Search

Recently, smart sensing/actuation paper has attracted significant interest due to its potential usage as a sustainable component in future electronics, robotics, and intelligent sensing devices. In acknowledging the importance of this topic for the engagement of students at the university level in conjunction with Industrial Revolution 4.0, it is thus quite relevant to establish an approach that can be used to educate the students about the concept of smart paper and its characteristics. To achieve this objective, we have developed a smart paper that is electrically conductive and able to act as a humidity sensor or chemical-driven actuator that can be synthesized in a facile manner through the application of candle soot and commercial crayon on each side of A4 cellulose paper (100 gsm). The sensitivity of the fabricated paper-based sensor toward room humidity is reflected in the changing rate of electrical resistance, which is visually demonstrable by the blooming of an artificial flower made from the paper after exposure to moisture vapor. In conclusion, the activities performed during the reported guidelines may assist in cultivating practical knowledge for colloidal dispersion of carbon-based nanomaterials and chemical-driven actuators among students.

In the future, learning will be essentially characterized by the ability to regulate the learning process and monitor success independently from a teacher. The technical possibilities offer better access to learning contents, precise and more individualized feedback, and learning phases adapted precisely to the needs of the learner in terms of scope and pace. In this study, we investigate an important aspect of the digitization of teaching/learning processes using the example of laboratory scripts for chemistry students at university. The focus is on looking up terms and concepts in preparation for the lab internships, firstly in a paper-based glossary and secondly in a digital glossary. During a two-day study, a total of 16 students prepared for experiments on two topics with completely identical materials. We then studied the influence of content knowledge, motivation, and cognitive load. While all students show significant learning achievements, there are no significant differences between the groups. Furthermore, results show that pure digitization of information has no effect, despite the theoretically assumed advantages.

During the pandemic caused by SARS-CoV-2 (COVID-19), a paper analytical device (PAD) was proposed as a tool for remote laboratory classes for undergraduate chemistry to teach calibration curve concepts. For this experiment, students were taught how to prepare a PAD, calibrate standard solutions, construct a calibration curve, and treat data obtained by colorimetry digital image, by applying household utensils only. The proposed experiment was evaluated considering remote and in-person courses. More than 80% of the students in both groups reached grades greater than 60%. The students' survey demonstrated that 80 to 100% of the students (n = 6) agreed or strongly agreed that the experiment achieved the learning outcomes concerning the calibration curve. For 50% of the group, it was also found that colorimetric reactions could be more effective than the simple dye impregnation method.

Hands-on experiences in analytical chemistry laboratories are essential to improve students' technical skills on handling analytical glassware and instruments, but the coronavirus pandemic in 2020-2021 disrupted such learning activities. Thus, alternative remote activities are required to supplement practical skills. In this work, a new portable experiment to determine the concentration of Fe(III) by digital image colorimetry with curcumin paper is described. This experiment utilized complexation between Fe(III) and curcumin on a paper substrate, which changed from yellow to red-orange. Then, the RGB intensity changes, obtained using smartphones/devices, were plotted against the Fe(III) standard concentration to construct an external standard calibration curve for determining Fe(III) in unknown solutions. Using students' own smartphone/device enhanced their interest, and the portable small-scale experiment kit enabled a remote hands-on experience at their residence (Lab@Home). The experiment had been implemented both in Lab@Home and in-person formats for three semesters with 591 second-year students majoring in chemistry and other sciences, showing a satisfactory self-evaluated outcome (4.27 from 5) and post-test score (81.5%). The proposed experiment is a showcase to introduce modern analytical chemistry through smartphone/device and digital image colorimetry, while enhancing students' skills and interests in analytical chemistry laboratory.

We describe an iodometric titration method for the determination of ascorbic acid using a microfluidic paper-based analytical device([mu]PAD). The ascorbic acid was detected by measuring the length of the blue band formed in a straight paper channel delimited by wax. This analytical method was designed as a laboratory experiment for under graduates majoring in chemical education. The main objectives of this practice are to introduce [mu]PAD into a preservice teacher's classroom, motivating their passion of learning chemistry, and implementing green chemistry education. Finally, we hope this novel microscale chemistry experiment could be introduced into the chemistry classroom at high schools by these preservice teachers after graduation. A total of 145 preservice chemistry teachers performed this experiment in the fifth semester. They completed this experiment within 3 h; positive feedback from these students indicated that the learning objectives and instructional aims were met.

Science subjects at pre-tertiary and tertiary education levels are important for socio-economic and industrial development of any country; however, they are difficult for students to construct their concepts. In Tanzania, insufficient or lack of practical experiments are major challenges for science subjects due to insufficient or lack of laboratories, apparatus, expertise or reagents. Thus, this research assesses the effectiveness of paper-based against virtual laboratory experiences towards improvement of real (hands-on) chemistry practical in Tanzanian secondary schools focusing in Dodoma region. Chemistry virtual laboratory was developed and being deployed at Dodoma Secondary School for students who were never done practical sessions before to avoid biasness towards the study. The students were divided into three groups, namely paper-based and real laboratory as control groups (CG) and virtual laboratory as the experiment group (EG). Each group was further divided into two groups for the rest approaches forming six (6) groups. For EG, students were taught based on instructional approach which was enriched by computer animations in the computer laboratory. Results indicate that students who firstly attended virtual laboratory performed better in real laboratory than those who firstly attended real laboratory. Furthermore, the best progressive learning and performance for real experiments appears when the virtual laboratory preceded paper-based practical experiments. Thus, virtual laboratory is a very useful tool for learning chemistry practical not only to schools without laboratories but also to those with laboratories; and it should be considered by all the pre-tertiary schools in Tanzania and other schools in similar situations.

