Search

To alleviate the fire hazard of epoxy resin (EP), an efficient flame retardant (ADM) containing phosphophenanthrene and thiazole groups is synthesized and used as co-curing agent for 4,4′-diaminodiphenyl methane to prepare EP/ADM composites. EP/4 mass% ADM composites with phosphorus content of only 0.25 mass% reach UL-94 V-0 rating and the limiting oxygen index value is high to 35.8%. The results reveal that the peak heat release rate, total smoke production, and total heat release of EP/4 mass% ADM composites are reduced by 24%, 14.4% and 16.7%, respectively, in comparison with those of pure EP. The improvement in flame retardancy is mainly attributed to the decomposition of DOPO which produces HPO• and PO• to capture the reactive radicals in the gaseous phase. The thiazole group releases hindered amine groups and inactive gas with a dilution effect in the gaseous phase thus further enhancing the effect of the phosphophenanthrene group. Besides, ADM helps to increase the glass transition temperature (Tg) of EP/ADM composites, which is 176 °C for EP/4 mass% ADM composites, which is higher than the value (172 °C) of EP. [ABSTRACT FROM AUTHOR]

Epoxy resin (EP) has been widely used in coatings, adhesives, and composites. However, EP is flammable with severe smoke production. The addition of flame retardant fillers into EP can effectively improve its flame retardancy, but often brings mechanical reduction to EP. Herein, a high‐effective boron‐containing flame‐retardant (2‐phenyl‐1,3,2‐dioxaborolan‐4‐yl) methanamine ammonium polyphosphate (PBMA‐APP) is synthesized and introduced into EP to improve the fire resistance and the impact toughness. With the addition of 6% PBMA‐APP, the fire performance of EP is significantly improved. The Underwriters Laboratories‐94 rating is increased to V‐0, the total heat release and total smoke production (TSP) are reduced by 30% and 32%, respectively. It is proposed that the synergistic effect among B, N, and P in PBMA‐APP promoted the char formation of EP. The addition of 6% PBMA‐APP into EP causes little effect on tensile strength but increases the impact strength of EP to 11.2 kJ m−2. This work has proposed a possible strategy to develop a high‐efficient flame retardant for thermosetting resins. [ABSTRACT FROM AUTHOR]

One of the current challenges in the development of flame retardants is the preparation of an environmentally friendly multi-element synergistic flame retardant to improve the flame retardancy, mechanical performance, and thermal performance of composites. This study synthesized an organic flame retardant (APH) using (3-aminopropyl) triethoxysilane (KH-550), 1,4-phthalaadehyde, 1,5-diaminonaphthalene, and 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) as raw materials, through the Kabachnik-Fields reaction. Adding APH to epoxy resin (EP) composites could greatly improve their flame retardancy. For instance, UL-94 with 4 wt% APH/EP reached the V-0 rating and had an LOI as high as 31.2%. Additionally, the peak heat release rate (PHRR), average heat release rate (AvHRR), total heat release (THR), and total smoke produced (TSP) of 4% APH/EP were 34.1%, 31.8%, 15.2%, and 38.4% lower than EP, respectively. The addition of APH improved the mechanical performance and thermal performance of the composites. After adding 1% APH, the impact strength increased by 15.0%, which was attributed to the good compatibility between APH and EP. The TG and DSC analyses revealed that the APH/EP composites that incorporated rigid naphthalene ring groups had higher glass transition temperatures (Tg) and a higher amount of char residue (C700). The pyrolysis products of APH/EP were systematically investigated, and the results revealed that flame retardancy of APH was realized by the condensed-phase mechanism. APH has good compatibility with EP, excellent thermal performance, enhanced mechanical performance and rational flame retardancy, and the combustion products of the as-prepared composites complied with the green and environmental protection standards which are also broadly applied in industry. [ABSTRACT FROM AUTHOR]

A unique mono-component intumescent flame retardant, named PPy-MAPP, of which melamine-coated ammonium polyphosphate (MAPP) was microencapsulated by polypyrrole (PPy), was synthesized and carefully characterized. The obtained PPy-MAPP was applied to epoxy resin (EP) for obtaining flame-retarded EP composites. The results show that PPy-MAPP imparts better flame retardancy and smoke suppression properties to EP compared to the same addition of MAPP. The EP composite with 15 wt% PPy-MAPP easily passes the UL94 V-0 rating and achieves an LOI value of 42.4%, accompanied by a 61.9% reduction in total heat release (THR) and a 73.9% reduction in total smoke production (TSP) when compared with pure EP. The char residue analysis shows that PPy-MAPP can promote a generation of more phosphorus-rich structures in the condensed phase that improve the integrity and intumescence of char against fire. The mechanical test indicates that PPy-MAPP has a less negative effect on the tensile strength and elastic modulus of epoxy resin due to the good compatibility between PPy-MAPP and the EP matrix, as supported by differential scanning calorimetry (DSC) analyses. In this paper, these attractive features of PPy-MAPP provide a new strategy to prepare satisfactory flame retardant and super flame retarding EP composites. [ABSTRACT FROM AUTHOR]

