Search

Next-generation IoT systems will allow sustainable performance in long-term monitoring systems. This sustainability concept applies to soundscape description, as it allows monitoring in urban environments. In this work, the implementation of psycho-acoustic annoyance models in a 5G-enabled IoT system is proposed, applying two edge-computing approaches. A modified Zwicker’s model is adopted in this research, introducing a term that takes into account the tonal component of the captured sound. These implementations have been validated in a measurement campaign where several IoT devices have been deployed to evaluate different sound environments of a university campus. Then, the analysis of the sound-quality metrics is conducted in a different location, showing that if tonality is present in a noisy environment, it results in greater subjective annoyance. Moreover, the Just-Noticeable Difference of these results is derived from Zwicker’s psycho-acoustic annoyance to establish a limitation for this metric.

This study analyses the detection efficiency of the Worldwide Lightning Location Network (WWLLN) of sensors over Spain, a comparison is made with the Meteorological Spanish Agency (AEMET) Lightning Detection Network. The WWLLN operates a planetary distributed network of Very Low Frequency (VLF) antennas which detect lightning VLF signals around the Earth. Very high currents from lightning strokes radiate strong VLF signals in the band 6-22 kHz, which are detected up to 10,000 km, therefore WWLLN receiving sensors can be sparsely spaced. However the detection capability of VLF signals depends on the environment, and clean areas with a good ground and no metal parts around must be selected for proper reception. For the area of Spain and Portugal we had two WWLLN sensors in 2012, and three sensors later on for the data of 2020, 2021 and 2022. The sensors in Iberian Peninsula are at a distance of around 760 km; that is very close in comparison with other WWLLN sensors in the Earth which are around 5.000-15.000 km. The WWLLN sensors send the timing of the detection to the central sensor where the location of the lightning is determined with an improved algorithm when a mini-mum of 5 sensors detect the VLF signal. We show that detection efficiency was excellent and consistent with previous studies. Lightning location data from 1st January 2012 to 30st April 2012 from AEMET was used to analyze time and space shared events with the WWLLN network with 0.5s time difference and 20 km distance. The results improved in 2020, 2021 and 2022. More than 40,000 lightning strikes were analyzed in the present work, and we found a detection efficiency > 38%.

Next Generation IoT systems will allow sustainable performance in long-term monitoring systems. This sustainability concept is applicable to soundscape description, as it allows monitoring in urban environments. In this work, the implementation of psycho-acoustic annoyance models in a 5G-enabled IoT system is proposed applying two Edge Computing approaches. A modified Zwicker’s model is adopted in this research, introducing a term that takes into account the tonal component of the captured sound. These implementations have been validated in a measurement campaign where several IoT devices have been deployed to evaluate different sound environments of a University Campus. Then, the analysis of the sound quality metrics is done in different location showing that if tonality is present in a noisy environment, it results in greater subjective annoyance. Moreover, the Just Noticeable Difference of these results are derived for the Zwicker’s psycho-acoustic annoyance to establish a limitation for this metric.

Traffic surveillance is an important issue for Intelligent Transportation Systems (ITS) that helps detect incidents automatically, such as wrong-way drivers, still-standing vehicles and jams. Sometimes these systems require a fast and short-term deployment of video cameras. In these cases, ad-hoc networks could be a low-cost and feasible option, but they have poor performance for video delivery. Thus, we propose a smart live video adaptive streaming technique in order to transport video streams from the cameras to the external road traffic monitoring servers. To achieve this goal, these networks need a thorough study in order to analyze video quality under their inherent constraints, given by their specific topologies (once deployed), video streaming protocol, nodes’ performance and routing protocols. From our results both in simulated and real scenarios, we demonstrate the feasibility of our proposal in these specific scenarios, validated with several performance metrics in terms of Quality of Service and video quality.

Sensor networks have become an extremely useful tool for monitoring and analysing many aspects of our daily lives. Noise pollution levels are very important today, especially in cities where the number of inhabitants and disturbing sounds are constantly increasing. Psycho-acoustic parameters are a fundamental tool for assessing the degree of discomfort produced by different sounds and, combined with wireless acoustic sensor networks (WASNs), could enable, for example, the efficient implementation of acoustic discomfort maps within smart cities. However, the continuous monitoring of psycho-acoustic parameters to create time-dependent discomfort maps requires a high computational demand that prevents real-time computations within the nodes. Moreover, sending audio streams outside of the WASN for their further computation, would require extra communication and computational efforts without warranting a real-time monitoring, with the added problem of violating some privacy laws. As a result, most existing systems for nuisance assessment are usually based on less accurate indicators that require lower computational cost. In this paper, we describe the design and analysis of a deep convolutional neural network (CNN) trained with a big dataset of typical sounds occurrying in a city. The CNN allows to predict the psycho-acoustic parameters considered by the well-known Zwicker’s psycho-acoustic nuisance model with great accuracy, directly from the raw recorded audio signal. The proposed CNN-based system has been tested on both desktop computers and typical WASN devices (such as Raspberry Pi), achieving very fast calculation times that allow real-time operation and a continuous monitoring of psycho-acoustic parameters.