Although chemistry-focused socio-scientific issues support the 'relevance' model of chemistry education, the related literature has lacked any systematic review handling them together. For this reason, this research aimed to thematically synthesize the research papers on chemistry-focused socio scientific issues (SSI) from 2008 to 2020 and inferentially evaluate them in terms of the relevance model of chemistry education. After searching international and national well-known databases through relevant keyword patterns (e.g., Pattern 1: socio-scientific issues and chemistry education), 65 research papers were apparent for the systematic review. Then, the authors generated primary and secondary codes for the research papers and then inferentially marked their 'relevance' components. The systematic review indicated variation of research areas (e.g., relevance model of chemistry education) and dominant research foci for different themes (e.g., competencies and related variables for the theme 'aims'; pollution, energy, industry and fabrication-based problems for the theme 'SSI'; organic compounds for the theme 'chemistry concepts'). Further, it revealed that the research papers on chemistry-focused SSI had some shortcomings at handling all components of the relevance model in a balanced way. The current research suggests professionally training teachers about how to integrate chemistry-focused SSI and the relevance model into school chemistry.

Gender inequality is strongly linked with poor performance in science and mathematics for female students in secondary schools owing to socio-economic and cultural issues as well as learning strategies. According to the Certificate of Secondary Education Examination results of 2021 in Tanzania, the failure rate for female students was higher than that for male students, and such failure in chemistry was associated with inadequate knowledge about the tested concepts, failure to identify the requirements of the respective questions and lack of adequate mathematical skills. Real practical sessions are integral parts of chemistry to enhance the learning environments for both female and male students. However, the real laboratory practices especially for chemistry are challenged with the costs of the construction of physical laboratory infrastructure and reagents, and the time-consuming and physical demands on personnel during real practical sessions. Thus, this study explores gender-based effects of the chemistry virtual laboratory against a paper-based approach towards a real chemistry practical in Tanzanian secondary schools. The results indicate that the combined exposures of virtual laboratory and paper-based practicals improve real practical performance for both female and male students. Moreover, the performance of real practical practices progressively improved for female students when they were first exposed to the virtual laboratory and then the paper-based practical. Such improvements can be associated with the virtual laboratory providing interactive learning environments which support female students to connect and engage.

The lack of time available for staying up to date with the literature is a common issue for scholars and practitioners in many disciplines. A recent challenge issued on Twitter with the goal to read 100 papers in 100 days attracted the attention of several members of the chemistry education research community. In this paper, we report the outcomes of this reading challenge, including insights into the group composition, its reading preferences, and challenges participants face. We also provide an overview of the themes covered in the group's readings obtained via natural language processing of the abstracts of the papers read by the group. Common themes in the papers were generally centered around students, learning, and chemistry, with an emphasis on research validity and the role of technology in chemistry instruction. Differences between individual participants' reading choices and those of the group as a whole are visualized using semantic network plots.

We introduced a microfluidic paper-based analytical device ([mu]PAD) to undergraduates majoring in nutrition education using a modified acid-base titration on paper microzones. After designing experiments for sample analysis using micro acid-base titration, students fabricated the devices and implement the experiment as designed. Then they designed and implemented a classical titration method to evaluate the analytical results obtained by micro acid-base titration. Finally, the students completed an instructional design for teaching at secondary or higher vocational colleges. This comprehensive experiment aims to expose students to [mu]PADs, ignite their passion in learning courses related to food analysis or chemistry, train their capabilities in designing an experiment, improve skills in instructional design, and facilitate education of [mu]PADs in secondary or higher vocational colleges. Fifty-three students majoring in nutrition education participated in this comprehensive experiment and completed instructional designs within 2 weeks (14 h) in the fifth semester. Positive feedback from students indicated that the learning objectives of this comprehensive experiment were met.

The process of method development is at the heart of analytical chemistry, yet direct experimental experience with the process is rarely taught in the undergraduate laboratory. We report here an experiment that uses rapid, safe, and inexpensive paper-based microfluidics with cell phone detection in order to facilitate the development of a colorimetric method for the determination of iron with three different derivatizing agents (thiocyanate, 1,10 phenanthroline, or FerroZine). This lab has been developed with an inquiry-based pedagogy where students determine which figures of merit to measure, the order to measure them in, and their own procedures for measuring them. This experiment gives students the opportunity to measure linear range, sensitivity, selectivity, accuracy, precision, limit of detection, and optimal reaction time for each derivatizing agent. Students then compare and contrast the measured figures of merit to make an evaluation of which method is preferred for iron quantitation. The results are variable enough from group to group, and each derivatizing agent has different advantages and disadvantages so that there is no "right" answer. This experiment is very flexible and can be modified to fit into one or two lab periods, be delivered with students working in groups or individually, and be delivered in person or in a remote setting. Student learning was assessed using the Enhancing Learning by Improving Process Skills in STEM (ELIPSS) rubrics for management, critical thinking, and information processing. Students demonstrated growth in many skills and expressed significant appreciation for their own learning.

