Search

Abstract Background Recombinant protein production is universally employed as a solution to obtain the milligram to gram quantities of a given protein required for applications as diverse as structural genomics and biopharmaceutical manufacture. Yeast is a well-established recombinant host cell for these purposes. In this study we wanted to investigate whether our respiratory Saccharomyces cerevisiae strain, TM6*, could be used to enhance the productivity of recombinant proteins over that obtained from corresponding wild type, respiro-fermentative strains when cultured under the same laboratory conditions. Results Here we demonstrate at least a doubling in productivity over wild-type strains for three recombinant membrane proteins and one recombinant soluble protein produced in TM6* cells. In all cases, this was attributed to the improved biomass properties of the strain. The yield profile across the growth curve was also more stable than in a wild-type strain, and was not further improved by lowering culture temperatures. This has the added benefit that improved yields can be attained rapidly at the yeast's optimal growth conditions. Importantly, improved productivity could not be reproduced in wild-type strains by culturing them under glucose fed-batch conditions: despite having achieved very similar biomass yields to those achieved by TM6* cultures, the total volumetric yields were not concomitantly increased. Furthermore, the productivity of TM6* was unaffected by growing cultures in the presence of ethanol. These findings support the unique properties of TM6* as a microbial cell factory. Conclusions The accumulation of biomass in yeast cell factories is not necessarily correlated with a proportional increase in the functional yield of the recombinant protein being produced. The respiratory S. cerevisiae strain reported here is therefore a useful addition to the matrix of production hosts currently available as its improved biomass properties do lead to increased volumetric yields without the need to resort to complex control or cultivation schemes. This is anticipated to be of particular value in the production of challenging targets such as membrane proteins.

Abstract Background The production of high yields of recombinant proteins is an enduring bottleneck in the post-genomic sciences that has yet to be addressed in a truly rational manner. Typically eukaryotic protein production experiments have relied on varying expression construct cassettes such as promoters and tags, or culture process parameters such as pH, temperature and aeration to enhance yields. These approaches require repeated rounds of trial-and-error optimization and cannot provide a mechanistic insight into the biology of recombinant protein production. We published an early transcriptome analysis that identified genes implicated in successful membrane protein production experiments in yeast. While there has been a subsequent explosion in such analyses in a range of production organisms, no one has yet exploited the genes identified. The aim of this study was to use the results of our previous comparative transcriptome analysis to engineer improved yeast strains and thereby gain an understanding of the mechanisms involved in high-yielding protein production hosts. Results We show that tuning BMS1 transcript levels in a doxycycline-dependent manner resulted in optimized yields of functional membrane and soluble protein targets. Online flow microcalorimetry demonstrated that there had been a substantial metabolic change to cells cultured under high-yielding conditions, and in particular that high yielding cells were more metabolically efficient. Polysome profiling showed that the key molecular event contributing to this metabolically efficient, high-yielding phenotype is a perturbation of the ratio of 60S to 40S ribosomal subunits from approximately 1:1 to 2:1, and correspondingly of 25S:18S ratios from 2:1 to 3:1. This result is consistent with the role of the gene product of BMS1 in ribosome biogenesis. Conclusion This work demonstrates the power of a rational approach to recombinant protein production by using the results of transcriptome analysis to engineer improved strains, thereby revealing the underlying biological events involved.

Abstract Background We previously described the first respiratory Saccharomyces cerevisiae strain, KOY.TM6*P, by integrating the gene encoding a chimeric hexose transporter, Tm6*, into the genome of an hxt null yeast. Subsequently we transferred this respiratory phenotype in the presence of up to 50 g/L glucose to a yeast strain, V5 hxt1-7Δ, in which only HXT1-7 had been deleted. In this study, we compared the transcriptome of the resultant strain, V5.TM6*P, with that of its wild-type parent, V5, at different glucose concentrations. Results cDNA array analyses revealed that alterations in gene expression that occur when transitioning from a respiro-fermentative (V5) to a respiratory (V5.TM6*P) strain, are very similar to those in cells undergoing a diauxic shift. We also undertook an analysis of transcription factor binding sites in our dataset by examining previously-published biological data for Hap4 (in complex with Hap2, 3, 5), Cat8 and Mig1, and used this in combination with verified binding consensus sequences to identify genes likely to be regulated by one or more of these. Of the induced genes in our dataset, 77% had binding sites for the Hap complex, with 72% having at least two. In addition, 13% were found to have a binding site for Cat8 and 21% had a binding site for Mig1. Unexpectedly, both the up- and down-regulation of many of the genes in our dataset had a clear glucose dependence in the parent V5 strain that was not present in V5.TM6*P. This indicates that the relief of glucose repression is already operable at much higher glucose concentrations than is widely accepted and suggests that glucose sensing might occur inside the cell. Conclusion Our dataset gives a remarkably complete view of the involvement of genes in the TCA cycle, glyoxylate cycle and respiratory chain in the expression of the phenotype of V5.TM6*P. Furthermore, 88% of the transcriptional response of the induced genes in our dataset can be related to the potential activities of just three proteins: Hap4, Cat8 and Mig1. Overall, our data support genetic remodelling in V5.TM6*P consistent with a respiratory metabolism which is insensitive to external glucose concentrations.

