Search

The study aimed to assess the effect of different front crawl stroke rates (SRs) in the oxygen uptake (̇VO2) kinetics and ̇VO2 peak, the total time to exhaustion (TTE), and blood lactate concentration ([La]) at 95% of the 400-m front crawl test (T400) mean speed (S400). Twelve endurance swimmers performed a T400 and four trials at 95% of the S400: (i) free SR, (ii) fixed SR (100% of the average free SR trial), (iii) reduced SR (90% of the average free SR trial), and (iv) increased SR (110% of the average free SR trial). ̇VO2 was accessed continuously with breath-by-breath analysis. The results highlighted: (i) the time constant at increased SR (13.3±4.2 s) was lower than in the reduced SR condition (19.5±2.6 s); (ii) the amplitude of the primary phase of ̇VO2 kinetics in the fixed SR (44.0±5.8 ml·kg-1·min-1) was higher than in the increased SR condition (39.5±6.4 ml·kg-1·min-1); and (iii) TTE was lower in the fixed SR (396.1±189.7 s) than the increased SR condition (743.0±340.0 s). The results indicate that controlled SR could be considered a swimming training strategy, focusing on physiological parameters overload.

Rossato, M, Dellagrana, RA, Sakugawa, RL, Lazzari, CD, Baroni, BM, and Diefenthaeler, F. Time response of photobiomodulation therapy on muscular fatigue in humans. J Strength Cond Res 32(11): 3285-3293, 2018-The aim of this study was to identify the effects of 2 different time responses on fatigue of knee extensor. Sixteen male volunteers (26 ± 6.0 years, 81 ± 12 kg, and 181 ± 7.4 cm) participated in the study. Participants performed the same protocol in 5 sessions {control, placebo (placebo applied both 6 hours before and immediately before the test), 6 hours before + immediately before (photobiomodulation therapy [PBMT] applied both 6 hours before and immediately before the test), 6 hours before (PBMT applied 6 hours before and placebo applied immediately before the test), and immediately before (placebo applied 6 hours before and PBMT applied immediately before the test)}. Photobiomodulation therapy was applied on knee extensor (9 sites; 30 J per site). Maximal isometric voluntary contraction (MIVC) was assessed before and after an isokinetic fatigue (45 flexion-extension concentric at 180°·s), associated with electromyography (root mean square [RMS] and median of frequency [MF]). For MIVC, there was no treatment × time interaction for all variables. Time effect was observed for peak torque (PT), RMS, and MF. Treatment effect was verified for PT, and 6 hours before + immediately before condition presented higher PT during MIVCpre than control (p = 0.004) and placebo (p = 0.044). The immediately before presented higher PT values than control (p = 0.047). Regarding MIVCpost, the PT for 6 hours before + immediately before presented higher values than control (p = 0.001) and placebo (p = 0.004). Peak torque during MIVC (pre to post) was reduced in 6 hours before + immediately before treatment (26%) compared with control (33%), placebo (29%), and immediately before (32%). The application of PBMT 6 hours + immediately before and immediately before exercise protocol is able to reduce the fatigue.

Cycling ergometer protocols are commonly integrated with a virtual reality environment (VRE), especially because of its static position that also allows multiple exercise experiments. Concerning VRE scenarios, visually delayed situations like the ones produced at excessive low update rates can also affect the sense of presence and physiological responses. However, the main interface between the subject and a cycling VRE is the power applied over the crank, and there are only a few experiments to evaluate the effect of delayed situations on this particular interface. Thus, this work aims to investigate the effects of the power update rate (PUR) over the subject`s performance on an avatar-based simulator during a drafting task. A custom cycling VRE was built, and 21 male recreational cyclists (175.9 ± 7.5 cm; 76.5 ± 13.9 kg) were tested at six different PUR levels from 100 to 3000 ms. As a result, PUR affects performance scores (virtual distance, efficiency, and heart rate

Saddle height influences cycling performance and would be expected to influence cyclists physically, perceptually, and emotionally. We investigated how different saddle positions and cadences might affect cyclists’ torque, heart rate, rate of perceived exertion (RPE), and affective responses (Feeling scale). Nine male recreational cyclists underwent cycling sessions on different days under different conditions with a constant load. On Day 1, the saddle was at the reference position (109% of the distance from the pubic symphysis to the ground), and on Days 2 and 3, the saddle was in the “upward position” (reference + 2.5%) and “downward position” (reference − 2.5%) in random order. Each session lasted 30 minutes and was divided into three cadence-varied 10-minute stages without interruption: (a) freely chosen cadence (FCC), (b) FCC − 20%, and (c) FCC + 20%. We assessed all dependent measures at the end of each 10 minute stage. While there was no significant interaction (Saddle × Cadence) for any of the analyzed variables, torque values were higher at lower cadences in all saddle configurations, and the FCC + 20% cadence was associated with faster heart rate, higher RPE, and lower affect compared with FCC and FCC − 20% in all saddle positions. At all cadences, the saddle at “downward position” generated a higher RPE compared with “reference position” and “upward position.” The affective response was lower in the “downward position” compared with the “reference position.” Thus, while cyclists perceived the downward (versus reference) saddle position as greater exercise effort, they also associated it with unpleasant affect.

