Search

Aqueous sodium-ion batteries are practically promising for large-scale energy storage, however energy density and lifespan are limited by water decomposition. Current methods to boost water stability include, expensive fluorine-containing salts to create a solid electrolyte interface and addition of potentially-flammable co-solvents to the electrolyte to reduce water activity. However, these methods significantly increase costs and safety risks. Shifting electrolytes from near neutrality to alkalinity can suppress hydrogen evolution while also initiating oxygen evolution and cathode dissolution. Here, we present an alkaline-type aqueous sodium-ion batteries with Mn-based Prussian blue analogue cathode that exhibits a lifespan of 13,000 cycles at 10 C and high energy density of 88.9 Wh kg−1 at 0.5 C. This is achieved by building a nickel/carbon layer to induce a H3O+-rich local environment near the cathode surface, thereby suppressing oxygen evolution. Concurrently Ni atoms are in-situ embedded into the cathode to boost the durability of batteries. Aqueous sodium-ion batteries show promise for large-scale energy storage, yet face challenges due to water decomposition, limiting their energy density and lifespan. Here, the authors report a cathode surface coating strategy in an alkaline electrolyte to enhance the stability of both electrolyte and battery. [ABSTRACT FROM AUTHOR]

Sodium‐on batteries (SIBs) are promising alternatives to lithium‐ion batteries (LIBs) because of the low cost, abundance, and high sustainability of sodium resources. Analogous to LIBs, the high‐capacity electrodes in SIBs always suffer from rapid capacity decay upon long‐term cycling due to the particle pulverization induced by a large volume change. Circumventing particle pulverization plays a critical role in developing high‐energy and long‐life SIBs. Herein, tetrahydroxy‐1,4‐benzoquinone disodium salt (TBDS) that can self‐heal the cracks by hydrogen bonding between hydroxyl group and carbonyl group is employed as a cathode for sustainable and stable SIBs. The self‐healing TBDS exhibits long cycle life of 1000 cycles with a high rate capability up to 2 A g−1 due to the fast Na‐ion diffusion reaction in the TBDS cathode. The intermolecular hydrogen bonding has been comprehensively characterized to understand the self‐healing mechanism. The hydrogen bonding‐enabled self‐healing organic materials are promising for developing high‐energy and long‐cycle‐life SIBs. [ABSTRACT FROM AUTHOR]

The formation of lithiophobic inorganic solid electrolyte interphase (SEI) on Li anode and cathode electrolyte interphase (CEI) on the cathode is beneficial for high‐voltage Li metal batteries. However, in most liquid electrolytes, the decomposition of organic solvents inevitably forms organic components in the SEI and CEI. In addition, organic solvents often pose substantial safety risks due to their high volatility and flammability. Herein, an organic‐solvent‐free eutectic electrolyte based on low‐melting alkali perfluorinated‐sulfonimide salts is reported. The exclusive anion reduction on Li anode surface results in an inorganic, LiF‐rich SEI with high capability to suppress Li dendrite, as evidenced by the high Li plating/stripping CE of 99.4% at 0.5 mA cm−2 and 1.0 mAh cm−2, and 200‐cycle lifespan of full LiNi0.8Co0.15Al0.05O2 (2.0 mAh cm−2) || Li (20 µm) cells at 80 °C. The proposed eutectic electrolyte is promising for ultrasafe and high‐energy Li metal batteries. [ABSTRACT FROM AUTHOR]

Nowadays, electrolytes for commercial batteries are mostly liquid solutions composed of solvent and salt to migrate the ions. However, solvents of the electrolyte bring several inherent limitations, either the electrochemical window, working temperature, volatility or flammability. Herein, we report polyphosphoric acid as a solvent-free protic liquid electrolyte, which excludes the demerits of solvent and exhibits unprecedented superiorities, including nonflammability, wider electrochemical stability window (>2.5 V) than aqueous electrolyte, low volatility and wide working temperature range (>400 °C). The proton conductive electrolyte enables MoO3/LiVPO4F rocking-chair battery to operate well in a wide temperature range from 0 °C to 250 °C and deliver a high power density of 4975 W kg−1 at a high temperature of 100 °C. The solvent-free electrolyte could provide a viable route for the stable and safe batteries working under harsh conditions, opening up a route towards designing wide-temperature electrolytes. It is challenging to prepare electrolyte that could achieve wide electrochemical window, broad working temperature, non-inflammability, and fast ion transport simultaneously. Here the authors report a rocking-chair proton battery utilizing a solvent-free protic liquid electrolyte, which could operate in a broad temperature range from 0 to 250 celsius degree. [ABSTRACT FROM AUTHOR]