Background: We previously selected four strains of Saccharomyces cerevisiae for their ability to produce the aquaporin Fps1 in sufficient yield for further study. Yields from the yeast strains spt3Δ, srb5Δ, gcn5Δ and yTHCBMS1 (supplemented with 0.5 μg/mL doxycycline) that had been transformed with an expression plasmid containing 249 base pairs of 5' untranslated region (UTR) in addition to the primary FPS1 open reading frame (ORF) were 10-80 times higher than yields from wild-type cells expressing the same plasmid. One of the strains increased recombinant yields of the G protein-coupled receptor adenosine receptor 2a (A 2a R) and soluble green fluorescent protein (GFP). The specific molecular mechanisms underpinning a high-yielding Fps1 phenotype remained incompletely described., Results: Polysome profiling experiments were used to analyze the translational state of spt3Δ, srb5Δ, gcn5Δ and yTHCBMS1 (supplemented with 0.5 μg/mL doxycycline); all but gcn5Δ were found to exhibit a clear block in translation initiation. Four additional strains with known initiation blocks (rpl31aΔ, rpl22aΔ, ssf1Δ and nop1Δ) also improved the yield of recombinant Fps1 compared to wild-type. Expression of the eukaryotic transcriptional activator GCN4 was increased in spt3Δ, srb5Δ, gcn5Δ and yTHCBMS1 (supplemented with 0.5 μg/mL doxycycline); these four strains also exhibited constitutive phosphorylation of the eukaryotic initiation factor, eIF2α. Both responses are indicative of a constitutively-stressed phenotype. Investigation of the 5'UTR of FPS1 in the expression construct revealed two untranslated ORFs (uORF1 and uORF2) upstream of the primary ORF. Deletion of either uORF1 or uORF1 and uORF2 further improved recombinant yields in our four strains; the highest yields of the uORF deletions were obtained from wild-type cells. Frame-shifting the stop codon of the native uORF (uORF2) so that it extended into the FPS1 ORF did not substantially alter Fps1 yields in spt3Δ or wild-type cells, suggesting that high-yielding strains are able to bypass 5'uORFs in the FPS1 gene via leaky scanning, which is a known stress-response mechanism. Yields of recombinant A 2a R, GFP and horseradish peroxidase could be improved in one or more of the yeast strains suggesting that a stressed phenotype may also be important in high-yielding cell factories., Conclusions: Regulation of Fps1 levels in yeast by translational control may be functionally important; the presence of a native uORF (uORF2) may be required to maintain low levels of Fps1 under normal conditions, but higher levels as part of a stress response. Constitutively-stressed yeast strains may be useful high-yielding microbial cell factories for recombinant protein production.