• Mn 3 CoO x was prepared to enhance the fire safety of epoxy resins (EP). • Mn 3 CoO x impressively reduced pHRR and pSPR by 47.5 % and 34.6 %, respectively. • Mn 3 CoO x can effectively catalyze the transformation of hazardous gases. • Recovery of Mn 3 CoO x to 90.0 % in EP composite. The development of metal oxide flame retardants that are easy to synthesize, efficient, and recyclable would be more beneficial to circular economy. In this work, a porous core-shell Mn 3 CoO x was developed to efficiently reduce heat, smoke as well as hazardous gas during the combustion of epoxy resin (EP). Compared with pure EP, the peak heat release rate (pHRR), total heat release (THR), peak smoke production rate (pSPR), total smoke production (TSP), peak CO production rate (pCOPR), and peak CO 2 production rate (pCO 2 PR) of EP/Mn 3 CoO x are reduced by 47.5 %, 21.5 %, 34.6 %, 17.6 %, 58.6 %, and 55.4 %, respectively. It has been shown that Mn 3 CoO x not only catalyzes the formation of high-quality char layer but also effectively catalyzes the conversion of hazardous gas products into CO 2. Recovery experiments of Mn 3 CoO x filler in EP composites show that the recovery of Mn 3 CoO x can reach 90.0 %. This work provides insights into the design of efficient metal oxide flame retardants and ideas for the development of recycled flame retardants. [Display omitted] [ABSTRACT FROM AUTHOR]

A novel diaminodiphenylmethane (DDM) modified ammonium polyphosphate (APP) flame retardant, DDP, was successfully synthesized via ion-exchange reaction. DDP was introduced into epoxy resins (EPs) to reduce flammability. A comparable level of DDP exerts better flame-retardant and smoke suppression efficiencies in EP than APP. An EP blend containing 15 wt% DDP displays a limiting oxygen index (LOI) value of 37.1% and a UL 94 V-0 rating, and further exhibits a 32.3% reduction in total heat release and a 48.0% reduction in total smoke production compared with pure EP. The presence of DDP greatly facilitates char formation during combustion, and the char mass from thermal decomposition of an EP blend is 37.8% smaller than that of an EP blend containing 15 wt% DDP at 800 °C. The incorporation of DDP into EP blends has a smaller impact on the glass transition temperature and tensile strength than those of a comparable level of APP. This reflects the better compatibility of DDP with the EP matrix compared with that for APP. [ABSTRACT FROM AUTHOR]

• A phosphaphenanthrene/benzimidazolone-containing flame retardant (POBDBI) was synthesized successfully. • POBDBI imparted excellent flame retardancy and smoke suppression to EP. • POBDBI exerted flame-retardant effect both in condensed phase and gaseous phase. A novel flame retardant POBDBI was generated by the reaction of p-dibenzaldehyde, 5-amino-2-benzimidazolinone and 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO), and employed to epoxy resin. The structure of POBDBI was measured by FT-IR and NMR tests. Then flame-retardant EP was fabricated by using POBDBI as a flame-retardant. The thermal stability, flame-retardant performance and fire behavior were investigated by a serious of comprehensive instruments. Combustion tests show the flame-retardant performance of composite materials has been significantly improved. For example, the EP/POBDBI-1.0 with the phosphorus content of 1.0% accorded a V-0 rating and its limiting oxygen index (LOI) value increased to 36.5%. Besides, total smoke production (TSP), peak heat release rate (PHRR) and total heat release (THR) of EP/POBDBI-1.0 dropped significantly, and the corresponding values were decreased by 48.4%, 48.9% and 8.7%, respectively. At the same time, the composition, morphology of chars and gaseous products of POBDBI were studied by X-ray photoelectron spectroscopy (XPS), FT-IR, scanning electron microscope (SEM) and Py-GC/MS. These results presented that POBDBI could not only exerted free radical capture effect, but also enhanced the density of char residue. [ABSTRACT FROM AUTHOR]