Search

Excess minority carriers create boron-related recombination centers that degrade the efficiency of the non-particle-irradiated silicon solar cells. However, the carrier-induced reactions among the radiation-induced defects are poorly understood for devices exposed to particle radiation. This study investigates the structure, electronic properties, formation and annihilation mechanisms, and diffusion dynamics of the carrier-induced defects in particle-irradiated boron-doped silicon using density-functional modeling and junction spectroscopy. By revisiting the ground-state structures of the boron-di-interstitial clusters (B I 2), we find that the calculated acceptor and donor levels of such defects agree well quantitatively with the carrier-induced deep-level transient spectroscopy (DLTS) hole emission signatures at 0.43 and 0.53 eV above the valence band edge (E v), respectively. We also find that the formation of B I 2 is thermally activated by an energy of 0.50 eV, which we explain theoretically by the reduction of the migration barrier of mono-interstitials to 0.53 eV in the presence of excess minority carriers. Moreover, we discover that the B I 2 are potentially mobile with a migration barrier of 1.18 eV, contrary to the present understanding. [ABSTRACT FROM AUTHOR]

The microstructure, corrosion behavior, and electrochemical behavior of as-cast Mg-4Y-xZn (x=1,2,3,4 wt.%) are studied by SEM, weight loss and electrochemical tests. Mg12YZn (X), Mg3Y2Zn3 (W) and Mg24Y5 constitute the phase composition system of the alloy. When Zn content is 1 wt.%, all tests reveal that alloy has the optimal corrosion performance. The second phase in these alloys, due to their nobler nature than α-Mg, exists as a cathode during the corrosion process, so that α-Mg preferentially occurs corrosion to accelerate the formation of corrosion pits. After soaking in 3.5 wt.% NaCl solution for some time, the stability of the W phase changed, and gradually dissolved, which was finally removed by chromic acid used for removal of corrosion products. In addition, X phase can be used as an anode in the micro-galvanic cells formed with W phase to reduce the corrosion rate of α-Mg and thus improve the corrosion performance of the alloy.

In the present work, the distortion modes and ferroelectric properties of Sr3(Sn1−xZrx)2O7 (x = 0.0, 0.25, 0.5, 0.75, 1.0) ceramics with double-layered Ruddlesden–Popper structures were investigated. The amplitudes of three distortion modes for the ferroelectric phase deviated from the aristotype one were quantified using the symmetry-mode approach adopted in Rietveld refinement against x-ray diffraction patterns. The remanent polarization and the coercive field decreased with increasing the content of Zr4+ cations. The decline of polarization should attribute to the nonpolar secondary phase, while the suppression of a coercive field may connect with the decreased amplitude of the rotation mode. The Curie temperatures increased linearly with increasing x value in Sr3(Sn1−xZrx)2O7 ceramics, inducing from the decline of a tolerance factor. A typical first-order improper ferroelectric phase transition was determined using a differential scanning calorimetry measurement and dielectric characterization. From the present work, a straightforward way to quantify the amplitude of a distortion mode for the ferroelectric phase was given, and the ferroelectric properties could be effectively tuned by substituting the cations at the B site in the Sr-based hybrid improper ferroelectrics. [ABSTRACT FROM AUTHOR]

Ca3Ti2O7 with a Ruddlesden–Popper structure has received great scientific attention due to its high ferroelectric polarization. However, the optimization of hybrid improper ferroelectricity is still a challenging issue. In the present work, the remarkably improved ferroelectric polarization has been achieved in B-site co-substituted Ca3Ti1.8Al0.1Nb0.1O7 ceramic. The improved ferroelectric polarization in this ceramic stems from the higher ferroelectric activity of Nb5+ cations and a larger amplitude of oxygen octahedral distortion. Moreover, the more saturated electric hysteresis loops together with the higher ferroelectric polarization can be achieved under a higher electric field and at a lower frequency. The first-order phase transition nature is proved by the thermal hysteresis, while the Curie temperature is directly proportioned to the tolerance factor. The present work provides an effective way to improve the ferroelectric properties without declining the Curie temperature in Ca3Ti2O7-based hybrid improper ferroelectricities. [ABSTRACT FROM AUTHOR]

Hybrid improper ferroelectricity, which is induced by the coupling of oxygen octahedral rotation and tilt in oxide materials, has great potential to create single-phase multiferroic materials with intrinsic electric field-controlled magnetism. Based on previous experiments with bi-layered Ruddlesden-Popper Sr-based materials, hybrid improper ferroelectricity in Sr3Hf2O7 was investigated by first-principle calculations in the present work. The results show that the ferroelectric A21am phase has the lowest energy among all possible phases, indicating that it is the ground state. The spontaneous polarization calculated by the Berry phase approach and Born effective charge model is approximately 4.6 μC/cm2, in agreement with those reported for other Sr-based compounds. Compared to Ca3Ti2O7, the smaller polarization of Sr3Hf2O7 is attributed to the negative contribution of the HfO2 layer to global polarization. The possible ferroelectric switching path was determined using the nudged elastic band method. The energy barriers of the two four-step paths across the non-polar Pbnm and Pnab phases are almost the same, and they are the lowest energies among all possible paths. Competition between these paths can help us understand complex phase transitions in analogous compounds. In summary, hybrid improper ferroelectricity was predicted in Sr3Hf2O7 for the first time, and the possible ferroelectric switching paths were determined. [ABSTRACT FROM AUTHOR]