Grid-scale energy storage is essential for reliable electricity transmission and renewable energy integration. Redox flow batteries (RFB) provide affordable and scalable solutions for stationary energy storage. However, most of the current RFB chemistries are based on expensive transition metal ions or synthetic organics. Here, we report a reversible chlorine redox flow battery starting from the electrolysis of aqueous NaCl electrolyte and the as-produced Cl2 is extracted and stored in the carbon tetrachloride (CCl4) or mineral spirit flow. The immiscibility between the CCl4 or mineral spirit and NaCl electrolyte enables a membrane-free design with an energy efficiency of >91% at 10 mA/cm2 and an energy density of 125.7 Wh/L. The chlorine flow battery can meet the stringent price and reliability target for stationary energy storage with the inherently low-cost active materials (~$5/kWh) and the highly reversible Cl2/Cl− redox reaction. Flow batteries provide promising solutions for stationary energy storage but most of the systems are based on expensive metal ions or synthetic organics. Here, the authors show a chlorine flow battery capitalizing the electrolysis of saltwater where the redox reaction is stabilized by the saltwater-immiscible organic flow. [ABSTRACT FROM AUTHOR]

Since the advent of the Li ion batteries (LIBs), the energy density has been tripled, mainly attributed to the increase of the electrode capacities. Now, the capacity of transition metal oxide cathodes is approaching the limit due to the stability limitation of the electrolytes. To further promote the energy density of LIBs, the most promising strategies are to enhance the cut-off voltage of the prevailing cathodes or explore novel high-capacity and high-voltage cathode materials, and also replacing the graphite anode with Si/Si–C or Li metal. However, the commercial ethylene carbonate (EC)-based electrolytes with relatively low anodic stability of ∼4.3 V vs. Li+/Li cannot sustain high-voltage cathodes. The bottleneck restricting the electrochemical performance in Li batteries has veered towards new electrolyte compositions catering for aggressive next-generation cathodes and Si/Si–C or Li metal anodes, since the oxidation-resistance of the electrolytes and the in situ formed cathode electrolyte interphase (CEI) layers at the high-voltage cathodes and solid electrolyte interphase (SEI) layers on anodes critically control the electrochemical performance of these high-voltage Li batteries. In this review, we present a comprehensive and in-depth overview on the recent advances, fundamental mechanisms, scientific challenges, and design strategies for the novel high-voltage electrolyte systems, especially focused on stability issues of the electrolytes, the compatibility and interactions between the electrolytes and the electrodes, and reaction mechanisms. Finally, novel insights, promising directions and potential solutions for high voltage electrolytes associated with effective SEI/CEI layers are proposed to motivate revolutionary next-generation high-voltage Li battery chemistries. [ABSTRACT FROM AUTHOR]

Aqueous Zn batteries promise high energy density but suffer from Zn dendritic growth and poor low‐temperature performance. Here, we overcome both challenges by using an eutectic 7.6 m ZnCl2 aqueous electrolyte with 0.05 m SnCl2 additive, which in situ forms a zincophilic/zincophobic Sn/Zn5(OH)8Cl2⋅H2O bilayer interphase and enables low temperature operation. Zincophilic Sn decreases Zn plating/stripping overpotential and promotes uniform Zn plating, while zincophobic Zn5(OH)8Cl2⋅H2O top‐layer suppresses Zn dendrite growth. The eutectic electrolyte has a high ionic conductivity of ≈0.8 mS cm−1 even at −70 °C due to the distortion of hydrogen bond network by solvated Zn2+ and Cl−. The eutectic electrolyte enables Zn∥Ti half‐cell a high Coulombic efficiency (CE) of >99.7 % for 200 cycles and Zn∥Zn cell steady charge/discharge for 500 h with a low overpotential of 8 mV at 3 mA cm−2. Practically, Zn∥VOPO4 batteries maintain >95 % capacity with a CE of >99.9 % for 200 cycles at −50 °C, and retain ≈30 % capacity at −70 °C of that at 20 °C. [ABSTRACT FROM AUTHOR]

