Search

Accurate characterization of hydrocarbon reservoirs requires a good understanding of the paleostress history of their host sedimentary basin. This study aims at reconstructing the paleoburial and paleostress history of the syn-rift Barremian TOCA Fm. in the Lower Congo basin (West African margin). Two oriented borehole cores drilled offshore Congo were investigated using stress inversion techniques applied to calcite mechanical twins to constrain paleostress orientations and magnitudes. The inversion of calcite twins was performed on a widespread early diagenetic cement (~129 to ~113 Ma) and revealed that the TOCA Fm. has undergone a complex polyphase stress history, including (1) extensional stress regimes with vertical σ 1 and horizontal σ 3 trending NE-SW and WNW-ESE (N100) associated with the rifting episode preceding the opening of the South Atlantic (130 to 112 Ma), and with mean differential stresses of ~47 MPa for (σ 1 -σ 3) and ~ 20 MPa for (σ 2 -σ 3). The early N100 extension is associated with the development of normal faults striking N-S that likely reactivated inherited basement structures. The direction of extension evolved during the Barremian into the main NE-SW extension marked by the dominant normal faults striking NW-SE. (2) Compressional and strike-slip stress regimes with horizontal σ 1 oriented ~N-S possibly related to the far-field intraplate transmission of orogenic stresses generated at the distant Africa-Eurasia plate boundary at ~67–60 Ma, and with mean differential stresses of 40 MPa for (σ 1 -σ 3) and 28 MPa for (σ 2 -σ 3). (3) Compressional and strike-slip stress regimes with horizontal σ 1 oriented ENE-WSW to ~E-W that we tentatively relate to the mid-Atlantic ridge push and prevailing since ~15 Ma onwards, associated with mean differential stresses of ~45 MPa for (σ 1 -σ 3) and ~ 18 MPa for (σ 2 -σ 3). Our results reveal that the TOCA Fm. recorded mainly far-field stress effects that could be related to interactions between the African plate and surrounding plates, and that divergent passive margins may experience a complex tectonic history including both extensional and compressional events. • Calcite twin inversion is used to reconstruct paleostress history on the West Africa passive margin. • The orientations and magnitudes of paleostresses affecting the syn -rift TOCA Fm. are characterized from two offshore cores in the Lower Congo basin. • The timing of the successive stress regimes in the TOCA Fm. is constrained. • The influence of far-field tectonic and gravitational lithospheric stresses transferred from distant plate boundaries on the post-rift history on the West Africa passive margin is demonstrated. [ABSTRACT FROM AUTHOR]

Paleopiezometry provides an access to the past stress magnitude, key to better understand the behaviour of the earth's crust over long period of time. This contribution presents a review of some paleopiezometric techniques that can be used in the diagenetic domain, in fold-and-thrust belts and sedimentary basins. Calcite twinning and stylolite roughness techniques have been selected and are presented through a critical description of their methodologies, along with approaches to further reconstruct the complete effective stress tensor. Major geological lessons learned over the past decades from published studies are summarized and discussed along with a way forward to potential breakthroughs. [ABSTRACT FROM AUTHOR]

Abstract: This paper presents a new approach to constrain paleoburial and subsequent uplift by folding in fold–thrust belts, combining differential stress estimates from mechanically-induced calcite twins with the assumption that stress in the upper crust is in frictional equilibrium. Calcite twin data were collected from pre-folding veins in late Cretaceous limestones from the Ionian zone in Albania in order to (1) determine Paleogene–Neogene stresses associated with the development of the major vein sets in the frontal anticlines of the Outer Albanides and (2) estimate paleoburial of the Cretaceous reservoir rocks during pre-folding flexural subsidence of the foreland. The first vein set (set I) trends N140 (±20) and the second set (set II) is oriented N060 (±20). Calcite twinning analysis from set I veins reveals a pre-folding N030° extension likely related to foreland flexure; a later pre-folding, NE-directed compression (LPS) is identified either from one or from both vein sets in the samples from the Saranda anticline; this NE compression is instead recorded by twinning in set II veins from the Kremenara anticline during late stage fold tightening. This NE compression well agrees with independent microtectonic data, regional transport direction and contemporary stress. The differential stress values related to this NE compression are combined with the hypothesis of crustal frictional stress equilibrium to derive first-order estimates of paleoburial of the Cretaceous limestones just before they were uplifted by folding. The ~4 km paleoburial of these limestones estimated in the Saranda anticline is consistent with independent paleoburial estimates from stratigraphy, maturity rank of organic matter, paleotemperature/paleogeothermal gradients from fluid inclusions and predictions of kinematic modelling of the Albanian foreland. Our results therefore place reliable constraints on the amount and rate of vertical uplift of these Cretaceous limestones and yield a promising methodology for better constraining paleoburial and therefore erosion and uplift in fold–thrust belts. [Copyright &y& Elsevier]

