Search

Background: Genetic selection based on direct indicators of heat stress could capture additional mechanisms that are involved in heat stress response and enable more accurate selection for more heat-tolerant individuals. Therefore, the main objectives of this study were to estimate genetic parameters for various heat stress indicators in a commercial population of Landrace × Large White lactating sows measured under heat stress conditions. The main indicators evaluated were: skin surface temperatures (SST), automatically-recorded vaginal temperature (TV), respiration rate (RR), panting score (PS), body condition score (BCS), hair density (HD), body size (BS), ear size, and respiration efficiency (Reff). Results: Traits based on TV presented moderate heritability estimates, ranging from 0.15 ± 0.02 to 0.29 ± 0.05. Low heritability estimates were found for SST traits (from 0.04 ± 0.01 to 0.06 ± 0.01), RR (0.06 ± 0.01), PS (0.05 0.01), and Reff (0.03 ± 0.01). Moderate to high heritability values were estimated for BCS (0.29 ± 0.04 for caliper measurements and 0.25 ± 0.04 for visual assessments), HD (0.25 ± 0.05), BS (0.33 ± 0.05), ear area (EA; 0.40 ± 0.09), and ear length (EL; 0.32 ± 0.07). High genetic correlations were estimated among SST traits (> 0.78) and among TV traits (> 0.75). Similarly, high genetic correlations were also estimated for RR with PS (0.87 ± 0.02), with BCS measures (0.92 ± 0.04), and with ear measures (0.95 ± 0.03). Low to moderate positive genetic correlations were estimated between SST and TV (from 0.25 ± 0.04 to 0.76 ± 0.07). Low genetic correlations were estimated between TV and BCS (from − 0.01 ± 0.08 to 0.06 ± 0.07). Respiration efficiency was estimated to be positively and moderately correlated with RR (0.36 ± 0.04), PS (0.56 ± 0.03), and BCS (0.56 ± 0.05 for caliper measurements and 0.50 ± 0.05 for the visual assessments). All other trait combinations were lowly genetically correlated. Conclusions: A comprehensive landscape of heritabilities and genetic correlations for various thermotolerance indicators in lactating sows were estimated. All traits evaluated are under genetic control and heritable, with different magnitudes, indicating that genetic progress is possible for all of them. The genetic correlation estimates provide evidence for the complex relationships between these traits and confirm the importance of a sub-index of thermotolerance traits to improve heat tolerance in pigs. [ABSTRACT FROM AUTHOR]

Background: Flavobacterium columnare is the pathogen agent of columnaris disease, a major emerging disease that affects rainbow trout aquaculture. Selective breeding using genomic selection has potential to achieve cumulative improvement of the host resistance. However, genomic selection is expensive partly because of the cost of genotyping large numbers of animals using high-density single nucleotide polymorphism (SNP) arrays. The objective of this study was to assess the efficiency of genomic selection for resistance to F. columnare using in silico low-density (LD) panels combined with imputation. After a natural outbreak of columnaris disease, 2874 challenged fish and 469 fish from the parental generation (n = 81 parents) were genotyped with 27,907 SNPs. The efficiency of genomic prediction using LD panels was assessed for 10 panels of different densities, which were created in silico using two sampling methods, random and equally spaced. All LD panels were also imputed to the full 28K HD panel using the parental generation as the reference population, and genomic predictions were re-evaluated. The potential of prioritizing SNPs that are associated with resistance to F. columnare was also tested for the six lower-density panels. Results: The accuracies of both imputation and genomic predictions were similar with random and equally-spaced sampling of SNPs. Using LD panels of at least 3000 SNPs or lower-density panels (as low as 300 SNPs) combined with imputation resulted in accuracies that were comparable to those of the 28K HD panel and were 11% higher than the pedigree-based predictions. Conclusions: Compared to using the commercial HD panel, LD panels combined with imputation may provide a more affordable approach to genomic prediction of breeding values, which supports a more widespread adoption of genomic selection in aquaculture breeding programmes. [ABSTRACT FROM AUTHOR]

Background: Most genomic prediction applications in animal breeding use genotypes with tens of thousands of single nucleotide polymorphisms (SNPs). However, modern sequencing technologies and imputation algorithms can generate ultra-high-density genotypes (including millions of SNPs) at an affordable cost. Empirical studies have not produced clear evidence that using ultra-high-density genotypes can significantly improve prediction accuracy. However, (whole-genome) prediction accuracy is not very informative about the ability of a model to capture the genetic signals from specific genomic regions. To address this problem, we propose a simple methodology that detects chromosome regions for which a specific model (e.g., single-step genomic best linear unbiased prediction (ssGBLUP)) may fail to fully capture the genetic signal present in such segments—a phenomenon that we refer to as signal leakage. We propose to detect regions with evidence of signal leakage by testing the association of residuals from a pedigree or a genomic model with SNP genotypes. We discuss how this approach can be used to map regions with signals that are poorly captured by a model and to identify strategies to fix those problems (e.g., using a different prior or increasing marker density). Finally, we explored the proposed approach to scan for signal leakage of different models (pedigree-based, ssGBLUP, and various Bayesian models) applied to growth-related phenotypes (average daily gain and backfat thickness) in pigs. Results: We report widespread evidence of signal leakage for pedigree-based models. Including a percentage of animals with SNP data in ssGBLUP reduced the extent of signal leakage. However, local peaks of missed signals remained in some regions, even when all animals were genotyped. Using variable selection priors solves leakage points that are caused by excessive shrinkage of marker effects. Nevertheless, these models still miss signals in some regions due to low linkage disequilibrium between the SNPs on the array used and causal variants. Thus, we discuss how such problems could be addressed by adding sequence SNPs from those regions to the prediction model. Conclusions: Residual single-marker regression analysis is a simple approach that can be used to detect regional genomic signals that are poorly captured by a model and to indicate ways to fix such problems. [ABSTRACT FROM AUTHOR]

Genome selection is mainly used in disease-resistant traits of aquatic species; however, its implementation is hindered by a high cost of genotype and phenotype data collection. Single-step genomic best linear unbiased prediction (SSGBLUP) can integrate phenotypes, genetic markers, and pedigree records into simultaneous prediction without increasing genotyping costs. The objective of this study is to investigate the performance of SSGBLUP in large yellow croaker and to evaluate the effects of the number of phenotypic records and genotyping per family on the predictive ability of SSGBLUP. A large yellow croaker population consists of 6898 individuals from 14 families with survival time resistant against Cryptocaryon irritans (C. irritans), body weight (BW), and body length (BL) traits were collected, of which 669 individuals were genotyped. Results showed that the mean predictive ability of all traits in the individuals randomly sampling for SSGBLUP, GBLUP, and BLUP was 0.738, 0.738, and 0.736, respectively. Moreover, the predictive ability of SSGBLUP and BLUP models did not increase with the extra phenotypic records per family, in which the predictive ability of SSGBLUP and BLUP in survival time was 0.853 and 0.851 for only genotyped data (N = 0) used, and 0.852, 0.845 for all phenotypic records (N = 600) used, respectively. However, with the increase in the genotype number of training set, the prediction ability of SSGBLUP and GBLUP model was increased and the highest predictive ability was gained when the genotype number per family was 40 or 45. In addition, the prediction ability of SSGBLUP model was higher than that of GBLUP. Our study showed that the SSGBLUP model still has great potential and advantages in genomic breeding of large yellow croakers. It is recommended that each family provide 100 phenotypic individuals, of which 40 individuals with genotyping data for SSGBLUP model prediction and family resistance evaluation. [ABSTRACT FROM AUTHOR]

Genomic selection methods are particularly useful for traits that are difficult or expensive to measure. We investigated the impact of using predictor growth traits and/or genomic information to increase the breeding value (BV) predictive accuracies for target scarcely recorded wood quality traits in an open-pollinated Eucalyptus grandis population. The performance of single- and multiple-trait single-step genomic best linear unbiased prediction and conventional pedigree-based models were compared in terms of the predictive accuracies (PA) of estimated BV for the target traits. We also derived the contributions of the BV for candidate trees to better understand our results. The inclusion of predictor traits in both, the training and the validation sets, together with genomic information, improved the PA (up to 17.7%) for pulp yield and cellulose. However, significant improvements in PA were not observed when predictor traits were recorded only in the training set or when the impact of genomic information alone was assessed. Changes in the PA were explained by the variations in the maternal contributions, contribution/s from all the predictor/s trait/s, and from genotyped trees. We conclude that there is not a "universal" rule regarding the use of genomic information and records on predictor traits. However, assessing the contributions to the BV of validation trees may help to better design how to benefit from predictor traits in forest tree breeding. [ABSTRACT FROM AUTHOR]

Background: Skin damage is a trait of economic and welfare importance that results from social interactions between animals. These interactions may produce wound signs on the gilt's skin as a result of damage behavior (i.e., fighting), biting syndromes (i.e., tail, vulva, or ear biting), and swine inflammation and necrosis syndrome. Although current selection for traits that are affected by social interactions primarily focuses on improving direct genetic effects, combined selection on direct and social genetic effects could increase genetic gain and avoid a negative response to selection in cases of competitive behavior. The objectives of this study were to (1) estimate variance components for combined skin damage (CSD), with or without accounting for social genetic effects, (2) investigate the impact of including genomic information on the prediction accuracy, bias, and dispersion of CSD estimated breeding values, and (3) perform a single-step genome-wide association study (ssGWAS) of CSD under a classical and a social interaction model. Results: Our results show that CSD is heritable and affected by social genetic effects. Modeling CSD with social interaction models increased the total heritable variance relative to the phenotypic variance by three-fold compared to the classical model. Including genomic information increased the prediction accuracy of direct, social, and total estimated breeding values for purebred sires by at least 21.2%. Bias and dispersion of estimated breeding values were reduced by including genomic information in classical and social interaction models but remained present. The ssGWAS did not identify any single nucleotide polymorphism that was significantly associated with social or direct genetic effects for CSD. Conclusions: Combined skin damage is heritable, and genetic selection against this trait will increase the welfare of animals in the long term. Combined skin damage is affected by social genetic effects, and modeling this trait with a social interaction model increases the potential for genetic improvement. Including genomic information increases the prediction accuracy of estimated breeding values and reduces their bias and dispersion, although some biases persist. The results of the genome-wide association study indicate that CSD has a polygenic architecture and no major quantitative trait locus was detected. [ABSTRACT FROM AUTHOR]

