Search

The accuracy of a predictive system is critical for predictive maintenance and to support the right decisions at the right times. Statistical models, such as ARIMA and SARIMA, are unable to describe the stochastic nature of the data. Neural networks, such as long short-term memory (LSTM) and the gated recurrent unit (GRU), are good predictors for univariate and multivariate data. The present paper describes a case study where the performances of long short-term memory and gated recurrent units are compared, based on different hyperparameters. In general, gated recurrent units exhibit better performance, based on a case study on pulp paper presses. The final result demonstrates that, to maximize the equipment availability, gated recurrent units, as demonstrated in the paper, are the best options.

The clinical importance of blood group (BG) antigens is related to their ability to induce immune antibodies that can cause hemolysis. Yet, ABO and D (Rh) are still considered to be the key antigens for healthy blood transfusion and secondary antigens are the next priority. Serological typing is the most widely used typing method. Rapid and accurate blood grouping plays an important role in some clinical conditions, rather than conventional techniques. Hence, developing a simple and economical model for rapid blood grouping would facilitate these tests. In recent decades, paper-based microfluidics such as μPADs has gained much interest in wide application areas such as point-of-care diagnostic. In this study, we evaluated μPADs that are performed for blood grouping and its recent progress. A comprehensive literature search was performed using databases including PUBMED, SCOPUS, Web of Science and Google Scholar. Keywords were blood grouping or typing, paper analytical device, rapid test, etc. After investigation of search results, 16 papers from 2010 to 2020 were included. Further information in detail was classified in Table 1. Generally, two principles for blood typing μPADs are introduced. The lateral chromatographic flow method and the vertical flow-through method that detects BG in a visual-based manner. To detect results with acceptable clarity many factors and challenges like paper, blood sample, buffer, Ab and RBC interaction and also μPADs stability need to be considered, which are discussed. In conclusion, the simplicity, stability, cheapness, portability and biocompatibility of μPADs for blood grouping confirming its utility and also they have the capability to robust, universal blood-grouping platform. Table 1 Summary of blood grouping tests using paper-based analytical devices Antigens Type of diagnosis Validation method Sample No Accuracy Action time Paper type Stability Sample dilution Buffer Ref A, B, Rh Forward volunteers records 5 - - Whatman No. 4 - 1/2 PBS* (Khan et al. 2010) A, B, Rh Forward gel assay test and conventional slide test 100 100% 1 min Whatman No. 4 and Kleeenex paper towel 7 Days in 4 °C 1/1 NSS (Al-Tamimi et al. 2012) A, B, Rh Forward gel card assay 99 100% 20 Sec + Washing Kleeenex paper towel - 1/1 NSS (Li et al. 2012) A, B, Rh Forward - - - - Kleeenex paper towel - 45/100 PSS (Li et al. 2013) A, B, Rh Forward gel card assay 98 100% 1.5 min Kleeenex paper towel - 85/100 PBS (Guan et al. 2014b) C, E, c, e, K, Jka, Jkb, M, N, S, P1, and Lea Forward gel card assay 266 100% - Kleeenex paper towel - 1/1 NSS (Li et al. 2014b) A, B, Rh Forward and Reverse conventional slide test 96 ≈ 91% 10 min Whatman No. 1 21 Days in 4 °C 1/2 NSS (Noiphung et al. 2015) C, c, E, e, K, k, Fya, Fyb, Jka, Jkb, M, N, S and s, P1, Lea and Leb Forward - 478 - - Kleeenex paper towel - 1/1 NSS, PBS (Then et al. 2015) A, B Forward and Reverse conventional slide test 76 100% 5-8 min Whatman No. 4 38 Days in 4 °C 1/4, 1/1 NSS (Songjaroen and Laiwattanapaisal 2016) D, K Forward volunteers records 210 - 7.5 min Kleenex paper towel - 1/1 NSS (Yeow et al. 2016) A, B, c, e, D, C, E, M, N, S, s, P1, Jka, Jkb, Lea, Leb, Fya, and Fyb Forward and Reverse gel card assay 3550 ≈100% 30 s Fiber glass and cotton linter 180 Days in 25 °C 45/100, 1/1 PBS (Zhang et al. 2017) A, B Forward conventional slide test 598 100% 3 min Whatman No. 113 14 Day in 4 °C 1/1 NSS (Songjaroen et al. 2018) A, B, Rh Forward conventional slide test - - 30 Sec + Washing Unrefined sisal paper - 1/2 NSS (Casals-Terré et al. 2019) A, B, Rh Forward - - - - Whatman No.1 - 1/1 NSS (Ansari et al. 2020) ABORh Forward and Reverse conventional slide test - 100% Unrefined Eucalyptus papers - 1/2 NSS, PBS (Casals-Terré et al. 2020) A, B, Rh Forward - - - 30 Sec + Washing Whatman No. 4 modified with chitosan ≥ 100 days in 25 °C 1/1 NSS (Parween et al. 2020)

Paper spray ionization has been used as a fast sampling/ionization method for the direct mass spectrometric analysis of biological samples at ambient conditions. Here, we demonstrated that by utilizing paper spray ionization-mass spectrometry (PSI-MS) coupled with field asymmetric waveform ion mobility spectrometry (FAIMS), predictive metabolic and lipidomic profiles of routine breast core needle biopsies could be obtained effectively. By the combination of machine learning algorithms and pathological examination reports, we developed a classification model, which has an overall accuracy of 87.5% for an instantaneous differentiation between cancerous and noncancerous breast tissues utilizing metabolic and lipidomic profiles. Our results suggested that paper spray ionization-ion mobility spectrometry-mass spectrometry (PSI-IMS-MS) is a powerful approach for rapid breast cancer diagnosis based on altered metabolic and lipidomic profiles.