Soundscape standard (ISO 12913) is mainly oriented to describe the psychoacoustic annoyance (PA) due to the perceived sound in different environments. The evaluation of this annoyance is commonly based on the Zwicker and Fastl model that defines several components related to this subjective annoyance, such as loudness, sharpness, roughness, and fluctuation strength. But due to their complexity, these components are difficult to be calculated on small board computers (SBCs) in real time in order to enable a wireless acoustic sensor network for PA monitoring. In this article, we describe the necessary procedures to implement the complete psychoacoustic model by Zwicker and Fastl in a precise and efficient way, keeping the standards and criteria defined for each model, adding hints to improve its performance. We evaluate their execution time on different platforms and languages, including SBCs, in particular on Raspberry Pi family. Thus, this article shows a feasible implementation of this monitoring approach on low-cost platforms as well as a visualization tool.

In recent years, Wireless Acoustic Sensor Networks (WASN) have been widely applied to different acoustic fields in outdoor and indoor environments. Most of these applications are oriented to locate or identify sources and measure specific features of the environment involved. In this paper, we study the application of a WASN for room acoustic measurements. To evaluate the acoustic characteristics, a set of Raspberry Pi 3 (RPi) has been used. One is used to play different acoustic signals and four are used to record at different points in the room simultaneously. The signals are sent wirelessly to a computer connected to a server, where using MATLAB we calculate both the impulse response (IR), and different acoustic parameters, such as the Speech Intelligibility Index (SII). In this way, the evaluation of room acoustic parameters with asynchronous IR measurements two different applications has been explored. Finally, the network features have been evaluated to assess the effectiveness of this system.

The proliferation of commercial low-cost Small Board Computers (SBC) devices have allowed the deployment of many Wireless Sensor Networks (WSN) focused on different applications, mainly based on monitoring issues. These networks are characterized by a set of these SBCs devices working in a collaborative way where each device is sensing, processing and later sending out the data to the sink. These devices are equipped with power supply, a processing unit and communications capabilities (in particular WiFi), making themselves very interesting to fit in many topologies. However, their performance in terms of communications basically depends on the environment and usually heuristic techniques are used with any guarantee if they will succeed or not. To model the different scenarios there are theoretically several approaches, such as ray tracing technique, two-ray, as well as semi-empirical models, but it should be interesting to analyze them also from a experimental point of view. In this paper we carry out a thorough performance analysis, in particular using Raspberry Pi3 (RPi3) devices, in order to understand their behavior in terms of Quality of Services (throughput, delay, losses and jitter (delay variation) for different types of communications: indoor and outdoor environments, with and without multipath reflections in order to establish precisely the amount of signal required depending on the required througput. In the outdoor environments, we analyze the QoS over the links between two nodes in a deployment.We conclude that using this type of devices we can achieve a throughput of more than 45 Mbps in indoor within distances shorter than 50 m and 40 Mbps in outdoor till 100 m and then it starts decaying till 300 m in normal conditions.

The Internet of Things (IoT) is a network widely used with the purpose of connecting almost everything, everywhere to the Internet. To cope with this goal, low cost nodes are being used, otherwise, it would be very expensive to expand so fast. These networks are set up with small distributed devices (nodes) that have a power supply, processing unit, memory, sensors, and wireless communications. In the market, we can find different alternatives for these devices, such as small board computers (SBCs), e.g., Raspberry Pi (RPi)), with different features. Usually these devices run a coarse version of a Linux operating system. Nevertheless, there are many scenarios that require enhanced computational power that these nodes alone are unable to provide. In this context, we need to introduce a kind of collaboration among the devices to overcome their constraints. We based our solution in a combination of clustering techniques (building a mesh network using their wireless capabilities), at the same time we try to orchestrate the resources in order to improve their processing capabilities in an elastic computing fashion. This paradigm is called fog computing on IoT. We propose in this paper the use of cloud computing technologies, such as Linux containers, based on Docker, and a container orchestration platform (COP) to run on the top of a cluster of these nodes, but adapted to the fog computing paradigm. Notice that these technologies are open source and developed for Linux operating system. As an example, in our results we show an IoT application for soundscape monitoring as a proof of concept that it will allow us to compare different alternatives in its design and implementation, in particular, with regard to the COP selection, between Docker Swarm and Kubernetes. We conclude that using and combining these techniques, we can improve the overall computation capabilities of these IoT nodes within a fog computing paradigm.

In the last decade there has been an increasing interest and demand on the Internet of Things (IoT) and its applications. But, when a high level of computing and/or real time processing is required for these applications, different problems arise due to their requirements. In this context, low cost autonomous and distributed Small Board Computers (SBC) devices, with processing, storage capabilities and wireless communications can assist these IoT networks. Usually, these SBC devices run an operating system based on Linux. In this scenario, container-based technologies and fog computing are an interesting approach and both have led to a new paradigm in how devices cooperate, improving overall capacity in a cluster of these SBC devices. The use of containers is considered a lightweight virtualization, allowing an application to be broken into small tasks as services, enabling load balancing, flexibility and scalability. Nevertheless when the number of devices and containers increases in the cluster, it is required an orchestration layer. There are not many solutions and available alternatives using these technologies applied on these networks, and less an assessment of their performances. This paper focuses on these technologies when we use fog computing with low cost SBC devices in a context of IoT. We use Linux containers and different available orchestration platforms (in particular Docker Swarm and Kubernetes), to run on the top of the cluster of commercial SBC devices. Thus, we carry out a thorough functional and performance comparison with different real topologies (wired and wireless) and using both homogeneous and heterogeneous clusters of SBC devices, showing their results. We conclude that with the collected experimental results, Docker Swarm orchestration platform outperforms its counterparts in the scenarios shown.