition proved to be efficient on nisin as a model Dha-containing biologically-derived peptide and on an mRNA-displayed peptide, as well as on TCEP-modified agarose for peptide capture from solution. This reaction thus presents a promising approach for modification of peptides for cargo attachment or altered physical properties in peptide discovery.

The P-O bond of epimerized alkoxyl phosphine-borane was cleaved by naphthalene-lithium, to form two diastereomers of P-anions in a ratio of 86 : 14, which was then converted to secondary phosphine-borane via acidification, and to tertiary phosphines with alkyl halides with enhanced 96 : 4 dr. The isolated tertiary phosphine containing hydroxyl (in >99 : 1 dr) was converted to multi-stereogenic tertiary phosphines via O -alkylation with alkylene dihalides.