Search

The tribological behavior of traditional oil-in-water (O/W) lubricants (1.0 wt.%) and nano-TiO2 additive lubricants (1.0–9.0 wt.%) during micro rolling of titanium foils were analyzed. In this study, the surface morphologies of titanium foils under various lubrication conditions were assessed, and the corresponding lubrication mechanisms were revealed. The tribological behavior of nano-TiO2 additive lubricants during micro rolling of titanium foils was also explored through a series of characterization methods. The utilization of nano-TiO2 additive lubricants in micro rolling reduces the surface roughness of titanium foils. Moreover, it effectively inhibits the generation of indentations and cracks during rolling processes, enhancing the surface quality of rolled specimens. Additionally, owing to the synergism of rolling, tribo-film, mending and polishing effects of the nanoparticles, both the rolling force and surface roughness were minimized by using lubricants containing 3.0 wt.% TiO2 nanoparticles. Overall, an optimal concentration (3.0 wt.%) of TiO2 nanoparticles in water-based nanolubricants was obtained with enhanced tribological properties and lubrication performance during micro rolling of titanium foils. [ABSTRACT FROM AUTHOR]

Oil-in-water (O/W) emulsion is widely applied as a lubricant during hot rolling process. For reducing environmental impact caused by O/W emulsion, a novel nano-TiO 2 additive O/W lubricant with improved stability and reduced coefficient of friction (COF) is developed. Little research, however, has been focused on the growth behaviour of oxide scale formed on the workpiece surface and its effects on the tribological property of nano-TiO 2 additive O/W lubricant. In the current work, oxidation tests of high strength steel were conducted to investigate the growth behaviour of oxide scale and obtain different surface morphologies of the oxide scale. Ball-on-disk tribological tests under a temperature of 80 °C were carried out to investigate the effects of surface morphology of oxide scale on the tribological behaviour under nano-TiO 2 additive O/W lubrication. The performance of the new developed lubricant was evaluated by hot rolling process. The growth mechanism of oxide scale and the modified oxide scale growth model were proposed. Tribological results indicate that oxide scale plays an important role in the tribological behaviour of nano-TiO 2 additive O/W lubricant. A reduction in surface roughness can result in a decrease of COF, while the COF will increase if the surface roughness reduces too much because some of the nano-TiO 2 particles cannot go through the contact area to play a positive role in lubrication. [ABSTRACT FROM AUTHOR]