Search

Inline measurement of biofilms could provide a valuable technology for water, food and bioprocessing industries to improve quality control and avoid contamination. This study presents the first use of electrical resistance tomography (ERT) to detect the removal of biofilms in a pipe. It also tests the effectiveness of sophorolipids and rhamnolipids for the disruption of Bacillus subtilis BBK006 biofilms in an industrial setting. Biofilms were grown on the inner side of a section of 1.5" test pipe for 5 days using nutrient broth as the culture medium. After the medium was removed the test pipe was incorporated into a cleaning test circuit for the biofilm disruption experiment, where water, sophorolipids (0.4 g L-1) or rhamnolipids (0.4 g L-1) solutions were pumped through respectively for 30 min. ERT was used as an indirect evaluation of the film disruption progression. A cleaning parameter was identified based on zonal boundary averages which successfully measured the extent of biofilm removal. [ABSTRACT FROM AUTHOR]

Abstract: Radiello®, a radial symmetry diffusive sampler, has been evaluated for its potential for ambient air quality monitoring, in particular for benzene, toluene, ethyl benzene, p-xylene, m-xylene, o-xylene (BTEX) measurements. BTEX were first sampled onto adsorbing cartridges before analyses were performed by thermal desorption and GC-MS. Tests were carried out to determine blank values and any storage effects. The results of an investigation into repeatability of the Radiello® sampler and the influence of sampling time under field conditions are reported. Inter-comparison with automatic instruments is also illustrated. [Copyright &y& Elsevier]

Data about biosimilar Peg-filgrastim (bioPEG) in autologous stem cell transplant (ASCT) are still scarce. The aim of this study has been to assess efficacy and safety of bioPEG among lymphoma and myeloma patients undergoing ASCT, comparing these data with historical controls receiving other G-CSFs. Furthermore, an economic evaluation has been included to estimate the savings by using bioPEG. This is a prospective cohort study comparing lymphoma and myeloma patients undergoing ASCT and receiving bioPEG (n = 73) with three historical consecutive cohorts collected retrospectively who received other G-CSFs (Lenograstim - Leno - n = 101, biosimilar Filgrastim - bioFIL n = 392, and originator Peg-filgrastim - oriPEG n = 60). We observed a significantly shorter time to neutrophils and platelet engraftment (p < 0.001) in patients treated with bioPEG and oriPEG. Moreover, patients who received bioPEG showed a shorter hospitalization time (p < 0.001) and a lower transfusion need (p < 0.001). We did not observe any significant difference in terms of transplant-related mortality, mucositis, and diarrhea among the four groups. No serious adverse events were associated with bioPEG. Similar data were obtained after running a stratified analysis for lymphomas and myeloma separately conducted by using a propensity score matching. The average total cost per patient of bioPEG was € 18218.9 compared to € 23707.8, € 20677.3 and € 19754.9 of Leno, oriPEG, and bioFIL, respectively. In conclusion, bioPEG seems to be as effective as the originator and more effective than short-acting G-CSFs in terms of post-transplant engraftment in myeloma and lymphoma patients undergoing ASCT. Moreover, bioPEG was cost-effective when compared with the other G-CSFs., (© 2024. The Author(s).)

A convalescent, non-severe, patient with COVID-19 was enrolled as a hyper-immune plasma voluntary donor by the Immuno-Hematology and Transfusion Unit of the Regina Elena National Cancer Institute in Rome, under the TSUNAMI national study criteria. During a nearly 6-month period (May-October 2020), the patient was closely monitored and underwent four hyperimmune plasma collections. Serum SARS-CoV-2 (anti-S + anti-N) IgG and IgM, anti-S1 IgA, and neutralizing titers (NTs) were measured. Anti-SARS-CoV-2 antibody levels steadily decreased. No correlation was found between anti-S/anti-N IgG and IgM levels and viral NT, measured by either a microneutralization test or the surrogate RBD/ACE2-binding inhibition test. Conversely, NTs directly correlated with anti-S1 IgA levels. Hyperimmune donor plasma, administered to five SARS-CoV-2 patients with persistent, severe COVID-19 symptoms, induced short-term clinical and pathological improvement. Reported data suggest that high NTs can persist longer than expected, thus widening hyperimmune plasma source, availability, and potential use. In vitro RBD/ACE2-binding inhibition test is confirmed as a convenient surrogate index for neutralizing activity and patients' follow-up, suitable for clinical settings where biosafety level 3 facilities are not available. IgA levels may correlate with serum neutralizing activity and represent a further independent index for patient evaluation., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2021 De Rienzo, Foddai, Conti, Mandoj, Iaboni, Saladini, Castilletti, Matusali, Donno, Marchioni, Ianniello, Corpolongo, Palange, Ciliberto, Piaggio and De Marco.)