Due to the production of huge quantity of potentially toxic and recalcitrant pollutants, which cannot be completely decomposed with conventional biological wastewater treatment processes, in the paper industry, reliable treatment processes are highly required. This study conducted effective experiments of different series of processes to decompose persistent contaminants in the paper wastewater under controlled conditions of the used processes to meet the effluent quality standards of Korea Ministry of Environment in terms of CODMn (< 130 mg/L). For Biological treatment, Fenton, and photo-Fenton processes, various operational parameters were adjusted to determine the optimal conditions for CODMn value. Due to large quantity of refractory contaminants in the wastewater, single treatment process was not enough to meet the requirement of CODMn. Herein, we achieved the goal with two approaches: (1) secondary Fenton oxidation after biological and primary Fenton treatments, and (2) photo-Fenton treatment after biological treatment alone. The secondary Fenton oxidation process is an additional process operated under the same condition of the primary Fenton treatment to treat the effluent from the primary Fenton treatment. Ultimately, the residual CODMn concentrations of the secondary Fenton and single photo-Fenton treatment were 62.7 and 85.3 mg/L, respectively. However, the secondary Fenton required larger amounts of reagents and produced significant amounts of sludge, which require post-treatment, compared to single photo-Fenton treatment. Therefore, it suggests that the application of photo-Fenton was more efficient than the secondary Fenton in terms of economic feasibility and post-treatment requirement.

The chirality of chemicals is a well-known concept among undergraduates. The examples of chiral molecules in daily life are introduced to high school students as well. However, the chirality of single-walled carbon nanotubes (SWCNTs) remains unpopular in these groups. In this paper, a simple visualization of SWCNTs was first performed via paper origami. Then, a cost-effective separation experiment was introduced to the students to achieve the actual chiral SWCNTs. The proposed visualization and separation of chiral SWCNTs were evaluated in students' science projects. Introducing the chirality concept to students would enhance the students' understanding of nanomaterials and the chirality of SWCNTs.

This study presents an innovative lateral flow microfluidic paper-based analytical device (μPAD) designed for conducting quantitative paper-based enzyme-linked immunosorbent assays (p-ELISA), seamlessly executing conventional ELISA steps in a paper-based format. The p-ELISA device utilizes a passive fluidic circuit with functional elements such as a multi-bi-material cantilever (B-MaC) assembly, delay channels, and a buffer zone, all enclosed within housing for autonomous, sequential loading of critical reagents onto the detection zone. This novel approach not only demonstrates a rapid assay completion time of under 30 min, but also boasts reduced reagent requirements, minimal equipment needs, and broad applicability across clinical diagnostics and environmental surveillance. Through detailed descriptions of the design, materials, and fabrication methods for the multi-directional flow assay (MDFA), this manuscript highlights the device’s potential for complex biochemical analyses in a user-friendly and versatile format. Analytical performance evaluation, including a limit of detection (LOD) of 8.4 pM for Rabbit IgG, benchmarks the device’s efficacy compared to existing p-ELISA methodologies. This pioneering work lays the groundwork for future advancements in autonomous diagnostics, aiming to enhance global health outcomes through accessible and reliable testing solutions.

This essay charts the way that ideas of nature, life and disease generated new approaches to Europe's documentary culture between roughly 1650 and 1950. Training its focus on the medium of paper, specifically the essay, reveals conceptual intersections between caretakers of libraries and archives and naturalists or physicians whose focus was the entomology or bacteriology. The recognition of the fundamentally organic nature of books (animal, vegetable, mineral, in a Linnaean sense) invited fresh vocabularies and practices of care and preservation. The essay first explores how book lovers—often encouraged by learned societies or state agencies in the eighteenth century—campaigned against insects whose habitat lay between the covers of precious tomes. It then traces how nineteenth-century microscopy and bacteriology informed notions of sickness or 'pathology' in books. It ends by describing the efforts to remediate these impairments in the twentieth century: to deploy chemistry and medicine as therapies for bringing imperilled papers back to health. [ABSTRACT FROM AUTHOR]

An inexpensive at-home quantitative analysis activity was developed for the determination of glucose in unknown samples using paper-based microfluidic devices. All of the materials and reagents for the activity fit in a small kit that was mailed to students. The only items students needed to supply were water and a smartphone. Microgram quantities of glucose were dried down in microcentrifuge tubes and included in the kit so that students could prepare external standards. Student results distinguished between two different concentrations of glucose that served as unknown samples. The combination of paper-based devices and dried-down microgram quantities of reagents provides a foundation for the development of other at-home or in-person experiments.

