Search

The demand for construction timber is continuously increasing, due to its favourable characteristics. However, the adequate protection of wood is key to its successful use, as it is flammable and susceptible to biodegradation. Given that thermal modification enhances the durability of wood, and mineralisation with CaCO3 considerably improves its fire properties, it is worth considering the combined effects of the two methods. European beech (Fagus sylvatica) was selected to determine the effects of a) thermal modification, b) mineralisation through the in-situ formation of CaCO3, and c) a combination of the two procedures, on resistance to decay fungi, reaction to fire and the mechanical properties of the wood. Microscopic analysis and comparisons of the samples before and after exposure to fungi were also conducted. Mineralised wood generally had a slightly alkaline pH value and higher equilibrium moisture content, while thermal modification lowered the equilibrium moisture content. The present study demonstrated the combined effect of thermal modification and mineralisation: the best response to fire as well as resistance to fungi was achieved when the two treatments were combined. Results from the Brinell hardness and three-point bending tests indicate that both modification procedures can slightly impair the mechanical properties of the wood. [ABSTRACT FROM AUTHOR]

This study aimed to evaluate the impact of thermal modification on the physical and mechanical properties of three different wood species from Bosnia and Herzegovina, namely beech wood (Fagus sylvatica L.), linden wood (Tilia cordata), and silver fir wood (Abies alba). The samples underwent thermal modification at five different temperatures (170 °C, 180 °C, 195 °C, 210 °C, and 220 °C) for varying durations (ranging from 78 to 276 min). After treatment, they were exposed to outdoor conditions for twelve months. The study examined the four-point bending strength, tensile force, color change, and surface quality of the modified and unmodified samples. The results showed that outdoor exposure negatively impacted the mechanical properties of the unmodified samples, especially in the linden wood which was 41% and the beech wood which was 42%. Additionally, outdoor exposure caused significant surface cracks in the thermally modified linden and beech wood. The study also found prominent color changes in the modified and unmodified samples during twelve months of exposure. The roughness of the samples was determined with a confocal laser scanning microscope, which showed that the roughness increased on both the axial and the longitudinal surfaces after weathering. The highest roughness for the fir wood was determined to be 15.6 µm. Overall, this study demonstrates the importance of wood modification and its impact on the use-value of wood products. [ABSTRACT FROM AUTHOR]

Simple Summary: Over the past thirty years, the thermal modification of wood has become a universally recognised and commercialised wood modification process. Thermal modifications may affect wood properties, either positively (dimensional stability and decay resistance) or negatively (mechanical properties). The combination of the impregnation of specific reagents with thermal modification may help to overcome the negative effects on wood properties. In this study, we evaluate the effect of a combination of two zwitterionic buffers, bicine and tricine, and thermal modification of two wood species (beech and spruce) against subterranean termites and their symbiotic fauna. Bicine and tricine treatments alone had a clear influence on wood mass loss and termite survival. The flagellate protist symbiotic community was affected by the treatments and responded differently to them, as a highly adaptable community. However, the combination of bicine with the thermal modification showed a negative effect on termites and their symbionts on both wood species. The combination of these different factors should be further investigated, as these results seem to be promising with regard to the enhancement of the termite resistance of wood. The majority of thermal modification processes are at temperatures greater than 180 °C, resulting in a product with some properties enhanced and some diminished (e.g., mechanical properties). However, the durability of thermally modified wood to termite attack is recognised as low. Recent attempts at combining thermal modification with chemical modification, either prior to or directly after the thermal process, are promising. Buffers, although not influencing the reaction systems, may interact on exposure to certain conditions, potentially acting as promoters of biological changes. In this study, two zwitterionic buffers, bicine and tricine, chosen for their potential to form Maillard-type products with fragmented hemicelluloses/volatiles, were assessed with and without thermal modification for two wood species (spruce and beech), with subsequent evaluation of their effect against subterranean termites (Reticulitermes grassei Clément) and their symbiotic protists. The effect of the wood treatments on termites and their symbionts was visible after four weeks, especially for spruce treated with tricine and bicine and heat treatment (bicine HT), and for beech treated with bicine and bicine and heat treatment (bicine HT). The chemical behaviour of these substances should be further investigated when in contact with wood and also after heat treatment. This is the first study evaluating the effect of potential Maillard reactions with zwitterionic buffers on subterranean termite symbiotic fauna. [ABSTRACT FROM AUTHOR]

The development of non-biocidal and environmentally friendly systems to protect wood against biological decay has become a high priority in recent years. In the present study the impact of an innovative modification procedure, combining two environmentally friendly modification methods: thermal modification and mineralisation, using an aqueous solution of calcium acetoacetate as a precursor, on the fungal durability of wood was evaluated. European beechwood (Fagus sylvatica) and Norway sprucewood (Picea abies) were selected as model wood species. Wood samples were treated using either a single or combination of both methods and exposed to four different fungi: Gloeophyllum trabeum , Rhodonia placenta , Trametes versicolor and Pleurotus ostreatus. The effect of the different modifications on moisture content, dynamic vapour sorption, contact angle and pH value was also evaluated. Overall, the highest durability against Rhodonia placenta , Trametes versicolor and Pleurotus ostreatus was achieved through thermal modification in both wood species, while the combination of mineralisation and thermal modification has a synergistic effect against degradation by Gloeophyllum trabeum. In the case of beechwood the mass loss decreased from 41% for native to 6% for combined modified samples. We proved that the effectiveness of different treatment against fungal decay of wood were in strong dependence of their moisture content, dynamic vapour sorption, contact angle and pH values. The role of fungi on the morphology of the wood and on crystal structure of formed carbonate was investigated using SEM-EDS analysis. [Display omitted] • Presented ecological modification of wood can be an alternative to biocides. • A significant improvement in the fungal durability of wood was achieved. • Thermal modification and mineralisation work synergistic against wood decay fungi. • The reasons for a synergistic effect of combining methods were proposed. • The mass loss decreased from 41% for native to 6% for combined modified beechwood. [ABSTRACT FROM AUTHOR]

Results of the research aimed to increase the resistance of beech and thermally modified (TM) beech wood to UV-light and weathering with impregnation with commercially available nano TiO2 suspensions, originally intended to be used as UV protective coating additives, are presented in this paper. Beech wood and TM beech wood samples were vacuum-pressure impregnated with suspensions, containing around 3% of TiO2, and in one series, the specimens were at first impregnated and thermally modified afterwards. In general, resistance to UV-light, as demonstrated by visual observation and by colour measurements was increased. Contact angle of water, liquid water absorption, and water vapour sorption also importantly influence on weathering behaviour of wood and it was shown that in general, impregnation with TiO2 particles has a positive influence with this respect. Anyway, some results of this preliminary research were ambiguous, and subsequent investigations of this novel protection method are needed and planned. [ABSTRACT FROM AUTHOR]