Search

Terahertz backward wave oscillators based on double corrugated waveguides are enabling devices for modern satellite communication systems. This research focuses on the design of a 0.34 THz double corrugated waveguide-based interaction structure using a sheet beam. This choice allows the use of shorter pillars along with a narrow gap between pillar rows. Shorter pillars are easier to manufacture and a narrow gap is required for better interaction impedance. Circular beams restrict the use of larger pillars and narrow gap between pillars. The performance of this interaction structure is compared with a folded waveguide. Under the same operating conditions involving a 20 kV beam voltage and a 30 mA beam current, the double corrugated waveguide interaction structure exhibits impressive performance in simulations, featuring an interaction impedance of 0.52 Ω at 0.34 THz, an output power of 3.2 W, and a bandwidth extending to approximately 20 GHz. In contrast, the folded waveguide, as per simulation results, registers values of 0.43 Ω , 2.6 W, and a 12 GHz bandwidth, respectively. The proposed double corrugated waveguide-based interaction structure is fabricated using modern CNC machining. Experimental validation reinforces the effectiveness of this design, with measurements indicating reflection below −20 dB and transmission exceeding −2 dB. [ABSTRACT FROM AUTHOR]

It is found that the plasma waves driven by an electron beam rotating in a magnetized overdense plasma can be converted into terahertz electromagnetic radiation by new mechanisms. According to the particle-in-cell simulation results, the radiation modes include a dominant extraordinary (X) mode at twice the plasma frequency 2 f p and a subordinate X mode at f p . The 2 f p radiation can be generated by the coupling of a beam mode and a scattered upper-hybrid (UH) mode, or by the coupling of a beam mode and a right-handed X mode. Here, the beam mode can be a UH mode or a left-handed X mode driven by the beam under the Cherenkov condition, and the right-handed X mode can be induced by high-order electron cyclotron maser instability. The f p radiation is the right- or left-handed fundamental X mode escaping from the plasma boundary. This study also shows that the breakdown of beam modulation is responsible for the radiation attenuation. The scheme proposed in this paper can be applied in high-power THz radiation sources and diagnosis of magnetized plasmas. [ABSTRACT FROM AUTHOR]

A novel sine groove waveguide slow wave structure (SGW-SWS), originated from the sine waveguide (SW), is proposed for a wideband terahertz (THz) traveling wave tube (TWT). SGW-SWS not only has high interaction impedance in a relatively wide frequency band, but also has a wide beam tunnel. In addition, it can be fabricated using the Nano-Computer Numerical Control (CNC) milling techniques. The high-frequency simulation results show that, under the same dispersion, the passband of SGW-SWS is 23 GHz wider than that of SW-SWS, and the average interaction impedance of SGW-SWS is higher than that of SW-SWS in the whole passband. And the transverse dimension of beam tunnel is independent of the dispersion characteristics of SGW-SWS, so the beam current can be further increased by enlarging the size of beam tunnel. Moreover, the particle-in-cell (PIC) simulation results reveal that the saturated power and electronic efficiency of SGW-TWT in the frequency range of 201–260 GHz are more than 84.9 W and 2.72%, respectively, when the operating voltage is 20.8 kV and the beam current is 150 mA. [ABSTRACT FROM AUTHOR]

In this paper, a novel staggered double-segmented grating slow-wave structure (SDSG-SWS) is developed for wide-band high-power submillimeter wave traveling-wave tubes (TWTs). The SDSG-SWS can be considered as a combination of the sine waveguide (SW) SWS and the staggered double-grating (SDG) SWS; that is, it is obtained by introducing the rectangular geometric ridges of the SDG-SWS into the SW-SWS. Thus, the SDSG-SWS has the advantages of the wide operating band, high interaction impedance, low ohmic loss, low reflection, and ease of fabrication. The analysis for high-frequency characteristics shows that, compared with the SW-SWS, the SDSG-SWS has higher interaction impedance when their dispersions are at the same level, while the ohmic loss for the two SWSs remains basically unchanged. Furthermore, the calculation results of beam–wave interaction show that the output power is above 16.4 W for the TWT using the SDSG-SWS in the range of 316 GHz–405 GHz with a maximum power of 32.8 W occurring at 340 GHz, whose corresponding maximum electron efficiency is 2.84%, when the operating voltage is 19.2 kV and the current is 60 mA. [ABSTRACT FROM AUTHOR]

