Search

Natural yellow plant dyes and traditional medicines were used widely on historical papers in ancient China for religious reasons and conservation considerations. This study aims to evaluate some traditional yellow botanical sources of dyes that contain different chemical colorant compositions in order to understand their effects on the properties of traditional handmade paper. The physical and chemical changes in paper specimens treated with plant dyes were studied by examining properties such as the color, pH, thermogravimetric (TG) characteristics, tensile strength, folding endurance and microstructure by scanning electron microscopy (SEM). The results indicated that different colorants had different toning effects and that the main components, including carboxyl and ketone groups, could affect the paper stability at high temperatures. The results also revealed that the mechanical properties of paper specimens were improved after treatment with plant dyes. The significant improvements in the tensile strength and folding endurance and the slightly higher decomposition temperature of Amur cork tree-dyed paper could be ascribed to the strong interaction between the colorants' main components and the fibers. The scientific evaluation of the property changes is therefore valuable information for weighing the advantages and disadvantages of the various yellow toning materials for paper conservation treatment. [ABSTRACT FROM AUTHOR]

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Publishing English papers in journals listed in Science Citation Index (SCI) has become a requirement for degree conferment for doctoral science students at many universities in China. The publication requirement engenders high pressure for doctoral students and their supervisors and shapes the politics of the relationship between the two parties. This is illustrated in the present paper which reports a study conducted at a prestigious university in east China. Focusing on the case of a research group in biochemistry led by an expert writer (the supervisor), the study aimed to find out, from the supervisor's perspective, what revising papers for the students means to him, and what the students learn as a result of their papers being revised. It is shown that the students depend on the supervisor to meet the publication requirement, and the supervisor believes an average student cannot write a publishable paper. The paper discusses the disempowering effect of the publication requirement, and concludes that there is a role for a course on academic English writing, and that the focus on "publishing SCI papers or no degree" should be shifted at the policy level and long-term planning should go into the training of EAP-qualified language professionals.

There are many important cultural relics in China, including many paper relics. Therefore, it is particularly important to find methods of protecting the handwriting in paper relics. This study focuses on the effects acrylic polyurethane materials have on preserving handwriting in paper relics by examining the color change and diffusion of handwriting before and after reinforcement treatments on handwriting materials, including ink, carbon ink, blue-black ink, pure blue ink, red ink, and pencil. The acrylic polyurethane materials have a certain degree of stability and enhance the handwriting of paper relics. We analyzed the acrylic polyurethane reinforcement material in terms of acid resistance, alkali resistance, oxidation resistance, dry heat aging resistance, and durability. The experimental results show that the optimal reinforcement concentration is within 15% for ink, 10% for carbon ink, 20% for blue-black ink, 15% to 20% for pure blue ink, and 3% for red ink and pencil. Finally, the surface of the reinforced paper and handwriting were observed through laser microscopy, SEM, EDS, and infrared spectroscopy and the protective effect of acrylic polyurethane reinforcement material on handwriting was determined. [ABSTRACT FROM AUTHOR]

In China, Xuan paper has been the paper of choice as artwork support and for conservation, for several centuries. However, little is known about its material properties, especially given the many grades of sized and unsized Xuan paper. In addition, there is a lack of information on its degradation. In this research, a selection of contemporary unsized Xuan papers was investigated, representing diverse raw materials. Seven out of twelve contemporary unsized Xuan papers were determined to be approximately neutral and contain > 2% alkaline reserve, indicating good durability. Viscometry was used to determine the degree of polymerisation (DP) as none of the samples gave significant reactions to the phloroglucinol spot test. The average DP of ten contemporary unsized Xuan papers is ~ 1700, excluding two papers that have presumably been sun-bleached, and that exhibit significantly lower DP. Using X-ray fluorescence, it can be demonstrated that Ca and Si are the dominant elements and interestingly, Ca content is directly correlated with ash content and with alkaline reserve. Accelerated degradation was performed at two sets of environmental conditions, i.e. 90 °C, 30% RH and 60 °C, 70% RH, and the established degradation rates agreed with the Collections Demography model of paper degradation meaning that degradation of Xuan papers proceeds in the same way as other types of paper. This research gives fundamental insights into contemporary unsized Xuan papers, which exhibit good stability during accelerated degradation despite the low starting DP in the context of the samples used in this study. Our findings may inform methods of Xuan paper production, selection of Xuan paper for conservation purposes, as well as preventive conservation of Xuan paper-based artefacts. [ABSTRACT FROM AUTHOR]