Background: Two major hurdles for successful production of second-generation bioethanol are the presence of inhibitory compounds in lignocellulosic media, and the fact that Saccharomyces cerevisiae cannot naturally utilise pentoses. There are recombinant yeast strains that address both of these issues, but co-utilisation of glucose and xylose is still an issue that needs to be resolved. A non-recombinant way to increase yeast tolerance to hydrolysates is by encapsulation of the yeast. This can be explained by concentration gradients occuring in the cell pellet inside the capsule. In the current study, we hypothesised that encapsulation might also lead to improved simultaneous utilisation of hexoses and pentoses because of such sugar concentration gradients., Results: In silico simulations of encapsulated yeast showed that the presence of concentration gradients of inhibitors can explain the improved inhibitor tolerance of encapsulated yeast. Simulations also showed pronounced concentration gradients of sugars, which resulted in simultaneous xylose and glucose consumption and a steady state xylose consumption rate up to 220-fold higher than that found in suspension culture. To validate the results experimentally, a xylose-utilising S. cerevisiae strain, CEN.PK XXX, was constructed and encapsulated in semi-permeable alginate-chitosan liquid core gel capsules. In defined media, encapsulation not only increased the tolerance of the yeast to inhibitors, but also promoted simultaneous utilisation of glucose and xylose. Encapsulation of the yeast resulted in consumption of at least 50% more xylose compared with suspended cells over 96-hour fermentations in medium containing both sugars. The higher consumption of xylose led to final ethanol titres that were approximately 15% higher. In an inhibitory dilute acid spruce hydrolysate, freely suspended yeast cells consumed the sugars in a sequential manner after a long lag phase, whereas no lag phase was observed for the encapsulated yeast, and glucose, mannose, galactose and xylose were utilised in parallel from the beginning of the cultivation., Conclusions: Encapsulation of xylose-fermenting S. cerevisiae leads to improved simultaneous and efficient utilisation of several sugars, which are utilised sequentially by suspended cells. The greatest improvement is obtained in inhibitory media. These findings show that encapsulation is a promising option for production of second-generation bioethanol.

The transmembrane domain proteins of the claudin superfamily are the major structural components of cellular tight junctions. One family member, claudin-1, also associates with tetraspanin CD81 as part of a receptor complex that is essential for hepatitis C virus (HCV) infection of the liver. To understand the molecular basis of claudin-1/CD81 association we previously produced and purified milligram quantities of functional, full-length CD81, which binds a soluble form of HCV E2 glycoprotein (sE2). Here we report the production, purification and characterization of claudin-1. Both yeast membrane-bound and detergent-extracted, purified claudin-1 were antigenic and recognized by specific antibodies. Analytical ultracentrifugation demonstrated that extraction with n-octyl-β-d-glucopyranoside yielded monodispersed, dimeric pools of claudin-1 while extraction with profoldin-8 or n-decylphosphocholine yielded a dynamic mixture of claudin-1 oligomers. Neither form bound sE2 in line with literature expectations, while further functional analysis was hampered by the finding that incorporation of claudin-1 into proteoliposomes rendered them intractable to study. Dynamic light scattering demonstrated that claudin-1 oligomers associate with CD81 in vitro in a defined molar ratio of 1∶2 and that complex formation was enhanced by the presence of cholesteryl hemisuccinate. Attempts to assay the complex biologically were limited by our finding that claudin-1 affects the properties of proteoliposomes. We conclude that recombinant, correctly-folded, full-length claudin-1 can be produced in yeast membranes, that it can be extracted in different oligomeric forms that do not bind sE2 and that a dynamic preparation can form a specific complex with CD81 in vitro in the absence of any other cellular components. These findings pave the way for the structural characterization of claudin-1 alone and in complex with CD81.

Having access to suitably stable, functional recombinant protein samples underpins diverse academic and industrial research efforts to understand the workings of the cell in health and disease. Synthesising a protein in recombinant host cells typically allows the isolation of the pure protein in quantities much higher than those found in the protein's native source. Yeast is a popular host as it is a eukaryote with similar synthetic machinery to the native human source cells of many proteins of interest, while also being quick, easy, and cheap to grow and process. Even in these cells the production of some proteins can be plagued by low functional yields. We have identified molecular mechanisms and culture parameters underpinning high yields and have consolidated our findings to engineer improved yeast cell factories. In this chapter, we provide an overview of the opportunities available to improve yeast as a host system for recombinant protein production.

Membrane proteins are drug targets for a wide range of diseases. Having access to appropriate samples for further research underpins the pharmaceutical industry's strategy for developing new drugs. This is typically achieved by synthesizing a protein of interest in host cells that can be cultured on a large scale, allowing the isolation of the pure protein in quantities much higher than those found in the protein's native source. Yeast is a popular host as it is a eukaryote with similar synthetic machinery to that of the native human source cells of many proteins of interest, while also being quick, easy and cheap to grow and process. Even in these cells, the production of human membrane proteins can be plagued by low functional yields; we wish to understand why. We have identified molecular mechanisms and culture parameters underpinning high yields and have consolidated our findings to engineer improved yeast host strains. By relieving the bottlenecks to recombinant membrane protein production in yeast, we aim to contribute to the drug discovery pipeline, while providing insight into translational processes.