Due to the increasing use of the Internet and other online resources, there is tremendous growth in the data of text documents. It is not possible to manage this huge data manually. This has led to the growth of fields like text mining and text summarization. This paper presents a title prediction model for research papers using Recursive Recurrent Neural Network (Recursive RNN) and evaluates its performance by comparing it with sequence-to-sequence models. Research papers published between 2018 and 2020 were obtained from a standard repository, viz. Kaggle, to train the title prediction model. The performance of different versions of Recursive RNN and Seq2Seq was evaluated in terms of training and hold-out loss. The experimental results show that Recursive RNN models perform significantly better than the other models.

International audience; This paper focuses on the problem of the hierarchical multi‐label classification of research papers, which is the task of assigning the set of relevant labels for a paper from a hierarchy, using reduced amounts of labelled training data. Specifically, we study leveraging unlabelled data, which are usually plentiful and easy to collect, in addition to the few available labelled ones in a semi‐supervised learning framework for achieving better performance results. Thus, in this paper, we propose a semi‐supervised approach for the hierarchical multi‐label classification task of research papers based on the well‐known Co‐training algorithm, which exploit content and bibliographic coupling information as two distinct papers' views. In our approach, two hierarchical multi‐label classifiers, are learnt on different views of the labelled data, and iteratively select their most confident unlabelled samples, which are further added to the labelled set. The success of our suggested Co‐training‐based approach lies in two main components. The first is the use of two suggested selection criteria (i.e., Maximum Agreement and Labels Cardinality Consistency) that enforce selecting confident unlabelled samples. The second is the appliance of an oversampling method that rebalances the labels distribution of the initial labelled set, which reduces the reinforcement of the label imbalance issue during the Co‐training learning. The proposed approach is evaluated using a collection of scientific papers extracted from the ACM digital library. Performed experiments show the effectiveness of our approach with regards to several baseline methods.

In daily clinical practice, clinicians integrate available data to ascertain the diagnostic and prognostic probability of a disease or clinical outcome for their patients. For patients with suspected or known cardiovascular disease, several anatomical and functional imaging techniques are commonly performed to aid this endeavor, including coronary computed tomography angiography (CCTA) and nuclear cardiology imaging. Continuous improvement in positron emission tomography (PET), single-photon emission computed tomography (SPECT), and CT hardware and software has resulted in improved diagnostic performance and wide implementation of these imaging techniques in daily clinical practice. However, the human ability to interpret, quantify, and integrate these data sets is limited. The identification of novel markers and application of machine learning (ML) algorithms, including deep learning (DL) to cardiovascular imaging techniques will further improve diagnosis and prognostication for patients with cardiovascular diseases. The goal of this position paper of the European Association of Nuclear Medicine (EANM) and the European Association of Cardiovascular Imaging (EACVI) is to provide an overview of the general concepts behind modern machine learning-based artificial intelligence, highlights currently prefered methods, practices, and computational models, and proposes new strategies to support the clinical application of ML in the field of cardiovascular imaging using nuclear cardiology (hybrid) and CT techniques.

Thermal papers, commonly used for printed receipts or lottery tickets, are omnipresent in our everyday life. They are regarded as semi-porous substrates, and yet can be critical to analyze when looking for latent fingermarks due to their thermosensibility. The aim of this study was to investigate a development sequence that would better combine the adequate detection techniques in order to maximize the chances to develop latent fingermarks left on these substrates. Different methods of development have been compared on test substrates: black magnetic powder, Lumicyano™, thermal development, ninhydrin and 1,2-indanedione/ZnCl2. Whitening stages and thermal development have been focused on, tested and optimized. The results of these preliminary tests enabled the study of three development sequences. They have subsequently been compared to the one currently used in the Gendarmerie's laboratories and the best results have been provided during pseudo-operational comparative trials by one of these sequences, consisting in 6 stages.

In this paper, we analyze the intelligent subdesign of the simulated marking system through an in-depth study of it. This paper proposes a correlation analysis-based quantification of N-element sense values and a rationality enhancement-based scoring fitting algorithm for English essays. This paper also extracts word features, sentence features, and chapter structure features in essays to fit English composition scores. Since not all students can complete the essays according to the topic requirements, a triage scoring model is used to separate the normal essays from the low-scoring essays. Statistically, it was found that the essay scores also showed a certain normal distribution. The standard support vector regression algorithm is prone to data skewing problems, so this paper addresses this problem by using a rationality enhancement method that gives a corresponding penalty factor according to the distribution of the dataset. The results show that the English essay scoring fitting algorithm proposed in this paper can well improve the prediction accuracy of some data and solve the problem of skewed data where the scores show a normal distribution. This paper designs and implements an online mock examination system that incorporates an intelligent scoring system for essays, enabling it to meet the needs of teachers and students for online examinations and intelligent scoring.