The purpose of this study was to verify the photobiomodulation therapy (PBMT) effects with different doses on neuromuscular economy during submaximal running tests. Eighteen male recreational runners participate in a randomized, double-blind, and placebo-controlled trial, which each participant was submitted to the same testing protocol in five conditions: control, placebo, and PBMT with doses of 15, 30, and 60 J per site (14 sites in each lower limb). The submaximal running was performed at 8 and 9 km h−1 during 5 min for each velocity. Muscle activation of the vastus lateralis (VL), vastus medialis (VM), rectus femoris (RF), biceps femoris (BF), and gastrocnemius lateralis (GL) was collected during the last minute of each running test. The root mean square (RMS) was normalized by maximal isometric voluntary contraction (MIVC) performed a priori in an isokinetic dynamometer. The RMS sum of all muscles (RMSLEG) was considered as main neuromuscular economy parameter. PBMT with doses of 15, 30, and 60 J per site [33 diodes = 5 lasers (850 nm), 12 LEDs (670 nm), 8 LEDs (880 nm), and 8 LEDs (950 nm)] or placebo applications occurred before running tests. For the statistical analysis, the effect size was calculated. Moreover, a qualitative inference was used to determine the magnitude of differences between groups. Peak torque and RMS during MIVCs showed small effect sizes. According to magnitude-based inference, PBMT with dose of 15 J per site showed possibly and likely beneficial effects on neuromuscular economy during running at 8 and 9 km h−1, respectively. On other hand, PBMT with doses of 30 and 60 J per site showed possible beneficial effects only during running at 9 km h−1. We concluded that PBMT improve neuromuscular economy and the best PBMT dose was 15 J per site (total dose of 420 J).

Some evidence supports that low-level laser therapy (LLLT) reduces neuromuscular fatigue, so incrementing sports performance. A previous randomized controlled trial of our group showed increased exercise tolerance in male competitive cyclists treated with three different LLLT doses (3, 6, and 9 J/diode; or 135, 270, and 405 J/thigh) before time-to-exhaustion cycling tests. Now, the present study was designed to evaluate the effects of these LLLT doses on the VO2 kinetics of athletes during cycling tests. Twenty male competitive cyclists (29 years) participated in a crossover, randomized, double-blind, and placebo-controlled trial. On the first day, the participants performed an incremental cycling test to exhaustion to determine maximal oxygen uptake (VO2MAX) and maximal power output (POMAX), as well as a familiarization with the time-to-exhaustion test. In the following days (2 to 5), all participants performed time-to-exhaustion tests at POMAX. Before the exhaustion test, different doses of LLLT (3, 6, and 9 J/diode; or 135, 270, and 405 J/thigh, respectively) or placebo were applied bilaterally to the quadriceps muscle. All exhaustion tests were monitored online by an open-circuit spirometry system in order to analyze the VO2 amplitude, VO2 delay time, time constant (tau), and O2 deficit. Tau and O2 deficit were decreased with LLLT applications compared to the placebo condition (p 0.05) were found between the experimental conditions for VO2 amplitude and VO2 delay time. In conclusion, LLLT decreases tau and O2 deficit during time-to-exhaustion tests in competitive cyclists, and these changes in VO2 kinetics response can be one of the possible mechanisms to explain the ergogenic effect induced by LLLT. info:eu-repo/semantics/publishedVersion

This report describes a new crankarm dynamometer designed to evaluate the strength produced by cyclists in real conditions. The dynamometer was designed to be fitted on a conventional crankset while data were transmitted via wireless communication channels available on a BluetoothTM module. Some 3D solid models were created in the SolidsWorks2010TM development environment to analyze the static and dynamic characteristics, by using the finite elements technique. Each crankset arm was used as a load cell based on strain gages configured as two Wheatstone bridges. The signals were conditioned on a printed circuit board attached directly to the structure. As a result, the load cell shows a maximum nonlinearity error between 2.1 % and 2.8 %. Some tests were performed on a cycling trainer, allowing to evaluate the system's functionality and to determine the involved forces in the crankset.