Fiber-reinforced polymer composites (FRPCs) present a promising solution for diverting waste generated by the pulp and paper industry from landfills. The global pulp and paper industry generated 110 million tons [...]

We describe a paper-based microfluidic device for iron(III) assay in an applied instrumental analysis laboratory. Simple and convenient devices were fabricated by the students using patterning of filter paper to investigate three different procedures: drawing a boundary with eyeliner or wax pen; drawing a boundary with waterproof permanent marker pen; or drawing no boundary. These test papers were used for the analysis of iron(III) in water samples by smartphone-based colorimetric detection with thiocyanate. Additionally, the interference effect of other metal cations was done to further demonstrate practical utility. The results for field sample detection using this microdevice were satisfactory and show promise for use in other applications.

Paper and board are widely used as food contact materials. For such sensitive applications, consumer safety regarding the transfer of chemical components and contaminants to the food needs to be established. Such safety assessments are becoming increasingly challenging not only due to intentionally added substances but also non-intentionally added substances. In the European Union, compliance testing and safety evaluation of paper in food contact are largely based on national legislation and standards. The underlying tests are conventional methods, often overestimating and sometimes underestimating the migration into food. In this article, the relevant standard test methods are contrasted with currently available scientific knowledge. The scientific approaches to develop and identify suitable test methods are critically reviewed. Furthermore, theoretical predictions via mathematical modeling, with the aim to realistically simulate transfer to food, are presented and discussed in comparison with available migration studies with foods. Objectives are to (i) summarize the actual scientific knowledge in the field and draw conclusions regarding the potential and limitations of the existing test methods and (ii) identify research gaps toward a better qualitative and quantitative understanding of transport processes of volatile and non-volatile substances from paper and board into foods.

Pulp and paper manufacturing ranks as one of the most water and energy-intensive sectors globally, invariably leading to significant environmental pollution e.g. issues related to air pollution and waste disposal. Also, as global competition intensifies, prices of forest products are expected to keep decreasing. To ensure their viability, traditional producers must augment their revenue streams by diversifying into the production of bioenergy and biomaterials, alongside traditional wood, pulp, and paper products. A feasible solution is the integrated products biorefineries which provide a distinctive chance to pulp and paper industry to enhance revenues as well as reduce their environmental impact. Since pulp and paper stands as the predominant industry in Sweden, this review article explores the emerging biorefinery process options and main technological pathways being developed within Swedish pulp and paper mills. It also delves into the significant challenges that are being encountered in this evolving landscape and what possibilities lie ahead for responsible and sustainable pulp and paper operations.

The fraudulent practice of adding ammonium salts to milk in order to enhance the nitrogen content has serious health implications including renal failure. Ammonium ion detection has been targeted through the conventional analytical methods however, lack of portability and complex operation limits their use for field applications. In this scenario, paper-based test strips and electrochemical sensors can provide strategies for point-of-test applications. Here, an ion-selective paper-based chromogenic strip and an electrochemical sensor has been developed for detection and quantification of ammonium ions. The developed paper-based chromogenic strip showed detection limit of 0.008 % (w/v) for ammonium ions, whereas, electrochemical sensor showed an LOD of 0.0062 ± 0.0023 % (w/v) with a sensitivity of 1.6 × 10−5 A.% −1.mm−2. The developed paper-based chromogenic strip and electrochemical sensor can be employed by regulatory bodies and dairy industries to ensure the safety and quality of milk.

A unique triboelectric nanogenerator (TENG) using carbon nanotube (CNT) composite papers is proposed in this work. CNT composite papers can be fabricated easily using a method based on the production of Japanese washi paper. To obtain and evaluate the proposed TENGs, several types of CNT composite papers and aluminum plates were prepared. As the CNT composite paper contained many paper fibers, it was expected to be negatively charged, and the aluminum plate was expected to be positively charged across the triboelectric series. Through various experiments, it was confirmed that CNT composite papers could be used as TENGs. In addition, it was found that when a CNT composite paper was used, it contributed to triboelectricity generation, and the contained CNTs efficiently transferred the generated charge to the electrodes. Furthermore, output voltages approaching a maximum RMS value of 300 mV could be obtained. The results of this study will aid in the practical application of paper-based TENGs in the near future.

The use of synthetic chemicals in acid‒base testing has raised concerns about their environmental impact. The use of natural materials to produce natural indicator paper is an attempt to reduce the negative impact on the environment. Binahong (Anredera cordifolia) seeds can replace conventional chemical synthetic materials. This study aims to develop Binahong seed indicator paper as an alternative environmentally friendly material for acid‒base testing. The method used in this research is experimental and involves the extraction of Binahong seeds, making indicator paper with a certain formulation, and testing the performance of the indicator paper using standard acid and base solutions. Data collection was performed via the observation and measurement of certain parameters. The test results of the Binahong natural indicator paper revealed a significant color change when 95% ethanol was used, which produces a red or purple color at pH 1‒7, a blue color at pH 8‒10 and a yellow color at pH 11‒14. Binahong seeds have potential as an environmentally friendly alternative in acid‒base testing because they respond well to variations in the acidity and basicity of the solution.