The application of big data, radiomics, machine learning, and artificial intelligence (AI) algorithms in radiology requires access to large data sets containing personal health information. Because machine learning projects often require collaboration between different sites or data transfer to a third party, precautions are required to safeguard patient privacy. Safety measures are required to prevent inadvertent access to and transfer of identifiable information. The Canadian Association of Radiologists (CAR) is the national voice of radiology committed to promoting the highest standards in patient-centered imaging, lifelong learning, and research. The CAR has created an AI Ethical and Legal standing committee with the mandate to guide the medical imaging community in terms of best practices in data management, access to health care data, de-identification, and accountability practices. Part 2 of this article will inform CAR members on the practical aspects of medical imaging de-identification, strengths and limitations of de-identification approaches, list of de-identification software and tools available, and perspectives on future directions.

With the acceleration of education informatization, the social demand for online examination papers is increasing. However, there are some problems in the generation of online examination papers. Firstly, it is impossible to randomly generate examination papers quickly. Besides, it is impossible to dynamically adjust examination papers according to test results. Thirdly, it is impossible to generate examination papers based on individual characteristics of students. In order to solve these problems, this paper proposes a new auto-generation examination paper model based on genetic algorithm. The model dynamically adjusts the difficulty factor of individual test questions by analyzing the online learning data and historical user test result data, and then guarantees the difficulty of generating examination papers in line with the changes in the current educational environment. The simulation results show that the algorithm improves the efficiency and accuracy of the generation examination paper, and effectively controls the difficulty coefficient of the examination paper.

We present a deep learning-based framework to design and quantify point-of-care sensors. As its proof-of-concept and use-case, we demonstrated a low-cost and rapid paper-based vertical flow assay (VFA) for high sensitivity C-Reactive Protein (hsCRP) testing, a common medical test used for quantifying the degree of inflammation in patients at risk of cardio-vascular disease (CVD). A machine learning-based sensor design framework was developed for two key tasks: (1) to determine an optimal configuration of immunoreaction spots and conditions, spatially-multiplexed on a paper-based sensing membrane, and (2) to accurately infer the target analyte concentration based on the signals of the optimal VFA configuration. Using a custom-designed mobile-phone based VFA reader, a clinical study was performed with 85 human serum samples to characterize the quantification accuracy around the clinically defined cutoffs for CVD risk stratification. Results from blindly-tested VFAs indicate a competitive coefficient of variation of 11.2% with a linearity of R2 = 0.95; in addition to the success in the high-sensitivity CRP range (i.e., 0-10 mg/L), our results further demonstrate a mitigation of the hook-effect at higher CRP concentrations due to the incorporation of antigen capture spots within the multiplexed sensing membrane of the VFA. This paper-based computational VFA that is powered by deep learning could expand access to CVD health screening, and the presented machine learning-enabled sensing framework can be broadly used to design cost-effective and mobile sensors for various point-of-care diagnostics applications.

The purpose of this work is to explore the applicability and effectiveness of deep learning methods for the task------moves recognition in abstract of research paper. We firstly build a large corpus for moves recognition. Then we choose the traditional machine learning method SVM as a benchmark, and develop four moves recognition methods based on DNN, LSTM, Attention-BiLSTM and BERT. Finally, we design two groups of experiments with sample size 10,000 and 50,000 and then compare experimental results. The results show that most of the deep learning methods outperform the traditional machine learning method SVM especially in large-scale sample experiments, in which the BERT with a re-pre-trained model achieves the best results in both groups of experiments. Deep learning methods are proved applicable and effective for moves recognition in research paper abstracts.

Machine learning (ML) has increasingly been adopted in safety-critical systems such as autonomous vehicles (AVs) and industrial robotics. In these domains, reliability and safety are important considerations, and hence it is critical to ensure the resilience of ML systems to faults and errors. On the other hand, soft errors are becoming more frequent in commodity computer systems due to the effects of technology scaling and reduced supply voltages. Further, traditional solutions for masking hardware faults such as Triple-Modular Redundancy (TMR) are prohibitively expensive in terms of their energy and performance overheads. Therefore, there is a compelling need to ensure the resilience of ML applications to soft errors on commodity hardware platforms.We first experimentally assess the resilience of safety-critical ML applications to soft errors. We demonstrate through fault injection experiments that even a single bit flip due to a soft error can lead to misclassification in Deep Neural Network (DNN) applications deployed in AVs, leading to safety violations. However, not all the errors in an DNN will result in serve consequences such as safety violations, and hence it is sufficient to protect the DNN from the ones that do. Unfortunately, finding all possible errors that result in safety violations is a very compute intensive task. We propose BinFI, a fault injection approach that efficiently injects critical faults that are highly likely to result in safety violations, based on the unique properties of DNNs. Finally, we propose Ranger, an approach to protect DNNs from critical faults with minimal performance overheads and no accuracy loss. We will conclude by presenting some of our ongoing work, and the future challenges in this area.

Fast and simultaneous identification of multiple viable pathogens on food is critical to public health. Here we report a pathogen identification system using a paper chromogenic array (PCA) enabled by machine learning. The PCA consists of a paper substrate impregnated with 23 chromogenic dyes and dye combinations, which undergo colour changes on exposure to volatile organic compounds emitted by pathogens of interest. These colour changes are digitized and used to train a multi-layer neural network (NN), endowing it with high-accuracy (91–95%) strain-specific pathogen identification and quantification capabilities. The trained PCA–NN system can distinguish between viable Escherichia coli, E. coli O157:H7 and other viable pathogens, and can simultaneously identify both E. coli O157:H7 and Listeria monocytogenes on fresh-cut romaine lettuce, which represents a realistic and complex environment. This approach has the potential to advance non-destructive pathogen detection and identification on food, without enrichment, culturing, incubation or other sample preparation steps. Fast and simultaneous identification of multiple viable pathogens on food is critical to public health. By integrating paper chromogenic arrays (PCAs) and machine learning, a system was developed to automatically recognize PCA patterns on multiplexed viable pathogens with strain-level specificity.