Aqueous Zn batteries are promising energy‐storage devices. However, their lifespan is limited by irreversible Zn anodes owing to water decomposition and Zn dendrite growth. Here, we separate aqueous electrolyte from Zn anode by coating a thin MOF layer on anode and filling the pores of MOF with hydrophobic Zn(TFSI)2‐tris(2,2,2‐trifluoroethyl)phosphate (TFEP) organic electrolyte that is immiscible with aqueous Zn(TFSI)2–H2O bulk electrolyte. The MOF encapsulated Zn(TFSI)2‐TFEP forms a ZnF2‐Zn3(PO4)2 solid electrolyte interphase (SEI) preventing Zn dendrite and water decomposition. The Zn(TFSI)2‐TFEP@MOF electrolyte protected Zn anode enables a Zn||Ti cell to achieve a high average Coulombic efficiency of 99.1 % for 350 cycles. The highly reversible Zn anode brings a high energy density of 210 Wh kg−1 (of cathode and anode mass) and a low capacity decay rate of 0.0047 % per cycle over 600 cycles in a Zn||MnO2 full cell with a low capacity ratio of Zn:MnO2 at 2:1. [ABSTRACT FROM AUTHOR]

P2‐type layered oxides suffer from an ordered Na+/vacancy arrangement and P2→O2/OP4 phase transitions, leading them to exhibit multiple voltage plateaus upon Na+ extraction/insertion. The deficient sodium in the P2‐type cathode easily induces the bad structural stability at deep desodiation states and limited reversible capacity during Na+ de/insertion. These drawbacks cause poor rate capability and fast capacity decay in most P2‐type layered oxides. To address these challenges, a novel high sodium content (0.85) and plateau‐free P2‐type cathode‐Na0.85Li0.12Ni0.22Mn0.66O2 (P2‐NLNMO) was developed. The complete solid‐solution reaction over a wide voltage range ensures both fast Na+ mobility (10−11 to 10−10 cm2 s−1) and small volume variation (1.7 %). The high sodium content P2‐NLNMO exhibits a higher reversible capacity of 123.4 mA h g−1, superior rate capability of 79.3 mA h g−1 at 20 C, and 85.4 % capacity retention after 500 cycles at 5 C. The sufficient Na and complete solid‐solution reaction are critical to realizing high‐performance P2‐type cathodes for sodium‐ion batteries. [ABSTRACT FROM AUTHOR]

Zn metal has been regarded as the most promising anode for aqueous batteries due to its high capacity, low cost, and environmental benignity. Zn anode still suffers, however, from low Coulombic efficiency due to the side reactions and dendrite growth in slightly acidic electrolytes. Here, the Zn plating/stripping mechanism is thoroughly investigated in 1 m ZnSO4 electrolyte, demonstrating that the poor performance of Zn metal in mild electrolyte should be ascribed to the formation of a porous by‐product (Zn4SO4(OH)6·xH2O) layer and serious dendrite growth. To suppress the side reactions and dendrite growth, a highly viscoelastic polyvinyl butyral film, functioning as an artificial solid/electrolyte interphase (SEI), is homogeneously deposited on the Zn surface via a simple spin‐coating strategy. This dense artificial SEI film not only effectively blocks water from the Zn surface but also guides the uniform stripping/plating of Zn ions underneath the film due to its good adhesion, hydrophilicity, ionic conductivity, and mechanical strength. Consequently, this side‐reaction‐free and dendrite‐free Zn electrode exhibits high cycling stability and enhanced Coulombic efficiency, which also contributes to enhancement of the full‐cell performance when it is coupled with MnO2 and LiFePO4 cathodes. [ABSTRACT FROM AUTHOR]

Development of electrolytes that simultaneously have high ionic conductivity, wide electrochemical window, and lithium dendrite suppression ability is urgently required for high‐energy lithium‐metal batteries (LMBs). Herein, an electrolyte is designed by adding a countersolvent into LiFSI/DMC (lithium bis(fluorosulfonyl)amide/dimethyl carbonate) electrolytes, forming countersolvent electrolytes, in which the countersolvent is immiscible with the salt but miscible with the carbonate solvents. The solvation structure and unique properties of the countersolvent electrolyte are investigated by combining electroanalytical technology with a Molecular Dynamics simulation. Introducing the countersolvent alters the coordination shell of Li+ cations and enhances the interaction between Li+ cations and FSI− anions, which leads to the formation of a LiF‐rich solid electrolyte interphase, arising from the preferential reduction of FSI− anions. Notably, the countersolvent electrolyte suppresses Li dendrites and enables stable cycling performance of a Li||NCM622 battery at a high cut‐off voltage of 4.6 V at both 25 and 60 °C. This study provides an avenue to understand and design electrolytes for high‐energy LMBs in the future. [ABSTRACT FROM AUTHOR]