The majority of chemical experiments conducted during educational programs are carried out in laboratories because they require instructors with special skills, in addition to large, expensive instruments. Recently, there has been an increasing demand for chemical experiments that can be carried out anywhere. Herein, we propose a novel type of paper-based analytical device (PAD) for enabling quantitative analysis without the requirement for a micropipette, since the PAD features a large sample loading zone and a waste zone, enabling accurate volume control of a liquid sample. We initially employed a micropipette to evaluate the PAD and demonstrate the quantitative analysis of ascorbic acid (AA) and pH using different loading volumes. Finally, we determined the AA concentrations and pH values of commercially available beverages using disposable plastic droppers, and the obtained results were in good agreement with those obtained through conventional methods. This PAD format can therefore be used as a novel educational tool for conducting certain chemical analyses in remote learning environments.

This study investigates the impact of zirconium-based KZC series crosslinkers with varying zirconium contents and the polyamine-based crosslinker (PBC) on the properties of coated paper, focusing on key performance metrics such as viscosity, wet rub and pick resistance, dry pick resistance, gloss, brightness, ink set-off, and print mottle. The findings reveal that crosslinkers’ type and concentration significantly influence the coating colors’ viscosity, with PBC demonstrating lower low shear viscosity at lower concentrations. The KZC series showed stable viscosity across a zirconium content range of 7% to 20%, and both crosslinker types enhanced wet rub resistance at higher concentrations. Notably, the KZC series, particularly KZC7, exhibited superior wet pick resistance at increased concentrations, highlighting its effectiveness in enhancing the durability of the coating layer. All crosslinkers maintained excellent dry pick resistance, ensuring robust coating performance. While gloss and brightness were generally unaffected, KZC20, which had the highest zirconium content, slightly reduced these optical properties. Ink set-off tests indicated that the KZC series performed better at lower concentrations, whereas higher concentrations led to increased ink set-off, potentially due to over-crosslinking. Print mottle remained consistent across all crosslinkers, indicating uniform coating quality. Overall, the zirconium-based KZC series significantly enhances wet resistance and maintains high performance across various properties, though it may slightly reduce gloss and brightness and increase ink set-off at higher concentrations. PBC offers a balanced performance profile, emphasizing the need for careful crosslinker type and concentration optimization to achieve the desired coating properties for specific applications. This comprehensive evaluation provides valuable insights for developing and optimizing high-performance coated papers.

The Making Introductory Courses Real while Online (MICRO) laboratory project was developed to meet the need for hands-on experiments, focused on topics in analytical chemistry, to be delivered safely remotely or in a socially distanced in-person lab. Unlike more traditional lab experiments, MICRO laboratories use only microgram or nanogram amounts of chemicals; paper microfluidic technology is used to store and mix reactants. Instructional materials use an inquiry-based approach and are situated in a context that highlights the human impacts of the scientific analysis. To support broader-scale implementation of the experiments and promote a shift to more inquiry-based laboratory instruction, an array of supports were developed, including adaptable instructional materials, instructional videos for lab preparation, resource guides, and an introductory workshop. A cohort of nine institutions implemented MICRO laboratories both remotely and in person during Fall 2020. Students were able to successfully complete the experiments, and the inquiry nature of the laboratories led to an increased comfort with the trial-and-error nature of authentic scientific practice. Additionally, most faculty participants indicated a commitment to an increased degree of inquiry in their laboratory pedagogy.

This work presents a dynamic modeling approach for analyzing the behavior of a bi-material cantilever actuator structure, consisting of a strip of filter paper bonded to a strip of tape. The actuator’s response is induced by a mismatch strain generated upon wetting, leading to the bending of the cantilever. The study delves into a comprehensive exploration of the dynamic deflection characteristics of the bilayer structure. It untangles the intricate connections among the saturation, modulus, hygro-expansion strain, and deflection, while uniquely addressing the challenges stemming from fluid–structure coupling. To solve the coupled fluid–solid differential equations, a combined numerical method is employed. This involves the application of the Highly Simplified Marker and Cell (HSMAC) technique for fluid flow analysis and the Finite Difference Method (FDM) for response deflection computation. In terms of the capillary flow model, the Computational Fluid Dynamics (CFD) simulations closely align with the classical Washburn relationship, depicting the wetted front’s evolution over time. Furthermore, the numerical findings demonstrate that heightened saturation levels trigger an increase in hygro-expansion strain, consequently leading to a rapid rise in response deflection until a static equilibrium is achieved. This phenomenon underscores the pivotal interplay among saturation, hygro-expansion strain, and deflection within the system. Additionally, the actuator’s response sensitivity to material characteristics is highlighted. As the mismatch strain evolving from paper hygro-expansion diminishes, a corresponding reduction in the axial strain causes a decrease in response deflection. The dynamic parameter demonstrates that the deflection response of the bilayer actuator diminishes as dynamic pressure decreases, reaching a minimal level beyond which further changes are negligible. This intricate correlation underscores the device’s responsiveness to specific material traits, offering prospects for precise behavior tuning. The dependence of paper modulus on saturation levels is revealed to significantly influence bilayer actuator deflection. With higher saturation content, the modulus decreases, resulting in amplified deflection. Finally, strong concordance is observed among the present fluidically coupled model, the static model, and empirical data—a testament to the accuracy of the numerical formulation and results presented in this study.