Tetraspanins are thought to exert their biological function(s) by co-ordinating the lateral movement and trafficking of associated molecules into tetraspanin-enriched microdomains. A second four-TM (transmembrane) domain protein family, the Claudin superfamily, is the major structural component of cellular TJs (tight junctions). Although the Claudin family displays low sequence homology and appears to be evolutionarily distinct from the tetraspanins, CD81 and Claudin-1 are critical molecules defining HCV (hepatitis C virus) entry; we recently demonstrated that CD81-Claudin-1 complexes have an essential role in this process. To understand the molecular basis of CD81-Claudin-1 complex formation, we produced and purified milligram quantities of full-length CD81 and Claudin-1, alone and in complex, in both detergent and lipid contexts. Structural characterization of these purified proteins will allow us to define the mechanism(s) underlying virus-cell interactions and aid the design of therapeutic agents targeting early steps in the viral life cycle.

The slow down in the drug discovery pipeline is, in part, owing to a lack of structural and functional information available for new drug targets. Membrane proteins, the targets of well over 50% of marketed pharmaceuticals, present a particular challenge. As they are not naturally abundant, they must be produced recombinantly for the structural biology that is a prerequisite to structure-based drug design. Unfortunately, however, obtaining high yields of functional, recombinant membrane proteins remains a major bottleneck in contemporary bioscience. While repeated rounds of trial-and-error optimization have not (and cannot) reveal mechanistic details of the biology of recombinant protein production, examination of the host response has provided new insights. To this end, we published an early transcriptome analysis that identified genes implicated in high-yielding yeast cell factories, which has enabled the engineering of improved production strains. These advances offer hope that the bottleneck of membrane protein production can be relieved rationally.

Proteorhodopsin is an integral membrane light-harvesting proton pump that is found in bacteria distributed throughout global surface waters. Here, we present a protocol for functional in vitro production of pR using a commercial cell-free synthesis system yielding 1.0mg purified protein per milliliter of cell lysate. We also present an optimized protocol for in vivo over-expression of pR in Escherichia coli, and a two-step purification yielding 5mg of essentially pure functional protein per liter of culture. Both approaches are straightforward, rapid, and easily scalable. Thus either may facilitate the exploitation of pR for commercial biotechnological applications. Finally, the implications of some observations of the in vitro synthesis behavior, as well as preliminary results towards a structural determination of pR are discussed.

Eukaryotic membrane proteins cannot be produced in a reliable manner for structural analysis. Consequently, researchers still rely on trial-and-error approaches, which most often yield insufficient amounts. This means that membrane protein production is recognized by biologists as the primary bottleneck in contemporary structural genomics programs. Here, we describe a study to examine the reasons for successes and failures in recombinant membrane protein production in yeast, at the level of the host cell, by systematically quantifying cultures in high-performance bioreactors under tightly-defined growth regimes. Our data show that the most rapid growth conditions of those chosen are not the optimal production conditions. Furthermore, the growth phase at which the cells are harvested is critical: We show that it is crucial to grow cells under tightly-controlled conditions and to harvest them prior to glucose exhaustion, just before the diauxic shift. The differences in membrane protein yields that we observe under different culture conditions are not reflected in corresponding changes in mRNA levels of FPS1, but rather can be related to the differential expression of genes involved in membrane protein secretion and yeast cellular physiology.

D-Tyr-tRNA(Tyr) deacylase is an editing enzyme that removes d-tyrosine and other d-amino acids from charged tRNAs, thereby preventing incorrect incorporation of d-amino acids into proteins. A model for the catalytic mechanism of this enzyme is proposed based on the crystal structure of the enzyme from Haemophilus influenzae determined at a 1.64-A resolution. Structural comparison of this dimeric enzyme with the very similar structure of the enzyme from Escherichia coli together with sequence analyses indicate that the active site is located in the dimer interface within a depression that includes an invariant threonine residue, Thr-80. The active site contains an oxyanion hole formed by the main chain nitrogen atoms of Thr-80 and Phe-79 and the side chain amide group of the invariant Gln-78. The Michaelis complex between the enzyme and D-Tyr-tRNA was modeled assuming a nucleophilic attack on the carbonyl carbon of D-Tyr by the Thr-80 O(gamma) atom and a role for the oxyanion hole in stabilizing the negatively charged tetrahedral transition states. The model is consistent with all of the available data on substrate specificity. Based on this model, we propose a substrate-assisted acylation/deacylation-catalytic mechanism in which the amino group of the D-Tyr is deprotonated and serves as the general base.

