Search

Large-area gratings play a crucial role in various engineering fields. However, traditional interference lithography is limited by the size of optical component apertures, making large-area fabrication a challenging task. Here, a method for fabricating laser interference lithography pattern arrays with a global alignment reference strategy is proposed. This approach enables alignment of each area of the laser interference lithography pattern arrays, including phase, period, and tilt angle. Two reference gratings are utilized: one is detached from the substrate, while the other remains fixed to it. To achieve global alignment, the exposure area is adjusted by alternating between moving the beam and the substrate. In our experiment, a 3 $\times$ 3 regions grating array was fabricated, and the $-1$st-order diffraction wavefront measured by the Fizeau interferometer exhibited good continuity. This technique enables effective and efficient alignment with high accuracy across any regions in an interference lithography pattern array on large substrates., Comment: 13 pages, 8 figures

Subwavelength grating micro-polarizer arrays, as a type of focal plane division simultaneous detection method, are significantly advancing the development and practical application of polarization imaging technology. Based on the cross-scale, dual-period characteristics of the grating array, this paper proposes a fabrication method that combines laser interference lithography with contact lithography. This method constructs a complete single-layer micro-polarizer array photoresist pattern through a four-step lithography process. Compared to traditional point-by-point fabrication methods like EBL and FIB, the patterning time is reduced by 3 to 4 orders of magnitude. Additionally, by introducing a refractive index matching liquid and an alignment method based on substrate contours, the effects of gaps and splicing errors are minimized, resulting in high-quality photoresist patterns with splicing errors less than 1{\mu}m. Finally, a double-layer metal grating structure was obtained through pattern transfer. Performance tests show that the micro-polarizer array achieves a maximum transmittance of over 50% and an extinction ratio exceeding 15dB in the 3-15{\mu}m wavelength range. This exploration offers a low-cost, high-efficiency path for fabricating micro-polarizer arrays., Comment: 23 pages, 13figures

This paper presents a novel heterodyne grating interferometer designed to meet the precise measurement requirements of next-generation lithography systems and large-scale atomic-level manufacturing. Utilizing a dual-frequency light source, the interferometer enables simultaneous measurement of three degrees of freedom. Key advancements include a compact zero Dead-Zone optical path configuration, significantly enhancing measurement reliability by mitigating the impact of light source fluctuations and air refractive index variations. A comprehensive crosstalk error analysis was conducted, resulting in a robust correction algorithm that reduces errors to below 5%. Performance testing of the prototype, size of 90mm*90mm*40mm, demonstrated exceptional resolution (0.25 nm in the XY-axis and 0.3 nm in the Z-axis), superior linearity (6.9e-5, 8.1e-5 and 16.2e-5 for the X, Y, and Z axes, respectively), high repeatability (0.8 nm/1000 nm for the three axes) and stability (20 nm for the XY-axis and 60 nm for the Z-axis over 1000 seconds). Comparative analysis with existing measurement sensors highlights the proposed method's significant advantages in integration, multidimensional capabilities, and is expected to be widely used in fields such as integrated circuits, atomic-level manufacturing and aerospace technology., Comment: 8 pages,11 figures

Due to the unique characteristics of underwater environments, accurate 3D reconstruction of underwater objects poses a challenging problem in tasks such as underwater exploration and mapping. Traditional methods that rely on multiple sensor data for 3D reconstruction are time-consuming and face challenges in data acquisition in underwater scenarios. We propose UW-SDF, a framework for reconstructing target objects from multi-view underwater images based on neural SDF. We introduce hybrid geometric priors to optimize the reconstruction process, markedly enhancing the quality and efficiency of neural SDF reconstruction. Additionally, to address the challenge of segmentation consistency in multi-view images, we propose a novel few-shot multi-view target segmentation strategy using the general-purpose segmentation model (SAM), enabling rapid automatic segmentation of unseen objects. Through extensive qualitative and quantitative experiments on diverse datasets, we demonstrate that our proposed method outperforms the traditional underwater 3D reconstruction method and other neural rendering approaches in the field of underwater 3D reconstruction., Comment: 8 pages, 9 figures, presented at IROS 2024

