Search

The current desulfurization technology, hydrodesulfurization (HDS), is energy intensive, uses large quantities of hydrogen, and is ineffective at removing some sulfur compounds. Ionic liquids have been recently shown to perform well as extraction solvents for the removal of sulfur from diesel. However, a major limitation towards their industrial use is the low mass transfer rates that result from their relatively high viscosities. This study investigates the use of ultrasound to overcome this problem. The ionic liquid, 1-ethyl-3-methylimidazolium acetate ([C2mim][CH3COO]), was used to desulfurize model diesel consisting of dibenzothiophene in hexadecane, in the absence and presence of ultrasound. It was found that sonification can greatly enhance the rate of mass transfer of DBT from diesel to the IL, resulting in a 57% sulfur removal for a 75% decrease in extraction time for batch studies, which results in a reduction in the number of equilibrium stages necessary for a continuous extraction process.

In this work, a new class of fourth-generation, zero ozone depletion potential, hydrofluoroolefin-based blowing agents were used to prepare phenolic foam. While hydrofluoroolefin blowing agents have been used previously to prepare polyurethane foams, few studies have been reported on their use in phenolic foams. We introduce an effective method for foam preparation using two low-boiling blowing agents, cis-1,1,1,4,4,4-hexafluoro-2-butene and trans-1,1,1,4,4,4-hexafluoro-2-butene, and their combinations with hexane. Traditionally, phenolic foams have been prepared using chlorofluorocarbons and hydrochlorofluorocarbons, which can have harmful effects on the environment due to their high ozone depletion potential or global warming potential. Conductor-like screening model for real solvents (COSMO-RS) modeling studies were performed to understand the effects of different blowing agent combinations on their boiling points. A series of phenolic foams were prepared by varying the concentration of the hydrofluoroolefin and the hydrofluoroolefin–hexane blowing agent combinations. The concentrations of the surfactant, Agnique CSO 30, and the toughening agent, polyethylene glycol, were also varied to yield a formulation with the optimal properties. The foams formulated with the hydrofluoroolefin–hexane mixture displayed a higher compressive strength and a lower thermal conductivity than those prepared with either hydrofluoroolefin or hexane alone. The cell microstructure of all the foams was examined using scanning electron microscopy. By introducing flexible chains into the resin matrix, PEG facilitates proper distribution of hydrofluoroolefin–hexane blowing agents and other reagents and thereby increases the mechanical strength of the foam. [ABSTRACT FROM AUTHOR]

In the selection and design of ionic liquids (ILs) for various applications, including heat transfer fluids, thermal energy storage materials, fuel cells, and solvents for chemical processes, heat capacity is a key thermodynamic property. While several attempts have been made to develop predictive models for the estimation of the heat capacity of ILs in their liquid phase, none so far have been reported for the ILs' solid crystal phase. This is particularly important for applications where ILs will be used for thermal energy storage in the solid phase. For the first time, a model has been developed and used for the prediction of crystal phase heat capacity based on extending and modifying a previously developed hybrid group contribution model (GCM) for liquid phase heat capacity. A comprehensive database of over 5000 data points with 71 unique crystal phase ILs, comprising 42 different cations and 23 different anions, was used for parameterization and testing. This hybrid model takes into account the effect of the anion core, cation core, and subgroups within cations and anions, in addition to the derived indirect parameters that reflect the effects of branching and distribution around the core of the IL. According to the results, the developed GCM can reliably predict the crystal phase heat capacity with a mean absolute percentage error of 6.78%. This study aims to fill this current gap in the literature and to enable the design of ILs for thermal energy storage and other solid phase applications. [ABSTRACT FROM AUTHOR]