Search

The insufficient recognition of injuries by the BB-gun (regarded as toys for children) has led to its increasing misuse without permission, which has caused many public safety issues. Aiming to enhance the understanding of the injuries by the BB-gun, the experimental and numerical study of BB-Gun pellet penetrating "cowhide + gelatine" composite target was comprehensively carried out. It was confirmed from the experiment that BB-Gun is capable of inflicting severe or fatal wounds to important organs, and perforating the skin or not could be employed to evaluate the safety of BB-guns. Moreover, three forms of ballistic limit (including: velocity, kinetic energy and specific kinetic energy) of typical BB were calculated and analyzed by reasonably validated numerical simulation method. Additionally, a formulation was acquired by dimensional analysis based on the simulation results and was verified to accurately predict the ballistic limit velocity of BB with different mechanical properties. The method may help to improve the understanding on the minimal velocity needed to perforate skin and may be advised as the determination of the safety of BB-gun. [ABSTRACT FROM AUTHOR]

Synthetic models, also called "surrogates", are commonly used in wound ballistics in order to simulate human tissues. Despite several surrogates are worldwide accepted and used; some of them have not been yet fully validated and their limits for forensic reconstructions have not been deeply investigated yet. In this work we present a homicide/suicide case involving three gunshots to the head with bullets retained in the skull or beneath the scalp. Reconstruction of these cases was performed preparing three individual synthetic head models based on post-mortem computed tomography (PMCT) measurements. Ballistic soap, polyurethane plates and 10% ballistic gelatine at 4°C were used as simulants in individually adapted thickness. Ballistic tests were performed using the questioned firearm and ammunition type. The damages on the synthetic models have been compared to the findings in PMCT and autopsy of the victims. Although the results highlighted general similarities in terms of injury characteristics, some of the experimental shots overpenetrated. Furthermore, the bullets recovered in the synthetic models did not show the same quality of deformations as the questioned bullets. This lack of bullet deformation in the synthetic models might be mainly attributed to the physical difference between real bones and polyurethane surrogate. [ABSTRACT FROM AUTHOR]

Gun violence is a global phenomenon with regional variation in frequency and severity. Handguns are often used in violent deaths such as suicides and homicides. Hence, ballistic trauma is a critical subject of forensic investigations. Trauma patterns are fundamental evidence for the reconstruction of the incident and for the determination of the manner of death. This study investigated the differences in trauma patterns with a series of experiments using six different calibers (.22 LR, .38 Special, .380 ACP, 9×19mm, .40 S&W, and .45 ACP) and four different bullet types. Synbone® spheres (polyurethane bone proxies) were used for close range 30cm simulated executions. The polyurethane spheres constitute an excellent proxy for human crania at the macroscopic level as suggested by other studies. The results showed that the radius of the entrance wound is positively correlated (Pearson's correlation coefficient R=0.846, p<0.05) with the caliber dimension. As muzzle velocity increased, endocranial beveling increased. Bullet weight, conversely, does not seem to have an effect on the size of the endocranial beveling present in Synbone® spheres. The ballistic experiments exhibited similarities in entrance wound morphology; radial and concentric fracture patterns, hydraulic burst effect, circumferential delamination, and endocranial beveling with that of documented forensic cases with corresponding caliber shot. Synbone spheres seem appropriate for ballistic simulations of cranial injuries; yet, more research is needed to verify these observations. [ABSTRACT FROM AUTHOR]