Search

Residential wood burning can be a significant wintertime source of ambient fine particles in urban and suburban areas. We developed a statistical model to predict minute (min) levels of particles with median diameter of <1 μm (PM1) from mobile monitoring on evenings of winter weekends at different residential locations in Quebec, Canada, considering wood burning emissions. The 6 s PM1 levels were concurrently measured on 10 preselected routes travelled 3 to 24 times during the winters of 2008-2009 and 2009-2010 by vehicles equipped with a GRIMM or a dataRAM sampler and a Global Positioning System device. Route-specific and global land-use regression (LUR) models were developed using the following spatial and temporal covariates to predict 1-min-averaged PM1 levels: chimney density from property assessment data at sampling locations, PM2.5 'regional background' levels of particles with median diameter of <2.5 μm (PM2.5) and temperature and wind speed at hour of sampling, elevation at sampling locations and day of the week. In the various routes travelled, between 49% and 94% of the variability in PM1 levels was explained by the selected covariates. The effect of chimney density was not negligible in 'cottage areas.' The R2 for the global model including all routes was 0.40. This LUR is the first to predict PM1 levels in both space and time with consideration of the effects of wood burning emissions. We show that the influence of chimney density, a proxy for wood burning emissions, varies by regions and that a global model cannot be used to predict PM in regions that were not measured. Future work should consider using both survey data on wood burning intensity and information from numerical air quality forecast models, in LUR models, to improve the generalisation of the prediction of fine particulate levels. [ABSTRACT FROM AUTHOR]

Abstract Environmental noise can cause important cardiovascular effects, stress and sleep disturbance. The development of appropriate methods to estimate noise exposure within a single urban area remains a challenging task, due to the presence of various transportation noise sources (road, rail, and aircraft). In this study, we developed a land-use regression (LUR) approach using a Generalized Additive Model (GAM) for LA eq (equivalent noise level) to capture the spatial variability of noise levels in Toronto, Canada. Four different model formulations were proposed based on continuous 20-min noise measurements at 92 sites and a leave one out cross-validation (LOOCV). Models where coefficients for variables considered as noise sources were forced to be positive, led to the development of more realistic exposure surfaces. Three different measures were used to assess the models; adjusted R2 (0.44–0.64), deviance (51−72%) and Akaike information criterion (AIC) (469.2–434.6). When comparing exposures derived from the four approaches to personal exposures from a panel study, we observed that all approaches performed very similarly, with values for the Fractional mean bias (FB), normalized mean square error (NMSE), and normalized absolute difference (NAD) very close to 0. Finally, we compared the noise surfaces with data collected from a previous campaign consisting of 1-week measurements at 200 fixed sites in Toronto and observed that the strongest correlations occurred between our predictions and measured noise levels along major roads and highway collectors. Our validation against long-term measurements and panel data demonstrates that manual modifications brought to the models were able to reduce bias in model predictions and achieve a wider range of exposures, comparable with measurement data. Highlights • A Generalized Additive Model (GAM) was developed to generate noise exposure surfaces. • Noise data were collected based on short-term measurements in Toronto, Canada. • Various model specifications were tested in terms of the resulting predictions. • Predictions were validated against data from a panel and from a long-term campaign. • Models that involved manual adjustments resulted in more realistic surfaces. [ABSTRACT FROM AUTHOR]

We compared numbers of trips and distances by transport mode, air pollution and health impacts of a Business As Usual (BAU) and an Ideal scenario with urban densification and reductions in car share (76%–62% in suburbs; 55%–34% in urban areas) for the Greater Montreal (Canada) for 2061. We estimated the population in 87 municipalities using a demographic model and population projections. Year 2031 (Y2031) trips (from mode choice modeling) and distances were used to estimate those of Y2061. Emissions of nitrogen dioxide (NO2) and carbon dioxide (CO2) were estimated and NO2 used with dispersion modeling to estimate concentrations. Walking and Public Transit (PT) use and corresponding distances walked in Y2061 were >70% higher for the Ideal scenario vs the BAU, while car share and distances were <40% lower. NO2 levels were slightly lower in the Ideal scenario vs the BAU, but always higher in the urban core. Health impacts, summarized with disability adjusted life years (DALY), differed between urban and suburb areas but globally, the Ideal scenario reduced the impacts of the Y2061 BAU by 33% DALY. Percentages of car and PT trips were similar for the Y2031 and Y2061 BAU but kms travelled by car, CO2 and NO2 increased, due to increased populations. Drastic measures to decrease car share appear necessary to substantially reduce impacts of transportation. • We modelled 2061 densification, telework & decrease car share (~15%) impacts. • Walking & Public Transit use were >25% higher for this scenario in Y2061. • NO2 was slightly lower in the Y2061 scenario but always higher in the urban core. • Greater decrease in DALY was noted in suburb areas (Globally Y2061 scenario > -30%). • Drastic car share reduction & densification are necessary to greatly reduce impacts. [ABSTRACT FROM AUTHOR]