The lack of high‐power and stable cathodes prohibits the development of rechargeable metal (Na, Mg, Al) batteries. Herein, poly(hexaazatrinaphthalene) (PHATN), an environmentally benign, abundant and sustainable polymer, is employed as a universal cathode material for these batteries. In Na‐ion batteries (NIBs), PHATN delivers a reversible capacity of 220 mAh g−1 at 50 mA g−1, corresponding to the energy density of 440 Wh kg−1, and still retains 100 mAh g−1 at 10 Ag−1 after 50 000 cycles, which is among the best performances in NIBs. Such an exceptional performance is also observed in more challenging Mg and Al batteries. PHATN retains reversible capacities of 110 mAh g−1 after 200 cycles in Mg batteries and 92 mAh g−1 after 100 cycles in Al batteries. DFT calculations, X‐ray photoelectron spectroscopy, Raman, and FTIR show that the electron‐deficient pyrazine sites in PHATN are the redox centers to reversibly react with metal ions. [ABSTRACT FROM AUTHOR]

The redox chemistry of magnesium and its application in rechargeable Mg batteries has received increasing attention owing to the unique benefits of Mg metal electrodes, namely high reversibility without dendrite formation, low reduction potentials, and high specific capacities. The Mg/S couple is of particular interest owing to its high energy density and low cost. Previous reports have confirmed the feasibility of a rechargeable Mg/S battery; however, only limited cycling stability was achieved, and the complicated procedure for the preparation of the electrolytes has significantly compromised the benefits of Mg/S chemistry and hindered the development of Mg/S batteries. Herein, we report the development of the first rechargeable Mg/S battery with a MgTFSI2/MgCl2/DME electrolyte (DME=1,2-dimethoxyethane, TFSI=bis(trifluoromethanesulfonyl)imide) and realize the best cycling stability among all reported Mg/S batteries by suppressing polysulfide dissolution. Mechanistic studies show that the battery works via S0/MgS x redox processes and that the large voltage hysteresis is mainly due to the Mg anode overpotential. [ABSTRACT FROM AUTHOR]

Bipolar materials, which work as both the cathode and anode material in aqueous sodium-ion batteries, have advantages over aqueous electrolytes such as the low cost of sodium and high convenience of the material processing. However, the available materials are greatly limited. Herein, Prussian blue FeFe(CN)6 nanocubes were successfully synthesized by using a modified co-precipitation method. Owing to the well-separated redox reactions, fair cycling stability and rate capability of FeFe(CN)6, it could be developed as a bipolar material in an aqueous sodium-ion battery. The as-obtained full battery exhibits good cycling stability and rate capability. It was able to deliver a capacity of 32 mAhg-1 at 20 C, 76% of the capacity at 2 C. After 200 cycles at 2 C, 97% of the initial capacity was maintained for this battery, which suggests good cycling stability. [ABSTRACT FROM AUTHOR]

Highly Li‐ion conductive Li4(BH4)3I@SBA‐15 is synthesized by confining the LiI doped LiBH4 into mesoporous silica SBA‐15. Uniform nanoconfinement of P63mc phase Li4(BH4)3I in SBA‐15 mesopores leads to a significantly enhanced conductivity of 2.5 × 10−4 S cm−1 with a Li‐ion transference number of 0.97 at 35 °C. The super Li‐ion mobility in the interface layer with a thickness of 1.2 nm between Li4(BH4)3I and SBA‐15 is believed to be responsible for the fast Li‐ion conduction in Li4(BH4)3I@SBA‐15. Additionally, Li4(BH4)3I@SBA‐15 also exhibits a wide apparent electrochemical stability window (0 to 5 V vs Li/Li+) and a superior Li dendrite suppression capability (critical current density 2.6 mA cm−2 at 55 °C) due to the formation of stable interphases. More importantly, Li4(BH4)3I@SBA‐15‐based Li batteries using either high‐capacity sulfur cathode or high‐voltage oxide cathode show excellent electrochemical performances, making Li4(BH4)3I@SBA‐15 a very attractive electrolyte for next‐generation all‐solid‐state Li batteries. A super ionic conductor Li4(BH4)3I@SBA‐15 for all‐solid‐state Li batteries is reported. It shows a Li‐ion conductivity of 2.4 × 10−4 S cm−1 at 35 °C and exhibits excellent electrochemical stability and electrode compatibility in the potential window of 0 to 5 V, as it can work well in Li–Li4Ti5O12, Li–S, and Li–LiCoO2 all‐solid‐state cells at 55 °C. [ABSTRACT FROM AUTHOR]