The crystal structures of YibK from Haemophilus influenzae (HI0766) have been determined with and without bound cofactor product S-adenosylhomocysteine (AdoHcy) at 1.7 and 2.0 A resolution, respectively. The molecule adopts an alpha/beta fold, with a topology that differs from that of the classical methyltransferases. Most notably, HI0766 contains a striking knot that forms the binding crevice for the cofactor. The knot formation is correlated with an alternative arrangement of the secondary structure units compared with the classical methyltransferases. Two loop regions undergo conformational changes upon AdoHcy binding. In contrast to the extended conformation of the cofactor seen in the classical methyltransferase structures, AdoHcy binds to HI0766 in a bent conformation. HI0766 and its close sequence relatives are all shorter versions of the more remotely related rRNA/tRNA methyltransferases of the spoU sequence family. We propose that the spoU sequence family contains the same core domain for cofactor binding as HI0766 but has an additional domain for substrate binding. The substrate-binding domain is absent in HI0766 sequence family and may be provided by another Haemophilus influenzae partner protein, which is yet to be identified., (Copyright 2003 Wiley-Liss, Inc.)

HI0719 belongs to a large family of highly conserved proteins with no definitive molecular function and is found in organisms ranging from bacteria to humans. We describe the NMR structure of HI0719, the first solution structure for a member of this family. The overall fold is similar to the crystal structures of two homologues, YabJ from Bacillus subtilis and YjgF from Escherichia coli, and all three structures are similar to that of chorismate mutase, although there is little sequence homology and no apparent functional connection. HI0719 is a homotrimer with a distinct cavity located at the subunit interface. Six of the seven invariant residues in the high identity group of proteins are located in this cavity, suggesting that this may be a binding site for small molecules. Using previously published observations about the biological role of HI0719 family members as a guide, over 100 naturally occurring small molecules or structural analogues were screened for ligand binding using NMR spectroscopy. The targeted screening approach identified six compounds that bind to HI0719 at the putative active site. Five of these compounds are either alpha-keto acids or alpha,beta-unsaturated acids, while the sixth compound is structurally similar. Previous studies have proposed that some HI0719 homologues may act on small molecules in the isoleucine biosynthetic path and, if this is correct, the ligand screening results presented here suggest that the interaction most likely occurs with 2-ketobutyrate and/or its unstable enamine precursor.

The three-dimensional structures of Haemophilus influenzae proteins whose biological functions are unknown are being determined as part of a structural genomics project to ask whether structural information can assist in assigning the functions of proteins. The structures of the hypothetical proteins are being used to guide further studies and narrow the field of such studies for ultimately determining protein function. An outline of the structural genomics methodological approach is provided along with summaries of a number of completed and in progress crystallographic and NMR structure determinations. With more than twenty-five structures determined at this point and with many more in various stages of completion, the results are encouraging in that some level of functional understanding can be deduced from experimentally solved structures. In addition to aiding in functional assignment, this effort is identifying a number of possible new targets for drug development.

A hypothetical protein encoded by the gene YjeE of Haemophilus influenzae was selected as part of a structural genomics project for X-ray analysis to assist with the functional assignment. The protein is considered essential to bacteria because the gene is present in virtually all bacterial genomes but not in those of archaea or eukaryotes. The amino acid sequence shows no homology to other proteins except for the presence of the Walker A motif G-X-X-X-X-G-K-T that indicates the possibility of a nucleotide-binding protein. The YjeE protein was cloned, expressed, and the crystal structure determined by the MAD method at 1.7-A resolution. The protein has a nucleotide-binding fold with a four-stranded parallel beta-sheet flanked by antiparallel beta-strands on each side. The topology of the beta-sheet is unique among P-loop proteins and has features of different families of enzymes. Crystallization of YjeE in the presence of ATP and Mg2+ resulted in the structure with ADP bound in the P-loop. The ATPase activity of YjeE was confirmed by kinetic measurements. The distribution of conserved residues suggests that the protein may work as a "molecular switch" triggered by ATP hydrolysis. The phylogenetic pattern of YjeE suggests its involvement in cell wall biosynthesis., (Copyright 2002 Wiley-Liss, Inc.)