With the arrival of the Internet and social media, at the same time as masses of humans have benefitted from the full-size reassets of records available, there was an full-size boom with inside the upward push of cyber-crimes, mainly targeted closer to women. According to a 2019 file with inside the Economics Times, India has witnessed a 457% upward push in cybercrime with inside the 5 years span among 2011 and 2016. Most speculate that that is because of effect of social media inclusive of Facebook, Instagram and Twitter on our day by day lives. While those simply assist in growing a legitimate social network, advent of consumer debts in those websites normally desires simply an email-id. A actual lifestyles man or woman can create more than one fake IDs and for this reason impostors can effortlessly be made. Unlike the actual international state of affairs in which more than one policies and guidelines are imposed to become aware of oneself in a completely unique manner (as an instance at the same time as issuing one’s passport or driver’s license), with inside the digital international of social media, admission does now no longer require this kind of checks. In this paper, we study the one-of-a-kind debts of Instagram, specifically and try and verify an account as fake or actual the use of Machine Learning strategies specifically Logistic Regression and Random Forest Algorithm.

We report a multiplexed paper-based assay powered by mobile imaging and machine learning for point-of-care diagnosis of Lyme Disease. Blind testing of 96 serum samples showed a sensitivity and specificity of 85.7% and 96.3%, respectively.

Cancer is characterized as a heterogeneous disease of various types. The early detection and prognosis of a cancer type have turned into a major requirement, as it facilitates successive medical treatment of patients. The research team has classified the cancer patients into high or low-risk groups. This makes it a significant task for the medical teams to study the application of deep learning and machine learning models. As a result, such techniques have been employed for modeling the development and treatment of cancer conditions. Additionally, the machine learning tools can have the ability the significant detection features from complex datasets. Numerous techniques like Support Vector Machines (SVM), Bayesian Networks (BN), Decision Trees (DT), Artificial Neural Networks (ANN), Recurrent Neural Network (RNN), and Deep Neural Network (DNN) has been broadly utilized in cancer research. As per the current survey, the detection rate is about 99.89%, which shows the prediction models' efficiency and precise decision making. However, it is proven that deep learning and machine learning approaches can enhance cancer progression. An adequate level of estimation is required for such approaches for considering the daily medical practice. This survey analyzes and learns the diverse contributions of cancer prediction models using intelligent approaches. Further, the paper tries to categorize the different algorithms, the utilized datasets, and utilized environments. Along with this, various performance measures evaluated in each contribution is sorted out. An extensive search is conducted relevant to machine learning and deep learning methods in cancer susceptibility, recurrence, and survivability prediction, and the existing challenges in this area are clearly described. However, ML models are still in the testing as well as the experimentation phase for cancer prognoses. As the datasets are getting larger with higher quality, researchers are building increasingly accurate models. Moreover, ML models have a long way to go, and most of the models still lack sufficient data and suffer from bias.

Machine learning, a branch of artificial intelligence, is increasingly used in health research, including nursing and maternal outcomes research. Machine learning algorithms are complex and involve statistics and terminology that are not common in health research. The purpose of this methods paper is to describe three machine learning algorithms in detail and provide an example of their use in maternal outcomes research. The three algorithms, classification and regression trees, least absolute shrinkage and selection operator, and random forest, may be used to understand risk groups, select variables for a model, and rank variables’ contribution to an outcome, respectively. While machine learning has plenty to contribute to health research, it also has some drawbacks, and these are discussed as well. In order to provide an example of the different algorithms’ function, they were used on a completed cross-sectional study examining the association of oxytocin total dose exposure with primary cesarean section. The results of the algorithms are compared to what was done or found using more traditional methods.

Heart disease has been one of the ruling causes for death for quite some time now. About 31% of all deaths every year in the world take place as a result of cardiovascular diseases [1]. A majority of the patients remain uninformed of their symptoms until quite late while others find it difficult to minimise the effects of risk factors that cause heart diseases. Machine Learning Algorithms have been quite efficacious in producing results with a high level of correctness thereby preventing the onset of heart diseases in many patients and reducing the impact in the ones that are already affected by such diseases. It has helped medical researchers and doctors all over the world in recognising patterns in the patients resulting in early detections of heart diseases.

Paper-based digital microfluidic biochips (or P-DMFBs) are becoming highly impelling due to its low-cost and in-place fabrication of electrodes and control wiring on a single piece of paper having an inkjet printer and conductive ink. Despite enormous advantages, several complex design rules also subsist, such as avoidance of induced control interference, minimum separation among the control lines, and congestion-free wiring on a single layer, which is to be correlated leading toward overall feasibility of the design. Several cost raising issues, such as schedule length, control pin count, and wire length, must be considered for attaining a successful fluid-control codesign. Moreover, design gaps exist among the subtasks of the fluid level, control level, and fluid-control design as a whole, which undeniably impose expensive design cycles increasing overall cost. This article builds a machine learning-based model for the pin-constrained P-DMFBs to predict violation in control design beforehand and accordingly guides the fluid-control codesign to tackle important cost-driving issues while attaining congestion- and conflict-free wiring. This model effectively eliminates the design cycles producing a low-cost platform. The predictive model has been evaluated over a balanced data set. Several benchmarks for assessing the performance are studied.

