Search

High-power vacuum electron devices (VEDs) are attractive, because of their broad applications, such as advance radars, electromagnetic warfare, and plasma reactors. In this paper, a Ka band mega-watt sheet electron beam traveling wave tube (TWT) is reported. A two-staged rectangular waveguide grating slow wave structure (SWS) driven by a sheet electron beam (20 mm × 1 mm, 164.8 kV, 850 A, 20 ns) is used in this TWT. In order to suppress the self-excited oscillation, a rectangular BeO attenuator is inserted between the two-staged SWSs. The experimental results show that the TWT can produce more than 2 MW output power from 34.2 to 35.5 GHz. And the maximum output power is 4.24 MW at 35 GHz, corresponding to the gain of 25.9 dB. In the future, the TWT will be used to perform research on biomedical effects and imaging. [ABSTRACT FROM AUTHOR]

In order to alleviate the problem of achieving large powers beyond 10 kW at frequencies as high as 220 GHz, a two-stage, two-sheet-beam relativistic TWT (SBRTWT) was proposed. For one-stage SBRTWT, there exists instability phenomenon as the effect of electron noise will become large enough compared with the small input power. To avoid the effect, the gain of the first-stage tube was decreased, and its output power was employed to drive the second-stage tube. A large-width branch-guide energy coupler was proposed, analyzed and designed, which can solve the difficult problem to couple the amplified microwave from a wide waveguide to another wide waveguide. A two-beam SBRTWT of 70 kW output with a gain of 28.5 dB was predicted. The findings establish that the two-stage configuration provides larger output powers than the single-stage configuration of SBRTWT and call for further research in two-stage SBRTWT. [ABSTRACT FROM PUBLISHER]

A novel slow wave structure (SWS) named angular log-periodic meander-line is proposed for a radial traveling wave tube (TWT). In this paper, a 30 log-periods microstrip angular log-periodic meander-line SWS is studied. The dispersion of this kind of SWS is weak, which shows that it can work in a wide operating bandwidth. The more important advantage is that the operating voltage is much lower than that of the conventional TWT at the same operating frequency and the geometrical dimension is also much smaller than that of the conventional TWT. The beam–wave interaction of the angular log-periodic meander-line TWT is calculated using the particle-in-cell method. When the operating voltage is 1624 V, this kind of TWT can give 156.5-W output power at 35 GHz, the gain is 21.9 dB, and the electron efficiency is \sim17.7\%. With this kind of TWT as mentioned, the concept of radial integrated angular log-periodic meander-line TWT is proposed, which can provide a new way to obtain higher output power. [ABSTRACT FROM PUBLISHER]

An attenuator supporting meander-line (ASML) slow wave structure (SWS) is proposed for a Ka-band traveling wave tube (TWT) and studied by simulations and experiments. The ASML SWS simplifies the fabrication and assembly process of traditional planar metal meander-lines (MLs) structures, by employing an attenuator to support the ML on the bottom of the enclosure rather than welding them together on the sides. To reduce the surface roughness of the molybdenum ML caused by laser cutting, the ML is coated by a thin copper film by magnetron sputtering. The measured S11 of the ML is below −20 dB and S21 varies around −8 dB to −12 dB without the attenuator, while below −40 dB with the attenuator. Particle-in-cell (PIC) simulation results show that with a 4.4-kV, 200-mA sheet electron beam, a maximum output power of 126 W is obtained at 38 GHz, corresponding to a gain of 24.1 dB and an electronic efficiency of 14.3%, respectively. [ABSTRACT FROM AUTHOR]