Search

Abstract Transient stability assessment (TSA) plays an important role in ensuring the reliable operation of power systems. With the popularity of phasor measurement units (PMUs), data‐driven TSA methods have been widely concerned. However, the performance of TSA model may deteriorate when data loss occurs due to PMU failure. This paper proposes an adaptive assessment method for transient stability of power systems considering PMU data loss. First, considering the importance of temporal features, a collection of PMU clusters is constructed to minimize the failure risk and maintain full observability of the whole buses of the grid. Secondly, a weighted integrated assessment model based on PMU clusters is constructed by using an improved eXplainable Convolutional neural network for Multivariate time series classification (XCM) as a TSA classifier. The model can make full use of time series information to carry out adaptive TSA and maintain the robustness of the assessment performance even when PMU failure occurs. Finally, it is verified in a modified IEEE 39‐bus system with wind power and solar power. The effect of the proposed method shows high accuracy and strong anti‐noise interference ability in case of data loss.

Free oil, rather than adsorbed oil, is the main contributor to shale oil production with current development technologies, and assessing oil contents in different occurrence states (adsorbed oil vs. free oil) is a critical component in evaluating the economics of shale wells and plays. Although various methodologies have been developed, there are still some fundamental issues in assessing the oil contents in different occurrence states in shale. In this study, a new method was developed to estimate the adsorbed and free oil contents in the Second Member of the Eocene Kongdian Formation (Ek2) shales in Cangdong Sag, Bohai Bay Basin. This method combines the results of standard Rock-Eval pyrolysis and multi-step Rock-Eval pyrolysis with thin section petrography, X-ray diffraction for mineralogy, total organic carbon analyses, field emission scanning electron microscopy for pore morphology, and pore structure analyses by nitrogen physisorption and mercury intrusion porosimetry. Nine lithofacies were identified in a total of 50 shale samples, and the results show that the adsorbed and free oil are mainly contained in pores with diameters > 20 nm, and their contents are mainly controlled by organic matter abundance and thermal maturity of shales. While pore space volume influences the storage of shale oil, it is not a major determinant. Models of shale oil occurrence and its evolution are proposed, suggesting that the high S1 contents of organic-rich and -fair shales, which the latter resulted from oil migration, are the most favorable exploration targets of Ek2 shales. The findings of this study will help prioritize shale oil exploration targets in Ek2 shales.

Shale gas is a prospective cleaner energy resource and the exploration and development of shale gas has made breakthroughs in many countries. Structure deformation is one of the main controlling factors of shale gas accumulation and enrichment in complex tectonic areas in southern China. In order to estimate the shale gas capacity of structurally deformed shale reservoirs, it is necessary to understand the systematic evolution of organic pores in the process of structural deformation. In particular, as the main storage space of high-over-mature marine shale reservoirs, the organic matter pore system directly affects the occurrence and migration of shale gas; however, there is a lack of systematic research on the fractal characteristics and deformation mechanism of organic pores under the background of different tectonic stresses. Therefore, to clarify the above issues, modular automated processing system (MAPS) scanning, low-pressure gas adsorption, quantitative evaluation of minerals by scanning (QEMSCAN), and focused ion beam scanning electron microscopy (FIB-SEM) were performed and interpreted with fractal and morphology analyses to investigate the deformation mechanisms and structure of organic pores from different tectonic units in Silurian Longmaxi shale. Results showed that in stress concentration areas such as around veins or high-angle fractures, the organic pore length-width ratio and the fractal dimension are higher, indicating that the pore is more obviously modified by stress. Under different tectonic backgrounds, the shale reservoir in Weiyuan suffered severe denudation and stronger tectonic compression during burial, which means that the organic pores are dominated by long strip pores and slit-shaped pores with high fractal dimension, while the pressure coefficient in Luzhou is high and the structural compression is weak, resulting in suborbicular pores and ink bottle pores with low fractal dimension. The porosity and permeability of different forms of organic pores are also obviously different; the connectivity of honeycomb pores with the smallest fractal dimension is the worst, that of suborbicular organic pores is medium, and that of long strip organic pores with the highest fractal dimension is the best. This study provides more mechanism discussion and case analysis for the microscopic heterogeneity of organic pores in shale reservoirs and also provides a new analysis perspective for the mechanism of shale gas productivity differences in different stress–strain environments.

