Search

We describe a new miniaturised and simplified genotoxicity testing system that saves space and can be observed using fluorescence microscopy after only 24 hours of incubation and allowing for a readout that can be automatized by image analysis.

Ovarian cancer remains a major public health issue due to its poor prognosis. To develop more effective therapies, it is crucial to set-up reliable models that closely mimic the complexity of the ovarian tumor's microenvironment. 3D bioprinting is currently a promising approach to build heterogenous and reproducible cancer models with controlled shape and architecture. However, this technology is still poorly investigated to model ovarian tumors. In this study, we describe a 3D bioprinted ovarian tumor model combining cancer cells (SKOV-3) and cancer associated fibroblasts (CAFs). The resulting tumor models showed their ability to maintain cell viability and proliferation. Cells were observed to self-assemble in heterotypic aggregates. Moreover, CAFs were observed to be recruited and to circle cancer cells reproducing an in vivo process taking place in the tumor microenvironment (TME). Interestingly, this approach also showed its ability to rapidly generate a high number of reproducible tumor models that could be subjected to usual characterizations (cell viability and metabolic activity; histology and immunological studies; and real-time imaging). Therefore, these ovarian tumor models can be an interesting tool for high throughput drug screening applications. This article is protected by copyright. All rights reserved.

An original “all-in-one” platform combining polymers, enzymes, and enzymatic substrates in a unique film is designed. A polymeric barrier stratum prevents any contact between enzymes adsorbed on top of the film and substrates loaded in an underlying reservoir. Upon stretching of the film, a continuous diffusion of substrates through the barrier is triggered, followed by a catalytic reaction. This leads to the formation of products that are released from the film. This new platform acts as a stretch-induced reactive release system and emerges as an innovative concept in mechano-responsive materials.

International audience; An overview on the design of nitric oxide (NO) delivering surfaces for biomedical purposes is provided, with a focus on the advances of the past 5 years. A localized supply of NO is of a particular interest due to the pleiotropic biological effects of this diatomic compound. Depending on the generated NO flux, the surface can mimic a physiological release profile to provide an activity on the vascular endothelium or an antibacterial activity. Three requirements are considered to describe the various strategies leading to a surface delivering NO. Firstly, the coating must be selected in accordance with the properties of the substrate (nature, shape, dimensions…). Secondly, the releasing and/or generating kinetics of NO should match the targeted biological application. Currently, the most promising structures are developed to provide an adaptable NO supply driven by pathophysiological needs. Finally, the biocompatibility and the stability of the surface must also be considered regarding the expected residence time of the device. A critical point of view is proposed to help readers in the design of the NO delivering surface according to its expected requirement and therapeutic purpose.

The increase of antimicrobial resistance to conventional antibiotics is worldwide a major health problem that requires the development of new bactericidal strategies. Antimicrobial photodynamic therapy (a-PDT) that generates reactive oxygen species acting on multiple cellular targets is unlikely to induce bacterial resistance. This localized treatment requires, for safe and efficient treatment of nonsuperficial infections, a targeting photosensitizer excited in the near IR. To this end, a new conjugate consisting of an antimicrobial peptide linked to a π-extended porphyrin photosensitizer was designed for a-PDT. Upon irradiation at 720 nm, the conjugate has shown at micromolar concentration strong bactericidal action on both Gram-positive and Gram-negative bacteria. Moreover, this conjugate allows one to reach a low minimum bactericidal concentration with near IR excitation without inducing toxicity to skin cells. Keywords: antimicrobial peptide; antimicrobial photodynamic therapy; bacteria; keratinocyte; near infrared; porphyrin.

Surface texturing is an easy way to control wettability as well as bacterial adhesion. Air trapped in the surface texture of an immersed sample was often proposed as the origin of the low adhesion of bacteria to surfaces showing superhydrophobic properties. In this work, we identified two sets of femtosecond laser processing parameters that led to extreme superhydrophobic textures on a silicone elastomer but showed opposite behavior against Staphylococcus aureus (S. aureus, ATCC 25923) over a short incubation times (6 h). The main difference from most of the previous studies was that the air trapping was not evaluated from the extrapolation of the results of the classical sessile drop technique but from the drop rebound and Wilhelmy plate method. Additionally, all wetting tests were performed with bacteria culture medium and at 37 °C in the case of the Wilhelmy plate method. Following this approach, we were able to study the formation of the liquid/silicone interface and the associated air trapping for immersed samples that is, by far, most representative of the cell culture conditions than those associated with the sessile drop technique. Finally, the conversion of these superhydrophobic coatings into superhydrophilic ones revealed that air trapping is not a necessary condition to avoid Staphylococcus aureus retention on one of these two textured surfaces at short incubation times.