The development of microfluidic devices for point-of-care (POC) testing has been widely applied for food quality control, environmental monitoring, and clinical diagnoses. Regarding the latter, microfluidic paper-based analytical devices (µPADs) have a great potential in developing portable and disposable platforms for fast disease-relevant biomarker detection in remote areas. In this work, k-nearest neighbors (k-NN) classifiers were applied to demonstrate the reliability of using chemical data obtained from µPADs for diagnosis of diseases like diabetes mellitus and hyperuricemia. Predictors based on glucose, lactate, and uric acid biomarkers were evaluated to reach this goal. Healthy adults were differentiated from the diagnosed patients with a perfect success rate. Metabolic disorders were suitably predicted with 95.0% overall accuracy. This model also showed sensitivities and specificities in the ranges 75–100% and 93–100%, respectively, indicating that the classification protocol is robust. The k-NN modeling proved the potential of the µPADs to be applied in telemedicine for reliable off-site diagnoses.

Exam paper generation is an indispensable part of teaching. Existing methods focus on the use of question extraction algorithms with labels for each question provided. Obviously, manual labeling is inefficient and cannot avoid label bias. Furthermore, the quality of the exam papers generated by the existing methods is not guaranteed. To address these problems, we propose a novel approach to generating exam papers based on prediction of exam performance. As such, we update the quality of the initially generated questions one by using dynamic programming, as well as in batches by using genetic algorithms. We performed the prediction task by using Deep Knowledge Tracing. Our approach considered the skill weight, difficulty, and distribution of exam scores. By comparisons, experimental results indicate that our approach performed better than the two baselines. Furthermore, it can generate exam papers with adaptive difficulties closely to the expected levels, and the related student exam scores will be guaranteed to be relatively reasonable distribution. In addition, our approach was evaluated in a real learning scenarios and shows advantages.

Paper-based devices are an excellent match for low-cost point-of-care testing (POCT) tools. Their user-friendliness, portability, and short time of analysis, coupled with ease of local manufacture make these devices the best option for inexpensive diagnostic testing tools. However, despite all their positive features, these low-cost diagnostic devices must present good performance indicators, such as sensitivity, specificity, and accuracy. We developed and validated a paper-based ELISA for toxoplasmosis diagnosis through the detection of Toxoplasma gondii immunoglobulin G (IgG) antibodies in 100 human serum samples. From among the different ways to define the cut-off value, we chose Youden's J index (cut-off = 21.73 A.U.), which presented a higher sensitivity value. Our paper-based assay presented a sensitivity of 0.96, a specificity of 0.87, and a gray zone comprising 16 samples (±15% of the cut-off value, with 3 false positive outputs). The accuracy of the test was estimated by using ROC curves (AUC = 0.97). We also created a macro in Microsoft Excel® to estimate the accuracy of the test (m-Accuracy) based on a non-parametric method, which evidenced a value = 0.88, which classifies our test as moderately to highly accurate. We also provide the m-Accuracy macro for download and the paper-based microplate designs for printing, in order to collaborate with the scientific community and facilitate further studies using this platform. The improvement of these diagnostic tools can bring this technology for those who need it, contributing to population health and well-being.

Objective Our aim was to develop an efficient search strategy for prognostic studies and clinical prediction guides (CPGs), optimally balancing sensitivity and precision while independent of MeSH terms, as relying on them may miss the most current literature. Materials and Methods We combined 2 Hedges-based search strategies, modified to remove MeSH terms for overall prognostic studies and CPGs, and ran the search on 269 journals. We read abstracts from a random subset of retrieved references until ≥ 20 per journal were reviewed and classified them as positive when fulfilling standardized quality criteria, thereby assembling a standard dataset used to calibrate the search strategy. We determined performance characteristics of our new search strategy against the Hedges standard and performance characteristics of published search strategies against the standard dataset. Results Our search strategy retrieved 16 089 references from 269 journals during our study period. One hundred fifty-four journals yielded ≥ 20 references and ≥ 1 prognostic study or CPG. Against the Hedges standard, the new search strategy had sensitivity/specificity/precision/accuracy of 84%/80%/2%/80%, respectively. Existing published strategies tested against our standard dataset had sensitivities of 36%–94% and precision of 5%–10%. Discussion We developed a new search strategy to identify overall prognosis studies and CPGs independent of MeSH terms. These studies are important for medical decision-making, as they identify specific populations and individuals who may benefit from interventions. Conclusion Our results may benefit literature surveillance and clinical guideline efforts, as our search strategy performs as well as published search strategies while capturing literature at the time of publication.

This chapter focuses on cost control by analyzing the intelligent control system of waste paper deinking production line, and finally designs a solution. In the aspect of control index, machine learning has designed a solution that pays less attention to the benefit of a single control loop and focuses on maximizing the overall benefit of the production line. In the aspect of control demand, according to the complexity of waste paper deinking production line, a distributed control solution is designed Finally, according to the dynamic fuzziness in machine learning system, the basic concept of dynamic fuzzy machine learning is constructed by using dynamic fuzzy set The dynamic fuzzy machine learning model is described and the related learning algorithm is given. Finally, a simulation example is given, and satisfactory results are obtained by comparing with the elastic BP algorithm RPROP of neural network.