Recently, neural implicit 3D reconstruction in indoor scenarios has become popular due to its simplicity and impressive performance. Previous works could produce complete results leveraging monocular priors of normal or depth. However, they may suffer from over-smoothed reconstructions and long-time optimization due to unbiased sampling and inaccurate monocular priors. In this paper, we propose a novel neural implicit surface reconstruction method, named FD-NeuS, to learn fine-detailed 3D models using multi-level importance sampling strategy and multi-view consistency methodology. Specifically, we leverage segmentation priors to guide region-based ray sampling, and use piecewise exponential functions as weights to pilot 3D points sampling along the rays, ensuring more attention on important regions. In addition, we introduce multi-view feature consistency and multi-view normal consistency as supervision and uncertainty respectively, which further improve the reconstruction of details. Extensive quantitative and qualitative results show that FD-NeuS outperforms existing methods in various scenes., Comment: 7 pages, 3 figures, International Conference on Image Processing

The trend of employing training-free methods for point cloud recognition is becoming increasingly popular due to its significant reduction in computational resources and time costs. However, existing approaches are limited as they typically extract either geometric or semantic features. To address this limitation, we are the first to propose a novel training-free method that integrates both geometric and semantic features. For the geometric branch, we adopt a non-parametric strategy to extract geometric features. In the semantic branch, we leverage a model aligned with text features to obtain semantic features. Additionally, we introduce the GFE module to complement the geometric information of point clouds and the MFF module to improve performance in few-shot settings. Experimental results demonstrate that our method outperforms existing state-of-the-art training-free approaches on mainstream benchmark datasets, including ModelNet and ScanObiectNN.

Drawing freehand sketches of mechanical components on multimedia devices for AI-based engineering modeling has become a new trend. However, its development is being impeded because existing works cannot produce suitable sketches for data-driven research. These works either generate sketches lacking a freehand style or utilize generative models not originally designed for this task resulting in poor effectiveness. To address this issue, we design a two-stage generative framework mimicking the human sketching behavior pattern, called MSFormer, which is the first time to produce humanoid freehand sketches tailored for mechanical components. The first stage employs Open CASCADE technology to obtain multi-view contour sketches from mechanical components, filtering perturbing signals for the ensuing generation process. Meanwhile, we design a view selector to simulate viewpoint selection tasks during human sketching for picking out information-rich sketches. The second stage translates contour sketches into freehand sketches by a transformer-based generator. To retain essential modeling features as much as possible and rationalize stroke distribution, we introduce a novel edge-constraint stroke initialization. Furthermore, we utilize a CLIP vision encoder and a new loss function incorporating the Hausdorff distance to enhance the generalizability and robustness of the model. Extensive experiments demonstrate that our approach achieves state-of-the-art performance for generating freehand sketches in the mechanical domain. Project page: https://mcfreeskegen.github.io ., Comment: Published at ACM Multimedia (ACM MM) 2024

Point-drag-based image editing methods, like DragDiffusion, have attracted significant attention. However, point-drag-based approaches suffer from computational overhead and misinterpretation of user intentions due to the sparsity of point-based editing instructions. In this paper, we propose a region-based copy-and-paste dragging method, RegionDrag, to overcome these limitations. RegionDrag allows users to express their editing instructions in the form of handle and target regions, enabling more precise control and alleviating ambiguity. In addition, region-based operations complete editing in one iteration and are much faster than point-drag-based methods. We also incorporate the attention-swapping technique for enhanced stability during editing. To validate our approach, we extend existing point-drag-based datasets with region-based dragging instructions. Experimental results demonstrate that RegionDrag outperforms existing point-drag-based approaches in terms of speed, accuracy, and alignment with user intentions. Remarkably, RegionDrag completes the edit on an image with a resolution of 512x512 in less than 2 seconds, which is more than 100x faster than DragDiffusion, while achieving better performance. Project page: https://visual-ai.github.io/regiondrag., Comment: ECCV 2024, Project page: https://visual-ai.github.io/regiondrag