Li metal, with the lowest thermodynamically achievable negative electrochemical potential and the highest specific capacity (3860 mAh g−1), is the ultimate anode choice for Li batteries. However, the highest reported Li plating/stripping Coulombic efficiency (CE) of 99.5% after extensive efforts is still too low for the Li metal-free (all the Li metal in cycling comes from cathode, without anode pre-lithiation) Li metal batteries. The low CE is attributed to both non-uniform Li plating/stripping on the lithiophobic Cu current collector and Li dendrite growth through lithiophilic organic–inorganic solid electrolyte interphase (SEI) formed in carbonate electrolytes. Here, we use a lithiophilic Bismuth graphite blend (Bi–Gr) substrate to replace lithiophobic Cu current collector to seed a uniform Li nucleation, and form a lithiophobic LiF-rich SEI rather than lithiophilic organic-rich SEI to suppress Li dendrite growth. Molecular dynamics simulations reveal the preferential reduction of anions in 2.0 M LiPF 6 in tetrahydrofuran/2-methyl tetrahydrofuran (2.0 M LiPF 6 –mixTHF) electrolyte to generate LiF-rich SEI on plated Li. Bi–Gr substrate and 2.0 M LiPF 6 –mixTHF electrolyte enable the Li anodes to achieve a record high CE of 99.83% at a high capacity of 1.0 mAh cm−2 and current of 0.5 mA cm−2. The Bi particles serve as dispersed nucleation centers that promote uniform Li deposition with strong adhesion to the substrate to avoid dead Li, while the lithiophobic LiF-rich SEI promotes lateral Li growth and suppresses the vertical Li dendrite growth even at a high current density of 3.0 mA cm−2 and high areal capacities of 3.0 mAh cm−2. The regulation of Li nucleation and growth enables the Li metal-free LiFePO 4 full cells to achieve 100 cycles at a practical areal capacity of >2.0 mAh cm−2. This manuscript highlights the benefits of simultaneous substrate design to improve Li nucleation and electrolyte design to promote lithiophobic SEI growth, enabling a promising and practical route Li metal-free Li metal batteries. [ABSTRACT FROM AUTHOR]

Abstract Sodium-ion pouch cells with up to 1000 cycles are presented by using a NaNi 1/3 Fe 1/3 Mn 1/3 O 2 cathode, a hard carbon anode, and a functional electrolyte. The functional electrolyte is composed of 1 M NaPF 6 dissolved in a 1:1 (v/v) mixed solvent of propylene carbonate (PC) and ethyl methyl carbonate (EMC) with 3–4 wt% of two or three additives, including fluoroethylene carbonate (FEC), prop-1-ene-1,3-sultone (PST), and 1,3,2-Dioxathiolane-2,2-dioxide (DTD). It is shown that the capacity retentions of the cells increase to 84.4% and 92.2% after 1000 cycles for electrolytes containing FEC-PST bi-additive and FEC-PST-DTD tri-additive, respectively, as compared with that containing FEC single additive. Using X-ray photoelectron spectroscopy, inductively coupled plasma optical, and transmission electron microscopy, post-mortem analyses on the surface of the cycled electrodes indicate that PST and DTD are beneficial to the anode by forming an organic compound rich solid electrolyte interphase (SEI), and to the cathode by forming a dense and thick cathode electrolyte interphase (CEI) that consequently prevents transition metal ions from dissolving into electrolyte. Highlights • Long cycle life of sodium-ion pouch cells is obtained by using optimized electrolyte. • Multiple additives electrolyte is for the Na x Ni 1/3 Fe 1/3 Mn 1/3 O 2 //hard carbon system. • The capacity retention of cells comes up to 92% after 1000 cycles. • SEI on the anode and CEI on the cathode are forming to protect electrodes. [ABSTRACT FROM AUTHOR]