The sustainable use of natural resources is becoming an increasingly important issue today. Stone paper, produced as an alternative to cellulose-based paper from the forest, is rich in minerals and produced without cellulose and water. This study focuses on the behavior of screen-printing ink on two different papers, stone paper and coated sticker paper. Properties such as ink adhesion, rubbing resistance, optical printing ink density, ink consumption, and lightfastness were measured on these surfaces. Solvent- and UV-based inks were used, and printing was carried out on cellulose-based (coated sticker paper) and mineral-based (stone paper) paper layers using three different mesh counts (90, 120, and 140 tpc). The rubbing resistance and lightfastness of the papers were also measured. The present findings revealed that stone paper had the same printability properties as cellulose-based paper. The study concluded that using a 140 tpc mesh with both types of ink results in a high-lightfastness ink layer and lower ink consumption. UV-based inks exhibited high rub resistance across all mesh counts. Additionally, when printing with stone paper, there will be a reduction in ink consumption, thereby achieving cost savings. Based on the present findings, it was concluded that water- and oil-resistant stone paper can be considered an essential alternative in many fields, including the printing industry.

A new method was proposed for point-of-care testing (POCT) of immunosuppressants in blood using thin-layer paper spray ionization and a miniature mass spectrometer. The aluminum thin-layer plate was used as paper spray substrate, and cut into an equilateral triangle. Aliquots of 10 μL blood sample were loaded on the aluminum thin-layer plate, and then 20 μL methanol was dropped as elution/spray solvent. The tip of the triangular plate was placed 1.0 cm in front of the discontinuous atmospheric pressure interface (DAPI) of the miniature mass spectrometer. When the spray voltage was applied, the sample was eluted from the triangular plate and formed paper spray ionization at the tip. Coupled with the miniature mass spectrometer, five immunosuppressants were detected under negative ion mode. The precursor ions ［M-H］- of tacrolimus, sirolimus, everolimus, ciclosporin A, and mycophenolic acid are m/z 802.6, 912.6, 957.1, 1 200.8, 319.1, and product ions are m/z 560.2 and 604.3, m/z 590.3 and 321.2, m/z 590.3 and 365.2, m/z 1 088.8, m/z 287.4 and 275.1, respectively. Based on the observed signal-to-noise ratio (S/N) of the most intense tandem mass spectrometry (MS/MS) fragment peaks and using the S/N=3 and 10 as the criteria, the limits of detection (LODs) and quantitation (LOQs) are estimated to be 0.5-5 mg/L and 1-10 mg/L, respectively. The internal standard method was used for quantitative analysis, and indapamide was used as the internal standard compound. Sufficient linearity for each analyte is obtained with the correlation coefficients (r) greater than 0.99. The proposed method displays good recoveries in the range of 91.0%-114.3% with the relative standard deviations (RSDs) less than 8.4%. Moreover, the developed method was used for the analysis of blood samples, which spiked with tacrolimus, sirolimus, everolimus, cyclosporine A and mycophenolic acid at the concentration of 100 mg/L. The analytical results demonstrated the consistency between the proposed method and the traditional liquid chromatography-mass spectrometry (LC-MS) method. The entire analysis procedure can be completed within 1 min. The proposed method is simple, fast, accurate, efficient, and suitable for POCT of immunosuppressants in blood.

This communication describes a method to detect aluminum in gastric drugs by the naked eye using a microfluidic paper-based analytical device ([mu]PAD). Aluminum ions react with chrome azurol S (CAS) and cetyltrimethylammonium bromide (CTAB) to form a colored complex, which generates a colored band on the [mu]PAD. A printed ruler can be used to measure the length of the colored band on an individual paper channel for the quantification of an aluminum ion. The [mu]PAD system was designed for use in a modern instrumental analysis course taken by students majoring in Food Quality and Safety. This analytical protocol could also be modified to be used as a demonstration or laboratory experiment in a high school chemistry course with some simplifications to the procedures.

Microfluidic paper-based analytical devices (µPADs) have been successfully developed using dual detection: electrochemical and colorimetric systems. The µPADs have the potential to be used as Pb(II), Cd(II), and Cu(II) sensors to test the quality of water. The fabrication process uses hot embossing and screen-printing methods. The working electrode in the electrochemical zone was enhanced by the bismuth metal deposition process, while in the colorimetric zone, the gold nanoparticles modified with thioctic acid and dansylhydrazine (TA-Au-DNS) were used as a colorimetric sensor to detect Cu. The basic material of µPADs was characterized using a Fourier-transform infrared (FTIR) and a contact angle meter (CAM). In the electrochemical zone, the signals of square wave anodic stripping voltammetry (SWASV) resulted in good detection of Pb(II) and Cd(II) (from 0 to 100 ppb) with a limit of detection of 1.588 and 1.42 ppb, respectively. In the colorimetric zone, the performance of TA-Au-DNS for detecting Cu metal was obtained from readings through the red-green-blue (RGB) sensor as a miniature of µPADs reader. The LOD, LOQ, and average Vx0 (linearity values) in the detection of Cu(II) (from 58 to 100 ppb) are 8.51 ppb, 28.36 ppb, and 0.41%, respectively.