The extensive innate immune response to implanted biomaterials contributes significantly to their sub-par performance and failure. Granuloma formation is one of such reactions which results in multi-cell type clusters in line with the immune reaction to implanted materials. However, currently no in vitro model of granuloma formation exists that takes into account the arrival of multiple cell types (immune cells and connective tissue cells) to the implant insertion site. In this study, we developed a two-step model based on stimulated macrophage seeding followed by fibroblast introduction after a physiologically relevant time period for mimicking initial steps of immune reaction to biomaterials and inducing granuloma like behavior. Both LPS and TNF-α induction resulted in granuloma like formations which persisted longer than the control conditions. Introduction of human fibroblasts resulted in the colonization of the surfaces where the cell numbers and the collagen secretion were dependent on the microenvironment. In order to demonstrate the capacity of our model system to monitor the reaction to a given coating, a validated antimicrobial coating (Polyarginine (PAR)/Hyaluronic acid (HA)) was used as a testing bed. The coating prevented the adhesion of macrophages while allowing the adhesion of the fibroblast at the time of their arrival. Similar to its antimicrobial activity, macrophage metabolic activity and M2 differentiation in the presence of PAR was dependent to its chain length. The incorporation of fibroblasts resulted in decreased TNF-α and increased IL-1RA secretion especially in stimulation conditions. The pro- and anti-inflammatory cytokine secretions were low for PAR/HA coatings in line with the decreased number of macrophage presence. In the presence of complex PBMC population, the coating resulted in slightly less cellular attachment, without any significant cytokine secretion; the absence of inflammatory reaction was also demonstrated in vivo in a mouse model. The described in vitro granuloma testing system can control the macrophage reaction as a function of stimulation. It can also be used for testing new biomaterials for the potential innate immune responses and also for validation of implant coatings beyond their primary function from the immune response point of view.

The difficulty involved in the treatment of many tumours due to their recurrence and resistance to chemotherapy is tightly linked to the presence of cancer stem cells (CSCs). This CSC sub-population is distinct from the majority of cancer cells of the tumour bulk. Indeed, CSCs have increased mitochondrial mass that has been linked to increased sensitivity to mitochondrial targeting compounds. Thus, a platinum-based polyethylenimine (PEI) polymer–drug conjugate (PDC) was assessed as a potential anti-CSC therapeutic since it has previously displayed mitochondrial accumulation. Our results show that CSCs have increased specific sensitivity to the PEI carrier and to the PDC. The mechanism of cell death seems to be necrotic in nature, with an absence of apoptotic markers. Cell death is accompanied by the induction of a protective autophagy. The interference in the balance of this pathway, which is highly important for CSCs, may be responsible for a partial reversion of the stem-like phenotype observed with prolonged PEI and PDC treatment. Several markers also indicate the cell death mode to be capable of inducing an anti-cancer immune response. This study thus indicates the potential therapeutic perspectives of polycations against CSCs.

Dental pulp stem cells (DPSCs) are a promising cell source for regeneration of dental pulp. Migration is a key event but influence of the microenvironment rigidity (5 kPa at the center of dental pulp to 20 GPa for the dentin) is largely unknown. Mechanical signals are transmitted from the extracellular matrix to the cytoskeleton, to the nuclei, and to the chromatin, potentially regulating gene expression. To identify the microenvironmental influence on migration, we analyzed motility on PDMS substrates with stiffness increasing from 1.5 kPa up to 2.5 MPa. We found that migration speed slightly increases as substrate stiffness decreases in correlation with decreasing focal adhesion size. Motility is relatively insensitive to substrate stiffness, even on a bi-rigidity PDMS substrate where DPSCs migrate without preferential direction. Migration is independent of both myosin II activity and YAP translocation after myosin II inhibition. Additionally, inhibition of Arp2/3 complex leads to significant speed decrease for all rigidities, suggesting contribution of the lamellipodia in the migration. Interestingly, the chromatin architecture remains stable after a 7-days exposure on the PDMS substrates for all rigidity. To design scaffold mimicking dental pulp environment, similar DPSCs migration for all rigidity, leaves field open to choose this mechanical parameter. Keywords: Arp2/3; Chromatin organization; DPSCs; Migration; Myosin II; Substrate stiffness; YAP.