Recently, 3D Gaussian Splatting(3DGS) has revolutionized neural rendering with its high-quality rendering and real-time speed. However, when it comes to indoor scenes with a significant number of textureless areas, 3DGS yields incomplete and noisy reconstruction results due to the poor initialization of the point cloud and under-constrained optimization. Inspired by the continuity of signed distance field (SDF), which naturally has advantages in modeling surfaces, we present a unified optimizing framework integrating neural SDF with 3DGS. This framework incorporates a learnable neural SDF field to guide the densification and pruning of Gaussians, enabling Gaussians to accurately model scenes even with poor initialized point clouds. At the same time, the geometry represented by Gaussians improves the efficiency of the SDF field by piloting its point sampling. Additionally, we regularize the optimization with normal and edge priors to eliminate geometry ambiguity in textureless areas and improve the details. Extensive experiments in ScanNet and ScanNet++ show that our method achieves state-of-the-art performance in both surface reconstruction and novel view synthesis.

As large language models (LLMs) evolve, their integration with 3D spatial data (3D-LLMs) has seen rapid progress, offering unprecedented capabilities for understanding and interacting with physical spaces. This survey provides a comprehensive overview of the methodologies enabling LLMs to process, understand, and generate 3D data. Highlighting the unique advantages of LLMs, such as in-context learning, step-by-step reasoning, open-vocabulary capabilities, and extensive world knowledge, we underscore their potential to significantly advance spatial comprehension and interaction within embodied Artificial Intelligence (AI) systems. Our investigation spans various 3D data representations, from point clouds to Neural Radiance Fields (NeRFs). It examines their integration with LLMs for tasks such as 3D scene understanding, captioning, question-answering, and dialogue, as well as LLM-based agents for spatial reasoning, planning, and navigation. The paper also includes a brief review of other methods that integrate 3D and language. The meta-analysis presented in this paper reveals significant progress yet underscores the necessity for novel approaches to harness the full potential of 3D-LLMs. Hence, with this paper, we aim to chart a course for future research that explores and expands the capabilities of 3D-LLMs in understanding and interacting with the complex 3D world. To support this survey, we have established a project page where papers related to our topic are organized and listed: https://github.com/ActiveVisionLab/Awesome-LLM-3D.

We present GenesisTex, a novel method for synthesizing textures for 3D geometries from text descriptions. GenesisTex adapts the pretrained image diffusion model to texture space by texture space sampling. Specifically, we maintain a latent texture map for each viewpoint, which is updated with predicted noise on the rendering of the corresponding viewpoint. The sampled latent texture maps are then decoded into a final texture map. During the sampling process, we focus on both global and local consistency across multiple viewpoints: global consistency is achieved through the integration of style consistency mechanisms within the noise prediction network, and low-level consistency is achieved by dynamically aligning latent textures. Finally, we apply reference-based inpainting and img2img on denser views for texture refinement. Our approach overcomes the limitations of slow optimization in distillation-based methods and instability in inpainting-based methods. Experiments on meshes from various sources demonstrate that our method surpasses the baseline methods quantitatively and qualitatively., Comment: 12 pages, 10 figures

Addressing the challenge of data scarcity in industrial domains, transfer learning emerges as a pivotal paradigm. This work introduces Style Filter, a tailored methodology for industrial contexts. By selectively filtering source domain data before knowledge transfer, Style Filter reduces the quantity of data while maintaining or even enhancing the performance of transfer learning strategy. Offering label-free operation, minimal reliance on prior knowledge, independence from specific models, and re-utilization, Style Filter is evaluated on authentic industrial datasets, highlighting its effectiveness when employed before conventional transfer strategies in the deep learning domain. The results underscore the effectiveness of Style Filter in real-world industrial applications., Comment: 17 pages, 11 figures,4 tables

We propose GaussCtrl, a text-driven method to edit a 3D scene reconstructed by the 3D Gaussian Splatting (3DGS). Our method first renders a collection of images by using the 3DGS and edits them by using a pre-trained 2D diffusion model (ControlNet) based on the input prompt, which is then used to optimise the 3D model. Our key contribution is multi-view consistent editing, which enables editing all images together instead of iteratively editing one image while updating the 3D model as in previous works. It leads to faster editing as well as higher visual quality. This is achieved by the two terms: (a) depth-conditioned editing that enforces geometric consistency across multi-view images by leveraging naturally consistent depth maps. (b) attention-based latent code alignment that unifies the appearance of edited images by conditioning their editing to several reference views through self and cross-view attention between images' latent representations. Experiments demonstrate that our method achieves faster editing and better visual results than previous state-of-the-art methods., Comment: ECCV2024, Project Website: https://gaussctrl.active.vision/

