Search

The high energy density and robust cycle properties of lithium-ion batteries contribute to their extensive range of applications. Polyolefin separators are often used for the purpose of storing electrolytes, hence ensuring the efficient internal ion transport. Nevertheless, the electrochemical performance of lithium-ion batteries is constrained by its limited interaction with electrolytes and poor capacity for cation transport. This work presents the preparation of a new bio-based nanofiber separator by combining oxidized lignin (OL) and halloysite nanotubes (HNTs) with polyimide (PI) using an electrospinning technique. Analysis was conducted to examine and compare the structure, morphology, thermal characteristics, and EIS of the separator with those of commercially available polypropylene separator (PP). The results indicate that the PI@OL and PI-OL@ 10 % HNTs separators exhibit higher lithium ion transference number and ionic conductivity. Moreover, the use of HNTs successfully impeded the proliferation of lithium dendrites, hence exerting a beneficial impact on both the cycle performance and multiplier performance of the battery. Consequently, after undergoing 300 iterations, the battery capacity of LiFePO 4 |PI-OL@ 10 % HNTs|Li stays at 92.1 %, surpassing that of PP (86.8 %) and PI@OL (89.6 %). These findings indicate that this new bio-based battery separator (PI-OL@HNTs) has the great potential to serve as a substitute for the commonly used PP separator in lithium metal batteries., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Bacterial cellulose (BC) lithium-ion batteries separators possess outstanding thermal dimensional stability and electrolyte wettability, but theirs nano diameter and high aspect ratio lead to poor porosity and pore size uniformity of dense BC separators, limiting the Li + transmission in the separators. In this paper, chitosan (CS) with different molecular weight was grafted onto BC (named OBCS), and a high-performance OBCS separator with excellent pore structure and tunable pore size was prepared by simple suction filtration. The spacing and dispersion uniformity of OBCS were improved by the CS grafted on BC surface, thus improving the pore structure and porosity of OBCS separators. The results showed that the obtained OBCS separators not only have excellent physicochemical properties, but also exhibit higher electrochemical performances than the commercial polypropylene (PP) separator. This work provides a new feasible strategy for improving the pore structure and porosity of nanocellulose separators., Competing Interests: Declaration of competing interest There are no conflicts of interest to declare in this paper., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

As a green sustainable material, lignin-derived porous carbon (LPC) exhibits great application potential when used as the anode material in lithium-ion batteries (LIBs), but the applications are limited by the heterogeneity of the lignin precursor. Therefore, it is crucial to reveal the relationship among lignin properties, porous carbon structure and the kinetics of lithium-ion storage. Herein, LPCs from fractionated lignin have been prepared by an eco-friendly and recyclable activator. The structure of the LPCs was regulated by adjusting the molecular weight, linkage abundance and glass transition temperature (T g ) of lignin macromolecules. As the anode material of LIBs, the prepared 3D flower-like LPC E70 could achieve a reversible capacity of 528 mAh g -1 at a current density of 0.2 A g -1 after 200 cycles, 63 % higher than that of commercial graphite. Furthermore, kinetic calculations of lithium-ion storage behavior of LPCs were firstly used to confirm the contribution ratio of diffusion-controlled behavior and capacitive effect. Lignin with a high linkage abundance could yield LPC E70 with the largest interlayer spacing and specific surface area to maximize lithium-ion storage from both diffusion-controlled and capacitive contributions of specific capacities. This work provides a green, facile and effective pathway for value-added utilization of lignin in LIBs., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Separators typically play an important role in enhancing the electrochemical performance of lithium-ion batteries (LIBs), while the preparation of separators suffers good electrochemical performance and high stability. In this study, regenerated porous cellulose microspheres (RCM) were innovatively fabricated and the biodegradable RCM/Polyvinyl alcohol (PVA) separators were successfully prepared through simple mixing and solvent substitution. Interestingly, the RCM with rich carboxylic groups, not only function as nanofillers that increases the strength properties of the three-dimensional porous network, but also enhances Li + transfer (due to the COO - and Li + interactions), resulting in outstanding Li + transference number (0.54) of the RCM/PVA separator. In addition, the RCM/PVA separator shows excellent thermal stability and high liquid absorption rate (481.25 %). The LiFePO 4 /3 % RCM-HCl/PVA/Li cell displayed a high discharge capacity of 152.6 mAh·g -1 after 200 cycles at 1C. This work provides a new light on the fabrication of biodegradable separators for LIBs via a novel and cost-effective strategy., Competing Interests: Declaration of competing interest It is the original work of the authors. All the authors mutually agree that it should be submitted to Carbohydrate Polymers. The manuscript has not been published or presented elsewhere in part or in entirety and is not under consideration by another journal. The authors declare that they have no conflict of interests. There is no research involving Human Participants and/or Animals., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Lipoic acid (LA), which originates from animals and plants, is a small biomass molecule and has recently shown great application value in soft conductors. However, the severe depolymerization of LA places a significant limitation on its utilization. A strategy of using Li-bonds as both depolymerization quenchers and dynamic mediators to melt transform LA into high-performance ionoelastomers (IEs) is proposed. They feature dry networks while simultaneously combining transparency, stretchability, conductivity, self-healing ability, non-corrosive property, re-mouldability, strain-sensitivity, recyclability, and degradability. Most of the existing soft conductors' drawbacks, such as the tedious synthesis, non-renewable polymer networks, limited functions, and single-use only, are successfully solved. In addition, the multi-functions allow IEs to be used as soft sensors in human-computer interactive games and wireless remote sports assistants. Notably, the recycled IE also provides an efficient conductive filler for transparent ionic papers, which can be used to design soft transparent triboelectric nanogenerators for energy harvesting and multidirectional motion sensing. This work creates a new direction for future research involving intelligent soft electronics., (© 2022 Wiley-VCH GmbH.)