International audience; The design of layer-by-layer (LbL) polyelectrolyte films including nanoparticles is a growing field of innovation in a wide range of biomedical applications. Gold nanoparticles (AuNPs) are very attractive for further biomolecule coupling to induce a pharmacological effect. Nanostructured LbL films coupled with such metallic species show properties that depend on the conditions of construction, i.e. the polymer nature and dissolution buffer. Tripartite LbL films (polycation, AuNP, and polyanion) were evaluated using two different polycationic polymers (poly(allylamine hydrochloride) (PAH), poly(ethylene imine) (PEI)) and various medium conditions (salts, i.e. phosphate, Tris or Tris-NaCl buffers, and concentration). AuNP incorporation and film stability were analysed by visible spectrophotometry, capillary zone electrophoresis, a quartz crystal microbalance, and high-performance liquid chromatography. The ideal compromise between AuNP loading and film stability was obtained using PAH prepared in Tris-NaCl buffer (0.01-0.15 M). This condition allowed the formation of a LbL film that was more stable than the film with PEI and provided an AuNP quantity that was 4.8 times greater than that of the PAH-PBS-built film. In conclusion, this work presents an analytical strategy for the characterization of nanostructured multilayer films and optimization of LbL films enriched with AuNPs to design biomedical device coatings.

Implantation of biomedical devices is followed by immune response to the implant, as well as occasionally bacterial, yeast, and/or fungal infections. In this context, new implant materials and coatings that deal with medical device-associated complications are required. Antibacterial and anti-inflammatory materials are also required for wound healing applications, especially in diabetic patients with chronic wounds. In this work, hyaluronic acid (HA) hydrogels with triple activity: antimicrobial, immunomodulatory, and miRNA delivery agent, are presented. It is demonstrated that polyarginine with a degree of polymerization of 30 (PAR30), which is previously shown to have a prolonged antibacterial activity, decreases inflammatory response of lipopolysaccharide-stimulated macrophages. In addition, PAR30 accelerates fibroblast migration in macrophage/fibroblast coculture system, suggesting a positive effect on wound healing. Furthermore, PAR30 allows to load miRNA into HA hydrogels, and then to deliver them into the cells. To the authors knowledge, this study is the first describing miRNA-loaded hydrogels with antibacterial effect and anti-inflammatory features. Such system can become a tool for the treatment of infected wounds, e.g., diabetic ulcers, as well as for foreign body response modulation.

Implants and prostheses are widely used to replace damaged tissues or to treat various diseases. However, besides the risk of bacterial or fungal infection, an inflammatory response usually occurs. Here, recent progress in the field of anti‐inflammatory biomaterials is described. Different materials and approaches are used to decrease the inflammatory response, including hydrogels, nanoparticles, implant surface coating by polymers, and a variety of systems for anti‐inflammatory drug delivery. Complex multifunctional systems dealing with inflammation, microbial infection, bone regeneration, or angiogenesis are also described. New promising stimuli‐responsive systems, such as pH‐ and temperature‐responsive materials, are also being developed that would enable an “intelligent” antiinflammatory response when the inflammation occurs. Together, different approaches hold promise for creation of novel multifunctional smart materials allowing better implant integration and tissue regeneration.

To fight against antibiotic‐resistant bacteria adhering and developing on medical devices, which is a growing problem worldwide, researchers are currently developing new “smart” materials and coatings. They consist in delivery of antimicrobial agents in an intelligent way, i.e., only when bacteria are present. This requires the use of new and sophisticated tools combining antimicrobial agents with lipids or polymers, synthetic and/or natural. In this review, three classes of innovative materials are described: hydrogels, nanomaterials, and thin films. Moreover, smart antibacterial materials can be classified into two groups depending on the origin of the stimulus used: those that respond to a nonbiological stimulus (light, temperature, electric and magnetic fields) and those that respond to a biological stimulus related to the presence of bacteria, such as changes in pH or bacterial enzyme secretion. The bacteria presence can induce a pH change that constitutes a first potential biological trigger allowing the system to become active. A second biological trigger signal consists in enzymes produced by bacteria themselves. A complete panel of recent studies will be given focusing on the design of such innovative smart materials that are sensitive to biological triggers.

The organ/tissue function replacement using implantable medical devices has become a pillar of modern medicine with a considerable level of success. Cochlear, orthopedic and dental implants are some of the examples of implantable medical devices with more than several million implantations per year. However, such an increased volume of use has also brought about an increased level of complications. One such complication is infections around medical devices, particularly in hospital settings where a significant portion of infections called ‘nosocomial infections’is closely related with implanted devices. Although there are certain indications such as smoking, presence of chronic systemic diseases and so on, there is no current method available to predict such medical complications.