Ensemble methods exploit the availability of a given number of classifiers or detectors trained in single or multiple source domains and tasks to address machine learning problems such as domain adaptation or multi-source transfer learning. Existing research measures the domain distance between the sources and the target dataset, trains multiple networks on the same data with different samples per class, or combines predictions from models trained under varied hyperparameters and settings. Their solutions enhanced the performance on small or tail categories but hurt the rest. To this end, we propose a modified consensus focus for semi-supervised and long-tailed object detection. We introduce a voting system based on source confidence that spots the contribution of each model in a consensus, lets the user choose the relevance of each class in the target label space so that it relaxes minority bounding boxes suppression, and combines multiple models' results without discarding the poisonous networks. Our tests on synthetic driving datasets retrieved higher confidence and more accurate bounding boxes than the NMS, soft-NMS, and WBF. The code used to generate the results is available in our GitHub repository: http://github.com/ErikValle/Consensus-focus-for-object-detection.

In this paper, we address the challenge of matching semantically similar keypoints across image pairs. Existing research indicates that the intermediate output of the UNet within the Stable Diffusion (SD) can serve as robust image feature maps for such a matching task. We demonstrate that by employing a basic prompt tuning technique, the inherent potential of Stable Diffusion can be harnessed, resulting in a significant enhancement in accuracy over previous approaches. We further introduce a novel conditional prompting module that conditions the prompt on the local details of the input image pairs, leading to a further improvement in performance. We designate our approach as SD4Match, short for Stable Diffusion for Semantic Matching. Comprehensive evaluations of SD4Match on the PF-Pascal, PF-Willow, and SPair-71k datasets show that it sets new benchmarks in accuracy across all these datasets. Particularly, SD4Match outperforms the previous state-of-the-art by a margin of 12 percentage points on the challenging SPair-71k dataset., Comment: Accepted to CVPR 2024. Project website: https://sd4match.active.vision/

We propose SimSC, a remarkably simple framework, to address the problem of semantic matching only based on the feature backbone. We discover that when fine-tuning ImageNet pre-trained backbone on the semantic matching task, L2 normalization of the feature map, a standard procedure in feature matching, produces an overly smooth matching distribution and significantly hinders the fine-tuning process. By setting an appropriate temperature to the softmax, this over-smoothness can be alleviated and the quality of features can be substantially improved. We employ a learning module to predict the optimal temperature for fine-tuning feature backbones. This module is trained together with the backbone and the temperature is updated online. We evaluate our method on three public datasets and demonstrate that we can achieve accuracy on par with state-of-the-art methods under the same backbone without using a learned matching head. Our method is versatile and works on various types of backbones. We show that the accuracy of our framework can be easily improved by coupling it with more powerful backbones.

In random sample consensus (RANSAC), the problem of ellipsoid fitting can be formulated as a problem of minimization of point-to-model distance, which is realized by maximizing model score. Hence, the performance of ellipsoid fitting is affected by distance metric. In this paper, we proposed a novel distance metric called the axial distance, which is converted from the algebraic distance by introducing a scaling factor to solve nongeometric problems of the algebraic distance. There is complementarity between the axial distance and Sampson distance because their combination is a stricter metric when calculating the model score of sample consensus and the weight of the weighted least squares (WLS) fitting. Subsequently, a novel sample-consensus-based ellipsoid fitting method is proposed by using the combination between the axial distance and Sampson distance (CAS). We compare the proposed method with several representative fitting methods through experiments on synthetic and real datasets. The results show that the proposed method has a higher robustness against outliers, consistently high accuracy, and a speed close to that of the method based on sample consensus., Comment: 13 pages

