Search

The characteristics of a corona discharge in atmospheric pressure air are studied using pulsed power generators that produce voltage pulses of different durations, polarities and shapes. The characteristics are measured in the single pulse, batch, and repetitively pulsed modes. It is shown that no matter what the voltage pulse polarity is, a corona discharge starts developing as a conical diffuse discharge near the electrode tip with a voltage rate of increase of ~1015 Vs-1 across an electrode of small curvature radius. With lower voltage rate of increase (~1013 Vs-1 or lower), one or several diffuse jets develop from this electrode. The diameter of the jets at their front is less than 1mm and depends on many factors (voltage pulse amplitude and increase, interelectrode gap width, pulse repetition rate, etc). It is found that at long voltage pulse durations, the radiation spectrum of the corona discharge changes, and the bands and lines of the material of the electrode appear in the UV region at 200-300 nm. It is demonstrated that a runaway electron beam in a corona discharge is generated and detected at a distance several times greater than the brightly glowing plasma region of the corona discharge. It is shown that x-rays are generated from a corona discharge at high pulse repetition rates of up to 1 kHz. [ABSTRACT FROM AUTHOR]

Based on a Marx generator and a coaxial pulse forming line, an experimental investigation of surface flashover characteristics in vacuum is conducted by using nanosecond pulses of 10 ns rise time and 30 us full width at half maximum (FWHM). Insulator dielectrics chosen for this investigation are Teflon, PMMA and Nylon. The tested factors include gas pressure, cone angle of conical frustum, diameter and length of cylindrical insulator, material and shape of electrode, and contact style between insulator and electrodes. The effects of these parameters on the surface flashover characteristics are described and analyzed in this paper. In addition, the character of flashover time lag in the nanosecond range, and surface flashover theory in vacuum charged by nanosecond pulses are also discussed. [ABSTRACT FROM AUTHOR]

Pulsed discharge in a nonuniform electric field accompanied by the appearance of bright spots due to explosive electron emission on electrodes has been investigated. The experiments were carried out using three experimental setups, a voltage pulse duration at a matched load of 2 ns, 40 ns, and 130 ns, respectively. Data on the formation of electrode spots during diffuse discharges in tube-plate or needle-plate gap configurations filled with gases at elevated pressures (air, nitrogen and argon) were obtained. It was found that in the air and other gases, bright spots arise on the flat electrode, and on the negative polarity of the electrode with a small radius of curvature, during the direction change of the current through the gap and the increase of the voltage pulse duration. It was shown that at the positive polarity of the electrode with a small radius of curvature, bright spots on the flat electrode arise due to the participation of the dynamic displacement current in the gap conductance. [ABSTRACT FROM AUTHOR]

We report the experimental results with nanosecond-pulse discharges formed in the air gap between a flat electrode and a sharp electrode. The appearance of anode and cathode spots on the electrodes is studied experimentally. It is considered that bright spots on the flat cathode with positive polarity of the sharp electrode are formed due to the explosive electron emission on the cathode and the dynamic displacement current in the gap. It is also shown that with negative polarity of the sharp electrode, bright spots on the flat anode are formed after changing the polarity of the flat electrode due to the discharge oscillatory mode. Under these conditions, the explosive electron emission firstly forms on the sharp cathode. With negative polarity of the sharp electrode of the subnanosecond-pulse pulser, the runaway electron beam current is measured behind the anode foil with a time resolution of no more than 100 ps. [ABSTRACT FROM AUTHOR]