This work reports the first use of rubber latex waste as the hydrophobic reagent for a low-cost, simple, and rapid fabrication of a paper towel-based experimental device (PTED) with a circular design of 5 mm to demonstrate the factors affecting chemical equilibrium; this serves as a user-friendly means for a laboratory experiment. The illustration of the factors affecting chemical equilibrium is implemented in the PTED. In this approach, the color change of a cobalt(II) complex reaction from pink to blue was observed by the naked eye on the PTED when a tiny drop of hydrochloric acid solution and the treatment of heat by using a hot air dryer (1200 W, 2 min) were applied to the PTED with the precoated cobalt solution (pink color), separately or together. The return of the color of the reactions from blue to pink was carried out by using a tiny drop of water and the treatment of cooling by using an ice bath for 10 min. In addition, the chemical equilibrium constant ("K"[subscript c]) can be easily quantified by processing digital images of the detection zones of PTED captured with a smartphone camera under a control light box at room temperature (˜25 °C), while image analysis was performed using ImageJ software. This PTED laboratory is a new approach not only to enhance students' learning of the factors affecting chemical equilibrium based on Le Châtelier's principle, but also to present potential applications of PTED into all levels of chemistry from middle school through college classes.

A two to three period analytical chemistry experiment has been developed which allows second year students to explore chemical color tests used to detect adulterated pharmaceuticals. Students prepare several paper analytical devices (PADs) to generate positive and negative controls antibiotics, along with cutting agents such as starch and chalk. These PADs are used to identify the active ingredients and excipients in mystery tablets prepared by their classmates. In the second part of the lab, the students select an individual color test and design an experiment to quantify their mystery pill's active pharmaceutical ingredient (API). Nearly all of the student groups were able to successfully identify adulterants present in their mystery tablets. The quantification of the mystery tablets was also successful with all but one group calculating the correct concentration within 6%. In a postlab assessment, the students identified their largest gains in their ability to analyze data and other information, skill in science writing, and learning of laboratory techniques.

Compared to traditional lithium metal batteries, anode-free lithium metal batteries use bare current collectors as an anode instead of Li metal, making them highly promising for mass production and achieving high-energy density. The current collector, as the sole component of the anode, is crucial in lithium deposition-stripping behavior and greatly impacts the rate of Li depletion from the cathode. In this study, to investigate the lithiophilicity effect of the current collector on the solid electrolyte interface (SEI) film construction and cycling performance of anode-free lithium batteries, various lightweight paper-based current collectors were prepared by electroless plating Cu and lipophilic Ag on low-dust paper (LDP). The areal densities of the as-prepared LDP@Cu, LDP@Cu-Ag, and LDP@Ag were approximately 0.33 mg cm−2. The use of lipophilic Ag-coated collectors with varying loadings allowed for the regulation of lipophilicity. The impacts of these collectors on the distribution of SEI components and Li depletion rate in common electrolytes were investigated. The findings suggest that higher loadings of lipophilic materials, such as Ag, on the current collector increase its lipophilicity but also lead to significant Li depletion during the cycling process in full-cell anode-free Li metal batteries. Thus, moderately lithiophilic current collectors, such as LDP@Cu-Ag, show more potential for Li deposition and striping and stable SEI with a low speed of Li depletion.

This study investigates the physical, mechanical, and structural characteristics of handmade paper samples derived from cellulose extracted from grass clippings using two distinct methods as follows: (1) alkali treatment and (2) alkali treatment followed by bleaching, coupled with the incorporation of barium sulfate as a mineral filler. Our investigation revealed that the handmade paper samples’ densities, moisture contents, and thicknesses varied within the ranges of 0.436 to 0.549 g/cm3, 5.60 to 2.51%, and 0.41 to 0.50 mm, respectively. The tensile strength and folding endurance of the papers produced through alkali treatment with barium sulfate were notably superior to those produced from bleached pulp and barium sulfate. Our analysis indicates that several critical factors, including paper density, thickness, the crystallinity index, and the microfibrillar structure of cellulose, intricately influence the mechanical and strength properties of the samples. Using Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) techniques, we identified characteristic cellulose bonds and examined cellulose’s crystalline and amorphous phases. Additionally, the crystallinity index of the samples was determined using both the Segal and peak deconvolution methods. Scanning electron microscopy (SEM) micrographs revealed interconnected networks of cellulose fibers with varying thicknesses and lengths, along with incorporated mineral filler within the cellulose fiber structure. Variations in mineral particle retention were attributed to the presence or absence of cellulose microfibrils. These findings contribute to our understanding of the observed strength characteristics of the paper samples and underscore the potential applications of cellulose derived from grass clippings, especially when combined with barium sulfate as a mineral filler in paper production.