Laser-induced breakdown spectroscopy (LIBS) is an important analysis technique with applications in many industrial branches and fields of scientific research. Nowadays, the advantages of LIBS are impaired by the main drawback in the interpretation of obtained spectra and identification of observed spectral lines. This procedure is highly time-consuming since it is essentially based on the comparison of lines present in the spectrum with the literature database. This paper proposes the use of various computational intelligence methods to develop a reliable and fast classification of quasi-destructively acquired LIBS spectra into a set of predefined classes. We focus on a specific problem of classification of paper-ink samples into 30 separate, predefined classes. For each of 30 classes (10 pens of each of 5 ink types combined with 10 sheets of 5 paper types plus empty pages), 100 LIBS spectra are collected. Four variants of preprocessing, seven classifiers (decision trees, random forest, k-nearest neighbor, support vector machine, probabilistic neural network, multi-layer perceptron, and generalized regression neural network), 5-fold stratified cross-validation, and a test on an independent set (for methods evaluation) scenarios are employed. Our developed system yielded an accuracy of 99.08%, obtained using the random forest classifier. Our results clearly demonstrates that machine learning methods can be used to identify the paper-ink samples based on LIBS reliably at a faster rate.

The confluence of significant computational power and inexpensive sensors provides the opportunity to reliably collect large volumes of information from the world and extract humanly useful information resources. This paper reviews a coherent body of work over the last 20+ years focused on development of advanced bio-inspired computing techniques, and their applications primarily for human related data in behaviour and human centered computing. We close with a synthesis proposing an experiment analysis methodology combining these tools.

Due to the increasing size of s (s), their design and optimization phases (i.e., ) grow increasingly complex. At design time, a large design space needs to be explored to find an implementation that fulfills all specifications and then optimizes metrics like energy, area, delay, reliability, etc. At run time, a large configuration space needs to be searched to find the best set of parameters (e.g., voltage/frequency) to further optimize the system. Both spaces are infeasible for exhaustive search typically leading to heuristic optimization algorithms that find some trade-off between design quality and computational overhead. ML can build powerful models that have successfully been employed in related domains. In this survey, we categorize how () may be used and is used for design-time and run-time optimization and exploration strategies of s. A meta-study of published techniques unveils areas in that are well-explored and underexplored with, as well as trends in the employed algorithms. We present a comprehensive categorization and summary of the state of the art on for. Finally, we summarize remaining challenges and promising open research directions.

A method for image retrieval based on supervised local regression and global alignment (sLRGA) with relevance feedback for insect identification is presented in this paper. Based on the novel sLRGA, which is an extended version of LRGA, the proposed method estimates ranking scores for image retrieval in such a way that the neighborhood structure of a feature space of the database can be optimally preserved with consideration of class information. This is the main contribution of this paper. By measuring the relevance between all of the images and the query image in the database, sLRGA realizes accurate image retrieval. Furthermore, when positive/negative labels to retrieved images are given by users, the proposed method can improve image retrieval performance considering the query relevance information via use of both relevance feedback and sLRGA. This is the second contribution of this paper. Experimental results show the effectiveness of the proposed method.

Usually, scientific research begins with the collection of data in which online social media tools can be some of the most rewarding and informative resources. The extensive measure of accessible information pulls in users from undergraduate students to postdoc. The search for scientific themes has popularized due to the availability of abundant publications that resides in scientific social networks such as Mendeley, ResearchGate etc. Articles are published on these media inform of text for knowledge dissemination, scientific support, research, updates etc, and are frequently uploaded after its publication in a proceedings or journal. In this sense, data collected from database often contains high noise and its analysis can be treated as a characterization undertaking as it groups the introduction of a content into either good or bad. In this text, we present quantitative and qualitative analysis of papers popularity in Mendeley repository by using naive Bayes Classifier.

Function-as-a-Service (FaaS) has raised a growing interest in how to "tame" serverless to enable domain-specific use cases such as data-intensive applications and machine learning (ML), to name a few. Recently, several systems have been implemented for training ML models. Certainly, these research articles are significant steps in the correct direction. However, they do not completely answer the nagging question of when serverless ML training can be more cost-effective compared to traditional "serverful" computing. To help in this task, we propose MLLess, a FaaS-based ML training prototype built atop IBM Cloud Functions. To boost cost-efficiency, MLLess implements two key optimizations: a significance filter and a scale-in auto-tuner, and leverages them to specialize model training to the FaaS model. Our results certify that MLLess can be 15X faster than serverful ML systems [24] at a lower cost for ML models (such as sparse logistic regression and matrix factorization) that exhibit fast convergence.

Spatial visualization—the ability to mentally imagine and manipulate objects—has frequently been measured using the Paper Folding Test (PFT). In this task, participants view diagrams of a paper being folded and a hole being punched. They then identify the resulting punch pattern. Although task instructions promote mentally unfolding the paper, the extent to which people follow this spatial visualization strategy is unknown. The present work assesses hypothesized PFT solution strategies and their relation to problem attributes. Accuracy was impacted by the interaction between fold types, linear mixed models revealed greater use of simple heuristics compared to the suggested unfolding. Furthermore, most participants used a single strategy but simple heuristics were more often used than unfolding. Given this, we recommend redesigning the PFT to utilize the prevalence of strategy use to assess individual differences.

