Search

Within the frame of the International DORIS Service (IDS), the CNES/CLS Analysis Center contributes to the geodetic and geophysical research activity through DORIS data analysis. A strategy was developed for the processing of the measurements of the DGXX instruments in RINEX/DORIS format, as it will be the only type of DORIS format made available by CNES, starting with the Jason-3 and Sentinel-3A missions launched at the beginning of the year 2016. The purpose of this paper is to describe the method implemented in the CNES/CLS Analysis Center orbit computation software GINS to process RINEX/DORIS data files. Phase measurements are converted into Doppler counts and then into relative satellite-to-beacon velocities. In this approach, the iono-free phase centers have to be used as the end points of the measurement instead of the 2 GHz phase centers. Given that, the processing results with RINEX/DORIS data are similar to the ones obtained with the usual doris2.2 data, except the scale factor of the Terrestrial Reference Frame in the 7-parameter transform of the network solution. We also address the issue of the scale factor increase from 2012 observed by all the IDS Analysis Centers in their solutions for the ITRF2014 combination. We show that the scale increase in 2012 is dependent on the type of DORIS data used. This scale increase is also enhanced by a bias due to the inclusion of HY-2A data, but which can be eliminated by adopting different coordinates of the onboard DORIS antenna phase center. [ABSTRACT FROM AUTHOR]

Abstract: The boarding of the first DGXX DORIS instrument on Jason-2 mission gives us the opportunity to present the improvements that have been implemented on the DORIS system. The goal of this paper is to present information about the new capacities of the DORIS system and to give the current status of its components. An overview of the DORIS system, the International DORIS Service and the Jason-2 satellite mission are first presented. Then the new characteristics of the on-board instrument are detailed. The capacity to track up to seven ground beacons simultaneously dramatically increases the number of measurements performed: a factor of three increase over Jason-1 is observed at the altitude of 1330km. It also increases the diversity of directions of observation and allows low elevation measurements from 0°. The new phase measurements capability allows now phase processing. The instability of the Jason-1 USOs (Ultra-Stable Oven-controlled quartz oscillator) while crossing the South Atlantic Anomaly has been solved by decreasing the sensitivity to radiation by a factor of 10. New features of the on-board software enhance the coastal and inland water altimetry and increase the robustness of the data. The new software also improves the real time orbit accuracy for operational altimetry. The improvements introduced concurrently on the ground segment have also significantly enhanced capability. The new RINEX exchange formats provide simultaneous phase and pseudo-range measurements. The maintenance of the DORIS Beacons Network and the work done by the DORIS Signal Integrity monitoring team lead to an increased availability of the Network from 75% to 90% and so to a more homogenous orbit coverage. All these improvements including the lessons learned during the past 20years of operations have pushed the DORIS system forward to a New Age. [Copyright &y& Elsevier]