Search

The optoacoustic process can solve the longstanding challenge of wireless information transmission from an airborne unit to an underwater node (UWN). The nonlinear optoacoustic signal generated by proper laser parameters can propagate long distances in water. However, forming such a signal requires a high-power laser, and the buildup of a vapor cloud precludes the subsequent acoustic signal generation. Therefore, pursuing the traditional on-off keying (OOK) modulation technique will limit the data rate and power efficiency. In this paper, we analyze different modulation techniques and propose a vapor cloud delayed-differential pulse position modulation (VCD-DPPM) technique to improve the data rate and achieve high power efficiency for a single stationary laser transmitter. The symbol rate of VCD-DPPM is approximately 6.9 times and 1.69 times higher than OOK in our text communication simulation using a laser repetition rate of 10 kHz and 40 Hz, respectively. Furthermore, VCD-DPPM is 137% more power efficient than the OOK technique for both cases. We have generated different acoustic signal levels in laboratory conditions and simulated the bit error rate (BER) for different depths and positions of the UWN, while considering ambient underwater noises. Our results indicate that VCD-DPPM enables efficient data transmission., Comment: This paper is accepted in GLOBECOM 2022 - IEEE Global Communications Conference, Rio de Janeiro, Brazil

Localization of underwater networks is important in many military and civil applications. Because GPS receivers do not work below the water surface, traditional localization methods form a relative topology of underwater nodes (UWNs) and utilize either anchor nodes or floating gateways with dual transceivers in order to determine global coordinates. However, these methods introduce logistical complications and security risks in deploying the anchor and/or surface gateways. This paper tackles such an issue by proposing new localization techniques which can remotely localize UWNs using optoacoustic signals. In our approach, GPS coordinates are transmitted from air to the UWN via creating an underwater temporary isotropic acoustic transmitter with the optoacoustic process. We analyze the process of controlling the shape and size of the plasma to create the isotropic acoustic transmitter and experimentally validate the generation of isotropic acoustic signals. Then two methods of localization are proposed for static and dynamic UWNs. Finally, the simulation results with experimental values show the effectiveness of our approach. Comparing to the traditional techniques, our approach achieves the same accuracy without using any surface or underwater anchor nodes., Comment: 6 pages, 12 figures, to be published in ICC 2022 - IEEE International Conference on Communications, Seoul, South Korea, 2022

Recent studies on multinary oxides for applications as laser hosts and high dielectric capacitors have shown that processing at high temperature provides glassy or crystalline materials based on thermal treatments and cooling rates. Since hydroxyapatites are now subject of great interests due to their bioactivity, interest in producing soft and hard materials with glassy and crystalline nature by processing parameters has become very important. Crystalline materials by using Bridgman, Czochralski and flux growth methods are costly and require huge investment. We have observed that even low temperature solidification in organic flux produced oriented fibers. This organic treated material has different characteristics than in situ oxide materials prepared by sintering and grain growth. Examples of phosphate and silicate-based systems will be presented to demonstrate soft and hard materials. Effect of TiO2 and other hardening elements will be also reported.

There is a strong need for rad hard and high operating temperature IR detectors for space environment. Heavy metal Selenides (high Z and large density) have been investigated for more than half century for high operating temperature mid wave infrared (MWIR) applications. Most of the efforts have been devoted to make detector arrays on high-resistivity Si substrates for operating wavelengths in the 1.5 to 5.0 m region using physical vapor transport grown poly crystalline materials. For most of the biological spectral and imaging applications, short wave infrared (SWIR) detectors have shown better performance. Recent growth materials have shown variation in morphology with slight change in growth conditions and hence variation in performance parameters such as bandgap, mobility and resistivity from sample to sample. We have performed growth and optical characterization of binary materials CdSe-PbSe to determine the suitability for IR detector. We have determined bandgap using several theoretical models for different morphologies observed during growth on silicon wafers.

There are several mechanisms which have been proposed for the existence of colossal dielectric constant in the class of perovskite calcium copper titanate (CaCu3Ti4O12 or CCTO) materials. Researches indicate that existence of twinning parallel to (100) (001) and (010) planes causes planar defects and causes changes in local electronic structure. This change can cause insulating barriers locally which contribute to the large dielectric values irrespective of processing. The combination of insulating barriers, defects and displacements caused by twinning have been attributed to the generation of large dielectric constant in CCTO. To examine some of these arguments some researchers replaced Ca with other elements and evaluated this concept. In this study we present the synthesis and characterization of Ga2/3Cu3Ti4O12-xNx (GCTON) material. This provides both distortion due to atomic size difference and defects due to insertion of nitrogen. The morphology of the compound was determined to show that processing has tremendous effect on the dielectric values. The resistivity of GCTON was several order higher than CCTO and dielectric constant was higher than 10,000.