Publications in Renal Failure in Science Citation Index Expanded (SCI-EXPANDED) between 1992 and 2021 were analyzed. Six publication indicators: total, independent, collaborative, first author, corresponding author, and single author publications as well as their related citation indicators, were used to compare performances of countries, institutes, and authors. Comparison of the highly cited papers and journal's impact factor (IF) contributors was discussed. In addition, the main research topics in the journal were presented. Results show that China published the most total articles and reviews, as well as the first-author papers and corresponding-author papers in the journal. The Chang Gung Memorial Hospital in Taiwan ranked the top in five publication indicators: total, single-institution, inter-institutionally collaborative, first author, and corresponding-author papers. A low percentage of productive authors emerged as a journal IF contributor. Similarly, only a limited relationship between highly cited papers and IF contributing papers was found. Publications related to hemodialysis, chronic kidney disease, and acute kidney injury were the most popular topic, while meta-analysis was new focus in the last decade in the journal. [ABSTRACT FROM AUTHOR]

Electronic waste is always a big problem when it comes to the disposal of electronic appliances, and they pose a significant threat ecologically. New technology replaces the existing one, and the older one is discarded. Biodegradable electronics, as an emerging research area, gives viable solutions to the problem of E-waste. It mainly deals with the development of transient electronic devices, i.e., getting decomposed gradually or dissolvable in an eco-friendly way when their purpose has been achieved. This paper presents a scientometric analysis of the research in biodegradable electronics by employing a Scopus database of more than 1109 research articles, conference papers, review papers, and books published on this topic. This study is done over two decades of data from 2003 to 2023 on biodegradable electronics. It describes the trends and future of the research area using keyword analysis, citation network, and bibliometric tools. The study of the number of papers shows a 68%, 75%, and 55% increase in research articles, conference papers, and review documents in 2022. The country-wise contribution to the research shows that China, the USA, India, and South Korea are the major contributing nations. China is the most productive nation, with 297 publications. This paper reveals that the research area has increased the interest of researchers, and countries are collaborating to achieve sustainable development goals. The bibliometric analysis identifies various challenges to biodegradable electronics, such as degradation diversity, integration, fabrication and scalability. Based on these, the future aspects of biodegradable electronics are identified in organic bioelectronics, soft electronics, novel fabrication mechanisms, and Innovative chemistry for green electronics. This study will aid academia, researchers and government agencies in exploring biodegradable electronics with multifaceted society-wide applications. [ABSTRACT FROM AUTHOR]

Using a panel data set from 2007 to 2019, we empirically evaluate the impact of carbon capture, utilization, and storage (CCUS) technology innovation on green total factor productivity (GTFP). The findings show that (1) CCUS technology innovation significantly improves GTFP. (2) CCUS technology innovation significantly contributes to GTFP by promoting industrial structure upgrading and carbon emissions efficiency. (3) Environmental regulation plays a positive moderating role in the nexus between CCUS technology innovation and GTFP. The findings of this paper provide guidance for China to achieve green energy transition and build a green energy system. [ABSTRACT FROM AUTHOR]

Background: Personalised medicine (PM) has been fostered by technological and medical advances, but all stakeholders, including healthcare professionals, citizens and policy makers, should achieve adequate health literacy to promote PM implementation. The "Integrating China in the International Consortium for Personalised Medicine" (IC2PerMed) project, funded by the International Consortium for Personalised Medicine, focuses on this issue by highlighting the need to educate healthcare professionals and empower citizens. Within the aforementioned project, building on a mapping of European and Chinese policies in PM, experts in the field of PM participated in an online workshop and a following two-round Delphi survey, in order to identify the priority areas of intervention for healthcare professionals' education and curricula, engagement and empowerment of citizens and patients., Results: Nine experts completed the survey and reached a consensus on seventeen priorities: seven were related to health professionals' education and curricula, whereas ten on citizen and patients' awareness and empowerment., Conclusion: These priorities emphasized the importance of education and health literacy, multidisciplinary and international collaboration, public trust, and consideration of ethical, legal, and social issues. The present experience highlights the relevance of the involvement of stakeholders in informing decision-makers, developing appropriate national plans, strategies, and policies, and ensuring the adequate implementation of PM in health systems., (© 2023. The Author(s).)

