Search

The objective of this paper was to study the sCO2 cycle as a waste heat recovery system for a 180 kW biogas engine. The research methodology adopted was numerical simulations through two models built in different programs: Aspen HYSYS and GT Suite. The models were used to optimize the design and thermodynamic parameters of a CO2 cycle in terms of system power, system efficiency, expander, and compressor efficiency. Depending on the objective function, the sCO2 cycle could provide additional power ranging from 27.9 to 11.3 kW. Based on the calculation performed, "Recuperated cycle at maximum power" was selected for further investigation. The off-design analysis of the system revealed the optimum operating point. The authors designed the preliminary dimensions of the turbomachinery, i.e., the rotor dimension is 16 mm, which will rotate at 100,000 rpm. [ABSTRACT FROM AUTHOR]

This article deals with a thermal energy storage system in the form of a water tank with a thermocline. The well-known thermocline phenomenon is modeled using computational fluid dynamics (CFD). However, the reservoir model proposed in this article is zero-dimensional. This is due to the fact that the aim of this article is to build a mathematical model that will be more useful in mathematical models of complex energy systems in which a hot water tank is one of many elements of the system. In such a zero-dimensional mathematical model, the hot water tank will be modeled using equations describing heat transfer, and the thermocline itself will be treated as a heat transfer surface with known dimensions and heat transfer coefficient. A novelty of this paper is that it addresses heat loss across the thermocline as defined in this manner. A CFD model of a thermal storage tank is created, validated with available experimental data, and used to obtain the heat transfer coefficient U. The resulting value is then analyzed quantitatively and qualitatively and the changes in the thickness of the thermocline are accounted for in the equation. The results from this groundbreaking work can be used to analyze heat storage in the form of thermocline water tanks at the level of system modeling, e.g., for the purpose of configuring the structure of other devices and control systems. [ABSTRACT FROM AUTHOR]

This paper presents models of three elements: heat exchanger, compressor and expander dedicated to supercritical CO2 cycles (Brayton). The models are built using Ebsilon software and validated against experimental data from available literature. Radial turbomachinery and thin plate heat exchangers were used to meet the demands of the relatively compact design of the S-CO2 cycle elements. It seems that there are no general relationships for the turbomachinery and real characteristics need to be used for constructing the models. [ABSTRACT FROM AUTHOR]

The paper presents an investigation into the three cathode layers for the Molten Carbonate Fuel Cell that were obtained by using printing techniques on various surfaces. The main differences during the manufacturing process were the substrates used when printing the layers: glass and two different sorts of paper. The cathodes were investigated at the theoretical and experimental level. To identify the influence of the substrate used we built a mathematical model of the fuel cell, in which the influence is expressed by the conductivity of the layer. The paper demonstrates the possibility of using printing techniques to manufacture Molten Carbonate Fuel Cell layers. [ABSTRACT FROM AUTHOR]

Molten Carbonate Fuel Cells (MCFC) offer several advantages that are accelerating the research and development effort. Recent advances include improved materials, new fabrication techniques and new designs, flow configurations and applications. Nevertheless, several factors are holding back large scale implementation of fuel cells, especially in distributed energy generation, a major one being their long response time to changing parameters. Whereas alternative mathematical models of the molten carbonate fuel cell stack have been developed over the last decade, there are no reported analyses of regarding the application of models for emergency scenarios such as fuel cell malfunctions. This paper presents the 0D model of MCFC, calibrated to the appropriate available experimental data. This study investigates a generic molten fuel cell stack with nominal power output of 1 kWel. As daily, weekly and monthly variations in the electrical power load are expected, there is a need to develop numerical tools to predict the unit's performance with high accuracy. Hence, a fully physical dynamic model of an MCFC stack was developed and implemented in Aspen HYSYS 10 modeling software to enable predictive analysis of the dynamic response. The model is used to simulate a number of few malfunctions with 5. 66% broken cells in the stack. Losses of performance are obtained, manifested by rising operating temperature and falling power output. Moreover, a number of emergency operation scenarios were investigated, such as sudden loss of electric load, fuel and oxidiant supply. The presented model exhibits high accuracy and accounts for thermal and electrochemical processes and parameters. The paper presents the methodology used in the study to analyze the sensitivity of key scenarios such as load changes and emergencies. Further functionality of the model, which was validated using real operating data, is discussed. • Dynamic model of a Molten Carbonate Fuel Cell 1 kW stackis proposed. • The model was calibrated to the appropriate available experimental data. • The load changes and emergency situations were examined. [ABSTRACT FROM AUTHOR]