Search

Your search keyword '"Antman, Yair"' showing total 39 results
Start Over Author "Antman, Yair" Publication Year Range Last 50 years
39 results on '"Antman, Yair"'

1. High Power on-chip Integrated Laser

Author

Antman, Yair, Gil-Molina, Andres, Westreich, Ohad, Ji, Xingchen, Gaeta, Alexander L., and Lipson, Michal

Subjects
Physics - Optics
Abstract

The lack of high power integrated lasers have been limiting silicon photonics. Despite much progress made in chip-scale laser integration, power remains below the level required for key applications. The main inhibiting factor for high power is the low energy efficiency at high pumping currents, dictated by the small size of the active device. Here we break this power limitation by demonstrating a platform that relies on the coupling of a broad-area multimode gain to a silicon-nitride feedback chip, which acts as an external cavity. The feedback provided by the silicon-nitride chip is routed through a ring resonator and a single-mode filter, thus causing the otherwise multimode-gain chip to concentrate its power into a single highly-coherent mode. Our device produces more than 150 mW of power and 400 kHz linewidth. We achieve these high-performance metrics while maintaining a small footprint of 3 mm^2.

Published
2022

7. Brillouin optical correlation domain analysis in composite material beams

Author

Stern, Yonatan, London, Yosef, Preter, Eyal, Antman, Yair, Diamandi, Hilel Hagai, Silbiger, Maayan, Adler, Gadi, Levenberg, Eyal, Shalev, Doron, Zadok, Avi, Stern, Yonatan, London, Yosef, Preter, Eyal, Antman, Yair, Diamandi, Hilel Hagai, Silbiger, Maayan, Adler, Gadi, Levenberg, Eyal, Shalev, Doron, and Zadok, Avi

Abstract

Structural health monitoring is a critical requirement in many composites. Numerous monitoring strategies rely on measurements of temperature or strain (or both), however these are often restricted to point-sensing or to the coverage of small areas. Spatially-continuous data can be obtained with optical fiber sensors. In this work, we report high-resolution distributed Brillouin sensing over standard fibers that are embedded in composite structures. A phase-coded, Brillouin optical correlation domain analysis (B-OCDA) protocol was employed, with spatial resolution of 2 cm and sensitivity of 1 °K or 20 micro-strain. A portable measurement setup was designed and assembled on the premises of a composite structures manufacturer. The setup was successfully utilized in several structural health monitoring scenarios: (a) monitoring the production and curing of a composite beam over 60 h; (b) estimating the stiffness and Young’s modulus of a composite beam; and (c) distributed strain measurements across the surfaces of a model wing of an unmanned aerial vehicle. The measurements are supported by the predictions of structural analysis calculations. The results illustrate the potential added values of high-resolution, distributed Brillouin sensing in the structural health monitoring of composites.

Published
2017

39. Brillouin distributed sensing using localized and stationary dynamic gratings

Author

Primerov, Nikolay, Antman, Yair, Sancho, Juan, Zadok, Avi, and Thevenaz, Luc

Abstract

In this work, we apply a recent technique for the generation of stimulated Brillouin scattering (SBS) dynamic gratings that are both localized and stationary to realize high-resolution distributed temperature sensing. The gratings generation method relies on the phase modulation of two pump waves by a common pseudo-random bit sequence (PRBS), with a symbol duration that is much shorter than the acoustic lifetime. This way the acoustic wave can efficiently build up in the medium at discrete locations only, where the phase difference between the two waves does not temporarily vary. The separation between neighboring correlation peaks can be made arbitrarily long. Using the proposed method, we experimentally demonstrate distributed temperature sensing with 5 cm resolution, based on modifications to both the local birefringence and the local Brillouin frequency shift in polarization maintaining fibers. The localization method does not require wideband detection and can generate the grating at any random position along the fiber, with complete flexibility. The phase-coding method is equally applicable to high-resolution SBS distributed sensing over standard fibers.

Published
2012
Full Text
View/download PDF

Catalog

Books, media, physical & digital resources
See catalog results