Background: Whole-genome sequence (WGS) data harbor causative variants that may not be present in standard single nucleotide polymorphism (SNP) chip data. The objective of this study was to investigate the impact of using preselected variants from WGS for single-step genomic predictions in maternal and terminal pig lines with up to 1.8k sequenced and 104k sequence imputed animals per line. Methods: Two maternal and four terminal lines were investigated for eight and seven traits, respectively. The number of sequenced animals ranged from 1365 to 1491 for the maternal lines and 381 to 1865 for the terminal lines. Imputation to sequence occurred within each line for 66k to 76k animals for the maternal lines and 29k to 104k animals for the terminal lines. Two preselected SNP sets were generated based on a genome-wide association study (GWAS). Top40k included the SNPs with the lowest p-value in each of the 40k genomic windows, and ChipPlusSign included significant variants integrated into the porcine SNP chip used for routine genotyping. We compared the performance of single-step genomic predictions between using preselected SNP sets assuming equal or different variances and the standard porcine SNP chip. Results: In the maternal lines, ChipPlusSign and Top40k showed an average increase in accuracy of 0.6 and 4.9%, respectively, compared to the regular porcine SNP chip. The greatest increase was obtained with Top40k, particularly for fertility traits, for which the initial accuracy based on the standard SNP chip was low. However, in the terminal lines, Top40k resulted in an average loss of accuracy of 1%. ChipPlusSign provided a positive, although small, gain in accuracy (0.9%). Assigning different variances for the SNPs slightly improved accuracies when using variances obtained from BayesR. However, increases were inconsistent across the lines and traits. Conclusions: The benefit of using sequence data depends on the line, the size of the genotyped population, and how the WGS variants are preselected. When WGS data are available on hundreds of thousands of animals, using sequence data presents an advantage but this remains limited in pigs. [ABSTRACT FROM AUTHOR]

Background: Identifying true positive variants in genome-wide associations (GWA) depends on several factors, including the number of genotyped individuals. The limited dimensionality of genomic information may give insights into the optimal number of individuals to be used in GWA. This study investigated different discovery set sizes based on the number of largest eigenvalues explaining a certain proportion of variance in the genomic relationship matrix (G). In addition, we investigated the impact on the prediction accuracy by adding variants, which were selected based on different set sizes, to the regular single nucleotide polymorphism (SNP) chips used for genomic prediction. Methods: We simulated sequence data that included 500k SNPs with 200 or 2000 quantitative trait nucleotides (QTN). A regular 50k panel included one in every ten simulated SNPs. Effective population size (Ne) was set to 20 or 200. GWA were performed using a number of genotyped animals equivalent to the number of largest eigenvalues of G (EIG) explaining 50, 60, 70, 80, 90, 95, 98, and 99% of the variance. In addition, the largest discovery set consisted of 30k genotyped animals. Limited or extensive phenotypic information was mimicked by changing the trait heritability. Significant and large-effect size SNPs were added to the 50k panel and used for single-step genomic best linear unbiased prediction (ssGBLUP). Results: Using a number of genotyped animals corresponding to at least EIG98 allowed the identification of QTN with the largest effect sizes when Ne was large. Populations with smaller Ne required more than EIG98. Furthermore, including genotyped animals with a higher reliability (i.e., a higher trait heritability) improved the identification of the most informative QTN. Prediction accuracy was highest when the significant or the large-effect SNPs representing twice the number of simulated QTN were added to the 50k panel. Conclusions: Accurately identifying causative variants from sequence data depends on the effective population size and, therefore, on the dimensionality of genomic information. This dimensionality can help identify the most suitable sample size for GWA and could be considered for variant selection, especially when resources are restricted. Even when variants are accurately identified, their inclusion in prediction models has limited benefits. [ABSTRACT FROM AUTHOR]

Background: Anqing six-end-white pig is a native breed in Anhui Province. The pigs have the disadvantages of a slow growth rate, low proportion of lean meat, and thick back fat, but feature the advantages of strong stress resistance and excellent meat quality. Duroc pig is an introduced pig breed with a fast growth rate and high proportion of lean meat. With the latter breed featuring superior growth characteristics but inferior meat quality traits, the underlying molecular mechanism that causes these phenotypic differences between Chinese and foreign pigs is still unclear. Results: In this study, copy number variation (CNV) detection was performed using the re-sequencing data of Anqing Six-end-white pigs and Duroc pigs, A total of 65,701 CNVs were obtained. After merging the CNVs with overlapping genomic positions, 881 CNV regions (CNVRs) were obtained. Based on the obtained CNVR information combined with their positions on the 18 chromosomes, a whole-genome map of the pig CNVs was drawn. GO analysis of the genes in the CNVRs showed that they were primarily involved in the cellular processes of proliferation, differentiation, and adhesion, and primarily involved in the biological processes of fat metabolism, reproductive traits, and immune processes. Conclusion: The difference analysis of the CNVs between the Chinese and foreign pig breeds showed that the CNV of the Anqing six-end-white pig genome was higher than that of the introduced pig breed Duroc. Six genes related to fat metabolism, reproductive performance, and stress resistance were found in genome-wide CNVRs (DPF3, LEPR, MAP2K6, PPARA, TRAF6, NLRP4). [ABSTRACT FROM AUTHOR]

Copyright of Nihon Chikusan Gakkaiho is the property of Japanese Society of Animal Science and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Kisspeptin (Kiss) and kisspeptin receptor (Kissr) system is a key regulator of GnRH expression in several vertebrates. The Indian catfish, Clarias magur, is popular in the Indian sub-continent, and a neo-type of the Asian catfish, C. batrachus. Catfish breeding is constrained as males do not release milt captivity with/without stimulation. Magur Kiss/Kissr system comprising of kiss1, kiss2, kissr1, and kissr2 genes was characterized for the first time. Full-length mRNA was sequenced using RACE PCR. Neighbor-joining tree of predicted proteins shows one clade of teleost orthologs. Magur whole genome (NCBI GenBank) has single copies of each gene, though yet unannotated/misannotated. Anomalies in the nomenclature of earlier sequences in GenBank were noted. Relative gene expression was profiled during various ontogenic stages, in six tissues including brain and gonads at maturity, and also in brains and gonads of premature and spent fish. Expression of gnrh1, gnrhr1, and gnrhr2 was estimated concomitantly. The kiss1 was the first to be twofold upregulated (P < 0.05) at 12 h post fertilization. Kiss/Kissr genes expressed primarily in the brain, ovary, and testis. Though kiss2 was 10 times higher than kiss1, only kiss1 showed significant modulation across stages and appears to be the active isotype that regulates GnRH in magur., (© 2024. The Author(s), under exclusive licence to Springer Nature B.V.)

Mithun (Bos frontalis), a domestically raised herbivore, holds significant economic importance for the farming community of Northeast India. This study aimed to elucidate the genetic parameters governing Mithun body weight traits across different ages using data from the sole organized semi-intensive Mithun farm in India. Information was gathered from 110 Mithuns born over a period spanning from 2011 to 2022. Body weight taken at week 1 (W1), 1-month (M1), 3-months (M3), 6-months (M6), 9-months (M9), 12-months (M12), 30-months (M30) and 45-months (M45) were considered for the study. The genetic parameters estimation employed the BLUPF90 suite of programs, incorporating univariate Gibbs sampler animal model with fixed effects; season and period of birth, and sex of the animal. Variance and covariance components, including direct additive genetic effects, were estimated. Heritability estimates for the eight body weight traits ranged from 0.47 ± 0.0050 to 0.50 ± 0.0043, indicating varying genetic influence across growth stages. Results revealed that Mithun herd has a substantial genetic variability for growth traits and therefore there is ample scope to select for a better growth rate. Here, we conclude that Month 12 (M12) and Month 9 (M9) body weights exhibit higher heritability, indicating potential for genetic improvement through selective breeding., (© 2024. The Author(s), under exclusive licence to Springer Nature B.V.)

Background: Genome-wide association studies (GWAS) aim at identifying genomic regions involved in phenotype expression, but identifying causative variants is difficult. Pig Combined Annotation Dependent Depletion (pCADD) scores provide a measure of the predicted consequences of genetic variants. Incorporating pCADD into the GWAS pipeline may help their identification. Our objective was to identify genomic regions associated with loin depth and muscle pH, and identify regions of interest for fine-mapping and further experimental work. Genotypes for ~ 40,000 single nucleotide morphisms (SNPs) were used to perform GWAS for these two traits, using de-regressed breeding values (dEBV) for 329,964 pigs from four commercial lines. Imputed sequence data was used to identify SNPs in strong (≥ 0.80) linkage disequilibrium with lead GWAS SNPs with the highest pCADD scores. Results: Fifteen distinct regions were associated with loin depth and one with loin pH at genome-wide significance. Regions on chromosomes 1, 2, 5, 7, and 16, explained between 0.06 and 3.55% of the additive genetic variance and were strongly associated with loin depth. Only a small part of the additive genetic variance in muscle pH was attributed to SNPs. The results of our pCADD analysis suggests that high-scoring pCADD variants are enriched for missense mutations. Two close but distinct regions on SSC1 were associated with loin depth, and pCADD identified the previously identified missense variant within the MC4R gene for one of the lines. For loin pH, pCADD identified a synonymous variant in the RNF25 gene (SSC15) as the most likely candidate for the muscle pH association. The missense mutation in the PRKAG3 gene known to affect glycogen content was not prioritised by pCADD for loin pH. Conclusions: For loin depth, we identified several strong candidate regions for further statistical fine-mapping that are supported in the literature, and two novel regions. For loin muscle pH, we identified one previously identified associated region. We found mixed evidence for the utility of pCADD as an extension of heuristic fine-mapping. The next step is to perform more sophisticated fine-mapping and expression quantitative trait loci (eQTL) analysis, and then interrogate candidate variants in vitro by perturbation-CRISPR assays. [ABSTRACT FROM AUTHOR]