Azurin is a cupredoxin, which functions as an electron carrier. Its fold is dominated by a beta-sheet structure. In the present study, azurin serves as a model system to investigate the importance of a conserved disulphide bond for protein stability and folding/unfolding. For this purpose, we have examined two azurin mutants, the single mutant Cys3Ser, which disrupts azurin's conserved disulphide bond, and the double mutant Cys3Ser/Ser100Pro, which contains an additional mutation at a site distant from the conserved disulphide. The crystal structure of the azurin double mutant has been determined to 1.8 A resolution(2), with a crystallographic R-factor of 17.5% (R(free)=20.8%). A comparison with the wild-type structure reveals that structural differences are limited to the sites of the mutations. Also, the rates of folding and unfolding as determined by CD and fluorescence spectroscopy are almost unchanged. The main difference to wild-type azurin is a destabilisation by approximately 20 kJ x mol(-1), constituting half the total folding energy of the wild-type protein. Thus, the disulphide bond constitutes a vital component in giving azurin its stable fold.

The crystal structure of YecO from Haemophilus influenzae (HI0319), a protein annotated in the sequence databases as hypothetical, and that has not been assigned a function, has been determined at 2.2-A resolution. The structure reveals a fold typical of S-adenosyl-L-methionine-dependent (AdoMet) methyltransferase enzymes. Moreover, a processed cofactor, S-adenosyl-L-homocysteine (AdoHcy), is bound to the enzyme, further confirming the biochemical function of HI0319 and its sequence family members. An active site arginine, shielded from bulk solvent, interacts with an anion, possibly a chloride ion, which in turn interacts with the sulfur atom of AdoHcy. The AdoHcy and nearby protein residues delineate a small solvent-excluded substrate binding cavity of 162 A(3) in volume. The environment surrounding the cavity indicates that the substrate molecule contains a hydrophobic moiety and an anionic group. Many of the residues that define the cavity are invariant in the HI0319 sequence family but are not conserved in other methyltransferases. Therefore, the substrate specificity of YecO enzymes is unique and differs from the substrate specificity of all other methyltransferases sequenced to date. Examination of the Enzyme Commission list of methyltransferases prompted a manual inspection of 10 possible substrates using computer graphics and suggested that the ortho-substituted benzoic acids fit best in the active site., (Copyright 2001 Wiley-Liss, Inc.)

Dephospho-coenzyme A kinase catalyzes the final step in CoA biosynthesis, the phosphorylation of the 3'-hydroxyl group of ribose using ATP as a phosphate donor. The protein from Haemophilus influenzae was cloned and expressed, and its crystal structure was determined at 2.0-A resolution in complex with ATP. The protein molecule consists of three domains: the canonical nucleotide-binding domain with a five-stranded parallel beta-sheet, the substrate-binding alpha-helical domain, and the lid domain formed by a pair of alpha-helices. The overall topology of the protein resembles the structures of nucleotide kinases. ATP binds in the P-loop in a manner observed in other kinases. The CoA-binding site is located at the interface of all three domains. The double-pocket structure of the substrate-binding site is unusual for nucleotide kinases. Amino acid residues implicated in substrate binding and catalysis have been identified. The structure analysis suggests large domain movements during the catalytic cycle., (C)2001 Elsevier Science (USA).)

Azurin has a beta-barrel fold comprising eight beta-strands and one alpha helix. A disulfide bond between residues 3 and 26 connects the N-termini of beta strands beta1 and beta3. Three mutant proteins lacking the disulfide bond were constructed, C3A/C26A, C3A/C26I and a putative salt bridge (SB) in the C3A/S25R/C26A/K27R mutant. All three mutants exhibit spectroscopic properties similar to the wild-type protein. Furthermore, the crystal structure of the C3A/C26A mutant was determined at 2.0 A resolution and, in comparison to the wild-type protein, the only differences are found in the immediate proximity of the mutation. The mutants lose the 628 nm charge-transfer band at a temperature 10-22 degrees C lower than the wild-type protein. The folding of the zinc loaded C3A/C26A mutant was studied by guanidine hydrochloride (GdnHCl) induced denaturation monitored both by fluorescence and CD spectroscopy. The midpoint in the folding equilibrium, at 1.3 M GdnHCl, was observed using both CD and fluorescence spectroscopy. The free energy of folding determined from CD is -24.9 kJ.mol-1, a destabilization of approximately 20 kJ.mol-1 compared to the wild-type Zn2+-protein carrying an intact disulfide bond, indicating that the disulfide bond is important for giving azurin its stable structure. The C3A/C26I mutant is more stable and the SB mutant is less stable than C3A/C26A, both in terms of folding energy and thermal denaturation. The folding intermediate of the wild-type Zn2+-azurin is not observed for the disulfide-deficient C3A/C26A mutant. The rate of unfolding for the C3A/C26A mutant is similar to that of the wild-type protein, suggesting that the site of the mutation is not involved in an early unfolding reaction.