Corrugating medium was made from the solid waste of bamboo paper sludge and old corrugated container (OCC) pulp. The medium also incorporated additions of anion polyacrylamide as a retention agent and cationic starch as a strengthening agent. The estimated molecular mass of anion polyacrylamide, the addition level of anionic polyacrylamide, and the addition level of cationic starch were optimally designed using singlefactor analysis. On this premise, the optimum addition level of the solid waste of bamboo paper sludge was found. The best process conditions for the corrugating medium included a base weight of 120 g/m-2, 10 wt.% bamboo paper sludge solid waste, 0.3 wt.% APAM (Estimated molecular mass of 600 × 104 Daltons), and 1.5 wt.% cationic starch. The apparent density, breaking length, and ring crush index were 0.53 g/cm-3, 2.51 km, and 7.48 N/mg-1, respectively, under the best process conditions. This finding could help satisfy the demand for materials used for making the corrugating medium and could support the full utilization of the solid waste of bamboo paper sludge to achieve higher value. [ABSTRACT FROM AUTHOR]

Objective: To analyze the characteristics of scientific papers in the field of global liver diseases published by Chinese scholars that were retracted for diverse reasons from the Retraction Watch database, so as to provide a reference to publishing-related papers. Methods: The Retraction Watch database was retrieved for retracted papers in the field of global liver disease published by Chinese scholars from March 1, 2008 to January 28, 2021. The regional distribution, source journals, reasons for retraction, publication and retraction times, and others were analyzed. Results: A total of 101 retracted papers that were distributed across 21 provinces/cities were retrieved. Zhejiang area ( n = 17) had the most retracted papers, followed by Shanghai ( n = 14), and Beijing ( n = 11). The vast majority were research papers ( n = 95). The journal PLoS One had the highest number of retracted papers. In terms of time distribution, 2019 ( n = 36) had the most retracted papers. 23 papers, accounting for 8.3% of all retractions, were retracted owing to journal or publisher concerns. Liver cancer (34%), liver transplantation (16%), hepatitis (14%), and others were the main areas of retracted papers. Conclusion: Chinese scholars have a large number of retracted articles in the field of global liver diseases. A journal or publisher chooses to retract a manuscript after investigating and discovering more flawed problems, which, however, require further support, revision, and supervision from the editorial and academic circles.

A study is reported of the performance and attainment of 32 students from overseas studying elementary Chinese as a foreign language (CFL) in a Chinese university. With an AB-BA design, they were asked to use two forms of writing media to present two essays: one a word-processed essay entitled "My Favourite Female" and the other a conventional hand-written essay entitled "My Favourite Male". The essays were marked by experienced Chinese language experts and the learners' impression of using each type of writing medium was gathered via questionnaires and interviews. Inferential statistics showed that the students performed significantly better when using a word-processor, and they thought that completing writing tasks using pencil-and-paper and word-processors were markedly different. Most of them felt that their work was more professional when produced on a word-processor. A small number of students considered that writing by hand in Chinese was aesthetically pleasing, but they appreciated the convenience of writing in words spelled and written correctly by the computer. Inter-marker consistency was more homogeneous for essays written on the computer. In conclusion, word-processors are suggested as the preferred writing medium for beginning learners of CFL.

Using CiteSpace to draw a keyword co-occurrence knowledge map for 1,048 research papers on the quality of higher education from 2000 to 2014 in the Chinese Social Sciences Citation Index database, we found that over the past 15 years, research on the quality of Chinese higher education was clearly oriented toward policies, and a good interactive relationship formed between research and policy. Looking at research topics, apart from macrodiscussions of the spirit of several educational reforms, the relevant topics are mainly focused on higher education quality issues in the massification stage, issues of higher education academic management, issues of student cultivation, and issues of ensuring and evaluating higher education quality. Of these, issues of ensuring and evaluating higher education quality have continually been the mainstream of research on Chinese higher education quality, and there has been an increasing trend of emphasizing ensuring internal quality within schools, emphasizing student participation, and evaluating the effectiveness of student learning. Scholars had a renewed focus on the topics of higher education academic management and student cultivation after 2010, and truly improving the quality of higher education will become a future hot topic of study, however there is an urgent need for further study.