Background: International evaluations combine data from different countries allowing breeders to have access to larger panels of elite bulls and to increase the accuracy of estimated breeding values (EBV). However, international and national evaluations can use different sources of information to compute EBV (EBVINT and EBVNAT, respectively), leading to differences between them. Choosing one of these EBV results in losing the information that is contained only in the discarded EBV. Our objectives were to define and validate a procedure to integrate publishable sires' EBVINT and their associated reliabilities computed from pedigree-based or single-step international beef cattle evaluations into national evaluations to obtain "blended" EBV. The Italian (ITA) pedigree-based national evaluation was used as a case study to validate the integration procedure. Methods: Publishable sires' international information, i.e. EBVINT and their associated reliabilities, was included in the national evaluation as pseudo-records. Data were available for 444,199 individual age-adjusted weaning weights of Limousin cattle from eight countries and 17,607 genotypes from four countries (ITA excluded). To mimic differences between international and national evaluations, international evaluations included phenotypes (and genotypes) of animals born prior to January 2019, while national evaluations included ITA phenotypes of animals born until April 2019. International evaluations using all available information were considered as reference scenarios. Publishable sires were divided into three groups: sires with ≥ 15, < 15 and no recorded offspring in ITA. Results: Overall, for these three groups, integrating either pedigree-based or single-step international information into national pedigree-based evaluations improved the similarity of the blended EBV with the reference EBV compared to national evaluations without integration. For instance, the correlation with the reference EBV for direct (maternal) EBV went from 0.61 (0.79) for a national evaluation without integration to 0.97 (0.88) when integrating single-step international information, on average across all groups of publishable sires. Conclusions: Our proposed one-animal-at-a-time integration procedure yields blended EBV that are in close agreement with full international EBV for all groups of animals analysed. The procedure can be directly applied by countries since it does not rely on specific software and is computationally inexpensive, allowing straightforward integration of publishable sires' EBVINT from pedigree-based or single-step based international beef cattle evaluations into national evaluations. [ABSTRACT FROM AUTHOR]

Background: Single-step genomic best linear unbiased prediction (ssGBLUP) models allow the combination of genomic, pedigree, and phenotypic data into a single model, which is computationally challenging for large genotyped populations. In practice, genotypes of animals without their own phenotype and progeny, so-called genotyped selection candidates, can become available after genomic breeding values have been estimated by ssGBLUP. In some breeding programmes, genomic estimated breeding values (GEBV) for these animals should be known shortly after obtaining genotype information but recomputing GEBV using the full ssGBLUP takes too much time. In this study, first we compare two equivalent formulations of ssGBLUP models, i.e. one that is based on the Woodbury matrix identity applied to the inverse of the genomic relationship matrix, and one that is based on marker equations. Second, we present computationally-fast approaches to indirectly compute GEBV for genotyped selection candidates, without the need to do the full ssGBLUP evaluation. Results: The indirect approaches use information from the latest ssGBLUP evaluation and rely on the decomposition of GEBV into its components. The two equivalent ssGBLUP models and indirect approaches were tested on a six-trait calving difficulty model using Irish dairy and beef cattle data that include 2.6 million genotyped animals of which about 500,000 were considered as genotyped selection candidates. When using the same computational approaches, the solving phase of the two equivalent ssGBLUP models showed similar requirements for memory and time per iteration. The computational differences between them were due to the preprocessing phase of the genomic information. Regarding the indirect approaches, compared to GEBV obtained from single-step evaluations including all genotypes, indirect GEBV had correlations higher than 0.99 for all traits while showing little dispersion and level bias. Conclusions: In conclusion, ssGBLUP predictions for the genotyped selection candidates were accurately approximated using the presented indirect approaches, which are more memory efficient and computationally fast, compared to solving a full ssGBLUP evaluation. Thus, indirect approaches can be used even on a weekly basis to estimate GEBV for newly genotyped animals, while the full single-step evaluation is done only a few times within a year. [ABSTRACT FROM AUTHOR]

Canola has a long period of flowering in the winter season and this, associated with the lack of other flowers and the use of insecticides to control insect pests, means it may have a great impact on bee populations, such as Apis mellifera L. (Hymenoptera: Apidae). In this context, the use of insecticides with lower residuals and less harmful effects to bees is fundamental. Thus, the objective of the current work was to evaluate, in a laboratory bioassay, the residual toxicity and effect of imidacloprid, beta-cyfluthrin, and a mixture of both, when applied on canola in the field, on Africanized A. mellifera workers. Three commercial products were applied, formulated with imidacloprid, beta-cyfluthrin, and beta-cyfluthrin + imidacloprid. Each plot received one of the three treatments, in the concentration recommended by the manufacturer, at intervals between 14 and 0 days prior to conducting the bioassays. On the day of the bioassay, the bees were exposed to the plant material containing the treatments for a period of two hours, and were transferred to PVC cages, containing food and water. Mortality assessments were then performed at pre-established intervals until a 96 h post-exposure. Residuals on canola leaves of all tested products caused a significant reduction of honeybee worker longevity, which was less accentuated when the interval after treatment application increased. Safer pest management strategies are needed to ensure the preservation of bees. [ABSTRACT FROM AUTHOR]

Context. In beef cattle populations, there is little evidence regarding the minimum number of genetic markers needed to obtain reliable genomic prediction and imputed genotypes. Aims. This study aimed to evaluate the impact of single nucleotide polymorphism (SNP) marker density and minor allele frequency (MAF), on genomic predictions and imputation performance for high and low heritability traits using the single-step genomic Best Linear Unbiased Prediction methodology (ssGBLUP) in a simulated beef cattle population. Methods. The simulated genomic and phenotypic data were obtained through QMsim software. 735 293 SNPs markers and 7000 quantitative trait loci (QTL) were randomly simulated. The mutation rate (10-5), QTL effects distribution (gamma distribution with shape parameter = 0.4) and minor allele frequency (MAF ≥ 0.02) of markers were used for quality control. A total of 335k SNPs (high density, HD) and 1000 QTLs were finally considered. Densities of 33 500 (35k), 16 750 (16k), 4186 (4k) and 2093 (2k) SNPs were customised through windows of 10, 20, 80 and 160 SNPs by chromosome, respectively. Three marker selection criteria were used within windows: (I) informative markers with MAF values close to 0.5 (HI); (2) less informative markers with the lowest MAF values (LI); (3) markers evenly distributed (ED). We evaluated the prediction of the high-density array and of 12 scenarios of customised SNP arrays, further the imputation performance of them. The genomic predictions and imputed genotypes were obtained with Blupf90 and Flmpute software, respectively, and statistics parameters were applied to evaluate the accuracy of genotypes imputed. The Pearson's correlation, the coefficient of regression, and the difference between genomic predictions and true breeding values were used to evaluate the prediction ability (PA), inflation (b), and bias (d), respectively. Key results. Densities above 16k SNPs using HI and ED criteria displayed lower b, higher PA and higher imputation accuracy. Consequently, similar values of PA, b and d were observed with the use of imputed genotypes. The LI criterion with densities higher than 35k SNPs, showed higher PA and similar predictions using imputed genotypes, however lower b and quality of imputed genotypes were observed. Conclusion. The results obtained showed that at least 5% of HI or ED SNPs available in the HD array are necessary to obtain reliable genomic predictions and imputed genotypes. Implications. The development of low-density customised arrays based on criteria of MAF and even distribution of SNPs, might be a cost-effective and feasible approach to implement genomic selection in beef cattle. [ABSTRACT FROM AUTHOR]

Background: In breeding programmes, the observed genetic change is a sum of the contributions of different selection paths represented by groups of individuals. Quantifying these sources of genetic change is essential for identifying the key breeding actions and optimizing breeding programmes. However, it is difficult to disentangle the contribution of individual paths due to the inherent complexity of breeding programmes. Here we extend the previously developed method for partitioning genetic mean by paths of selection to work both with the mean and variance of breeding values. Methods: First, we extended the partitioning method to quantify the contribution of different paths to genetic variance assuming that the breeding values are known. Second, we combined the partitioning method with the Markov Chain Monte Carlo approach to draw samples from the posterior distribution of breeding values and use these samples for computing the point and interval estimates of partitions for the genetic mean and variance. We implemented the method in the R package AlphaPart. We demonstrated the method with a simulated cattle breeding programme. Results: We show how to quantify the contribution of different groups of individuals to genetic mean and variance and that the contributions of different selection paths to genetic variance are not necessarily independent. Finally, we observed that the partitioning method under the pedigree-based model has some limitations, which suggests the need for a genomic extension. Conclusions: We presented a partitioning method to quantify sources of change in genetic mean and variance in breeding programmes. The method can help breeders and researchers understand the dynamics in genetic mean and variance in a breeding programme. The developed method for partitioning genetic mean and variance is a powerful method for understanding how different selection paths interact within a breeding programme and how they can be optimised. [ABSTRACT FROM AUTHOR]