Mechanical twins are common microstructures in deformed calcite. Calcite twins have been used for a long time as indicators of stress/strain orientations and magnitudes. Developments during the last decade point toward significant improvements of existing techniques as well as new applications of calcite twin analysis in tectonic studies. This review summarises the recent progress in the understanding of twin formation, including nucleation and growth of twins, and discusses the concept of CRSS and its dependence on several factors such as strain, temperature and grain size. Classical and recent calcite twin measurement techniques are also presented and their pros and cons are discussed. The newly proposed inversion techniques allowing for the use of calcite twins as indicators of orientations and/or magnitudes of stress and strain are summarized. Benefits for tectonic studies are illustrated through the presentation of several applications, from the scale of the individual tectonic structure to the continental scale. The classical use of calcite twin morphology (e.g., thickness) as a straightforward geothermometer is critically discussed in the light of recent observations that thick twins do not always reflect deformation temperature above 170–200 °C. This review also presents how the age of twinning events in natural rocks can be constrained while individual twins cannot be dated yet. Finally, the review addresses the recent technical and conceptual progress in calcite twinning paleopiezometry, together with the promising combination of this paleopiezometer with mechanical analysis of fractures or stylolite roughness. [ABSTRACT FROM AUTHOR]

Unravelling the burial-deformation history of sedimentary rocks is prerequisite information to understand the regional tectonic, sedimentary, thermal, and fluid-flow evolution of foreland basins. We use a combination of microstructural analysis, stylolites paleopiezometry, and paleofluid geochemistry to reconstruct the burial-deformation history of the Meso-Cenozoic carbonate sequence of the Cingoli Anticline (Northern Apennines, central Italy). Four major sets of mesostructures were linked to the regional deformation sequence: (i) pre-folding foreland flexure/forebulge; (ii) fold-scale layer-parallel shortening under a N045 σ1; (iii) syn-folding curvature of which the variable trend between the north and the south of the anticline is consistent with the arcuate shape of the anticline; (iv) the late stage of fold tightening. The maximum depth experienced by the strata prior to contraction, up to 1850 m, was quantified by sedimentary stylolite paleopiezometry and projected on the reconstructed burial curve to assess the timing of the contraction. As isotope geochemistry points towards fluid precipitation at thermal equilibrium, the carbonate clumped isotope thermometry (Δ47) considered for each fracture set yields the absolute timing of the development and exhumation of the Cingoli Anticline: layer-parallel shortening occurred from ~6.3 to 5.8 Ma, followed by fold growth that lasted from ~5.8 to 3.9 Ma. [ABSTRACT FROM AUTHOR]

Stylolites are pressure solution structures, the roughness of which yields quantitative information about the magnitude of the normal stress applied to the stylolite plane. The stress magnitude is calculated from the cross over length (L c) determined using the signal analysis of a 2D track. For a sedimentary, bedding-parallel stylolite (BPS), L c scales to the magnitude of the vertical maximum principal stress σ 1 , hence to the burial depth at the time the roughness of the stylolite froze. We present a dataset of nearly 200 BPS from Meso-Cenozoic folded carbonates across the Umbria Marche Apennine Ridge. The BPS population is used to address the discrepancies between L c values obtained by using different signal analysis methods. Assuming that in compressional settings burial-related pressure-solution more probably halts because of the switch of σ1 from a burial-related vertical attitude to a tectonic-related horizontal attitude, the vertical stress magnitudes derived from the inversion of the BPS roughness were combined to burial models at each investigated fold to reconstruct the absolute timing at which the orogenic stress started to prevail. The results indicate that the onset of horizontal compression started at ∼10 Ma and ∼8 Ma in the innermost and outermost folds, respectively, and predated fold development as indicated by the age of growth strata. These results establish Stylolite Roughness Inversion Technique as a reliable depth gauge that enables refining the timing of the onset of contraction in fold-and-thrust belts. [ABSTRACT FROM AUTHOR]

The paleostress history and associated deformation mechanisms affecting passive margins are seldom studied, as access to offshore parts is rather limited. We analyze an offshore wellbore core of the Albian, post-rift carbonates of the Sendji Fm which directly overlies the salt of the Aptian Loeme Fm in the Lower Congo Basin. Paleopiezometry based on stylolite roughness inversion (SRIT) and calcite twin inversion (CSIT) was combined with fracture analysis, U–Pb geochronology of calcite cement and burial modeling to unravel the orientations and magnitudes of horizontal and vertical stresses affecting the Sendji Fm over time, with a focus on the impact of salt tectonics on stress records. The results of SRIT on bedding-parallel stylolites constrain the range of depths over which the Sendji Fm strata deformed under a vertical principal stress σ1 to 650–2800 m (median ∼1300 m). Once projected onto the burial model derived from TemisFlow™ software, the range of depths converts to a period of pressure solution activity, from 101 to 15 Ma. Calcite twin measurements within the early diagenetic cement (U–Pb age = 101 ± 1 Ma) reveal three main types of stress regimes: (1) extensional stress regimes with σ3 trending ∼ N–S and ∼E-W associated with local, thin-skinned salt tectonics (101–80 Ma), (2) strike-slip stress regimes with σ1 trending ∼ NW-SE to NNE-SSW and a compressional stress regime with σ1 trending NNW-SSE, reflecting possible intraplate stress transfer from the distant Africa-Eurasia plate boundary (67–60 Ma); (3) a strike-slip and a compressional stress regime with σ1 trending E-W likely related to the mid-Atlantic ridge push possibly combined with effects of variations in elevation and density of the lithosphere and sedimentary flexural loading (15 Ma to present). The paleostress sequence suggests that the sedimentary cover was decoupled from the crust during salt tectonics and then recoupled from the late Cretaceous onwards. • The paleostresses affecting deep carbonates are characterized by studying an offshore core in the west African passive margin. • The timing of the successive stress regimes in the Sendji Fm is constrained. • Local gravitational stress from salt tectonics and far-field tectonic stress from plate boundaries influenced the margin. • The potential of a multi-proxy approach is established. [ABSTRACT FROM AUTHOR]