Search

Parametric optimization always plays important roles in bioengineering systems to obtain a high product yield under the proper conditions. The parametric conditions of lactic acid production by homologous batch fermentation of Lactobacillus pentosus cells was optimized by the Box-Behnken design. The highest l-lactic acid yield was obtained as 0.836 ± 0.003 g/g glucose with the productivity of 0.906 ± 0.003 g/(L × H) under the optimum conditions of 34.7 °C, pH 6.2, 148 rpm agitation speed, and 9.3 g/L nitrogen source concentration determined by quadratic response surface with high accuracy. The adequate kinetic models of cell growth rate, lactic production rate, and glucose consumption rate were also established to describe the fermentation behavior of L. pentosus cells with the correlation coefficients of 09985, 0.9990, and 0.9989, respectively., (© 2020 International Union of Biochemistry and Molecular Biology, Inc.)

In this study, the immobilization technology was used to improve the LA yield and shorten the fermentation time. The optimum conditions to immobilize Lactobacillus pentosus ATCC 8041 cell were determined by Taguchi design L16 (4 5 ). The immobilized L. pentosus ATCC 8041 cells prepared by 2% sodium alginate (SA) and 6% polyvinyl alcohol (PVA) with the immobilization process by 0.10 M calcium chloride (CaCl 2 ) and 2.5% boric acid (H 3 BO 3 ) had the best performance of LA yield at the temperature of 35 °C, which is significantly higher than that of L. pentosus ATCC 8041 free cells. These cells maintained the stable and efficient performance in 15 repeated batch fermentation, and they also have excellent mechanical strength to keep from breakage caused by cell growth and agitation.

The aim of this work was to study the solid waste (manure) produced by catfish as a potential feedstock for the production of lactic acid (LA) via fermentation. The solid waste contains high levels of both carbohydrates and nutrients that are sufficient for LA bacteria. Simultaneous saccharification and co-fermentation (SSCF) was applied using enzyme and Lactobacillus pentosus, and different loadings of enzyme and solid waste were tested. Results showed LA concentrations of 35.7 g/L were obtained at 15% solids content of catfish waste. Because of the high nutrient content in the fish waste, it could also be used as supplementary substrate for nitrogen and carbon sources with other lignocellulosic materials. A combined feedstock of catfish waste and paper mill sludge was tested, increasing the final LA concentration to 43.1 g/L at 12% solids loading. The catfish waste was shown to be a potential feedstock to provide both carbon and nutrients for LA production, suggesting its use as a sole substrate or in combination with other lignocellulosic materials.

The availability of fermentable sugars in high concentrations in the sap of felled oil palm trunks and the thermophilic nature of the recently isolated Bacillus coagulans strain 191 were exploited for lactic acid production under non-sterile conditions. Screening indicated that strain 191 was active toward most sugars including sucrose, which is a major component of sap. Strain 191 catalyzed a moderate conversion of sap sugars to lactic acid (53%) with a productivity of 1.56 g/L/h. Pretreatment of oil palm sap (OPS) using alkaline precipitation improved the sugar fermentability, providing a lactic acid yield of 92% and productivity of 2.64 g/L/h. To better characterize potential inhibitors in the sap, phenolic, organic, and mineral compounds were analyzed using non-treated sap and saps treated with activated charcoal and alkaline precipitation. Phthalic acid, 3,4-dimethoxybenzoic acid, aconitic acid, syringic acid, and ferulic acid were reduced in the sap after treatment. High concentrations of Mg, P, K, and Ca were also precipitated by the alkaline treatment. These results suggest that elimination of excess phenolic and mineral compounds in OPS can improve the fermentation yield. OPS, a non-food resource that is readily available in bulk quantities from plantation sites, is a promising source for lactic acid production.

A novel antimicrobial packaging material was obtained by incorporating cinnamon essential oil/β-cyclodextrin inclusion complex (CEO/β-CD-IC) into polylacticacid (PLA) nanofibers via electrospinning technique. The CEO/β-CD-IC was prepared by the co-precipitation method and SEM and FT-IR spectroscopy analysis indicated the successful formation of CEO/β-CD-IC, which improved the thermal stability of CEO. The CEO/β-CD-IC was then incorporated into PLA nanofibers by electrospinning and the resulting PLA/CEO/β-CD nanofilm showed better antimicrobial activity compared to PLA/CEO nanofilm. The minimum inhibitory concentration (MIC) of PLA/CEO/β-CD nanofilm against Escherichia coli and Staphylococcus aureus was approximately 1 mg/ml (corresponding CEO concentration 11.35 μg/ml) and minimum bactericidal concentration (MBC) was approximately 7 mg/ml (corresponding CEO concentration 79.45 μg/ml). Furthermore, compared with the casting method, the mild electrospinning process was more favorable for maintaining greater CEO in the obtained film. The PLA/CEO/β-CD nanofilm can effectively prolong the shelf life of pork, suggesting it has potential application in active food packaging., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

Tissue engineering makes use of the principles of biology and engineering to sustain 3D cell growth and promote tissue repair and/or regeneration. In this study, macro/microporous scaffold architectures have been developed using a hybrid solid freeform fabrication/thermally induced phase separation (TIPS) technique. Poly(lactic-co-glycolic acid) (PLGA) dissolved in 1,4-dioxane was used to generate a microporous matrix by the TIPS method. The 3D-bioplotting technique was used to fabricate 3D macroporous constructs made of polyethylene glycol (PEG). Embedding the PEG constructs inside the PLGA solution prior to the TIPS process and subsequent extraction of PEG following solvent removal (1,4-dioaxane) resulted in a macro/microporous structure. These hierarchical scaffolds with a bimodal pore size distribution (<50 and >300 μm) contained orthogonally interconnected macro-channels generated by the extracted PEG. The diameter of the macro-channels was varied by tuning the dispensing parameters of the 3D bioplotter. The in vitro cell culture using murine MC3T3-E1 cell line for 21 days demonstrated that these scaffolds could provide a favorable environment to support cell adhesion and growth.

Developing coatings on implant surface as drug carriers can reduce organ toxicity and effectively deliver drug locally to the target compared with the oral approach. Titanium dioxide (TiO2) nanotube has great potential for this application for widely used Ti implants because of its high surface area, ability to promote bone growth, and biocompatibility. However, there are two issues needed to be solved before further advancing TiO2 nanotubes technology as drug carriers: uncontrolled drug release and poor mechanical properties. In this study, a drug carrier using a composite of biodegradable polymer/TiO2 nanotubes is engineered. Ibuprofen is selected as a concept drug because it is a commonly used anti-inflammatory, fever, and pain-reducing drug. In addition, ibuprofen has a very short plasma half-life of only 1-3 h. A simple characterization method is developed to investigate the infiltration of polymer into TiO2 nanotubes. Good infiltration was observed of polymer into TiO2 nanotubes. The synthesized drug carrier demonstrated much better sustained drug release profiles for ibuprofen of 5 days (low-molecular-weight polymer) and 9 days (high-molecular-weight polymer) compared with 30 min of pure TiO2 nanotubes. The drug carrier also exhibited much improved mechanical strength and flexibility compared with pure TiO2 nanotubes., (Copyright © 2013 Wiley Periodicals, Inc.)