Background: Recently, crossbred animals have begun to be used as parents in the next generations of dairy and beef cattle systems, which has increased the interest in predicting the genetic merit of those animals. The primary objective of this study was to investigate three available methods for genomic prediction of crossbred animals. In the first two methods, SNP effects from within-breed evaluations are used by weighting them by the average breed proportions across the genome (BPM method) or by their breed-of-origin (BOM method). The third method differs from the BOM in that it estimates breed-specific SNP effects using purebred and crossbred data, considering the breed-of-origin of alleles (BOA method). For within-breed evaluations, and thus for BPM and BOM, 5948 Charolais, 6771 Limousin and 7552 Others (a combined population of other breeds) were used to estimate SNP effects separately within each breed. For the BOA, the purebreds' data were enhanced with data from ~ 4K, ~ 8K or ~ 18K crossbred animals. For each animal, its predictor of genetic merit (PGM) was estimated by considering the breed-specific SNP effects. Predictive ability and absence of bias were estimated for crossbreds and the Limousin and Charolais animals. Predictive ability was measured as the correlation between PGM and the adjusted phenotype, while the regression of the adjusted phenotype on PGM was estimated as a measure of bias. Results: With BPM and BOM, the predictive abilities for crossbreds were 0.468 and 0.472, respectively, and with the BOA method, they ranged from 0.490 to 0.510. The performance of the BOA method improved as the number of crossbred animals in the reference increased and with the use of the correlated approach, in which the correlation of SNP effects across the genome of the different breeds was considered. The slopes of regression for PGM on adjusted phenotypes for crossbreds showed overdispersion of the genetic merits for all methods but this bias tended to be reduced by the use of the BOA method and by increasing the number of crossbred animals. Conclusions: For the estimation of the genetic merit of crossbred animals, the results from this study suggest that the BOA method that accommodates crossbred data can yield more accurate predictions than the methods that use SNP effects from separate within-breed evaluations. [ABSTRACT FROM AUTHOR]

Backgroud: The single nucleotide polymorphisms (SNPs) and copy number variations (CNVs) are two major genomic variants, which play crucial roles in evolutionary and phenotypic diversity. Results: In this study, we performed a comprehensive analysis to explore the genetic variations (SNPs and CNVs) of high sperm motility (HSM) and poor sperm motility (PSM) Simmental bulls using the high-coverage (25×) short-read next generation sequencing and single-molecule long reads sequencing data. A total of ~ 15 million SNPs and 2,944 CNV regions (CNVRs) were detected in Simmental bulls, and a set of positive selected genes (PSGs) and CNVRs were found to be overlapped with quantitative trait loci (QTLs) involving immunity, muscle development, reproduction, etc. In addition, we detected two new variants in LEPR, which may be related to the artificial breeding to improve important economic traits. Moreover, a set of genes and pathways functionally related to male fertility were identified. Remarkably, a CNV on SPAG16 (chr2:101,427,468 − 101,429,883) was completely deleted in all poor sperm motility (PSM) bulls and half of the bulls in high sperm motility (HSM), which may play a crucial role in the bull-fertility. Conclusions: In conclusion, this study provides a valuable genetic variation resource for the cattle breeding and selection programs. [ABSTRACT FROM AUTHOR]

Background: The gilthead sea bream (Sparus aurata) has long been considered resistant to viral nervous necrosis (VNN), until recently, when significant mortalities caused by a reassortant nervous necrosis virus (NNV) strain were reported. Selective breeding to enhance resistance against NNV might be a preventive action. In this study, 972 sea bream larvae were subjected to a NNV challenge test and the symptomatology was recorded. All the experimental fish and their parents were genotyped using a genome-wide single nucleotide polymorphism (SNP) array consisting of over 26,000 markers. Results: Estimates of pedigree-based and genomic heritabilities of VNN symptomatology were consistent with each other (0.21, highest posterior density interval at 95% (HPD95%): 0.1–0.4; 0.19, HPD95%: 0.1–0.3, respectively). The genome-wide association study suggested one genomic region, i.e., in linkage group (LG) 23 that might be involved in sea bream VNN resistance, although it was far from the genome-wide significance threshold. The accuracies (r) of the predicted estimated breeding values (EBV) provided by three Bayesian genomic regression models (Bayes B, Bayes C, and Ridge Regression) were consistent and on average were equal to 0.90 when assessed in a set of cross-validation (CV) procedures. When genomic relationships between training and testing sets were minimized, accuracy decreased greatly (r = 0.53 for a validation based on genomic clustering, r = 0.12 for a validation based on a leave-one-family-out approach focused on the parents of the challenged fish). Classification of the phenotype using the genomic predictions of the phenotype or using the genomic predictions of the pedigree-based, all data included, EBV as classifiers was moderately accurate (area under the ROC curve 0.60 and 0.66, respectively). Conclusions: The estimate of the heritability for VNN symptomatology indicates that it is feasible to implement selective breeding programs for increased resistance to VNN of sea bream larvae/juveniles. Exploiting genomic information offers the opportunity of developing prediction tools for VNN resistance, and genomic models can be trained on EBV using all data or phenotypes, with minimal differences in classification performance of the trait phenotype. In a long-term view, the weakening of the genomic ties between animals in the training and test sets leads to decreased genomic prediction accuracies, thus periodical update of the reference population with new data is mandatory. [ABSTRACT FROM AUTHOR]

The aim of this work was to evaluate the impact of applying genomic information in pedigree uncertainty situations on genetic evaluations for growth- and cow productivity–related traits in Nelore commercial herds. Records for accumulated cow productivity (ACP) and adjusted weight at 450 days of age (W450) were used, as well as genotypes of registered and commercial herd animals, genotyped with the Clarifide Nelore 3.1 panel (~29,000 SNPs). The genetic values for commercial and registered populations were estimated using different approaches that included (ssGBLUP) or did not include genomic information (BLUP), with different pedigree structures. Different scenarios were tested, varying the proportion of young animals with unknown sires (0, 25, 50, 75, and 100%), and unknown maternal grandsires (0, 25, 50, 75, and 100%). The prediction accuracies and abilities were calculated. The estimated breeding value accuracies decreased as the proportion of unknown sires and maternal grandsires increased. The genomic estimated breeding value accuracy using the ssGBLUP was higher in scenarios with a lower proportion of known pedigree when compared to the BLUP methodology. The results obtained with the ssGBLUP showed that it is possible to obtain reliable direct and indirect predictions for young animals from commercial herds without pedigree structure. [ABSTRACT FROM AUTHOR]

Background: Given the economic relevance of fertility and reproductive traits for the beef cattle industry, investigating their genetic background and developing effective breeding strategies are paramount. Considering their late and sex-dependent phenotypic expression, genomic information can contribute to speed up the rates of genetic progress per year. In this context, the main objectives of this study were to estimate variance components and genetic parameters, including heritability and genetic correlations, for fertility, female precocity, and semen production and quality (andrological attributes) traits in Nellore cattle incorporating genomic information. Results: The heritability estimates of semen quality traits were low-to-moderate, while moderate-to-high estimates were observed for semen morphological traits. The heritability of semen defects ranged from low (0.04 for minor semen defects) to moderate (0.30 for total semen defects). For seminal aspect (SMN_ASPC) and bull reproductive fitness (BULL_FIT), low (0.19) and high (0.69) heritabilities were observed, respectively. The heritability estimates for female reproductive traits ranged from 0.16 to 0.39 for rebreeding of precocious females (REBA) and probability of pregnancy at 14 months (PP14), respectively. Semen quality traits were highly genetically correlated among themselves. Moderate-to-high genetic correlations were observed between the ability to remain productive in the herd until four years of age (stayability; STAY) and the other reproductive traits, indicating that selection for female reproductive performance will indirectly contribute to increasing fertility rates. High genetic correlations between BULL_FIT and female reproductive traits related to precocity (REBA and PP14) and STAY were observed. The genetic correlations between semen quality and spermatic morphology with female reproductive traits ranged from -0.22 (REBA and scrotal circumference) to 0.48 (REBA and sperm vigor). In addition, the genetic correlations between REBA with semen quality traits ranged from -0.23 to 0.48, and with the spermatic morphology traits it ranged from -0.22 to 0.19. Conclusions: All male and female fertility and reproduction traits evaluated are heritable and can be improved through direct genetic or genomic selection. Selection for better sperm quality will positively influence the fertility and precocity of Nellore females. The findings of this study will serve as background information for designing breeding programs for genetically improving semen production and quality and reproductive performance in Nellore cattle. [ABSTRACT FROM AUTHOR]

Background: In genomic prediction, it is common to centre the genotypes of single nucleotide polymorphisms based on the allele frequencies in the current population, rather than those in the base generation. The mean breeding value of non-genotyped animals is conditional on the mean performance of genotyped relatives, but can be corrected by fitting the mean performance of genotyped individuals as a fixed regression. The associated covariate vector has been referred to as a 'J-factor', which if fitted as a fixed effect can improve the accuracy and dispersion bias of sire genomic estimated breeding values (GEBV). To date, this has only been performed on populations with a single breed. Here, we investigated whether there was any benefit in fitting a separate J-factor for each breed in a three-way crossbred population, and in using pedigree-based expected or genome-based estimated breed fractions to define the J-factors. Results: For body weight at 7 days, dispersion bias decreased when fitting multiple J-factors, but only with a low proportion of genotyped individuals with selective genotyping. On average, the mean regression coefficients of validation records on those of GEBV increased with one J-factor compared to none, and further increased with multiple J-factors. However, for body weight at 35 days this was not observed. The accuracy of GEBV remained unchanged regardless of the J-factor method used. Differences between the J-factor methods were limited with correlations approaching 1 for the estimated covariate vector, the estimated coefficients of the regression on the J-factors, and the GEBV. Conclusions: Based on our results and in the particular design analysed here, i.e. all the animals with phenotype are of the same type of crossbreds, fitting a single J-factor should be sufficient, to reduce dispersion bias. Fitting multiple J-factors may reduce dispersion bias further but this depends on the trait and genotyping rate. For the crossbred population analysed, fitting multiple J-factors has no adverse consequences and if this is done, it does not matter if the breed fractions used are based on the pedigree-expectation or the genomic estimates. Finally, when GEBV are estimated from crossbred data, any observed bias can potentially be reduced by including a straightforward regression on actual breed proportions. [ABSTRACT FROM AUTHOR]