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Guiding industries to produce in an effective and environmentally sustainable manner has become a key issue for governments around the world. Over the past 15 years, series of regional and industrial development policies have been introduced by the Chinese government. This has influenced the geographical distribution and energy efficiency performance of China’s industries. This paper quantifies the influence of enterprises geographical distribution on energy efficiency improvement in the paper industry and aims at providing some helpful suggestions on industrial development to policy makers. The main results show that, firstly, the paper industry in eastern China shows obvious characteristic of agglomeration. The average location quotient is 1.2278. However, following the industrial and regional development policies, the characteristic of agglomeration is weakening. Secondly, only when agglomeration reaches a certain level (location quotient is above 0.5447) will industrial agglomeration positively impact on industrial energy efficiency improvement (a 1% increase in agglomeration will increase dynamic energy efficiency by at least 0.23%). Thirdly, the regional development policies carried out by the government slow the pace of energy efficiency improvement in China’s paper industry. The empirical results indicate that the government needs to consider regional characteristics and consciously guide industrial enterprises to concentrate in the dominant area. [ABSTRACT FROM AUTHOR]

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

In July 2015, China's national legislature brought in prosecutor-led civil environmental public interest litigation ("EPIL") for thirteen selected provincial areas of the country. After a two-year legal experiment, this prosecutor-led civil EPIL system was then established nationwide in July 2017. Yet, can it be said that prosecutorial regulators in China are in fact a paper tiger? Drawing upon content analysis of the 655 prosecutor-led civil EPILs and in-depth interviews with twelve frontline prosecutors and judges, this article examines the dynamics of regulatory practice and the motivation of the Chinese prosecutorial organs to engage in environmental regulation through litigation. Based upon the above two legislative landmarks in the law reform of this area, the regulatory practice of prosecutorial organs can be viewed as having occurred in three stages, with each stage featuring a distinct regulatory model: ad hoc regulation through local innovation before July 2015, forced regulation during the legal experiment from July 2015 to July 2017, and perfunctory regulation after the nationwide establishment of the prosecutor-led civil EPIL system in July 2017. The data shows that the Chinese prosecutorial organs have engaged in a larger number of such lawsuits since the second stage, but they have shown a strong preference for cases with less complicated facts, weak and small defendants, and minor environmental violations. Three factors that influence regulatory motivation are employed to analyse the change in regulatory models: the ambiguity of the law, the top-down political pressure for regulation, and the cost of regulation. This study highlights the very limited effectiveness of vertical political pressure in boosting prosecutorial regulation and the strong impacts of the cost of regulation and the ambiguity of the law. In particular, the high cost of regulation that takes weak regulatory capacity, lack of regulatory autonomy, and the winning rate-oriented performance appraisal system into account have significantly weakened the motivation of prosecutorial organs to pursue civil EPIL. The findings of this study echo the conditions present in the successful prosecutorial regulations in Brazil and contribute to the scholarship about prosecutorial regulations in the field of environmental protection in the Global South. [ABSTRACT FROM AUTHOR]

Existing studies on environmental policy implementation in China have largely been focused on the inadequacy of environmental policy implementation at local levels and the adversarial campaign‐style enforcement used to remedy it, while overlooked other approaches to addressing environmental issues. We present a case in which a consensual approach was used to control water pollution and identify key factors contributing to the adoption and success of such an approach. The research unit is the process of water pollution control in Shandong Province from 2002 to 2011. During the case period, the pulp and paper industry (the leading polluting source) was regulated with gradually tightened water pollution discharge standards which were made and implemented in a consensual way, surface water quality was greatly improved, and the economic output of the regulated industry grew rapidly. Key factors contributing to the adoption and success of such an approach include the presence of a capable policy entrepreneur who played an important role in policy innovation, forging consensus building in policy making and facilitating consensual policy implementation; the deep and wide involvement of the regulated firms in the policy making process which allowed them to share know‐how and express preferences; and the strong political support from provincial higher‐ups which signaled strong political wills. The findings enrich our understanding of environmental policy enforcement in China by adding a set of internal factors to a literature pool focusing more on the the influence of such external factors as institutional incentiveson policy processes and outcomes. [ABSTRACT FROM AUTHOR]

β-Agonists are illegal feed additives in the feed industries of many countries, especially China. Here, we report a microfluidic paper-based analytical device (μPAD) coupled with the chemiluminescence (CL) method to provide the sensitive, simple and rapid quantitative detection of β-agonists in swine hair samples. In this study, we found that the β-agonists diminished the CL generated by the reaction of K3[Fe(CN)6] and luminol on μPAD, which was different from that observed in the aqueous solution, and the degree of diminishment was proportional to the concentration of β-agonists. The possible mechanism was discussed as well. Also, this detection method showed a wide linear range (from 4.0 × 10-8 to 1.0 × 10-5 mol L-1) and low limit of detection (2.0 × 10-8 mol L-1) with a low consumption of samples and reagents. Satisfactory recovery values (from 78% to 95%) were achieved. Therefore, our μPAD CL sensor will be favorable to develop a miniaturized instrument for the on-site analysis of β-agonists in swine hair samples.