Abstract: Croconic acid disodium salt (CADS), a renewable or recyclable organic compound, is investigated as an anode material in sodium ion battery for the first time. The pristine micro-sized CADS delivers a high capacity of 246.7 mAh g−1, but it suffers from fast capacity decay during charge/discharge cycles. The detailed investigation reveals that the severe capacity loss is mainly attributed to the pulverization of CADS particles induced by the large volume change during sodiation/desodiation rather than the generally believed dissolution of CADS in the organic electrolyte. Minimizing the particle size can effectively suppress the pulverization, thus improving the cycling stability. Wrapping CADS with graphene oxide by ultrasonic spray pyrolysis can enhance the integration and conductivity of CADS electrodes, thus providing a high capacity of 293 mAh g−1. [Copyright &y& Elsevier]

Abstract: Carbon coated porous hollow Na2FePO4F (C/Na2FePO4F) spheres with 500 nm diameter and 80 nm wall thickness are synthesized by a one-step template-free ultrasonic spray pyrolysis process using sucrose as the carbon source. Nano-sized porous hollow C/Na2FePO4F spheres allow electrolyte to penetrate into the hollow structure, and thus the electrochemical reaction can take place on both the outside and inside surface and in the pores. Also, the carbon coating on Na2FePO4F hollow spheres enhances the electronic conductivity and charge transfer reaction kinetics. The unique carbon coated porous hollow C/Na2FePO4F cathodes deliver 89 mAh g−1 capacity at a low rate of 0.1C, and 75 mAh g−1 at 1C, and maintains 33% of capacity at 9C. After 750 cycles at 1C, C/Na2FePO4F cathodes can still provide 60 mAh g−1, which is 80% of initial capacity. The significant advance in electrochemical performance of hollow C/Na2FePO4F spheres combined with mature aerosol spray synthesis technology make these carbon coated porous hollow C/Na2FePO4F spheres very promising as cathode materials for practical applications in Na-ion batteries. [Copyright &y& Elsevier]

Aqueous zinc batteries could offer a high theoretical energy density at an economical cost. However, their broader applications are limited by low practical energy density and poor reversibility of the Zn anode. In this work, we demonstrate that a water-in-salt electrolyte based on zinc and lithium salts enables dendrite-free Zn plating/stripping at a high coulombic efficiency of nearly 100%. The electrolyte also enables Zn/LiFePO 4 full battery to achieve a high energy density of 107.5 Wh kg−1 and maintain 70% of energy density after 1000 cycle at a 3C rate. Unlabelled Image • Water-in-salt electrolyte could increase the Zn metal reversibility by promoting the columbic efficiency and suppressing the dendrite formation. • Full cell provides high energy density (107.5 Wh kg−1), volume energy density (157.8 Wh L−1) and excellent cycle performance. [ABSTRACT FROM AUTHOR]

• LLZNO nanoparticles coated LiCoO 2 cathodes are synthesized by a sol-gel method. • 3D ionic/electronic conducting networks inside the cathodes are constructed. • A reactive intermediate layer of PP13-TFSI is introduced in cathode/garnet interface. • A solid electrolyte interphase composed of LiF, Li 3 N, Li 2 S and Li 2 O is in situ formed. The garnet solid electrolyte battery confronts crucial challenges of electronic/ionic conduction inside the cathode and interfacial contact between the cathode and the electrolyte. In this report, a super ion/electron conductive LiCoO 2 (LCO) material is fabricated by partially coating nano Li 6.375 La 3 Zr 1.375 Nb 0.625 O 12 (LLZNO) electrolyte on LCO and then filling Super P carbons into the uncoated space. This configuration offers continuous ionically and electronically conducting networks inside the LCO cathode. In addition, an intermediate layer of N-Methyl-N-propylpiperidinium bis(trifluoromethanesulfonyl)imide (PP13-TFSI) is introduced in between the composite cathode and the garnet electrolyte to form a solid-state ionically conducting interphase during charge/discharge cycles. Through the above interfacial engineering, the solid garnet batteries based on LiCoO 2 run as long as 400 cycles with the capacity retention of 80.2% at 0.2 C and 60 °C. [ABSTRACT FROM AUTHOR]