Automatic data processing represents the future for the development of any system, especially in scientific research. In this paper, we describe one of the automatic classification methods applied to scientific research as a supervised learning task. Throughout the process, we identify the main features that are used as keys to play a significant role in terms of predicting the new rank under the supervised learning setup. First, we propose an overview of the work that has been realized in ranking scientific research papers. Second, we evaluate and compare some of state-of-the-art for the classification by supervised learning, semi-supervised learning and non-supervised learning. During the preliminary tests, we have obtained good results for performance on realistic corpus then we have compared performance metrics, such as NDCG, MAP, GMAP, F-Measure, Precision and Recall in order to define the influential features in our work. Keywords: Scientific research, Ranking scientific research papers, Data mining, Supervised learning, Multilayer perceptron algorithm

Machine learning (ML) components are increasingly adopted in many automated systems. Their ability to learn and work with novel input/incomplete knowledge and their generalization capabilities make them highly desirable solutions for complex problems. This has motivated the inclusion of ML techniques/components in products for many industrial domains including automotive systems. Such systems are safety-critical systems since their failure may cause death or injury to humans. Therefore, their safety must be ensured before they are used in their operational environment. However, existing safety standards and Verification and Validation (V&V) techniques do not properly address the special characteristics of ML-based components such as non-determinism, non-transparency, instability. This position paper presents the authors' view on the safety of automotive systems incorporating ML-based components, and it is intended to motivate and sketch a research agenda for extending a safety standard, namely ISO 26262, to address challenges posed by incorporating ML-based components in automotive systems.

This companion paper supports the replication of the fashion trend forecasting experiments with the KERN (Knowledge Enhanced Recurrent Network) method that we presented in the ICMR 2020. We provide an artifact that allows the replication of the experiments using a Python implementation. The artifact is easy to deploy with simple installation, training and evaluation. We reproduce the experiments conducted in the original paper and obtain similar performance as previously reported. The replication results of the experiments support the main claims in the original paper.

Blind natural video quality assessment (BVQA), also known as no-reference video quality assessment, is a highly active research topic. In our recent contribution titled "Blind Natural Video Quality Prediction via Statistical Temporal Features and Deep Spatial Features" published in ACM Multimedia 2020, we proposed a two-level video quality model employing statistical temporal features and spatial features extracted by a deep convolutional neural network (CNN) for this purpose. At the time of publishing, the proposed model (CNN-TLVQM) achieved state-of-the-art results in BVQA. In this paper, we describe the process of reproducing the published results by using CNN-TLVQM on two publicly available natural video quality datasets.

Paper-based analytical devices (PADs) employing colorimetric detection and smartphone images have gained wider acceptance in a variety of measurement applications. The PADs are primarily meant to be used in field settings where assay and imaging conditions greatly vary resulting in less accurate results. Recently, machine learning (ML) assisted models have been used in image analysis. We evaluated a combinations of four ML models - logistic regression, support vector machine, random forest, and artificial neural network, and three image color spaces - RGB, HSV, and LAB for their ability to accurately predict analyte concentrations. We used images of PADs taken at varying lighting conditions, with different cameras, and users for food color and enzyme inhibition assays to create training and test datasets. Prediction accuracy was higher for food color than enzyme inhibition assays in most of the ML model and colorspace combinations. All models better predicted coarse level classification than fine grained concentration labels. ML models using sample color along with a reference color increased the models’ ability in predicting the result in which the reference color may have partially factored out the variation in ambient assay and imaging conditions. The best concentration label prediction accuracy obtained for food color was 0.966 when using ANN model and LAB colorspace. The accuracy for enzyme inhibition assay was 0.908 when using SVM model and LAB colorspace. Appropriate model and colorspace combinations can be useful to analyze large numbers of samples on PADs as a powerful low-cost quick field-testing tool.

Statistical modeling allows students to construct and improve representations based on their experiences. A model development sequence is used with fifth graders to build models for comparing two distributions of the flight durations of paper helicopters. Emphasis is on the role of the teacher and using models as evidence.

Machine learning has been applied to several problems in particle physics research, beginning with applications to high-level physics analysis in the 1990s and 2000s, followed by an explosion of applications in particle and event identification and reconstruction in the 2010s. In this document we discuss promising future research and development areas for machine learning in particle physics. We detail a roadmap for their implementation, software and hardware resource requirements, collaborative initiatives with the data science community, academia and industry, and training the particle physics community in data science. The main objective of the document is to connect and motivate these areas of research and development with the physics drivers of the High-Luminosity Large Hadron Collider and future neutrino experiments and identify the resource needs for their implementation. Additionally we identify areas where collaboration with external communities will be of great benefit., Comment: Editors: Sergei Gleyzer, Paul Seyfert and Steven Schramm

In modern academic social network, it is very difficult for scholars to find academic papers consistent with their research direction. Time is a critical factor in paper recommendation. As time goes on, the impact of an academic paper would gradually fade. Likewise, the research interests of users may also change. Therefore, we propose a temporal perceptual neural collaborative filtering model that integrates the multi-dimensional features of papers. We conducted our experiments on the dataset from CiteULike, comparing the recommended results by using four time-decay functions and evaluating our model with multiple evaluation indicators. The satisfactory results show that our model is effective in filtering out the expired papers by considering the characteristics of papers and the changes of scholars' interests.