Simple Summary: In this study, we ask whether the invasive paper mulberry (Broussonetia papyrifera) has a competitive advantage over neighbor trees in a native area. We determined the competitive capacity of paper mulberry in three deciduous broad-leaved forests using structural indices including the mixing index, the tree–tree interval index, and the diameter/height differentiation index. It was found that the reference paper mulberry had a slight competitive advantage over neighboring trees in both the horizontal and vertical planes. Such a competitive ability may play a significant role in the ecological invasion of paper mulberry. Our findings not only help to reveal the invasion mechanism of paper mulberry, but also provide an important reference for the management and utilization of paper mulberry in invaded areas. Paper mulberry (Broussonetia papyrifera) is currently an invasive species on several continents. However, little is known about whether paper mulberry has a competitive advantage over its surrounding trees in its native distribution range, subtropical regions of China. Here, we determined the relative intraspecific and interspecific competitive capacity of paper mulberry in three subtropical deciduous broad-leaved forests using the indices of structural diversity including the mixing index, the tree–tree interval index, and the diameter/height differentiation index. It was found that more than 80% of mingling index values were not greater than 0.25, suggesting a stronger competitiveness of paper mulberry relative to other tree species. The tree–tree interval index values ranged between 1 m and 2 m, suggesting a strong competition between paper mulberry and its neighbors. Moreover, more than 60% of the height differentiation index and diameter differentiation index values were positive, suggesting that the reference paper mulberry had a slight competitive advantage over neighboring trees in both the horizontal and vertical planes. These collectively suggest a competitive advantage over other tree species in the native distribution range, which may play a significant role in the ecological invasion of paper mulberry. Our findings not only help to reveal the invasion mechanism of paper mulberry, but also provide an important reference for the management and utilization of paper mulberry in invaded areas. [ABSTRACT FROM AUTHOR]

In China, master's students in humanities and social sciences (HSS) are becoming the main target of Chinese-language predatory journals. Existing research has not paid enough attention to why these students publish papers in Chinese-language predatory journals. This research interviewed 30 HSS master's students with different majors using semi-structured interviews and Grounded Theory to analyze the data; it found that research discrimination, research context, self-awareness, and individual demand are the main reasons why students publish papers in Chinese-language predatory journals. This study provides the following suggestions in an effort to solve the problem of Chinese-language predatory journals. First, the Chinese government should draw up a blacklist of Chinese-language predatory journals. Second, the research evaluation departments of Chinese universities and research institutions should evaluate the research results of HSS master's students based on this list. Third, Chinese universities or scientific research institutions should strengthen the training of HSS master tutors and increase their awareness of Chinese-language predatory journals. And finally, Chinese HSS master's students should be taught about the hazards of Chinese-language predatory journals in research integrity and ethics courses, and refuse to publish papers in Chinese-language predatory journals. [ABSTRACT FROM AUTHOR]

We utilized cross tabulation statistics, word frequency counts, and content analysis of research output to conduct a bibliometric study, and used CiteSpace software to depict a knowledge map for research on entrepreneurship education in China from 2004 to 2013. The study shows that, in this duration, the study of Chinese entrepreneurship education experienced a progression through three stages, an "exploratory stage of learning from foreign models," a "developmental stage geared toward employment problems," and a "transformative stage promoting cultivation of student abilities," and featured three primary characteristics, "multidisciplinary fusion," "imbalanced regional distribution," and "policy orientation." In the future, popular fields in the study of entrepreneurship education are to be concentrated in the three areas, namely "entrepreneurship education and talent cultivation," "entrepreneurship education and entrepreneurial environments," and "entrepreneurship education and innovation education."

In areas with serious pollution problems, the government designates a special emission limit (SEL) for pollution control and environmental protection in China. This paper examines the effects of chemical oxygen demand (COD) SEL on firms' production activity and market performance in the pulp and paper industry in the Lake Tai area in China. Using firm-level data, we employ a difference-in-differences strategy and find that SEL has a negative impact on the production scale, profitability, and market size of the regulated firms, while showing no significant impact on firm exports. The heterogeneity tests suggest that the impact of SEL on production and market performance varies with firm ownership, firm size, and target market. The reallocation effect of production shifts extra production from exited firms to existing firms, which explains the expansion of production scale and market size for SOEs and large-sized regulated firms. Compared with the decline of production scale, the inventory alleviation effect reduces the negative impact of stricter environmental regulation on firm performance.

