Search

Objective: Quantification of tumour burden in oncology requires accurate and reproducible evaluation. The current standard is RECIST measurement with its inherent disadvantages. Volumetric analysis is an alternative for therapy monitoring. The aim of this study was to evaluate the feasibility of volumetric analysis of lymph node metastases using a software prototype in a follow-up setting.Methods: MSCT was performed in 50 patients covering the chest, abdomen and pelvis. A total of 174 suspicious lymph nodes were evaluated by two radiologists regarding short axis diameters and volumetric analysis using semi-automated software. Quality of segmentation, time, maximum diameter and volume were documented. Variability of the derived change rates was computed as the standard deviation of the difference of the obtained respective change rates.Results: The software performance provides robust volumetric analysis. Quality of segmentation was rated acceptable to excellent in 76-79% by each reader. Mean time spent per lesion was 38 s. The variability of change in effective diameters was 10.6%; for change rates of RECIST maximum diameter variability was 27.5%.Conclusion: Semi-automated volumetric analysis allows fast and convenient segmentation of most lymph node metastases. Compared with RECIST the inter-observer-variability in baseline and follow-up is reduced. This should principally allow subtle changes to be subclassified within the RECIST stable range as minor response [-15% to +10%]. [ABSTRACT FROM AUTHOR]

The purpose was to evaluate ex-vivo a prototype of a novel biopsy canula under CT fluoroscopy-guidance in ventilated porcine lung explants in respiratory motion simulations. Using an established chest phantom for porcine lung explants, n = 24 artificial lesions consisting of a fat-wax-Lipiodol mixture (approx. 70HU) were placed adjacent to sensible structures such as aorta, pericardium, diaphragm, bronchus and pulmonary artery. A piston pump connected to a reservoir beneath a flexible silicone reconstruction of a diaphragm simulated respiratory motion by rhythmic inflation and deflation of 1.5 L water. As biopsy device an 18-gauge prototype biopsy canula with a lancet-like, helically bended cutting edge was used. The artificial lesions were punctured under CT fluoroscopy-guidance (SOMATOM Sensation 64, Siemens, Erlangen, Germany; 30mAs/120 kV/5 mm slice thickness) implementing a dedicated protocol for CT fluoroscopy-guided lung biopsy. The mean-diameter of the artificial lesions was 8.3 +/- 2.6 mm, and the mean-distance of the phantom wall to the lesions was 54.1 +/- 13.5 mm. The mean-displacement of the lesions by respiratory motion was 14.1 +/- 4.0 mm. The mean-duration of CT fluoroscopy was 9.6 +/- 5.1 s. On a 4-point scale (1 = central; 2 = peripheral; 3 = marginal; 4 = off target), the mean-targeted precision was 1.9 +/- 0.9. No misplacement of the biopsy canula affecting adjacent structures could be detected. The novel steerable biopsy canula proved to be efficient in the ex-vivo set-up. The chest phantom enabling respiratory motion and the steerable biopsy canula offer a feasible ex-vivo system for evaluating and training CT fluoroscopy-guided lung biopsy adapted to respiratory motion. [ABSTRACT FROM AUTHOR]

This paper assesses the impact of the length of maternity leave on children's health outcomes in the long-run. My quasi-experimental design evaluates an expansion in maternity leave coverage from two to six months, which occurred in the Federal Republic of Germany in 1979. The expansion came into effect after a sharp cutoff date and significantly increased the time working mothers stayed at home with their newborns during the first six months after childbirth. Using this cutoff date as a source of exogenous variation, I exploit German hospital registry data, which contains detailed information on the universe of inpatients' diagnoses from 1995-2014. By tracking the health of treated and control children from age 16 up to age 35, this study provides new insights into the trajectory of health differentials over the life-cycle. I find that the legislative change generated positive long-term health effects: My intention-to-treat estimates show that children born after the implementation of the reform experience fewer hospital admissions and are less likely to be diagnosed with mental and behavioral disorders., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Purpose: Comparison of manual one-/bi-dimensional measurements versus semi-automatically derived one-/bi-dimensional and volumetric measurements for therapy response evaluation of malignant lymphoma during CT follow-up examinations in a multicenter setting., Materials and Methods: MSCT data sets of patients with malignant lymphoma were evaluated before (baseline) and after two cycles of chemotherapy (follow-up) at radiological centers of five university hospitals. The long axis diameter (LAD), the short axis diameter (SAD) and the bi-dimensional WHO of 307 target lymph nodes were measured manually and semi-automatically using dedicated software. Lymph node volumetry was performed semi-automatically only. The therapeutic response was evaluated according to lymphoma-adapted RECIST., Results: Based on a single lymph node, semi-automatically derived multidimensional parameters allowed for significantly more accurate therapy response classification than the manual or the semi-automatic unidimensional parameters. Incorrect classifications were reduced by up to 9.6%. Compared to the manual approach, the influence of the study center on correct therapy classification is significantly less relevant when using semi-automatic measurements., Conclusion: Semi-automatic volumetry and bi-dimensional WHO significantly reduce the number of incorrectly classified lymphoma patients by approximately 9.6% in the multicenter setting in comparison to linear parameters. Semi-automatic quantitative software tools may help to significantly reduce wrong classifications that are associated with the manual assessment approach., Key Points: ► Semi-automatic volumetry and bi-dimensional WHO significantly reduce the number of incorrectly classified lymphoma patients ► Manual lymph node evaluation with uni-dimensional parameters is inferior to semi-automatic analysis in a multicenter setting ► Semi-automatic quantitative software tools should be introduced in clinical study evaluation., (© Georg Thieme Verlag KG Stuttgart · New York.)