In this communication, we demonstrate that dopamine is able to undergo a polymerisation process in (PLL-HA)n polyelectrolyte multilayer films, and that this polymerisation is of the same nature as in solution at pH 8.5. This polymerisation changes the chemical composition and decreases the mobility of the PLL chains in the film, and ultimately allows the easy detachment of the film as free-standing membranes with 0.1 M HCl solutions.

Correction for ‘Multivalency: influence of the residence time and the retraction rate on rupture forces measured by AFM’ by Jalal Bacharouche et al., J. Mater. Chem. B, 2015, 3, 1801–1812.

International audience; We reported herein an efficient method for constructing dendritic bisphosphonic acid tweezers of generations 1 and 2, which have been proven as versatile surface coatings for metal oxides implant or nanoparticles. These procedures delineated a practical and general route to a library of functional dendrons. Several of these dendritic architectures were successfully tested as biocompatible coverings for iron oxide nanoparticles through in vitro assays, but also as antifouling surface coatings for silica through Quartz Crystal Microbalance studies or as stabilizing structure for magnetic nanoparticles-microbubbles conjugates thanks to preliminary Langmuir monolayers studies.

International audience; Implantation of biomedical devices is often followed by bacterial infections that may seriously affect implant functionalities and lead to their failure. In the context of bacterial resistance to antibiotics, which is a growing problem worldwide, new strategies that are able to overcome these problems are needed. In this work, we introduce a new formulation of hyaluronic acid (HA)-based antimicrobial material: HA hydrogels loaded with polyarginine (PAR), a polycationic antibiotic substitute. The loading is possible through electrostatic interactions between negatively charged HA and positively charged PAR. Such hydrogels absorb high quantities of PAR, which are then gradually released from the hydrogel. This original system provides a long-lasting antibacterial effect on an in vitro model of repetitive infection, thus demonstrating a strong potential to fight multiple rounds of infections that are resistant to antibiotic treatment. In addition, HA-PAR hydrogels could be deposited onto/into medical devices such as wound dressings and mesh prostheses used in clinical applications. Finally, we performed first in vivo tests of hydrogel-coated mesh materials to verify their biocompatibility in a rat model, which show no difference between control HA hydrogel and PAR-loaded hydrogel in terms of inflammation.

Islet transplantation is one of the most efficient cell therapies used in clinics and could treat a large proportion of patients with diabetes. However, it is limited by the high requirement of pancreas necessary to provide the sufficient surviving islet mass in the hepatic tissue and restore normoglycaemia. Reduction in organ procurement requirements could be achieved by extrahepatic transplantation using a biomaterial that enhances islet survival and function. We report a plasma-supplemented hydroxypropyl methylcellulose (HPMC) hydrogel, engineered specifically using a newly developed technique for intra-omental islet infusion, known as hOMING (h-Omental Matrix Islet filliNG). The HPMC hydrogel delivered islets with better performance than that of the classical intrahepatic infusion. After the validation of the HPMC suitability for islets in vivo and in vitro, plasma supplementation modified the rheological properties of HPMC without affecting its applicability with hOMING. The biomaterial association was proven to be more efficient both in vitro and in vivo, with better islet viability and function than that of the current clinical intrahepatic delivery technique. Indeed, when the islet mass was decreased by 25% or 35%, glycaemia control was observed in the group of plasma-supplemented hydrogels, whereas no regulation was observed in the hepatic group. Plasma gelation, observed immediately post infusion, decreased anoïkis and promoted vascularisation. To conclude, the threshold mass for islet transplantation could be decreased using HPMC-Plasma combined with the hOMING technique. The simplicity of the hOMING technique and the already validated use of its components could facilitate its transfer to clinics. STATEMENT OF SIGNIFICANCE: One of the major limitations for the broad deployment of current cell therapy for brittle type 1 diabetes is the islets' destruction during the transplantation process. Retrieved from their natural environment, the islets are grafted into a foreign tissue, which triggers massive cell loss. It is mandatory to provide the islets with an 3D environment specifically designed for promoting isletimplantation to improve cell therapy outcomes. For this aim, we combined HPMC and plasma. HPMC provides suitable rheological properties to the plasma to be injectable and be maintained in the omentum. Afterwards, the plasma polymerises around the graft in vivo, thereby allowing their optimal integration into their transplantation site. As a result, the islet mass required to obtain glycaemic control was reduced by 35%.