We have optimised the overexpression and purification of the N-terminal end of the Menkes disease protein expressed in Escherichia coli, containing one, two and six metal binding domains (MBD), respectively. The domain(s) have been characterised using circular dichroism (CD) and fluorescence spectroscopy, and their copper(I) binding properties have been determined. Structure prediction derived from far-UV CD indicates that the secondary structure is similar in the three proteins and dominated by beta-sheet. The tryptophan fluorescence maximum is blue-shifted in the constructs containing two and six MBDs relative to the monomer, suggesting more structurally buried tryptophan(s), compared to the single MBD construct. Copper(I) binding has been studied by equilibrium dialysis under anaerobic conditions. We show that the copper(I) binding to constructs containing two and six domains is cooperative, with Hill coefficients of 1.5 and 4, respectively. The apparent affinities are described by K(0.5), determined to be 65 microM and 19 microM for constructs containing two and six domains, respectively. Our data reveal a unique regulation of Menkes protein upon a change in copper(I) concentration. The regulation does not occur as an 'all-or-none' cooperativity, suggesting that the copper(I) binding domains have a basal low affinity for binding and release of copper(I) at low concentrations but are able to respond to higher copper levels by increasing the affinity, thereby contributing to prevent the copper concentration from reaching toxic levels in the cell.

The cDNA, coding for the first metal-binding domain (MBD1) of Menkes protein, was cloned into the T7-system based vector, pCA. The T7 lysozyme-encoding plasmid, pLysS, is shown to be crucial for expression, suggesting that the protein is toxic to the cells. Adding copper to the growth medium did not affect the plasmid stability. MBD1 is purified in two steps with a typical yield of 12 mg.L-1. Menkes protein, a P-type ATPase, contains a sequence GMXCXSC that is repeated six times, at the N-terminus. The paired cysteine residues are involved in metal binding. MBD1 has only two cysteine residues, which can exist as free thiol groups (reduced), as a disulphide bond (oxidized) or bound to a metal ion [e.g. Cu(I)-MBD1]. These three MBD1 forms have been investigated using CD. No major spectral change was seen between the different MBD1 forms, indicating that the folding is not changed upon metal binding. A copper-bound MBD1 was also studied by EPR, and the lack of an EPR signal suggests that the oxidation state of copper bound to MBD1 is Cu(I). Cu(I) binding studies were performed by equilibrium dialysis and revealed a stoichiometry of 1 : 1 and an apparent Kd = 46 microM. Oxidized MBD1, however, is not able to bind copper. Different copper complexes were investigated for their ability to reconstitute apo-MBD1. Given the same total copper concentration CuCl43- was superior to Cu(I)-thiourea (structural analogue of metallothionein) and Cu(I)-glutathione (used at fivefold higher copper concentration) although the latter two were able to partially reconstitute apo-MBD1. Cu(II) was not able to reconstitute apo-MBD1, presumably due to Cu(II)-induced oxidation of the thiol groups. Based on our results, glutathione and/or metallothionein are likely candidates for the in vivo incorporation of copper to Menkes protein.

The unfolding by guanidine hydrochloride (GuHCl) and the refolding on dilution of zinc and apoazurin have been monitored by far-UV circular dichroism (CD). With the native protein, the unfolding was followed by CD and optical absorption in the visible spectral region. With the zinc protein, the reversible unfolding has also been followed by tryptophan fluorescence and NMR. The zinc and Cu2+ metal ions remain associated with the protein in the unfolded state. When the unfolding of the native protein is followed by CD, the initial, reversible transition due to unfolding is followed by a slow change associated with the reduction of Cu2+ by the thiol group of the ligand Cys112. The unfolding of apoazurin displays two CD transitions, which evidence suggests represent different folding domains, the least stable one including the metal-binding site and the other one the rest of the beta-sheet structure. Both occur at a lower GuHCl concentration than the unfolding of the native protein. The CD titrations also demonstrate that zinc azurin has a lower stability than the copper protein. Unfolding of zinc azurin followed by tryptophan fluorescence occurs at a much lower GuHCl concentration than the CD changes, and NMR spectra show that there is no loss of secondary and tertiary structure at this concentration, whereas the CD-detected loss of secondary structure correlates with the NMR changes. Thus, the fluorescence change is ascribed to a small local perturbation of the structure around the single tryptophan residue. The differences in stability of the three forms of azurin are discussed in terms of the rack mechanism. A bound metal ion stabilizes the native fold, and this stabilization is larger for Cu(II) than for Zn(II), reflecting the higher affinity of the protein for Cu(II).