Purpose: To investigate measurement accuracy in terms of precision and inter-rater variability in the simultaneous volumetric assessment of lung, liver and lymph node metastasis size change over time in comparison to RECIST 1.1., Materials and Methods: Three independent readers evaluated multislice CT data from clinical follow-up studies (chest/abdomen) in 50 patients with metastases. A total of 117 lung, 77 liver and 97 lymph node metastases were assessed manually (RECIST 1.1) and by volumetry with semi-automated software. The quality of segmentation and need for manual adjustments were recorded. Volumes were converted to effective diameters to allow comparison to RECIST. For statistical assessment of precision and interobserver agreement, the Wilcoxon-signed rank test and Bland-Altman plots were utilized., Results: The quality of segmentation after manual correction was acceptable to excellent in 95 % of lesions and manual corrections were applied in 21 - 36 % of all lesions, most predominantly in lymph nodes. Mean precision was 2.6 - 6.3 % (manual) with 0.2 - 1.5 % (effective) relative measurement deviation (p <.001). Inter-reader median variation coefficients ranged from 9.4 - 12.8 % (manual) and 2.9 - 8.2 % (volumetric) for different lesion types (p < .001). The limits of agreement were ± 9.8 to ± 11.2 % for volumetric assessment., Conclusion: Superior precision and inter-rater variability of volumetric over manual measurement of lesion change over time was demonstrated in a whole body setting., (© Georg Thieme Verlag KG Stuttgart · New York.)

Radiotherapy for organs with respiratory motion has motivated the development of dynamic volume lung imaging with computed tomography (4D-CT) or magnetic resonance imaging (4D-MRI). 4D-CT can be realized in helical (continuous couch translation during image acquisition) or cine mode (translation step-by-step), either acquired prospectively or reconstructed retrospectively with temporal resolutions of up to 250 msec. Long exposure times result in high radiation dose and restrict 4D-CT to specific indications (ie, radiotherapy planning). Dynamic MRI accelerated by parallel imaging and echo sharing reaches temporal resolutions of up to 10 images/sec (2D+t) or 1 volume/s (3D+t) that allow analyzing respiratory motion of the lung and its tumors. Near isotropic 4D-MRI can be used to assess tumor displacement, chest wall invasion, and segmental respiratory mechanics. Limited temporal resolution of dynamic volume acquisitions (in their current implementation) may lead to an overestimation of tumor size, as the mass is volume averaged into many voxels during motion. Nevertheless, 4D-MRI allows for repeated and prolonged measurements without radiation exposure and therefore appears to be appropriate for patient selection in motion-adapted radiotherapy as well as for a broad spectrum of scientific applications., (Copyright © 2010 Wiley-Liss, Inc.)

Orbital floor fractures, often combined with zygomatic fractures, are common fractures of the midface. Surgery of orbital fractures is done to free incarcerated or prolapsed orbital tissue and to restore the anatomic skeletal size of the orbit. Lyodura was a standard for the reconstruction of the orbital floor until cases of Creutzfeldt-Jakob disease were reported, so that polydioxanone (PDS) is widely used today. However, infections around the implant are reported. In a randomized controlled clinical study on 24 patients with orbital floor defects of approximately 1 cm, we evaluated the use of a collagen membrane compared with a PDS foil. Computed tomography controls and ophthalmologic examinations were performed after 6 months in 10 patients per group.Intraoperative complications occurred neither in the collagen membrane group nor in the PDS group. In case of orbital rim fractures, the collagen membrane could additionally cover these defects. Perioperatively and postoperatively, no complications such as infections were observed. After 6 months, computed tomography controls revealed a complete reposition of orbital tissue and even bone regeneration in both groups. Diplopia and hypoesthesia were completely reversed after half a year.Smaller defects (up to 1 cm) of the orbital floor can be restored with a PDS foil or a collagen membrane. However, for larger defects, stability may not be sufficient.

Purpose: To compare the reproducibility (r) of CT value measurement of pulmonary nodules using volumetry software (LungCare, LC) and manual ROIs (mROI)., Materials and Methods: 54 artificial nodules in a chest phantom were scanned three times with CT. CT values were measured with LC and mROI. The intrascan-r was assessed with three measurements in the first scan, and the interscan-r with measurements in three consecutive scans (one observer). Intrascan-r und interobserver-r (two obs.) were assessed in the first scan and in contrast-enhanced CT of 51 nodules from 15 patients (kernels b50f and b80f). Intrascan-r and interscan-r were described as the mean range and interobserver-r as the mean difference of CT values. The significance of differences was tested using t-test and sign test., Results: Reproducibility was significantly higher for volumetry-based measurements in both artificial and patient nodules (range 0.11 vs. 6.16 HU for intrascan-r, 2.22 vs. 7.03 HU for interscan-r, difference 0.11 vs. 18.42 HU for interobserver-r; patients: 1.78 vs. 13.19 HU (b50f-Kernel) and 1.88 vs. 27.4 HU (b80f-Kernel) for intrascan-r, 3.71 vs. 22.43 HU for interobserver-r). Absolute CT values differed significantly between convolution kernels (pat./mROI: 29.3 [b50f] and 151.9 HU [b80f] pat./LC: 5 [b50f] and 147 HU [b80f])., Conclusion: The reproducibility of volumetry-based measurements of CT values in pulmonary nodules is significantly higher and should therefore be recommended, e. g. in dynamic chest CT protocols. Reproducibility does not depend on absolute CT values.