Background: Dairy cattle production systems are mostly based on purebreds, but recently the use of crossbreeding has received increased interest. For genetic evaluations including crossbreds, several methods based on single-step genomic best linear unbiased prediction (ssGBLUP) have been proposed, including metafounder ssGBLUP (MF-ssGBLUP) and breed-specific ssGBLUP (BS-ssGBLUP). Ideally, models that account for breed effects should perform better than simple models, but knowledge on the performance of these methods is lacking for two-way crossbred cattle. In addition, the differences in the estimates of genetic parameters (such as the genetic variance component and heritability) between these methods have rarely been investigated. Therefore, the aims of this study were to (1) compare the estimates of genetic parameters for average daily gain (ADG) and feed conversion ratio (FCR) between these methods; and (2) evaluate the impact of these methods on the predictive ability for crossbred performance. Methods: Bivariate models using standard ssGBLUP, MF-ssGBLUP and BS-ssGBLUP for the genetic evaluation of ADG and FCR were investigated. To measure the predictive ability of these three methods, we estimated four estimators, bias, dispersion, population accuracy and ratio of population accuracies, using the linear regression (LR) method. Results: The results show that, for both ADG and FCR, the heritabilities were low with the three methods. For FCR, the differences in the estimated genetic parameters were small between the three methods, while for ADG, those estimated with BS-ssGBLUP deviated largely from those estimated with the other two methods. Bias and dispersion were similar across the three methods. Population accuracies for both ADG and FCR were always higher with MF-ssGBLUP than with ssGBLUP, while with BS-ssGBLUP the population accuracy was highest for FCR and lowest for ADG. Conclusions: Our results indicate that in the genetic evaluation for crossbred performance in a two-way crossbred cattle production system, the predictive ability of MF-ssGBLUP and BS-ssGBLUP is greater than that of ssGBLUP, when the estimated variance components are consistent across the three methods. Compared with BS-ssGBLUP, MF-ssGBLUP is more robust in its superiority over ssGBLUP. [ABSTRACT FROM AUTHOR]

Background: In broiler breeding, genotype-by-environment interaction is known to result in a genetic correlation between body weight measured in bio-secure and commercial environments that is substantially less than 1. Thus, measuring body weights on sibs of selection candidates in a commercial environment and genotyping them could increase genetic progress. Using real data, the aim of this study was to evaluate which genotyping strategy and which proportion of sibs placed in the commercial environment should be genotyped to optimize a sib-testing breeding program in broilers. Phenotypic body weight and genomic information were collected on all sibs raised in a commercial environment, which allowed to retrospectively analyze different sampling strategies and genotyping proportions. Results: Accuracies of genomic estimated breeding values (GEBV) obtained with the different genotyping strategies were assessed by computing their correlation with GEBV obtained when all sibs in the commercial environment were genotyped. Results showed that, compared to random sampling (RND), genotyping sibs with extreme phenotypes (EXT) resulted in higher GEBV accuracy across all genotyping proportions, especially for genotyping proportions of 12.5% or 25%, which resulted in correlations of 0.91 vs 0.88 for 12.5% and 0.94 vs 0.91 for 25% genotyped. Including pedigree on birds with phenotype in the commercial environment that were not genotyped increased accuracy at lower genotyping proportions, especially for the RND strategy (correlations of 0.88 vs 0.65 at 12.5% and 0.91 vs 0.80 at 25%), and a smaller but still substantial increase in accuracy for the EXT strategy (0.91 vs 0.79 for 12.5% and 0.94 vs 0.88 for 25% genotyped). Dispersion bias was virtually absent for RND if 25% or more birds were genotyped. However, GEBV were considerably inflated for EXT, especially when the proportion genotyped was low, which was further exacerbated if the pedigree of non-genotyped sibs was excluded. Conclusions: When less than 75% of all animals placed in a commercial environment are genotyped, it is recommended to use the EXT strategy, because it yields the highest accuracy. However, caution should be taken when interpreting the resulting GEBV because they will be over-dispersed. When 75% or more of the animals are genotyped, random sampling is recommended because it yields virtually no bias of GEBV and results in similar accuracies as the EXT strategy. [ABSTRACT FROM AUTHOR]

Recent advancements in genomic technologies have led to the discovery and application of DNA‐markers [e.g. single nucleotide polymorphisms (SNPs)] for the genetic improvement of several aquaculture species. The identification of specific genomic regions associated with economically important traits, using, for example, genome‐wide association studies (GWAS), has allowed the discovery and incorporation of markers linked to quantitative trait loci (QTL) into aquaculture breeding programs through marker‐assisted selection (MAS). However, most of the traits of economic relevance are expected to be controlled by many QTLs, each one explaining only a small proportion of the genetic variation. For traits under polygenic control, prediction of the genetic merit of animals based on the sum of effects at positions across the entire genome (i.e. genomic estimated breeding values, GEBV, which are used for what has become known as genomic selection), has been demonstrated to speed the rate of genetic gain for several traits in aquaculture breeding. The aim of this review was to provide an overview of the development and application of genomic technologies in uncovering the genetic basis of complex traits and accelerating the genetic progress in aquaculture species, as well as providing future perspectives about the deployment of novel molecular technologies for selective breeding in coming years. [ABSTRACT FROM AUTHOR]

Background: Show jumping is one of the most popular disciplines in the horse sector, which makes success in show jumping competitions an important breeding goal for many studbooks. Therefore, the genetic evaluation of show jumping performance is of major interest and this is the case for two Belgian Warmblood studbooks: the Belgian Warmblood horse and Zangersheide. In this study, first an improved phenotype for show jumping performance was developed, i.e. adjusted fence height based on a new non-arbitrary method to scale ranking and competition level, which are two major components of success in competitions. Second, we assessed the importance of including a rider effect in genetic models for show jumping performance, this effect being under debate in sport horse breeding. Third, genetic models based on elementary performances and one model based on a summarized performance were compared in terms of model fit, heritabilities and the stability of estimated breeding values to define the most suitable one for the genetic evaluation of show jumping performance. Results: In this study, more than 600,000 Belgian competition records and almost 81,000 horses were used. Genetic evaluations were developed based on elementary performances (Blom-transformed ranking and adjusted fence height) and on a summarized performance (highest level achieved). Estimated heritabilities of Blom-transformed ranking, adjusted fence height and highest level achieved were 0.09, 0.12 and 0.39, respectively. Including a rider effect improved the models for genetic evaluations. Estimated genetic correlations between the studied models were moderate to high (rg = 0.60–0.99). With the best fit model, the accuracy of the estimated breeding value (EBV) for adjusted fence height reached 0.70 for a larger number of stallions and for stallions that tended to be younger. Conclusions: We recommend breeders to implement this new phenotype 'adjusted fence height' in breeding programs. It is moderately to highly correlated with Blom-transformed ranking and highest level achieved, a proxy for lifetime success, and is available for selection candidates from an early age onwards. [ABSTRACT FROM AUTHOR]

Background: In aquaculture, the proportion of edible meat (FY = fillet yield) is of major economic importance, and breeding animals of superior genetic merit for this trait can improve efficiency and profitability. Achieving genetic gains for fillet yield is possible using a pedigree-based best linear unbiased prediction (PBLUP) model with direct and indirect selection. To investigate the feasibility of using genomic selection (GS) to improve FY and body weight (BW) in rainbow trout, the prediction accuracy of GS models was compared to that of PBLUP. In addition, a genome-wide association study (GWAS) was conducted to identify quantitative trait loci (QTL) for the traits. All analyses were performed using a two-trait model with FY and BW, and variance components, heritability, and genetic correlations were estimated without genomic information. The data used included 14,165 fish in the pedigree, of which 2742 and 12,890 had FY and BW phenotypic records, respectively, and 2484 had genotypes from the 57K single nucleotide polymorphism (SNP) array. Results: The heritabilities were moderate, at 0.41 and 0.33 for FY and BW, respectively. Both traits were lowly but positively correlated (genetic correlation; r = 0.24), which suggests potential favourable correlated genetic gains. GS models increased prediction accuracy compared to PBLUP by up to 50% for FY and 44% for BW. Evaluations were found to be biased when validation was performed on future performances but not when it was performed on future genomic estimated breeding values. Conclusions: The low but positive genetic correlation between fillet yield and body weight indicates that some improvement in fillet yield may be achieved through indirect selection for body weight. Genomic information increases the prediction accuracy of breeding values and is an important tool to accelerate genetic progress for fillet yield and growth in the current rainbow trout population. No significant QTL were found for either trait, indicating that both traits are polygenic, and that marker-assisted selection will not be helpful to improve these traits in this population. [ABSTRACT FROM AUTHOR]

Sustainable poultry production in adverse weather conditions is a widely debated issue, which has led to research into the development of breeds of poultry that are genetically resistant to heat. This study aimed to investigate the effects of heat stress on the genetics of monthly egg production and examine the threshold point of heat stress for preventing thermal stress and its effects on chicken productivity. The data of 5,965 monthly egg production records of 629 Thai native Pradu Hang dum chickens were used for analysis in combination with the temperature-humidity index (THI) calculated by meteorological data near the testing station. The average THI throughout the year was 76.6, and the highest was 82. The THI data were subsequently used to find the threshold point of heat stress. The THI equation used in this study was chosen by its highest correlation (-0.306) between THI values and monthly egg production. At a THI of 74, the lowest -2 logL was found and was considered the threshold point of heat stress. This means that monthly egg production would start decreasing when the THI was 74. Heritability was 0.15±0.03, and genetic and permanent environmental correlations were -0.29 and -0.48, respectively. The threshold point was used to estimate the estimated breeding values (EBVs) of the monthly egg production and heat stress individually, and EBVs were calculated into the selection index. The selection index values when the animal was selected for the replacement herd for all chickens (top 50%, 30%, 20%, and 10%) were 0.14, 0.90, 1.27, 1.53, and 1.91, respectively, and the genetic progress was 0.55, 0.60, 0.68, 0.75, and 0.77, respectively. This shows that the selection index values are lower if there are many selected animals. The recommendation for animal genetic selection is that the top 10% is appropriately because it seems to be most preferred. Therefore, using a selection index for high egg production and heat tolerance in Thai native chickens is possible to achieve genetic assessment in a large population. [ABSTRACT FROM AUTHOR]