In order to clarify which types of research is more conducive to improving innovation performance, we use the panel data of key universities in China from 2009 to 2017 for empirical research. The results show that basic research intensity is significantly positive correlated with innovation performance, while paper influence, patent novelty plus the interaction between paper influence and patent novelty are all playing a mediating role between basic research intensity and innovation performance. Furthermore, we use applied research intensity, experimental development intensity and provincial panel data for variables substitution and sample subdivision to carry out robustness test, clarifying the functional mechanism and the heterogeneity of boundary conditions between different types of research intensity and innovation performance. Relevant conclusions are of great theoretical and practical value for optimising the allocation of S&T resources and enriching the theoretical system of innovation research. [ABSTRACT FROM AUTHOR]

Integrating science learning with game experience and physical manipulatives not only overcomes the rigidity of traditional teaching, but also makes the learning experience pleasant for students and improves their science inquiry ability. Today, with the popularization of mobile devices and technology, both the value and feasibility of gamified science learning have increased significantly. However, several studies showed that students might get lost or feel bored during science inquiry. To let students enjoy the science inquiry process and improve their science process skills, the researchers combined mobile technology, game design elements, and science inquiry and designed the gamified science inquiry activity "we are aircraft designers". Here, students designed and manipulated a smartphone-controlled paper airplane by mobile devices connected via Bluetooth. To investigate the effects of the gamified science inquiry activity, the flow state and science process skills of 71 students of a junior high school in China were explored. The proposed gamified science inquiry activity enhanced flow and science process skills of students with high and middle level flow. No differences were found on flow and science process skills between males and females. Based on these results, the guidelines for the design of a gamified science inquiry activity are discussed. [ABSTRACT FROM AUTHOR]

Objectives: To describe retracted papers originating from paper mills, including their characteristics, visibility, and impact over time, and the journals in which they were published., Design: Cross sectional study., Setting: The Retraction Watch database was used for identification of retracted papers from paper mills, Web of Science was used for the total number of published papers, and data from Journal Citation Reports were collected to show characteristics of journals., Participants: All paper mill papers retracted from 1 January 2004 to 26 June 2022 were included in the study. Papers bearing an expression of concern were excluded., Main Outcome Measures: Descriptive statistics were used to characterise the sample and analyse the trend of retracted paper mill papers over time, and to analyse their impact and visibility by reference to the number of citations received., Results: 1182 retracted paper mill papers were identified. The publication of the first paper mill paper was in 2004 and the first retraction was in 2016; by 2021, paper mill retractions accounted for 772 (21.8%) of the 3544 total retractions. Overall, retracted paper mill papers were mostly published in journals of the second highest Journal Citation Reports quartile for impact factor (n=529 (44.8%)) and listed four to six authors (n=602 (50.9%)). Of the 1182 papers, almost all listed authors of 1143 (96.8%) paper mill retractions came from Chinese institutions and 909 (76.9%) listed a hospital as a primary affiliation. 15 journals accounted for 812 (68.7%) of 1182 paper mill retractions, with one journal accounting for 166 (14.0%). Nearly all (n=1083, 93.8%) paper mill retractions had received at least one citation since publication, with a median of 11 (interquartile range 5-22) citations received., Conclusions: Papers retracted originating from paper mills are increasing in frequency, posing a problem for the research community. Retracted paper mill papers most commonly originated from China and were published in a small number of journals. Nevertheless, detected paper mill papers might be substantially different from those that are not detected. New mechanisms are needed to identify and avoid this relatively new type of misconduct., Competing Interests: Competing interests: All authors have completed the ICMJE uniform disclosure form at https://www.icmje.org/disclosure-of-interest/ and declare: JSR receives research support through Yale University from Johnson and Johnson to develop methods of clinical trial data sharing, from the Medical Device Innovation Consortium as part of the National Evaluation System for Health Technology, the Food and Drug Administration for the Yale-Mayo Clinic Center for Excellence in Regulatory Science and Innovation program (U01FD005938), the Agency for Healthcare Research and Quality (R01HS022882), the National Heart, Lung and Blood Institute of the National Institutes of Health (R01HS025164, R01HL144644), and from the Laura and John Arnold Foundation to establish the Good Pharma Scorecard at Bioethics International. JSR is also an expert witness at the request of Relator's attorneys, the Greene Law Firm, in a qui tam suit alleging violations of the False Claims Act and Anti-Kickback Statute against Biogen Inc. DSE serves as an expert witness in asbestos, talc, opioid, and concussion litigation at the request of injured people. No other authors declared any potential competing interests., (© Author(s) (or their employer(s)) 2019. Re-use permitted under CC BY-NC. No commercial re-use. See rights and permissions. Published by BMJ.)