Measuring the quality of research work is an essential component of the scientific process. With the ever-growing rates of articles being submitted to top-tier conferences, and the potential consistency and bias issues in the peer review process identified by scientific community, it is thus of great necessary and challenge to automatically evaluate submissions. Existing works mainly focus on exploring relevant factors and applying machine learning models to simply be accurate at predicting the acceptance of a given academic paper, while ignoring the interpretability power which is required by a wide range of applications. In this paper, we propose a framework to construct decision sets that consist of unordered if-then rules for predicting paper acceptance. We formalize decision set learning problem via a joint objective function that simultaneously optimize accuracy and interpretability of the rules, rather than organizing them in a hierarchy. We evaluate the effectiveness of the proposed framework by applying it on a public scientific peer reviews dataset. Experimental results demonstrate that the learned interpretable decision sets by our framework performs on par with state-of-the-art classification algorithms which optimize exclusively for predictive accuracy and much more interpretable than rule-based methods.

Background and ObjectiveQuestionnaires are essential tools in many scientific fields, including health and medicine. However, the analysis of paper-and-pencil questionnaires is time consuming, source of errors and expensive, limiting its use in large cohort studies. Computer-based questionnaires might be a valuable alternative but they may introduce bias, especially for sensitive questions, and they require programming skills. The aim of this study is to develop a reliable and adaptable open-source technique (i.e. LightQuest) to automatically analyse various types of scanned paper-and-pencil questionnaires with closed questions, including those with inverted scale.MethodsTo evaluate the usefulness of LightQuest, the time needed for 7 experimenters for manually code 10 sets of 4 frequently used questionnaires and the number of errors (i.e. reliability) were compared with the time and errors their made using LightQuest.ResultsLightQuest was twice as fast as the manual analysis, even though the time to create the reference model was taken into account (933s vs. 1935s, t(2)=8.81, p-1 for the manual technique versus 0.55s.question-1 for LightQuest (t(2)=22.5, pConclusionLightQuest demonstrated clear superiority both in terms of time and reliability. The script of this first open-source technique, which does not require programming skills, is downloadable in supplemental data and may become an asset for all studies using questionnaires.

Automatically detecting the positions of key-points (e.g., facial key-points or finger key-points) in an image is an essential problem in many applications, such as driver's gaze detection and drowsiness detection in automated driving systems. With the recent advances of Deep Neural Networks (DNNs), Key-Points detection DNNs (KP-DNNs) have been increasingly employed for that purpose. Nevertheless, KP-DNN testing and validation have remained a challenging problem because KP-DNNs predict many independent key-points at the same time -- where each individual key-point may be critical in the targeted application -- and images can vary a great deal according to many factors. In this paper, we present an approach to automatically generate test data for KP-DNNs using many-objective search. In our experiments, focused on facial key-points detection DNNs developed for an industrial automotive application, we show that our approach can generate test suites to severely mispredict, on average, more than 93% of all key-points. In comparison, random search-based test data generation can only severely mispredict 41% of them. Many of these mispredictions, however, are not avoidable and should not therefore be considered failures. We also empirically compare state-of-the-art, many-objective search algorithms and their variants, tailored for test suite generation. Furthermore, we investigate and demonstrate how to learn specific conditions, based on image characteristics (e.g., head posture and skin color), that lead to severe mispredictions. Such conditions serve as a basis for risk analysis or DNN retraining., to appear in ISSTA 2021

Due to the increasingly growing demand for user identification on cell phones, PCs, laptops, and so on, face anti-spoofing has risen to significance and is an active research area in academia and industry. The detection of the real face then recognize it present an important challenge regarding the techniques that can be used to spoof any recognition system like masks, printed photos. This paper we present an anti-spoofing face method to solve the real-world scenario that learns the target domain classifier based on samples used for training in a particular source domain. Specifically, with the conventional regression CNN, the Spatial/Channel-wise Attention Modules were introduced. Two modules, namely the Spatial-wise Attention Module and the Channel-wise Attention Module, were used at spatial and channel levels to improve local features and ignore the irrelevant features. Extensive experiments on current collections with benchmarks datasets verifies that the recommended solution will significantly benefit from the two modules and better generalization capability by providing significantly improved results in anti-spoofing.

Drowsiness can be dangerous when performing tasks that require constant attention, such as driving a vehicle. Sleepiness is correlated with a variety of physiological variables, such as eye closing, head movements, pulse rate, eye twitch rate, etc. Also, the yawn can be considered as an accurate indicator of drowsiness and fatigue. Yawning detection is very important for the safety purpose of drivers as it will let the driver know if he/she is getting drowsy. Driving at that moment may not be safe. Several automatic yawning detection techniques have been developed for driver's drowsiness monitoring system. Nevertheless, correctly detecting the yawning of the driver and predicting exhaustion in real-time situations is still a crucial challenge. In this paper, we will be reviewing various existing machine learning approaches for driver's yawning detection. In previous approaches, various classical machine learning algorithms such as viola-Jones, contour activation algorithm and SVM have been used for yawning detection, but these approaches failed to predict yawning in realtime situations. Using Deep learning techniques, we can make a real-time yawn detection system with high accuracy. We find that some precious Deep learning algorithms like CNN, RNN, LSTM, Bi-LSTM can detect the patterns with high accuracy. After the comparison of various algorithms and techniques, we find that with the help of Deep learning algorithms the yawning can be detected in real time with high accuracy.