The research results and evaluation of the applicability of the original composition of hybrid paper based on silver nanowires (AgNWs), cellulose pulp (CP), and carbon nanotubes (CNTs) are presented and discussed. The material tested was used to manufacture sensors for mechanical deformation resulting from external influences or related to human activity interactions. The sensors were fabricated using an AgNWs + CP suspension and additives by the vacuum filtration method. The substrate obtained was machined and then laminated with a layer of poly(dimethylsiloxane) (PDMS). The recorded responses to selected types of imposed mechanical interactions in the form of changes in the relative resistance of the sensor throughout the tests showed a close cause-and-effect relationship. The response of the tested systems when applying an alternating magnetic field was also observed. The results indicate that the proposed solutions can find application in the monitoring of mechanical interactions resulting from the dynamic behavior of physical objects, as well as derived from selected human vital functions.

The development of a simple yet greener microfluidic paper-based analytical device (μ-PAD) for on-site detection of Mn(II) in various types of waters using tannin as a natural reagent was described. The μ-PAD consists of twelve detection zones, created on a Whatman Number 1 filter paper by a simple drawing technique using an acrylic watercolor. The detection of Mn(II) was based on the color change on the reaction zone due to the reaction between Mn(II) and the pre-deposited tannin. The μ-PAD image was captured by a portable smartphone detector, and the blue intensity was digitized using a color picker application to generate the reflectance as the analytical response. The proposed method was characterized by a linear dynamic range of 0.05–0.25 mg L−1 with the limit of detection (LOD) for the determination of Mn(II) of 0.026 mg L−1. The other analytical merits of the proposed method, such as precision (RSD, 1.107%), accuracy (E, 6.697%), and recovery (104–112%), were all comparable to the existing spectrophotometric methods. The method’s successful application to natural water samples from manganese mining sites aligns with the reference spectrophotometric method, indicating its good selectivity and accuracy without significant influence of commonly associated interfering ions.

Carbon fiber paper is one of the most important substrates used in the gas diffusion layer of the polymer electrolyte membrane fuel cell. A novel approach to creating carbon fiber paper using polyacrylonitrile compounds was proposed in this study. The technique incorporated varying amounts of carbon materials, including carbon black (Vulcan), graphite powder, and carbon nanotubes. Polyacrylonitrile carbon materials were prepared through the spinning process, followed by oxidative stabilization under an oxygen atmosphere at a temperature range of 160–300 °C as the first step. The pliable material undergoes a conversion process to create a compound or ladder that is non-plastic, which is then stabilized in an N2 atmosphere. The fibers are then pre-carbonized at temperatures ranging from 300 to 600 °C and further carbonized between 600 and 1100 °C. After that, Teflon is added and the resulting fibers are made into sheets during the production process. Finally, physical measurements and electrochemical methods such as: checking the amount of water absorption, scanning electron microscope (SEM), chronopotentiometry, electrochemical impedance spectroscopy, electron resistance of carbon sheet, double layer capacitance, and surface roughness parameter were evaluated. The results indicate that the best performance is related to CP7 carbon paper (with a 30–70 % combination of polyacrylonitrile and carbon black).

We present a facile one-step hydrothermal method for the fabrication of free-standing graphene paper using aqueous graphene oxide (GO) dispersion as the starting material. Notably, the method does not require the use of any additives for the reduction and preparation of the graphene paper. The resulting graphene paper exhibits a high degree of reduction, as confirmed by X-ray photoelectron spectroscopy (XPS) analysis, revealing a carbon-to-oxygen (C/O) ratio of ∼7. The fabricated graphene paper also demonstrates excellent conductivity, with a measured value of ∼1900 S/m, and sheet resistance of around 100 Ω/sq. Furthermore, the energy storage capability of the graphene paper based electrode is evaluated, which shows a promising specific capacity of 249 F/g at a current density of 1 A/g in 1M H2SO4 as the ionic medium. Additionally, the electrode has also demonstrated remarkable energy density and power density values of 28.68 Wh/Kg and 455 W/Kg, respectively. Overall, the resulting graphene paper exhibits high conductivity and excellent electrochemical performance, making it a promising candidate for various energy storage applications.

The development of simple and accurate detection of uracil-DNA glycosylase (UDG) is of great significance for early clinical diagnosis and biomedical research. Here, we on the first effort introduced the uracil bases into the rolling circle amplification (RCA) reaction to produce the functionalized pure DNA hydrogel (PDH) for UDG detection. During RCA process, methylene blue (MB) molecules as the indicators were encapsulated into PDH. The addition of UDG can remove the uracil bases of PDH to generate abasic sites, which are further cleaved with the assistance of apurinic/apyrimidinic endonuclease (APE), thus resulting in the dissociation of PDH to release blue MB. By combining with the paper analytical devices as the signal readout platform, a colorimetric and electrochemical dual-signal biosensor was constructed for convenient and accurate detection of UDG. The proposed MB@PDH-based dual-signal sensing system exhibited good selectivity and high sensitivity with a detection limit of 6.4 × 10−4 U/mL (electrochemical method). It was also demonstrated that this sensing system showed excellent performance in UDG inhibitor screening, thus providing great potential in UDG-related disease diagnosis and drug discovery.