Abstract Background Diminished ovarian reserve (DOR) is a common cause of female infertility, with genetic factors being a significant contributor. However, due to high genetic heterogeneity, the etiology of DOR in many cases remains unknown. In this study, we analyzed the phenotype of a young woman with primary infertility and performed molecular genetic analysis to identify the genetic cause of her condition, thus providing important insights for genetic counseling and reproductive guidance. Methods We collected the patient’s basic information, clinical data, as well as diagnostic and therapeutic history and performed whole-exome sequencing on her peripheral blood. Candidate pathogenic variants were validated by Sanger sequencing in family members, and the pathogenicity of variants was analyzed using ACMG guidelines. We used bioinformatics tools to predict variant effects on splicing and protein function, and performed in vitro experiments including minigene assay and expression analysis to evaluate their functional effects on HEK293T. Results We identified biallelic MSH4 variants, c.2374 A > G (p.Thr792Ala) and c.2222_2225delAAGA (p.Lys741Argfs*2) in the DOR patient. According to ACMG guidelines, the former was classified as likely pathogenic, while the latter was classified as pathogenic. The patient presented with poor oocyte quantity and quality, resulting in unsuccessful in vitro fertilization cycles. Bioinformatics and in vitro functional analysis showed that the c.2374 A > G variant altered the local conformation of the MutS_V domain without decreasing MSH4 protein expression, while the c.2222_2225delAAGA variant led to a reduction in MSH4 protein expression without impacting splicing. Conclusions In this study, we present evidence of biallelic variants in MSH4 as a potential cause of DOR. Our findings indicate a correlation between MSH4 variants and reduced oocyte quality, as well as abnormal morphology of the first polar body, thereby expanding the phenotypic spectrum associated with MSH4 variants. Furthermore, Our study emphasizes the importance of utilizing whole-exome sequencing and functional analysis in diagnosing genetic causes, as well as providing effective genetic counseling and reproductive guidance for DOR patients.

Abstract Background The aim of this study was to compare one-month acquisition and half-a-year quality retention of cardiopulmonary resuscitation (CPR) skills after initial training of medical students between peer videorecording feedback training (PVF) and traditional peer verbal feedback training (TVF). Methods Participants were randomly assigned to the PVF group (n = 62) and the TVF group (n = 65). All participants received a 45-min CPR training program performed by an American Heart Association basic life support-certified instructor, and then they began two hours of practice in groups. During interactive peer learning, students cooperated in couples of a doer and a helper to realize maximization of each other’s learning. In the PVF group, training performance feedback came from peers based on practice videorecording. In the TVF group, feedback came from peers verbally without videorecording. CPR quality was tested at 1 and 6 months after training. Results After 1 month of initial training, the PVF group had a better presentation of CPR skills acquisition than the TVF group. Compared to the TVF group, the PVF group had significantly higher total scores, compression depth, appropriate compression depth, and complete chest recoil (p 0.05). Conclusions Compared to TVF, PVF is more effective in enhancing CPR skill acquisition at 1 month. After half a year, CPR skill quality was obviously reduced in both groups, and no difference in CPR quality was found between the two groups.