Mono-Sex culturing is an important methodology for intensive livestock and poultry production. Here, Hintw was identified as a potential key gene in sex-determination process in chickens via RNA-seq. Then we developed an effective method to interfere or overexpress Hintw in chicken embryos through the intravascular injection. QRT-PCR, ELISA and H&E staining were used to detect the effects of Hintw on gonadal development of chicken embryos. Results showed that Hintw exhibited a female-biased expression pattern in the early stage of PGCs (primordial germ cells) in embryonic gonads. The qRT-PCR analysis showed that Foxl2, Cyp19a1 in females were upregulated under the overexpression of Hintw, while Sox9 and Dmrt1 were downregulated Hintw. Overexpression of Hintw can promote the development of gonadal cortex, while interference with Hintw show the opposite result. Additionally, we found that overexpression of the Hintw in male chicken embryos could inhibit androgen levels and increase estrogen levels. On the other hand, interfering with Hintw in female chicken embryos decreased estrogen levels and increased androgen levels. In conclusion, this work sets the basis for the understanding of the molecular regulatory network for the sex-determination process in chicken embryos as well as providing the theoretical basis for mono-sex culturing of poultry. [ABSTRACT FROM AUTHOR]

This study aimed to investigate the feasibility of genomic prediction for productive and reproductive traits in Guzerá cattle using single-step genomic best linear unbiased prediction (ssGBLUP). Evaluations included the 305-day cumulative yields (first lactation, in kg) of milk, lactose, protein, fat, and total solids; adjusted body weight (kg) at the ages of 450, 365, and 210 days; and age at first calving (in days), from a database containing 197,283 measurements from Guzerá males and females born between 1954 and 2018. The pedigree included 433,823 animals spanning up to 14 overlapping generations. A total of 1618 animals were genotyped. The analyses were performed using ssGBLUP and traditional BLUP methods. Predictive ability and bias were accessed using cross-validation: predictive ability was similar between the methods and ranged from 0.27 to 0.47 for the genomic-based model and from 0.30 to 0.45 for the pedigree-based model; the bias was also similar between the methods, ranging from 0.88 to 1.35 in the genomic-based model and from 0.96 to 1.41 in the pedigree-based model. The individual accuracies of breeding values were evidently increased in the genomic evaluation, with values ranging from 0.41 to 0.56 in the genomic-based model and from 0.26 to 0.54 in the pedigree-based model. Even based on a small number of genotyped animals and a small database for some traits, the results suggest that ssGBLUP is feasible and may be applied to national genetic evaluation of the breed to increase the accuracy of breeding values without greatly impacting predictive ability and bias. [ABSTRACT FROM AUTHOR]

Background: Genotype by environment interactions (G × E) can play an important role in cattle populations and should be included in breeding programs in order to select the best animals for different environments. Objective: The aim of this study was to investigate the G × E for milk production of Gyr cattle in Brazil and Colombia by applying a reaction norm model used genomics information, and to identify genomic regions associated with milk production in the two countries. Methods: The Brazilian and Colombian database included 464 animals (273 cows and 33 sires from Brazil and 158 cows from Colombia) and 27,505 SNPs. A two-trait animal model was used for milk yield adjusted to 305 days in Brazil and Colombia as a function of country of origin, which included genomic information obtained with a single-step genomic reaction norm model. The GIBBS3F90 and POSTGSf90 programs were used. Results: The results obtained indicate G × E based on the reranking of bulls between Brazil and Colombia, demonstrating environmental differences between the two countries. The findings highlight the importance of considering the environment when choosing breeding animals in order to ensure the adequate performance of their progeny. Within this context, the reranking of bulls and the different SNPs associated with milk production in the two countries suggest that G × E is an important effect that should be included in the genetic evaluation of Dairy Gyr cattle in Brazil and Colombia. Conclusion: The Gyr breeding program can be optimized by choosing a selection environment that will allow maximum genetic progress in milk production in different environments within and between countries. [ABSTRACT FROM AUTHOR]

Background: Longitudinal records of temperament can be used for assessing behavioral plasticity, such as aptness to learn, memorize, or change behavioral responses based on affective state. In this study, we evaluated the phenotypic and genomic background of North American Angus cow temperament measured throughout their lifetime around the weaning season, including the development of a new indicator trait termed docility-based learning and behavioral plasticity. The analyses included 273,695 and 153,898 records for yearling (YT) and cow at weaning (CT) temperament, respectively, 723,248 animals in the pedigree, and 8784 genotyped animals. Both YT and CT were measured when the animal was loading into/exiting the chute. Moreover, CT was measured around the time in which the cow was separated from her calf. A random regression model fitting a first-order Legendre orthogonal polynomial was used to model the covariance structure of temperament and to assess the learning and behavioral plasticity (i.e., slope of the regression) of individual cows. This study provides, for the first time, a longitudinal perspective of the genetic and genomic mechanisms underlying temperament, learning, and behavioral plasticity in beef cattle. Results: CT measured across years is heritable (0.38–0.53). Positive and strong genetic correlations (0.91–1.00) were observed among all CT age-group pairs and between CT and YT (0.84). Over 90% of the candidate genes identified overlapped among CT age-groups and the estimated effect of genomic markers located within important candidate genes changed over time. A small but significant genetic component was observed for learning and behavioral plasticity (heritability = 0.02 ± 0.002). Various candidate genes were identified, revealing the polygenic nature of the traits evaluated. The pathways and candidate genes identified are associated with steroid and glucocorticoid hormones, development delay, cognitive development, and behavioral changes in cattle and other species. Conclusions: Cow temperament is highly heritable and repeatable. The changes in temperament can be genetically improved by selecting animals with favorable learning and behavioral plasticity (i.e., habituation). Furthermore, the environment explains a large part of the variation in learning and behavioral plasticity, leading to opportunities to also improve the overall temperament by refining management practices. Moreover, behavioral plasticity offers opportunities to improve the long-term animal and handler welfare through habituation. [ABSTRACT FROM AUTHOR]

Since its introduction in 2001, genomic selection (GS) has progressed rapidly. As a research and application hot topic, GS has led to a revolution in the field of animal and plant breeding. Thanks to its ability to overcome the shortcomings of traditional breeding methods, GS has garnered increasing attention. Both theoretical and practical breeding studies have revealed the higher accuracy of GS than that of traditional breeding, which can accelerate genetic gain. In recent years, many GS studies have been conducted on aquaculture species, which have shown that GS produces higher prediction accuracy than traditional pedigree‐based method. The present study reviews the principles and processes, preconditions, advantages, analytical methods and factors influencing GS as well as the progress of research in aquaculture into these aspects. Furthermore, future directions of GS in aquaculture are also discussed, which should expand its application to more aquaculture species. [ABSTRACT FROM AUTHOR]

Background: The effect of the cecal microbiome on growth of rabbits that were fed under different regimes has been studied previously. However, the term "effect" carries a causal meaning that can be confounded because of potential genetic associations between the microbiome and production traits. Structural equation models (SEM) can help disentangle such a complex interplay by decomposing the effect on a production trait into direct host genetics effects and indirect host genetic effects that are exerted through microbiota effects. These indirect effects can be estimated via structural coefficients that measure the effect of the microbiota on growth while the effects of the host genetics are kept constant. In this study, we applied the SEM approach to infer causal relationships between the cecal microbiota and growth of rabbits fed under ad libitum (ADGAL) or restricted feeding (ADGR). Results: We identified structural coefficients that are statistically different from 0 for 138 of the 946 operational taxonomic units (OTU) analyzed. However, only 15 and 38 of these 138 OTU had an effect greater than 0.2 phenotypic standard deviations (SD) on ADGAL and ADGR, respectively. Many of these OTU had a negative effect on both traits. The largest effects on ADGR were exerted by an OTU that is taxonomically assigned to the Desulfovibrio genus (− 1.929 g/d, CSS-normalized OTU units) and by an OTU that belongs to the Ruminococcaceae family (1.859 g/d, CSS-normalized OTU units). For ADGAL, the largest effect was from OTU that belong to the S24-7 family (− 1.907 g/d, CSS-normalized OTU units). In general, OTU that had a substantial effect had low to moderate estimates of heritability. Conclusions: Disentangling how direct and indirect effects act on production traits is relevant to fully describe the processes of mediation but also to understand how these traits change before considering the application of an external intervention aimed at changing a given microbial composition by blocking/promoting the presence of a particular microorganism. [ABSTRACT FROM AUTHOR]

Single-step genomic best linear unbiased predictor (ssGBLUP) is a methodology for estimating breeding values jointly for genotyped and non-genotyped animals. Since its development in the early 2010s, ssGBLUP faced challenges like modelling missing pedigrees, efficiently computing accuracies, ensuring the compatibility between genomic and pedigree information, implementing large-scale genetic evaluations, and using non-genotyped animals for genome-wide association studies, among others. Because of the extensive research and the availability of efficient software packages, those challenges for ssGBLUP were solved. Nowadays, ssGBLUP is the chosen methodology estimating values in almost all livestock populations. This review aims to report the progress of ssGBLUP, outline the current state of the art, and hypothesise about the future of this methodology. Single-step genomic BLUP is the most popular methodology for genetic evaluations including genotyped and non-genotyped animals. The development of theories and efficient software allows to use single-step for virtually any real dataset. Continuous research in single-step will allow the use of massive amount of data like video recording, omics, among others. [ABSTRACT FROM AUTHOR]