Background and Aims: This bibliometric analysis aims to analyze the high-cited papers (HCPs), those which have received >100 citations) on Sarcopenia to provide insight into publication performances and research characteristics of the literature., Methods: Global HCPs on Sarcopenia research were identified from the Scopus database from January 1993 to August 2022. VOSviewer, and Biblioshiny software were used to visualize the collaborative interaction among most productive countries, organizations, authors, and keywords. Select bibliometric measures were applied to evaluate the publication productivity and their influence in this area., Results: Out of 6219 publications on Sarcopenia only 398 were HCPs. These HCPs received an average of 271.7 citations per publication (CPP). The most productive organizations were the Università Cattolica del Sacro Cuore, Italy, and Jean Mayer USDA Human Nutrition Center on Aging, USA. The most impactful organizations in terms of CPP and relative citation index were CHU de Toulouse, France, and Università Cattolica del Sacro Cuore, Italy. The most productive authors were Landi F and Morley JE, and Anker SD from Italy and Germany respectively. The most impactful authors were: Cederholm T (Sweden), Cruz JAJ (Spain) and Rolland Y (France). There were few/no HCPs from South America, Africa, South Asia, and USSR., Conclusion: Sarcopenia research has been predominantly done in USA, Europe, and China, and rarely from low and middle-income countries. Further focus of research should be on its etiopathogenesis (especially at the molecular level), prevalence in different communities, methods to diagnose it in early stages, and its cost-effective management., Competing Interests: Declaration of competing interest Authors #1 (RV), and 3 (AM) are of the Editorial board of DMSCRR., (Copyright © 2022 Diabetes India. Published by Elsevier Ltd. All rights reserved.)

To comprehensively prevent and resolve the potential risk of a "bottleneck" in the context of reverse globalization, sorting out China's potential autononious and controllable key products systematically is an important issue. The paper constructs a product space network model according to the data of 243 countries' export products fkom 1995 to 2019 and measures the product coreness based on the revealed comparative advantage of products to identift' global core products. On this basis, the close degree of grey incidence model is used to quantitatively analyze the close correlation degree of the overall revealed comparative advantage distribution of countries in the global product system. And through the analysis of the marginal contribution of revealed comparative advantage, the study also identities China's potential autonomous and contiollable key products. Among the 124 global core products in the top 10% of the coreness in 2019, the products whose revealed comparative advantage changes make a greater contribution to the distribution of China's overall revealed comparative advantage are potential autonomous and controllable key products in China. Among the top 31 kinds of core products with the top 25% contribution rate, China 's potential autonomous and conn·ollable key products are mainly distributed in the fields of mechanical mid electrical equipment, vehicles, aircraft and ships, optical and medical precision instruments with high-tech characteristics, as well as in the field of chemical products with capital-intensive characteristics. [ABSTRACT FROM AUTHOR]

China is the top emitter of greenhouse gases in the world. Pulp and paper industry is one of eight the strictly regulated industries about carbon emission in China. However, estimates of carbon emissions from China's pulp and paper industry have been suffered from remarkable uncertainty. It is summarized that is aroused by the inaccuracy of factors evaluating energy consumption, and the huge gap between the calculation standards for assessing energy consumption in the production process and the actual level recorded in the factories. This paper re-evaluated the carbon emission of China's pulp and paper industry from the perspective of life cycle assessment, and applied more accurate emission factors, taking account of the actual energy consumption of the production process in factories, to estimate the actual carbon emissions in maximum. It is found that the national standards about the energy consumption quota of China's pulp and paper industry is no longer applicable, and the actual energy consumption regulated in the production process is far better than the advanced level given by the national standards. The greenhouse gas emission have been seriously overestimated approximately 12.00%–56.17% by international organizations. • Life Cycle Analysis of the China's pulp and paper Industry is conducted thoroughly. • The pulp flow of China's pulp and paper Industry is analyzed. • Energy regulated in factory is far better than the national standards' required. • Carbon emissions of China's pulp and paper Industry are overestimated. [ABSTRACT FROM AUTHOR]