The nutrient removal and biomass production of the internal circulating fluidized bed microalgae membrane bioreactor (ICFB-MMBR) was studied under different cultivation modes, influent TOC, influent pH, and influent N/P. Platymonas helgolandica tsingtaoensis was used as the biological source. The growth of P. helgolandica tsingtaoensis and the removal efficiency of pollutants in the mixotrophy culture mode were improved compared with other culture modes. With the increased influent TOC, the average growth rate of P. helgolandica tsingtaoensis increased, and ammonia nitrogen and total phosphorus removal rate were improved. The P. helgolandica tsingtaoensis growth rate and nutrient removal efficiencies at the influent pH of 8 were the best among the different influent pH values. As the influent N/P ratio increased from 5 to 20, the P. helgolandica tsingtaoensis growth rate and pollutant removal rate increased gradually. When the influent N/P ratio was higher than 20, the P. helgolandica tsingtaoensis growth rate and pollutant removal rate tended to be stable and did not significantly change with the increase of influent N/P ratio. At the proper influent conditions, the high P. helgolandica tsingtaoensis biomass and nutrient removal efficiency could be obtained in the microalgae membrane bioreactor, which could provide a theoretical basis for the application of the system for wastewater treatment.

The mariculture wastewater treatment performance for the combined system of anoxic filter and membrane bioreactor (AF-MBR) was investigated under different hydraulic retention times (HRTs), influent alkalinity, and influent ammonia nitrogen load. The results showed that the removal efficiencies of TOC and total nitrogen were slightly better at the HRT of 8 h than at other HRTs, and the phosphate removal efficiency decreased with the increase of HRT. With the increase of influent alkalinity, the removal of TOC and phosphate did not change significantly. With the increase of influent alkalinity from 300 mg/L to 500 mg/L, the total nitrogen removal efficiency of AF-MBR was improved, but the change of the removal efficiency was not obvious when the alkalinity increased from 500 mg/L to 600 mg/L. When the influent concentration of ammonia nitrogen varied from 20 mg/L to 50 mg/L, the removal efficiencies of TOC, phosphate, and total nitrogen by AF-MBR were stable. An interesting finding was that in all the different operation conditions examined, the treatment efficiency of AF-MBR was always better than that of the control MBR. The concentrations of NO3−-N in AF-MBR were relatively low, whereas NO3−-N accumulated in the control MBR. The reason was that the microorganisms attached to the carrier and remained fixed in the aerobic and anoxic spaces, so that there was a gradual enrichment of bacteria characterized by slow growth in a high-salt environment. In addition, the microorganisms could gather and grow on the carrier forming a biofilm with higher activity, a richer and more stable population, and enhanced ability to resist a load impact.

An effective porosity is defined as the ratio of volume of interconnected pore space to total volume of a porous sample. It controls the magnitude of fluid flow and is a key parameter in the assessment of recoverable resources. However, its accurate measurement in tight formations is challenging, due to their complex pore structure and lithofacies heterogeneity. In this study, porosities of sixteen lacustrine shale samples from the second Member of the Kongdian Formation (Ek2) in the Cangdong Sag, Bohai Bay Basin were measured and compared using multiple methods and sample sizes to compare and contrast the effective porosity results. The methods included helium pycnometry (HP; cubes of 1 cm3 and grains at 500-841 μm), water immersion porosimetry (WIP; cubes), mercury intrusion porosimetry (MIP; cubes), and nuclear magnetic resonance (NMR; cubes). Finally, samples were completely sealed using paraffin for bulk density measurements to evaluate the extent of potential clay swelling in shale samples involving probing fluids. Results from the HP, WIP, and MIP methods for skeletal density, bulk density, and effective porosity with cubic samples were compared. While very similar skeletal densities were found for all three methods, a lower bulk density, and therefore lower porosity, from the MIP approach can be attributed to the experimental conditions (e.g., vacuum efficiency, applied pressure, wettability of water/helium vs. mercury) and the probable presence of pores with diameters larger than 50 μm not measurable by MIP. Furthermore, the HP porosity of granular samples with 500-841 μm grain sizes can be regarded as approaching the total porosity. The complicated relationship between WIP and NMR porosities may result from the heat-induced volatilization of moisture in pores during NMR tests, and countercurrent imbibition of water replacing the residual hydrocarbons during the saturation process for sample preparation in both tests. The swelling behavior of the lacustrine Ek2 shale with water is not significant because of the low content of expansive clay minerals. In summary, the WIP and HP methods are recommended for effective porosity measurement, whereas the NMR and MIP methods are invaluable for the measurement of pore-size distribution, with additional information on the effective porosity.