The aim of the present study was to develop a model to predict muscularity and body condition score (BCS) during the lactation of Italian Simmental dairy cows in Emilia Romagna herds. A total of 2656 Italian Simmental primiparous cows from 324 dairy herds were linear classified between 2002 and 2020. Lactation curves for muscularity and BCS were modelled for each cow using random regression model. The model included the fixed effects of age at linear scoring and days in milk modelled with a Legendre polynomial, and the random effects of herd-year of classification, cow and days in milk for each cow modelled with Legendre polynomials. The most parsimonious model included a fixed cubic Legendre polynomial and a random linear polynomial for cow effects. Results indicated that, on an average, BCS nadir was anticipated to that of muscularity, and, in both cases, this moment was around the lactation peak, when animals have the greatest nutrients requirement. After this period, both BCS and muscularity recovered up to post-partum levels. Moreover, after the 9 month of lactation, the absolute growth rate of muscularity and BCS was negative, suggesting that late-gestating cows could potentially enter a phase of body conformation loss. Results reported in the current research indicate that random regression using Legendre polynomials can be successfully employed to predict muscularity and BCS during the lactation of dairy cows. Modelling dairy cows' muscularity and BCS allows to use these parameters as indicator traits for functionality in dairy cows. The use of prediction model of muscularity and BCS allows to understand the evolution of these conformation traits during the lactation. The analysis of muscularity and BCS allows to assess health and welfare status of dairy cows, which is essential to maximise production performances. [ABSTRACT FROM AUTHOR]

Key Message: In genomic recurrent selection, the more markers, the better because they buffer the linkage disequilibrium losses caused by recombination over cycles, and consequently, provide higher responses to selection. Reductions of genotyping marker density have been extensively evaluated as potential strategies to reduce the genotyping costs of genomic selection (GS). Low-density marker panels are appealing in GS because they entail lower multicollinearity and computing time and allow more individuals to be genotyped for the same cost. However, statistical models used in GS are usually evaluated with empirical data, using "static" training sets and populations. This may be adequate for making predictions during a breeding program's initial cycles but not for the long-term. Moreover, studies that focus on long selective breeding cycles generally do not consider GS models with the effect of dominance, which is particularly important for breeding outcomes in cross-pollinated crops. Hence, dominance effects are important and unexplored in GS for long-term programs involving allogamous species. To address it, we employed two approaches: analysis of empirical maize datasets and simulations of long-term breeding applying phenotypic and genomic recurrent selection (intrapopulation and reciprocal schemes). In both schemes, we simulated twenty breeding cycles and assessed the effect of marker density reduction on the population mean, the best crosses, additive variance, selective accuracy, and response to selection with models [additive, additive-dominant, general (GCA), and this plus specific combining ability (GCA + SCA)]. Our results indicate that marker reduction based on linkage disequilibrium levels provides useful predictions only within a cycle, as accuracy significantly decreases over cycles. In the long-term, without training set updating, high-marker density provides the best responses to selection. The model to be used depends on the breeding scheme: additive for intrapopulation and additive-dominant or GCA + SCA for reciprocal. [ABSTRACT FROM AUTHOR]

Sheep milk production is incipient in Mexico with scarce knowledge on the performance of dairy ewes from different breeds. The objective of this study was to evaluate the effect of breed (Awassi (Aw), East Friesian (EF) and other (Ot)), parity number (1, 2 and 3 or more (+ 3)), litter size (1 and 2 or more (+ 2)) and lambing season (spring–summer (SS) and autumn–winter (AW)) on day of peak yield (DP), peak yield (PY), persistency (P), total milk yield (TMY), 305-day milk yield (TMY305d), 150-day milk yield (TMY150d) and lactation length (LL) of crossbred dairy ewes in a flock of the central highlands of Mexico. A total of 4312 weekly milk yield records collected from 2014 to 2015 were used to model 133 lactations using a random regression model with a fifth-order orthogonal polynomial. Flock mean values of curve parameters were 42 days at DP, 1.2 kg/day at PY, − 3.5 g/day of P, 190 kg TMY, 189 kg TMY305, 124 kg TMY150 and 269 days of LL. Multiparous ewes had significantly higher (P < 0.05) PY and TMY than primiparous ewes. Ewes that lambed in AW had 15% higher PY and produced 14% more TMY than ewes that lambed in SS (P < 0.05). Correlations among curve parameters were significant except for the correlation between PY and LL and between P and TMY150d. TMY was strongly correlated with LL (0.91). Predominantly Awassi crossbred ewes had lower curve parameter values than predominantly East Friesian and other crossbred ewes. [ABSTRACT FROM AUTHOR]

In unstructured dairy programs, pedigree is usually shallow, which leads to biased prediction of breeding values using best linear unbiased prediction (BLUP). The objective of this study was to come out with a genomic prediction strategy that can utilize shallow pedigree information and predict unbiased and more accurate GEBV for sex-limited traits in a small population using single-step GBLUP (ssGBLUP). The data and models for a population under selection were simulated. Out of current 10 generations, 10th generation with 1000 candidates served as validation population. For the complete pedigree scenario, pedigree (P)BLUP estimated breeding values (EBV) were unbiased with accuracy (r) of 0.35 ± 0.02 and 0.26 ± 0.01 for 0.3 and 0.1 h2 scenario, respectively. For the shallow pedigree, biased prediction of breeding values and low accuracies were obtained with linear decline in the accuracy of EBV for removal of information on more distant pedigree. Accuracy and bias (ρ) for scenario with removing 4 distant generations from pedigree were 0.30 ± 0.02 and 0.55 ± 0.03, respectively, in moderate h2 scenario. Use of Genomic (G)BLUP, especially with “extreme phenotypic contrast selective genotyping,” (TB) resulted in higher accuracy for a small reference of females; however, GEBV were highly biased. We observed that ssGBLUPF, where the numerator relationship matrix is corrected for inbreeding, resulted in more accurate and unbiased estimates of GEBV across shallow pedigree scenario, with TB all female reference (missing 4 distant generations: r = 0.50 ± 0.02; ρ = 0.96 ± 0.02). We recommend use of ssGBLUPF with two tailed selectively genotyped all female reference in shallow pedigree scenarios, to obtain unbiased and accurate GEBV for sex-limited traits, when resources are limited. [ABSTRACT FROM AUTHOR]

Animal feeding is a critical factor in increasing producer profitability. Improving feed efficiency can help reduce feeding costs and reduce the environmental impact of beef production. Candidate genes previously identified for this trait in differential gene expression studies (e.g., case–control studies) have not examined continuous gene-phenotype variation, which is a limitation. The aim of this study was to investigate the association between the expression of five candidate genes in the liver, measured by quantitative real-time PCR and feed-related traits. We adopted a linear mixed model to associate liver gene expression from 52 Nelore steers with the following production traits: average daily gain (ADG), body weight (BW), dry matter intake (DMI), feed conversion ratio (FCR), feed efficiency (FE), Kleiber index (KI), metabolic body weight (MBW), residual feed intake (RFI), and relative growth ratio (RGR). The total expression of the prune homolog 2 (PRUNE2) gene was significantly associated with DMI, FCR, FE, and RFI (P < 0.05). Furthermore, we have identified a new transcript of PRUNE2 (TCONS_00027692, GenBank MZ041267) that was inversely correlated with FCR and FE (P < 0.05), in contrast to the originally identified PRUNE2 transcript. The cytochrome P450 subfamily 2B (CYP2B6), early growth response protein 1 (EGR1), collagen type I alpha 1 chain (COL1A1), and connective tissue growth factor (CTGF) genes were not associated with any feed efficiency-related traits (P > 0.05). The findings reported herein suggest that PRUNE2 expression levels affects feed efficiency-related traits variation in Nelore steers. [ABSTRACT FROM AUTHOR]

Background: Selection for feed efficiency is one of the best ways to decrease poultry production costs and environmental impacts. While literature on its genetic determinism is abundant, it is limited to one or a few periodic values over the animals’ lifespans. With the development of new phenotyping tools, kinetics of growth and feed intake are now available, providing access to daily data on feed efficiency. In this study, over the course of 6 weeks, we described the kinetics of body weight (BW), average daily weight gain (ADG), feed intake (FI), and daily cumulative feed conversion ratio (DCFCR) using electronic feed stations. We then estimated the genetic parameters of daily data in two fast growing lines of chicken divergently selected for breast meat ultimate pH (heritability and genetic correlations with breast meat yield and pH). Results: Birds from the line selected to have a more acidic meat (pHu-), were more efficient than those selected to have a less acidic meat (pHu+), with a 4.3% higher BW from d7 to d29 and 5.0% better feed efficiency from d12 to slaughter. The line effect for ADG and DCFCR appeared to be significant as early as d5, which is consistent with the early age at which metabolic differences between the two lines appear. Genetic parameters estimated within each line revealed different genetic determinisms of growth and feed efficiency, with a higher impact of maternal effects on BW during the growing phase (d10 to d20) in the pHu+ line and much higher heritability values of DCFCR during the finishing phase (d26-d42) in the pHu- line. Conclusion: Genetic profiles of daily performance highlighted the difference between both lines. Their behavior during dietary transitions reinforced the already known impact of these periods in the animals’ lives. Based on the profiles of genetic parameters within each line, it seems feasible to identify early criteria for selecting feed efficiency, but they must be defined for each line, as the genetic determinism of these traits is line-dependent. [ABSTRACT FROM AUTHOR]

Background: Potential functional variants (PFVs) can be defined as genetic variants responsible for a given phenotype. Ultimately, these are the best DNA markers for animal breeding and selection, especially for polygenic and complex phenotypes. Herein, we described the identification of PFVs for complex phenotypes (in this case, Feed Efficiency in beef cattle) using a systems-biology driven approach based on RNA-seq data from physiologically relevant organs. Results: The systems-biology coupled with deep molecular phenotyping by RNA-seq of liver, muscle, hypothalamus, pituitary, and adrenal glands of animals with high and low feed efficiency (FE) measured by residual feed intake (RFI) identified 2,000,936 uniquely variants. Among them, 9986 variants were significantly associated with FE and only 78 had a high impact on protein expression and were considered as PFVs. A set of 169 significant uniquely variants were expressed in all five organs, however, only 27 variants had a moderate impact and none of them a had high impact on protein expression. These results provide evidence of tissue-specific effects of high-impact PFVs. The PFVs were enriched (FDR < 0.05) for processing and presentation of MHC Class I and II mediated antigens, which are an important part of the adaptive immune response. The experimental validation of these PFVs was demonstrated by the increased prediction accuracy for RFI using the weighted G matrix (ssGBLUP+wG; Acc = 0.10 and b = 0.48) obtained in the ssGWAS in comparison to the unweighted G matrix (ssGBLUP; Acc = 0.29 and b = 1.10). Conclusion: Here we identified PFVs for FE in beef cattle using a strategy based on systems-biology and deep molecular phenotyping. This approach has great potential to be used in genetic prediction programs, especially for polygenic phenotypes. [ABSTRACT FROM AUTHOR]