In the particle-in-cell simulation study of this paper, it is found that the high-power terahertz radiation at twice the plasma frequency can be generated by the interaction between a weakly relativistic, large-radius, focused electron beam and an overdense plasma. The terahertz radiation is emitted from a multi-filament structure in the electron beam, which is caused by the coupling of the longitudinal two-stream instability and the transverse filamentation instability. The analysis of the k space of the plasma waves indicates that the radiation can be explained by the mode coupling among a forward oblique mode, a backward oblique mode, and a second harmonic radiation mode. The influences of the beam Lorentz factor and plasma density on the radiation power, efficiency, and coherence are also investigated. The present results not only contribute to the development of novel megawatt-level narrowband terahertz radiation sources, but also propose a potential terahertz radiation mechanism for the fundamental research of the beam-plasma system. [ABSTRACT FROM AUTHOR]

A novel electron-optical system (EOS) for ${G}$ -band traveling-wave tubes (TWT) is investigated by simulation and verified by experiment. The EOS includes a sheet beam electron gun, a tunable periodic cusped magnetic focusing (TPCMF), and a collector. An elliptical focus electrode (FE) featuring a simple geometry and easy fabrication is utilized to compress the pencil beam into the sheet beam with a cross section of 0.4 mm $\times0.1$ mm. The electron gun with a cylindrical cathode of 0.8 mm diameter generates the sheet beam with voltage of 22 kV and current of 115 mA. Based on the sheet beam electron gun, the TPCMF with easy assembly and compact size is then proposed. The experimental results show that the beam transmission is 92.1% within a beam tunnel (its length 21.2 mm and cross section 0.8 mm $\times0.15$ mm). The EOS is suitable for ${G}$ -band TWT. [ABSTRACT FROM AUTHOR]

A new scheme for generating high power terahertz (THz) radiation by using two obliquely colliding electron beams in plasma is proposed. The particle-in-cell (PIC) simulation finds that a small beam intersection of high electron density is formed within a plasma wavelength when two thin electron beams collide. Meanwhile, the beam intersection can oscillate in a strong plasma wave driven by the two beams to produce THz radiation at double plasma frequency. A theoretical model is established showing that the radiation mechanism is the second-order current generated by the beam intersection oscillation. The angular distribution of the THz radiation is calculated by the theory, which agrees well with the PIC simulation. Compared with the existing high power THz sources, the scheme provided in this article has the advantages of a simple structure and no need for extreme parameter conditions, which is hopeful for applications in kilowatt-level coherent compact THz sources. [ABSTRACT FROM AUTHOR]

Traveling wave tube (TWT) is an attractive solution for wideband and high-power sources or amplifiers in the terahertz (THz) band. In this article, a novel slow-wave structure (SWS) for TWT, named double tunnel sine waveguide (DTSW), which is based on sine waveguide (SW), is proposed. The following key technologies are adopted: 1) the rectangular holes, at which the operating mode is cutoff, are alternately opened on the sine-shaped ridges to form two electron beam tunnels and 2) the lower surface of rectangular holes is flush with the top of sine-shaped ridges. Compared with the SW-SWS, DTSW-SWS has the wider operating band and higher interaction impedance under the condition that the phase velocity of the two SWSs is at the same level. In addition, DTSW-SWS is simple in structure and easy to fabricate. The particle-in-cell simulation results reveal that DTSW-TWT has an output power of more than 202 W in the frequency range of 202–255 GHz with the maximum power of ~405 W and electron efficiency of ~9.8% at 215 GHz, under the operating voltage of 23 kV and beam current of 180 mA. Therefore, the DTSW should be considered as a promising SWS for the high-power and wideband THz traveling wave amplifier. [ABSTRACT FROM AUTHOR]