Absolute Pose Regression (APR) methods use deep neural networks to directly regress camera poses from RGB images. However, the predominant APR architectures only rely on 2D operations during inference, resulting in limited accuracy of pose estimation due to the lack of 3D geometry constraints or priors. In this work, we propose a test-time refinement pipeline that leverages implicit geometric constraints using a robust feature field to enhance the ability of APR methods to use 3D information during inference. We also introduce a novel Neural Feature Synthesizer (NeFeS) model, which encodes 3D geometric features during training and directly renders dense novel view features at test time to refine APR methods. To enhance the robustness of our model, we introduce a feature fusion module and a progressive training strategy. Our proposed method achieves state-of-the-art single-image APR accuracy on indoor and outdoor datasets., Comment: Paper Accepted by CVPR 2024. Project Page: http://nefes.active.vision. Code will be released at https://github.com/ActiveVisionLab/NeFeS

Transfer learning is a promising method for AOI applications since it can significantly shorten sample collection time and improve efficiency in today's smart manufacturing. However, related research enhanced the network models by applying TL without considering the domain similarity among datasets, the data long-tailedness of a source dataset, and mainly used linear transformations to mitigate the lack of samples. This research applies model-based TL via domain similarity to improve the overall performance and data augmentation in both target and source domains to enrich the data quality and reduce the imbalance. Given a group of source datasets from similar industrial processes, we define which group is the most related to the target through the domain discrepancy score and the number of samples each has. Then, we transfer the chosen pre-trained backbone weights to train and fine-tune the target network. Our research suggests increases in the F1 score and the PR curve up to 20% compared with TL using benchmark datasets., Comment: This is a fix of the published paper "Relational-based transfer learning for automatic optical inspection based on domain discrepancy"

For visual manipulation tasks, we aim to represent image content with semantically meaningful features. However, learning implicit representations from images often lacks interpretability, especially when attributes are intertwined. We focus on the challenging task of extracting disentangled 3D attributes only from 2D image data. Specifically, we focus on human appearance and learn implicit pose, shape and garment representations of dressed humans from RGB images. Our method learns an embedding with disentangled latent representations of these three image properties and enables meaningful re-assembling of features and property control through a 2D-to-3D encoder-decoder structure. The 3D model is inferred solely from the feature map in the learned embedding space. To the best of our knowledge, our method is the first to achieve cross-domain disentanglement for this highly under-constrained problem. We qualitatively and quantitatively demonstrate our framework's ability to transfer pose, shape, and garments in 3D reconstruction on virtual data and show how an implicit shape loss can benefit the model's ability to recover fine-grained reconstruction details.

We introduce a camera relocalization pipeline that combines absolute pose regression (APR) and direct feature matching. By incorporating exposure-adaptive novel view synthesis, our method successfully addresses photometric distortions in outdoor environments that existing photometric-based methods fail to handle. With domain-invariant feature matching, our solution improves pose regression accuracy using semi-supervised learning on unlabeled data. In particular, the pipeline consists of two components: Novel View Synthesizer and DFNet. The former synthesizes novel views compensating for changes in exposure and the latter regresses camera poses and extracts robust features that close the domain gap between real images and synthetic ones. Furthermore, we introduce an online synthetic data generation scheme. We show that these approaches effectively enhance camera pose estimation both in indoor and outdoor scenes. Hence, our method achieves a state-of-the-art accuracy by outperforming existing single-image APR methods by as much as 56%, comparable to 3D structure-based methods., Comment: ECCV 2022. Code released at https://github.com/ActiveVisionLab/DFNet

We tackle the problem of establishing dense pixel-wise correspondences between a pair of images. In this work, we introduce Dual-Resolution Correspondence Networks (DualRC-Net), to obtain pixel-wise correspondences in a coarse-to-fine manner. DualRC-Net extracts both coarse- and fine- resolution feature maps. The coarse maps are used to produce a full but coarse 4D correlation tensor, which is then refined by a learnable neighbourhood consensus module. The fine-resolution feature maps are used to obtain the final dense correspondences guided by the refined coarse 4D correlation tensor. The selected coarse-resolution matching scores allow the fine-resolution features to focus only on a limited number of possible matches with high confidence. In this way, DualRC-Net dramatically increases matching reliability and localisation accuracy, while avoiding to apply the expensive 4D convolution kernels on fine-resolution feature maps. We comprehensively evaluate our method on large-scale public benchmarks including HPatches, InLoc, and Aachen Day-Night. It achieves the state-of-the-art results on all of them., Comment: NeurIPS 2020, code at https://dualrcnet.active.vision/