Surface texturing is an easy way to control wettability as well as bacterial adhesion. Air trapped in the surface texture of an immersed sample was often proposed as the origin of the low adhesion of bacteria to surfaces showing superhydrophobic properties. In this work, we identified two sets of femtosecond laser processing parameters that led to extreme superhydrophobic textures on a silicone elastomer but showed opposite behavior against

Surface of the implantable devices is the root cause of several complications such as infections, implant loosening and chronic inflammation. There is an urgent need for multifunctional coatings that can address these shortcomings simultaneously in a manner similar to the structures of extracellular matrix. Herein, we developed a coating system composed of ECM components and a naturally derived polypeptide. The interactions between the coating components create an environment that enables incorporation of an antimicrobial/angiogenic polypeptide. The film composition is based gelatin and hyaluronic acid modified with aldehyde groups (HA-Ald) that can react with poly (arginine) (PAR) through transient interactions. Nanoplasmon measurements demonstrated a significantly higher loading of PAR in films containing HA-Ald with longer retention of PAR in the structure. The presence of PAR not only provides to the film surface antimicrobial (contact-killing) properties but also increased endothelial cell-cell contacts (PECAM) and VEGFA gene expression and secretion by human vascular endothelial cells. This multifunctional coating can be easily applied to surface of implants where it can enact on several problems simultaneously.

Porous titanium implants are widely used in dental, orthopaedic and otorhinolaryngology fields to improve implant integration to host tissue. A possible step further to improve the integration with the host is the incorporation of autologous cells in porous titanium structures via cell-laden hydrogels. Fast gelling hydrogels have advantageous properties for in situ applications such as localisation of specific cells and growth factors at a target area without dispersion. The ability to control the cell types in different regions of an implant is important in applications where the target tissue (i) has structural heterogeneity (multiple cell types with a defined spatial configuration with respect to each other); (ii) has physical property gradients essential for its function (such as in the case of osteochondral tissue transition). Due to their near immediate gelation, such gels can also be used for site-specific modification of porous titanium structures, particularly for implants which would face different tissues at different locations. Herein, we describe a step by step design of a model system: the model cell-laden gel-containing porous titanium implants in the form of titanium microbead/hydrogel (maleimide-dextran or maleimide-PVA based) microhybrids. These systems enable the determination of the effect of titanium presence on gel properties and encapsulated cell behaviour as a miniaturized version of full-scale implants, providing a system compatible with conventional analysis methods. We used a fibroblast/vascular endothelial cell co-cultures as our model system and by utilising single microbeads we have quantified the effect of gel microenvironment (degradability, presence of RGD peptides within gel formulation) on cell behaviour and the effect of the titanium presence on cell behaviour and gel formation. Titanium presence slightly changed gel properties without hindering gel formation or affecting cell viability. Cells showed a preference to move towards the titanium beads and fibroblast proliferation was significantly higher in hybrids compared to gel only controls. The MMP (Matrix Metalloproteinase)-sensitive hydrogels induced sprouting by cells in co-culture configuration which was quantified by fluorescence microscopy, confocal microscopy and qRT-PCR (Quantitative Reverse transcription polymerase chain reaction). When the microhybrid up-scaled to 3D thick structures, cellular localisation in specific areas of the 3D titanium structures was achieved, without decreasing overall cell proliferation compared to titanium only scaffolds. Microhybrids of titanium and hydrogels are useful models for deciding the necessary modifications of metallic implants and they can be used as a modelling system for the study of tissue/titanium implant interactions. Statement of Significance This article demonstrates a method to apply cell-laden hydrogels to porous titanium implants and a model of titanium/hydrogel interaction at micro-level using titanium microbeads. The feasibility of site-specific modification of titanium implants with cell-laden microgels has been demonstrated. Use of titanium microbeads in combination with hydrogels with conventional analysis techniques as described in the article can facilitate the characterisation of surface modification of titanium in a relevant model system.