This paper examines whether and to what extent data-driven learning (DDL) activities can improve the lexico-grammatical use of abstract nouns in L2 writing. A topic-based corpus was compiled to develop concordance learning activities, and 40 Chinese students majoring in English were randomly assigned to a control group or an experimental group. At the prewriting stage, both groups were given a list of five abstract nouns: the experimental group was provided with paper-based concordance lines to study the collocations of the words, while the control group was allowed to consult dictionaries for the usage of the words. The written texts of the pre-test, immediate post-test, and delayed post-test were analysed and compared between and within groups. The results showed that the written output by the experimental group, as compared with the control group, contained a higher variety of collocational and colligational patterns and had fewer linguistic errors in using the target abstract nouns. The post-experiment learning journals and questionnaires administered to the experimental group further confirmed that concordance activities encouraged usage-based learning, helped students notice the lexical collocations and prepositional colligations of the target words, and thus improved accuracy and complexity in their productive language. Despite these positive findings, potential problems of using concordance activities for independent learning were also reflected in the students' written output and reported in the learning journals.

Recently, papers with multiple corresponding authors (co-correspondence) are frequently noticed in scientific journals. This is a trend that parallels a significant increase in research collaboration, but its rapidity raises concern about whether the legitimacy and value of the corresponding authorship are changing or even damaged. This study investigated how extensive and sound the trend of co-correspondence in science and engineering is. The increasing trend of co-correspondence papers was confirmed by examining SCOPUS index (www.scopus.com) for the papers published by scholars of the USA, Japan, South Korea, and China in 2008-09 and 2018-2019. The number of co-correspondence papers indeed increased in all four countries. However, the numbers varied significantly among the countries, markedly higher in South Korea and China cases, which also showed far higher numbers of the papers with a co-corresponding author who is the only member from his group. To dig into reality, South Korean scholars were surveyed with questionnaires regarding the trend of co-correspondence. Over 64% of respondents answered that they had participated in papers where multiple corresponding authors are listed, and 22% of them thought that the co-corresponding author did not play his due role and the co-corresponding authorship was exchanged between friends or given as a courtesy for various reasons. Although corresponding authorship allocation is majorly a concern for journal editors, a trend of inappropriate practices or misuse of co-corresponding authorship calls for local and global academic community awareness. [ABSTRACT FROM AUTHOR]

To determine the occurrence of mineral oil hydrocarbons (MOH) in food contact papers in China, and to investigate the potential sources of MOH contamination, a total of 159 food contact papers and raw materials were analysed by off-line solid-phase extraction-gas chromatography flame ionisation detection (SPE-GC-FID) and a GC-MS method. The migration of MOH from food contact papers into Tenax, olive oil or 50% ethanol under the worst foreseeable conditions of use was determined. The results indicated that the occurrence of MOH in China is of a potential health risk concerning the migration of mineral oil saturated hydrocarbons (MOSH) and mineral oil aromatic hydrocarbons (MOAH) which were detected in 82.6% and 50.4% of samples, respectively. Migration of MOSH from 47.9% of samples was higher than 2 mg/kg and migration of MOAH from 32.2% samples exceeded 0.5 mg/kg in case of the worst foreseeable condition of use. The highest mean migration of MOSH and MOAH were found in packaging papers for long-term storage (more than 6 months), with mean migration of 91.2 mg/kg and 1.4 mg/kg, respectively. Migration of MOH from printed paper was considerably higher than that of unprinted paper, validating previous findings that the printing ink is the predominant source of MOH contamination in food contact papers. Migration of MOH from paper bowls used for packing instant noodles was relatively low, suggesting the internal hollow layer may be acting as a functional barrier that could block the transfer of MOH (up to C28) through the gas phrase, even though the outer layer was made from recycled paper. High concentrations of MOSH and MOAH were also detected in de-foamers, adhesives and rosin sizing agents, indicating that the MOH contamination caused by the use of raw materials and additives should also be taken into consideration. [ABSTRACT FROM AUTHOR]

In real applications of data envelopment analysis (DEA), there are cases in which undesirable outputs are produced along with desirable outputs in such a way that the total sum of the produced undesirable outputs over the production units must be fixed and constant. In this case, a trade-off between the decision-making units (DMUs) is needed to balance the production of undesirable outputs. In a rational sight, this trade-off is done in such a way that all DMUs improve their relative performances. In this paper, a single DEA-based model is proposed to model fixed and variable-sum undesirable outputs in production processes. A common equilibrium efficient frontier is constructed and after reallocating the input/output factors, all decision-making units (DMUs) prevail as efficient. A real case of 32 paper mills in China is given. The results of the analysis demonstrated that some economically developed paper mills have better performance than less developed paper mills; in particular, all efficient paper mills are the developed ones. [ABSTRACT FROM AUTHOR]