Search

Synthetic models, also called "surrogates", are commonly used in wound ballistics in order to simulate human tissues. Despite several surrogates are worldwide accepted and used; some of them have not been yet fully validated and their limits for forensic reconstructions have not been deeply investigated yet. In this work we present a homicide/suicide case involving three gunshots to the head with bullets retained in the skull or beneath the scalp. Reconstruction of these cases was performed preparing three individual synthetic head models based on post-mortem computed tomography (PMCT) measurements. Ballistic soap, polyurethane plates and 10% ballistic gelatine at 4°C were used as simulants in individually adapted thickness. Ballistic tests were performed using the questioned firearm and ammunition type. The damages on the synthetic models have been compared to the findings in PMCT and autopsy of the victims. Although the results highlighted general similarities in terms of injury characteristics, some of the experimental shots overpenetrated. Furthermore, the bullets recovered in the synthetic models did not show the same quality of deformations as the questioned bullets. This lack of bullet deformation in the synthetic models might be mainly attributed to the physical difference between real bones and polyurethane surrogate. [ABSTRACT FROM AUTHOR]

Gun violence is a global phenomenon with regional variation in frequency and severity. Handguns are often used in violent deaths such as suicides and homicides. Hence, ballistic trauma is a critical subject of forensic investigations. Trauma patterns are fundamental evidence for the reconstruction of the incident and for the determination of the manner of death. This study investigated the differences in trauma patterns with a series of experiments using six different calibers (.22 LR, .38 Special, .380 ACP, 9×19mm, .40 S&W, and .45 ACP) and four different bullet types. Synbone® spheres (polyurethane bone proxies) were used for close range 30cm simulated executions. The polyurethane spheres constitute an excellent proxy for human crania at the macroscopic level as suggested by other studies. The results showed that the radius of the entrance wound is positively correlated (Pearson's correlation coefficient R=0.846, p<0.05) with the caliber dimension. As muzzle velocity increased, endocranial beveling increased. Bullet weight, conversely, does not seem to have an effect on the size of the endocranial beveling present in Synbone® spheres. The ballistic experiments exhibited similarities in entrance wound morphology; radial and concentric fracture patterns, hydraulic burst effect, circumferential delamination, and endocranial beveling with that of documented forensic cases with corresponding caliber shot. Synbone spheres seem appropriate for ballistic simulations of cranial injuries; yet, more research is needed to verify these observations. [ABSTRACT FROM AUTHOR]

There is a need to study the biomechanical response of the head to blunt ballistic impact. While the frequency of less-lethal munition impacts to the head may be less than other vital body regions, more serious injuries have been attributed to these impacts. This study aims to establish biomechanical response corridors for the temporo-parietal region for future development of biomechanical surrogate devices. Seven unembalmed post-mortem human subject specimens were exposed to blunt ballistic temporoparietal head impact (103 g, 38 mm diameter impactor) to determine the force-time, deformation-time, and force-deformation responses. Comparisons were made to responses from prior blunt ballistic head impact studies, as well as automotive-related impact studies. Peak forces for impact condition A (19.5 ±2.6 m/s) were 3659 ± 1248 N with deformations at peak force of 7.3 ± 2.] mm. Peak forces for impact condition B (33.6± 1.4 m/s) were 5809 ± 1874 N with deformations at peak force of 9.9 ± 2.6 mm. Seven fractures were produced in the seven specimens. Depressed comminuted fracture types were documented in six of the seven cases. The average stiffness of the temporo-parietal region under blunt ballistic impact was 0.46 ± 0.14 kN/mm. Stiffness results indicate that the response of the temporo-parietal region is similar to the forehead under blunt ballistic loading conditions. In addition, the response is significantly less stiff when compared with temporo-parietal impacts performed in automotive-related studies. These data provide the foundation for future research in the area of blunt ballistic head impact research including the development of biomechanical surrogates and computational models. [ABSTRACT FROM AUTHOR]