Recent medical strategies rely on the search for effective antimicrobials as surface coatings to prevent and treat infections in humans and animals. Biosurfactants have recently been shown to have properties as antiadhesive and antibiofilm agents. Sophorolipids in particular are biosurfactant molecules known to act as therapeutic agents. This study aimed to evaluate antimicrobial properties of sophorolipids in medical-grade silicone discs using strains of clinical relevance. Sophorolipids were produced under fed batch conditions, ESI-MS analyses were carried out to confirm the congeners present in each formulation. Three different products were obtained SLA (acidic congeners), SL18 (lactonic congeners) and SLV (mixture of acidic and lactonic congeners) and were tested against Staphylococcus aureus ATCC 6538, Pseudomonas aeruginosa ATCC 10145 and Candida albicans IHEM 2894. All three congener mixtures showed a biofilms disruption effect (> 0.1 % w/v) of 70 %, 75 % and 80 % for S. aureus, P. aeruginosa and C. albicans, respectively. On pre-coated silicone discs, biofilm formation of S. aureus was reduced by 75 % using SLA 0.8 % w/v. After 1.5 h the inhibition of C. albicans attachment was between 45-56 % whilst after 24 h incubation the percentage of inhibition for the cell attachment increased to 68-70 % when using SLA 0.8 % w/v. Finally, in co-incubation experiments SLA 0.05 % w/v significantly reduced the ability of S. aureus and C. albicans to form biofilms and to adhere to surfaces by 90-95 % at concentrations between 0.025-0.1 % w/v. In conclusion sophorolipids significantly reduced the cell attachment of both tested strains which suggests that these molecules could have a potential role as coating agents on medical grade silicone devices for the preventions of Gram positive bacteria and yeast infections., Competing Interests: Declaration of Competing Interest None., (Copyright © 2020 Elsevier B.V. All rights reserved.)

This paper reviews the transformation processes that polycyclic aromatic hydrocarbons (PAHs) undergo in the atmosphere. These processes can take place both in the gas phase and in the particulate/aerosol one. Among the gas-phase processes, the most important ones are the daytime reaction with *OH and the nighttime reaction with *NO3. The relative importance of the two processes depends on the particular PAH molecule. For instance, gaseous naphthalene is mainly removed from the atmosphere upon reaction with *OH, while gaseous phenanthrene is mainly removed by reaction with *NO3. Oxy-, hydroxy-, and nitro-PAHs are the main transformation intermediates. Reaction with ozone and photolysis play a secondary role in the transformation of gaseous PAHs. The particle-associated processes are usually slower than the gas-phase ones, thus the gas-phase PAHs usually have shorter atmospheric lifetimes than those found on particulate. Due to the higher residence time on particulate when compared with the gas phase, direct or assisted photolysis plays a relevant role in the transformation of particle-associated PAHs. Among the other processes taking place in the condensed phase, nitration plays a very important role due to the health impact of nitro-PAHs, some of them being the most powerful mutagens found so far in atmospheric particulate extracts.

This is the first of a series of two papers intended to review the state-of-the-art knowledge on atmospheric PAHs, concerning their monitoring, sources and transformation processes in the atmosphere. The monitoring section briefly introduces this class of compounds, mainly focusing on the 16 PAHs indicated by the US-EPA as priority pollutants. These compounds undergo partitioning between the gas phase and particulate, which has to be considered in the choice of the sampling methodology. Furthermore, sampling artifacts may arise from further phase transfers inside the sampling device. After sampling, extraction, clean up and detection/quantification procedures will follow. They are closely related since the choice of the extraction technique will heavily condition the clean-up step, and both procedures will place demands on the performance of the detection technique (usually GC-MS or HPLC). This is particularly true in the case of complex samples such as those arising from atmospheric sampling. The sources of atmospheric PAHs are then discussed with a particular focus on receptor models, which can allow the apportionment of PAH sources based on concentration data that can be routinely obtained by pollution control networks.

In this paper an application of new procedures for atmospheric particulate analysis is illustrated. PM10, PAHs (benzo[a]anthracene (BaA), benzo[b]fluoranthene (BbF), benzo[j]fluoranthene (BjF), benzo[k]fluoranthene (BkF), benzo[a]pyrene (BaP), indeno[1, 2, 3-cd]pyrene (Ip), dibenzo[a, h]anthracene (DbA)) and heavy metals (Cu, Ni, Zn, Co, Mn, Cd, Fe and Pb) were investigated. PM10 determination was performed by gravimetric method, PAHs were measured by GC-MS, and heavy metals by HPIC. An air quality monitoring campaign on the territory of Bari municipality has been organised, and its results are shown.

We report a rare case of a patient with multiple myeloma who developed hyperamylasemia not associated to hyperamylasuria and without symptoms of pancreatic or salivary disease. This condition suggested the occurrence of macroamylasemia, consisting of macromolecules of amylase bound with immunoglobulins, which are not filtered by the kidneys. Hyperamylasemia was not present at the diagnosis of myeloma and appeared at the relapse of the disease, simultaneously with the appearance of an additional gamma-chain oligoclonal component, suggesting a possible role of these chains in producing macroamylasemia. To our knowledge, this is the first report of macroamylasemia in a patient with multiple myeloma.

In this paper, improvements obtained by using focused microwaves for extraction, in the analysis of polycyclic aromatic hydrocarbons (PAHs) adsorbed on particulate matter, are discussed. The method was tested on the following PAHs, which are considered to be among the most harmful with regard to carcinogenicity: benzo[a]anthracene, benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, indeno[1,2,3-cd]pyrene, dibenzo[a,h]anthracene. The extraction of PAHs and concentration of the sample can be performed in 3 h with a recovery of at least 70% and a maximum standard deviation of 4%. These steps are followed by clean-up on a SPE (solid-phase extraction) cartridge and analysis by GC-MS. Real samples collected in the urban area of Bari were analysed according to the proposed procedure.