Search

Intelligent transportation infrastructure has gained significant research attention recently. In this paper, an innovative sensor network of smart road stud (SRS) is developed to enhance traffic detection infrastructure characterized by its functionality in traffic data collection, long/short range wireless data transmission, self-sustained power supply, and remote custom controlled lighting-based traffic guidance. Compared to the traditional traffic detectors and road studs, SRS nodes are installed on lane lines instead of lane center to enable the additional applications besides the detection function, such as traffic monitoring, congestion warning, routing guidance, and so on. SRS detects vehicles based on three-axis geomagnetic sensors. A vehicle detection algorithm is proposed correspondingly under different operation scenarios to count vehicles in two adjacent lanes. Its detecting accuracy can be further improved by a sensor network of multiple SRSs working cooperatively. Field test results show that the vehicle detection accuracy based on the SRS network is about 98% per lane, which is the same level as the commercial detector installed in center of lane, even under the non-standard driving behaviors such as crossing lane line. The high performance, value-added service, and low cost enable wide-range applications of SRS networks as part of intelligent traffic detection infrastructure. [ABSTRACT FROM AUTHOR]

Wireless sensor networks (WSNs) refer to a group of battery-operated tiny sensor nodes having vast application areas in daily use. These are spatially dispersed and dedicated wireless sensor nodes for observing and recording the different parameter and physical conditions of the surroundings. There is a recent advancement in the field of network connectivity and computations in WSNs. The key functions of WSNs are a data extraction and to transmit the extracted data to the server placed at an isolated location. Various types of WSNs like underground underwater, terrestrial, and multimedia networks get applications domains such as in industrial automation, traffic monitoring and control medical device monitoring, and many other areas. Despite the thriving market, there are several challenges like energy efficiency, limited storage and computation, low bandwidth, high error rates, scalability, and survivability in harsh environment; hence, network lifespan expanding is a critical demanding issues. So many researchers have earlier focused towards finding the optimal path in between member node and sink node, so that energy depletion can be reduced to improve the network lifespan. There are different challenges in WSNs but one of the most challenging issues is how to minimize the energy consumption; numerous bio-inspired techniques have been proposed previously to obtain an optimal path between the member node and the sink node. In this manuscript, we are presenting a comprehensive survey on optimization technique-based routing and clustering. The study of this comprehensive survey offers in-depth summary of the past researches in the area of WSNs. [ABSTRACT FROM AUTHOR]

Noise and air pollution are among the most important problems and challenges in urban environments. Noise can cause several problems in functioning within urban settlements and may result in a variety of health problems. Continuous monitoring, prevention, and active work on solving these problems are in the focus of research communities, local and national agencies and organizations, and many international organizations. Traffic noise on city roads has been identified as one of the major problems in urban settlements. Fortunately, it can be monitored and controlled in a way that can reduce its level and negative effects. One of the most effective and cheapest ways to monitor and control traffic noise is to use wireless sensor networks, IoT technology, and cloud-based architectures. This article presents an approach in designing urban traffic noise monitoring system based on LoRaWAN and microservices oriented architecture supported with open-source hardware and software solutions. Design of the system includes planning LoRaWAN network and development of the IoT system layered architecture. Methods for traffic routing and rerouting in urban areas, based on experiments that uses Dijkstra and Floyd–Warshall algorithms are presented. The system implementation and evaluation of the proposed routing modifications are presented in the case of the city of Zrenjanin in Serbia. Discussion of extensions and improvements of the presented system, as well as future research directions, are also presented. [ABSTRACT FROM AUTHOR]

Wireless network sensors and their use in traffic monitoring, traffic density determination or vehicle speed detection and classification have recently been the focus of interest for researchers. This article describes how a new sensor circuit was designed to deliver instantaneous, real-time and novel solutions as a vehicle detection system, which is more powerful than the nodes used in other studies, and gives results with smaller error margins due to its serial communication qualification. With the proposed logic algorithm, it was possible to categorise the instantaneous traffic status of a road in four levels: no traffic, mild traffic, heavy traffic and very heavy traffic. Additionally, with the nodes placed at the beginning and the end of the road, the number of vehicles per hour for a day was determined and traffic was analysed. Then, vehicles passing by were classified with a proposed classification algorithm and magnetic signature length (MSL) parameter as cars, minibuses, buses and trucks, and an accuracy rate of 95% was obtained. As the last application, the direction of motion of the vehicle on the x-axis as well as left-to-right or right-to-left directions was determined, and the result was 94% accurate. The simplicity of the proposed algorithms, the absence of any complex mathematical calculations, the low cost of the sensor node and circuit and the low power consumption of the communication system demonstrate the superiority of this system in comparison with other studies. [ABSTRACT FROM AUTHOR]

This paper proposes a novel approach to dynamically manage the traffic lights cycles and phases in an isolated intersection. The target of the work is a system that, comparing with previous solutions, offers improved performance, is flexible and can be implemented on off-the-shelf components. The challenge here is to find an effective design that achieves the target while avoiding complex and computationally expensive solutions, which would not be appropriate for the problem at hand and would impair the practical applicability of the approach in real scenarios. The proposed solution is a traffic lights dynamic control system that combines an IEEE 802.15.4 Wireless Sensor Network (WSN) for real-time traffic monitoring with multiple fuzzy logic controllers, one for each phase, that work in parallel. Each fuzzy controller addresses vehicles turning movements and dynamically manages both the phase and the green time of traffic lights. The proposed system combines the advantages of the WSN, such as easy deployment and maintenance, flexibility, low cost, noninvasiveness, and scalability, with the benefits of using four parallel fuzzy controllers, i.e., better performance, fault-tolerance, and support for phase-specific management. Simulation results show that the proposed system outperforms other solutions in the literature, significantly reducing the vehicles waiting times. A proof-of-concept implementation on an off-the-shelf device proves that the proposed controller does not require powerful hardware and can be easily implemented on a low-cost device, thus paving the way for extensive usage in practice. [ABSTRACT FROM AUTHOR]

In the near future the majority of the automotive systems will strongly rely on the exchange of information among vehicles or infrastructure to improve the driving conditions, increment security or simply have access to internet and entertainment services. This is the reason why the research and development of Vehicular Ad-Hoc Networks is very important nowadays. In this paper, a design and analysis of a Vehicular Ad-Hoc Network (VANET) assisted by an event driven Wireless Sensor Network (WSN) for traffic monitoring in a highway is presented. The aforementioned WSN is based on the wellknown LEACH protocol. However, a key modification is proposed in order to increase the network lifetime for applications on VANETs. The basic idea is to minimize the overlapping areas among neighboring clusters in order to reduce redundancy and to have a better coverage of the supervised highway with a lower transmission cost. Additionally, two different methods for the event reporting are proposed. In the first one, the traffic information is transmitted exclusively among the WSN nodes, while the second method makes use of the vehicles in order to relay the information to the sink. The proposed methods are analyzed in terms of energy consumption and average report delay. [ABSTRACT FROM AUTHOR]