We investigate the effect of stretching on the secondary structure of cross-linked poly(l-lysine)/hyaluronic acid (PLL/HA) multilayers. We show that stretching these films induces changes in the secondary structure of PLL chains. Our results suggest that not only α- but also 310-helices might form in the film under stretching. Such 310-helices have never been observed for PLL so far. These changes of the secondary structure of PLL are reversible, i.e., when returning to the nonstretched state one recovers the initial film structure. Using molecular dynamics simulations of chains composed of 20 l-lysine residues (PLL20), we find that these chains never adopt a helical conformation in water. In contrast, when the end-to-end distance of the chains is restrained to values smaller than the mean end-to-end distance of free chains, a distance domain rarely explored by the free chains, helical conformations become accessible. Moreover, the formation of not only α- but also 310-helices is predicted by the simulations. These results suggest that the change of the end-to-end distance of PLL chains in the stretched film is at the origin of the helix formation. journal article research support, non-u.s. gov't 2016 06 22 2015 12 08 imported

International audience; Gold nanoparticle (AuNP) interaction with the blood compartment as a function of their charge and the binding energy of their surface ligand was explored. Citrate, polyallylamine and cysteamine stabilized AuNP along with dihydrolipoic acid and polyethylene glycol capped AuNP were synthesized and fully characterized. Their interactions with model proteins (human albumin and human fibrinogen) were studied. Complexes formed between AuNP and protein revealed several behaviors ranging from corona formation to aggregation. Protein fluorescence quenching as a function of temperature and AuNP concentration allowed the determination of the thermodynamic parameters describing these interactions. The hemolysis induced by AuNP was also probed: an increasing or a decreasing of hemolysis ratio induced by AuNP was observed as of function of protein corona formation. Taken together, our results drew up a composite sketch of an ideal surface ligand for blood compatible AuNP. This capping agent should be strongly bound to the gold core by one or more thiol groups and it must confer a negative charge to the particles.

International audience; Thermoresponsive polymers, undergoing a reversible chemical or physical change using temperature as stimulus, attract increasing interest in particular as adaptable biomaterials. Except for zwitterionic polymers, fully charged polymers require the presence of specific ions to exhibit an upper critical solution temperature (UCST) in water. Herein, we report the discovery of an UCST in pure water for fully cationic comb polymers based on oligoarginine pendent grafts. These polymers were prepared using an original strategy based on solid-phase peptide synthesis of pentaarginine methacrylate-based macromonomer and its polymerization through reversible addition-fragmentation chain transfer. Despite their cationic nature, guanidinium groups from the arginine have the ability to self-associate at low temperature through hydrophobic interactions into stacked pair configuration defying the expected Coulomb interactions. These results pave the way to biomedical applications such as antimicrobial materials and drug delivery systems through the tuning of the polymer structure.

Antibiotic resistance in bacterial cells has motivated the scientific community to design new and efficient (bio)materials with targeted bacteriostatic and/or bactericide properties. In this work, a series of polyelectrolyte multilayer films differing in terms of polycation-polyanion combinations are constructed according to the layer-by-layer deposition method. Their capacities to host T4 and φx174 phage particles and maintain their infectivity and bacteriolytic activity are thoroughly examined. It is found that the macroscopic physicochemical properties of the films, which includes film thickness, swelling ratio, or mechanical stiffness (as derived by atomic force microscopy and spectroscopy measurements), do not predominantly control the selectivity of the films for hosting infective phages. Instead, it is evidenced that the intimate electrostatic interactions locally operational between the loaded phages and the polycationic and polyanionic PEM components may lead to phage activity reduction and preservation/enhancement, respectively. It is argued that the underlying mechanism involves the screening of the phage capsid receptors (operational in cell recognition/infection processes) because of the formation of either polymer-phage hetero-assemblies or polymer coating surrounding the bioactive phage surface.

International audience; Nowadays, the need for therapeutic biomaterials displaying anti-inflammatory properties to fight against inflammation-related diseases is continuously increasing. Compact polyelectrolyte complexes (CoPECs) represent a new class of materials obtained by ultracentrifugation of a polyanion/polycation complex suspension in the presence of salt. Here, a noncytotoxic β-cyclodextrin-functionalized chitosan/alginate CoPEC was formulated, characterized, and described as a promising drug carrier displaying an intrinsic anti-inflammatory property. This new material was successfully formed, and due to the presence of cyclodextrins, it was able to trap and release hydrophobic drugs such as piroxicam used as a model drug. The intrinsic anti-inflammatory activity of this CoPEC was analyzed in vitro using murine macrophages in the presence of lipopolysaccharide (LPS) endotoxin. In this model, it was shown that CoPEC inhibited LPS-induced TNF-α and NO release and moderated the differentiation of LPS-activated macrophages. Over time, this kind of bioactive biomaterial could constitute a new family of delivery systems and expand the list of therapeutic tools available to target inflammatory chronic diseases such as arthritis or Crohn’s disease.