Background: By entering the era of mega-scale genomics, we are facing many computational issues with standard genomic evaluation models due to their dense data structure and cubic computational complexity. Several scalable approaches have been proposed to address this challenge, such as the Algorithm for Proven and Young (APY). In APY, genotyped animals are partitioned into core and non-core subsets, which induces a sparser inverse of the genomic relationship matrix. This partitioning is often done at random. While APY is a good approximation of the full model, random partitioning can make results unstable, possibly affecting accuracy or even reranking animals. Here we present a stable optimisation of the core subset by choosing animals with the most informative genotype data. Methods: We derived a novel algorithm for optimising the core subset based on a conditional genomic relationship matrix or a conditional single nucleotide polymorphism (SNP) genotype matrix. We compared the accuracy of genomic predictions with different core subsets for simulated and real pig data sets. The core subsets were constructed (1) at random, (2) based on the diagonal of the genomic relationship matrix, (3) at random with weights from (2), or (4) based on the novel conditional algorithm. To understand the different core subset constructions, we visualise the population structure of the genotyped animals with linear Principal Component Analysis and non-linear Uniform Manifold Approximation and Projection. Results: All core subset constructions performed equally well when the number of core animals captured most of the variation in the genomic relationships, both in simulated and real data sets. When the number of core animals was not sufficiently large, there was substantial variability in the results with the random construction but no variability with the conditional construction. Visualisation of the population structure and chosen core animals showed that the conditional construction spreads core animals across the whole domain of genotyped animals in a repeatable manner. Conclusions: Our results confirm that the size of the core subset in APY is critical. Furthermore, the results show that the core subset can be optimised with the conditional algorithm that achieves an optimal and repeatable spread of core animals across the domain of genotyped animals. [ABSTRACT FROM AUTHOR]

Background: Bovine paratuberculosis, or Johne's disease (JD), is a contagious and incurable disease caused by Mycobacterium avium subsp. paratuberculosis (MAP). It has adverse effects on animal welfare and is very difficult to control, leading to serious economic consequences. An important line of defense to this disease is host genetic resistance to MAP, which, when it will be more fully understood, could be improved through selective breeding. Using a large dataset of Holstein cows (161,253 animals including 56,766 cows with ELISA serological phenotypes and 12,431 animals with genotypes), we applied a single-step single nucleotide polymorphism (SNP) best linear unbiased prediction approach to investigate the genetic determinism underlying resistance to this disease (heritability estimate and identification of relevant genomic regions) and estimated genetic trends, reliability, and relative risk factors associated with genomic predictions. Results: Resistance to JD was moderately heritable (0.14) and 16 genomic regions were detected that accounted for at least 0.05% of the breeding values variance (GV) in resistance to JD, and were located on chromosomes 1, 3, 5, 6, 7, 19, 20, 21, 23, 25, and 27, with the highest percentage of variance explained by regions on chromosomes 23 (0.36% GV), 5 (0.22% GV), 1 (0.14% GV), and 3 (0.13% GV). When estimated for the whole chromosomes, the autosomes with the largest overall contributions were chromosomes 3 (5.3% GV), 10 (4.8%), 23 (4.7%), 1 (3.6%), 7 (3.4%), 5 (2.9%), 12 (2.5%), 11 (2.2%), and 13 (2%). We estimated a slightly favorable genetic trend in resistance to JD over the last two decades, which can be explained by a low positive genetic correlation between resistance to JD and total merit index (+ 0.06). Finally, in a validation population of 907 cows, relatively reliable genomic predictions (reliability = 0.55) were obtained, which allowed the identification of cows at high risk of infection. Conclusions: This study provides new insights into the genetic determinism of resistance to JD and shows that this trait can be predicted from SNP genotypes. It has led to the implementation of a single-step genomic evaluation that should rapidly become an effective tool for controlling paratuberculosis on French Holstein farms. [ABSTRACT FROM AUTHOR]

Background: Although single-step GBLUP (ssGBLUP) is an animal model, SNP effects can be backsolved from genomic estimated breeding values (GEBV). Predicted SNP effects allow to compute indirect prediction (IP) per individual as the sum of the SNP effects multiplied by its gene content, which is helpful when the number of genotyped animals is large, for genotyped animals not in the official evaluations, and when interim evaluations are needed. Typically, IP are obtained for new batches of genotyped individuals, all of them young and without phenotypes. Individual (theoretical) accuracies for IP are rarely reported, but they are nevertheless of interest. Our first objective was to present equations to compute individual accuracy of IP, based on prediction error covariance (PEC) of SNP effects, and in turn, are obtained from PEC of GEBV in ssGBLUP. The second objective was to test the algorithm for proven and young (APY) in PEC computations. With large datasets, it is impossible to handle the full PEC matrix, thus the third objective was to examine the minimum number of genotyped animals needed in PEC computations to achieve IP accuracies that are equivalent to GEBV accuracies. Results: Correlations between GEBV and IP for the validation animals using SNP effects from ssGBLUP evaluations were ≥ 0.99. When all available genotyped animals were used for PEC computations, correlations between GEBV and IP accuracy were ≥ 0.99. In addition, IP accuracies were compatible with GEBV accuracies either with direct inversion of the genomic relationship matrix (G) or using the algorithm for proven and young (APY) to obtain the inverse of G. As the number of genotyped animals included in the PEC computations decreased from around 55,000 to 15,000, correlations were still ≥ 0.96, but IP accuracies were biased downwards. Conclusions: Theoretical accuracy of indirect prediction can be successfully obtained by computing SNP PEC out of GEBV PEC from ssGBLUP equations using direct or APY G inverse. It is possible to reduce the number of genotyped animals in PEC computations, but accuracies may be underestimated. Further research is needed to approximate SNP PEC from ssGBLUP to limit the computational requirements with many genotyped animals. [ABSTRACT FROM AUTHOR]

Background: Early simulations indicated that whole-genome sequence data (WGS) could improve the accuracy of genomic predictions within and across breeds. However, empirical results have been ambiguous so far. Large datasets that capture most of the genomic diversity in a population must be assembled so that allele substitution effects are estimated with high accuracy. The objectives of this study were to use a large pig dataset from seven intensely selected lines to assess the benefits of using WGS for genomic prediction compared to using commercial marker arrays and to identify scenarios in which WGS provides the largest advantage. Methods: We sequenced 6931 individuals from seven commercial pig lines with different numerical sizes. Genotypes of 32.8 million variants were imputed for 396,100 individuals (17,224 to 104,661 per line). We used BayesR to perform genomic prediction for eight complex traits. Genomic predictions were performed using either data from a standard marker array or variants preselected from WGS based on association tests. Results: The accuracies of genomic predictions based on preselected WGS variants were not robust across traits and lines and the improvements in prediction accuracy that we achieved so far with WGS compared to standard marker arrays were generally small. The most favourable results for WGS were obtained when the largest training sets were available and standard marker arrays were augmented with preselected variants with statistically significant associations to the trait. With this method and training sets of around 80k individuals, the accuracy of within-line genomic predictions was on average improved by 0.025. With multi-line training sets, improvements of 0.04 compared to marker arrays could be expected. Conclusions: Our results showed that WGS has limited potential to improve the accuracy of genomic predictions compared to marker arrays in intensely selected pig lines. Thus, although we expect that larger improvements in accuracy from the use of WGS are possible with a combination of larger training sets and optimised pipelines for generating and analysing such datasets, the use of WGS in the current implementations of genomic prediction should be carefully evaluated against the cost of large-scale WGS data on a case-by-case basis. [ABSTRACT FROM AUTHOR]

Context: Large-scale genetic evaluation is promising for efficiently improving sow lifetime productivity, and therefore, a reasonable operational model should be pursued to analyse phenotypic data collected from around Japan, where unique seasonality exists. However, the information on establishing the model is currently insufficient. Aims: To obtain the fundamental information on using ambient temperature information in developing the model for routine swine genetic evaluation in Japan, by analysing total number born, number born alive, and number stillborn collected at a Japanese farm, together with off-farm ambient temperature measured at the nearest Automated Meteorological Data Acquisition System station. Methods: Five repeatability animal models were exploited, considering the effects of farrowing season (Model 1), farrowing month (Model 2), quadratic regressions of daily maximum ambient temperature of farrowing day (Model 3), season and temperature (Model 4), or month and temperature (Model 5). Key results: Patterns of the effects of daily maximum temperature of farrowing day estimated using Model 3 were similar to those of farrowing season by Model 1 and those of farrowing month by Model 2. Adding the effect of daily maximum temperature of farrowing day (Models 4 and 5) could explain phenotypic variability better than only considering either of farrowing season or month (Models 1 and 2). Estimated heritability was stable among the models and the rank correlation of predicted breeding values among models was >0.98 for all traits. Conclusions: The results indicated the possibility that using public ambient temperature can capture a large part of the phenotypic variability in litter-size traits at birth caused by seasonality in Japan. Implications: This study could support the availability of public meteorological data in the development of flexible operational models for future swine genetic evaluation in Japan. Large-scale national genetic evaluation in Japan, where unique seasonality exists, is promising for efficiently improving sow lifetime productivity. We analysed litter-size traits at birth from a farm in Japan, together with off-farm ambient temperature measured at a nearby weather station, showing that using ambient temperature captured a large part of the phenotypic variability caused by seasonality. The results imply that public meteorological data are useful in developing better operational models for swine genetic evaluation in Japan. [ABSTRACT FROM AUTHOR]