The Met121Glu azurin mutant has been crystallized and the structure determined at a resolution of 2.3 A. In the crystal structure a carboxyl oxygen of Met121Glu is coordinated to the metal at a distance of 2.2 A. Single-crystal resonance Raman spectroscopy was used to show that the glutamic acid residue in the copper site was in the protonated state. Titration of this residue gives rise to a number of unusual, pH-dependent properties: as the pH is increased from 4 to 8, the S(Cys)-Cu ligand-to-metal charge transfer bands are blue shifted and their intensity ratio is reversed, the EPR signal changes from type 1 copper to a new form of protein-bound copper, and the redox potential changes from 370 to 180 mV. The spectroscopic changes in this pH interval are consistent with a two-state model. From the pH dependence of the optical and EPR spectra, pKa = 5.0 for the glutamic acid in the oxidized protein was determined.

The crystal structure of cobalt-substituted azurin from Pseudomonas aeruginosa has been determined to final crystallographic R value of 0.175 at 1.9 A resolution. There are four molecules in the asymmetric unit in the structure, and these four molecules are packed as a dimer of dimers. The dimer packing is very similar to that of the wild-type Pseudomonas aeruginosa azurin dimer. Replacement of the native copper by the cobalt ion has only small effects on the metal binding site presumably because of the existence of an extensive network of hydrogen bonds in its immediate neighborhood. Some differences are obvious, however. In wild-type azurin the copper atom occupies a distorted trigonal bipyramidal site, while cobalt similar to zinc and nickel occupy a distorted tetrahedral site, in which the distance to the Met121,S(delta) atom is increased to 3.3-3.5 A and the distance to the carbonyl oxygen of Gly45 has decreased to 2.1-2.4 A. The X-band EPR spectrum of the high-spin Co(II) in azurin is well resolved (apparent g values gx' = 5.23; gy' = 3.83; gz' = 1.995, and hyperfine splittings Ax' = 31; Ay' = 20-30; Az' = 53 G) and indicates that the ligand field is close to axial.

The binding of small exogenous ligands to mutants of the blue copper protein azurin from Pseudomonas aeruginosa, altered in the axial position, Met121X (X = Gly, Ala, Val, Leu, or Asp), has been studied with optical and electron paramagnetic resonance (EPR) spectroscopy. The results show that small molecules can enter the pocket left by the side chain of Met121. For azide, the dissociation constants are Leu > Val > Ala, reflecting the increasing space available. The Gly and Asp mutants bind azide less strongly than the Ala mutant, due to competition with water (Gly) and the polar side chain (Asp). Similar trends are found for thiocyanate. Cyanide binds equally well to the Ala and Val mutants. A number of other small potential ligands were tried. Alcohols do not affect room-temperature optical spectra, but at low temperatures, the EPR spectrum is stellacyanin-like, indicative of a weak axial interaction. Ligands binding with a carboxyl group or nitrogen (e.g. acetate or azide) convert the metal center to a form intermediate between regular types 1 and 2, presumably by pulling the copper ion out of the trigonal plane formed by Cys(S) and two His(N). Cyanide interacts strongly as shown by the hyperfine coupling to the 13C nucleus. With increasing strength of the axial interaction, the two major bands in the visible region (600 and 400-500 nm) shift in parallel to higher energy, and at the same time, the strength of the latter transition increases at the expense of the former. This demonstrates that these transitions have a common origin, namely S-to-Cu charge transfer transition.

In the family of small blue-copper proteins azurins are unique in that they contain a disulfide bridge close to the amino-terminal end. It is situated in the 'south' side of the molecule, about 25 A away from the copper. Site-specific mutagenesis was used to exchange one or both of the cysteines in the bridge for serines in Pseudomonas aeruginosa azurin. In the double mutant Cys3Ser-Cys26Ser the Type 1 Cu is converted into Type 2, and the fluorescence of the single internal tryptophan shows that it becomes exposed to a polar environment. The circular dichroism spectrum indicates a loss of beta-structure. Thus, this mutation prevents the correct folding of the protein and the formation of the metal-binding site. Single mutants, Cys3Ser or Cys26Ser, can at least in part form native-like structures as shown by optical, EPR, fluorescence and CD spectroscopy. The Cys3Ser mutant can form a stable intermolecular disulfide bond which promotes the native conformation of the protein.