Hybrid improper ferroelectricity, which is induced by the coupling of oxygen octahedral rotation and tilt in oxide materials, has great potential to create single-phase multiferroic materials with intrinsic electric field-controlled magnetism. Based on previous experiments with bi-layered Ruddlesden-Popper Sr-based materials, hybrid improper ferroelectricity in Sr3Hf2O7 was investigated by first-principle calculations in the present work. The results show that the ferroelectric A21am phase has the lowest energy among all possible phases, indicating that it is the ground state. The spontaneous polarization calculated by the Berry phase approach and Born effective charge model is approximately 4.6 μC/cm2, in agreement with those reported for other Sr-based compounds. Compared to Ca3Ti2O7, the smaller polarization of Sr3Hf2O7 is attributed to the negative contribution of the HfO2 layer to global polarization. The possible ferroelectric switching path was determined using the nudged elastic band method. The energy barriers of the two four-step paths across the non-polar Pbnm and Pnab phases are almost the same, and they are the lowest energies among all possible paths. Competition between these paths can help us understand complex phase transitions in analogous compounds. In summary, hybrid improper ferroelectricity was predicted in Sr3Hf2O7 for the first time, and the possible ferroelectric switching paths were determined. [ABSTRACT FROM AUTHOR]

Hybrid improper ferroelectricity is induced by the coupling of oxygen octahedral rotation and tilt, and it may provide a promising way to develop new room-temperature single-phase multiferroic materials with a strong magnetoelectric effect. Though ferroelectric polarizations are confirmed by the electric hysteresis loops at room temperature, the ferroelectric-paraelectric phase transition has not been well understood. In the present work, the crystal structures, dielectric properties, and phase transition behaviors of Ruddlesden-Popper Sr3–xCaxSn2O7 ceramics are thoroughly determined. Ferroelectricity is confirmed through the polarization-electric field hysteresis loops at room temperature, and the Curie temperature is identified by the variable-temperature differential scanning calorimetric analysis and dielectric characterization. The polarizations and Curie temperatures of the present ceramics increase with increasing the calcium content. An improper ferroelectric transition is experimentally evidenced by a small dielectric constant and a step variation of dielectric constant around the Curie temperature, and the thermal hysteresis of dielectric constant confirms the first order transition nature. Moreover, the fitting result of Landau phase transition theory also suggests the first-order improper ferroelectric transition nature. The variable-temperature Raman result implies a tetragonal paraelectric phase above TC. The present work confidently confirms the first-order hybrid improper ferroelectric transitions in the present ceramics, and ferroelectric properties can be readily tuned by substituting the cations at the A-site. [ABSTRACT FROM AUTHOR]

In order to solve the scheduling and path planning problems of multi-AGVs in an intelligent manufacturing workshop, it is necessary to consider loading, unloading, and transporting the workpiece of each AGV at the same time. A step task scheduling and path optimization mode of AGV is proposed. The process is as follows: Firstly, a mathematical model algorithm and a material transportation task allocation algorithm based on the urgency degree of workpiece processing were established for the optimization objective, and all workpiece transportation task sequences between shelves and processing equipment were assigned to the corresponding AGV to generate the initial feasible path of each AGV. Then, the AGV collision detection and anti-collision algorithm are designed to plan the global collision-free walking path of multi-AGVs in the workshop, and the path can be dynamically adjusted according to the delivery task. The model is solved by a heuristic algorithm ant colony algorithm and MATLAB coding. Finally, an example is given to verify the effectiveness of the method, which can effectively solve the task allocation of multi-AGVs and avoid collision path planning based on the transportation task sequence, and improve the work efficiency of AGV. This research can provide a theoretical basis and practical reference for realizing multi AGVs collaborative scheduling by using AGV automated material transport system in an intelligent production workshop. [ABSTRACT FROM AUTHOR]

Hybrid improper ferroelectricity (HIF) has been proposed as a candidate approach to create room- temperature multiferroic materials with an intrinsic electric-field controlled magnetism effect, and HIFs in bi-layered Ruddlesden-Popper Ca3-xSrxTi2O7 ceramics have been confirmed in the present work. The ferroelectric hysteresis loops are observed in these ceramics at room temperature, and the polar orthorhombic structures with oxygen octahedral rotation and tilt modes have been confirmed by room-temperature X-ray powder diffraction. The amplitudes of oxygen octahedral rotation and tilt modes decrease with the increasing x value, which in turn leads to the decrease of remnant polarization in these ceramics. A first-order phase transition has been evidenced by the differential scanning calorimetry measurement, and the temperature of phase transition decreases linearly with the increasing content of strontium cations. It is found that the amplitude of oxygen octahedral distortion is the dominating factor that affects ferroelectric polarization in partial-ordered bi-layered Ca3Ti2O7-based ceramics. [ABSTRACT FROM AUTHOR]