Search

The rheological behavior of banana puree was determined using a dynamic stress rheometer with a pressure couette fixture, which allowed experiments to be conducted at high temperature. The pressure couette was pressurized with compressed air to 206.8 kPa (gage pressure) and experiments were carried out at temperatures ranging from 30 to 120°C. The shear stress values ranged from 10 to 170 Pa and the shear rate values from 10-5 to 103s-1. The model that best fitted the experimental data at all temperatures was the Herschel-Bulkley model. There was a usual tendency for the apparent viscosity to decrease with increasing temperature but an increase in apparent viscosity with increasing from 50 to 60°C and from 110 to 120°C was found. This could be due to interaction of polysaccharides present in banana puree. There was a slight difference between the apparent viscosity values for increasing shear stress sweeps and those for the decreasing shear stress sweeps suggesting time dependency of the rheological were shown to meet these requirements. Their inclusion either individually or in combinations in `high risk" products such as salad dressings and sandwiches should be considered. [ABSTRACT FROM AUTHOR]

Thermophysical properties and hygroscopic behavior of unripe banana ( Musa cavendishii ) were studied. The sorption isotherms were measured at 25 °C, 40 °C, 50 °C and 60 °C and the observed sigmoid curves were modeled with GAB equation which satisfactorily fitted the experimental data. The mean value of monolayer moisture content ( X m ) estimated was (5.5 ± 0.6) g/100 g d.b. Drying experiments were conducted at temperatures of 40 °C, 50 °C and 60 °C and the apparent density, specific heat, thermal conductivity and thermal diffusivity – were directly measured as a function of moisture content and porosity. Empirical models obtained by nonlinear regression were successfully fitted to the thermophysical properties, important data to model and simulate the drying process. [ABSTRACT FROM AUTHOR]

[Display omitted] • An exploratory routine was carried out for a novel NSP-rich ingredient. • Interactions with water and exposure to high and low temperatures were studied. • Sorption isotherms of ripe bananas non-starch polysaccharides samples were Type III. • State diagrams of non-starch polysaccharides NSP from ripe bananas were built. • The stability criterion between water activity and glass transition was studied. In this work, an ingredient containing non-starch polysaccharides (NSP), obtained from overripe bananas, was characterized using differential scanning calorimetry (DSC) and vapor sorption isotherms. Soluble sugars from overripe bananas were extracted using ethanol, resulting in a solid NSP-rich fraction. The physical properties of this new ingredient and its response to temperature and water interactions are needed for its application as a fiber flour aggregate in food preparations. Results from thermal analyses, including gelatinization, glass transition and fusion, allowed building state diagrams, then compared to vapor sorption isotherms which resulted similar to a Brunauer–Emmet–Teller (BET) type III isotherm at 25 °C, for NSP and standards samples as arabinoxylan and polygalacturonic acid. A good fit was obtained for the glass transition curves using the Kwei model. This approach enabled us to explore the stability of the material, regarding safety limits for microbial deterioration and structural changes due to glass transition. [ABSTRACT FROM AUTHOR]

Non-starch polysaccharides recovery from overripe bananas is challenging due to the high quantities of soluble sugars accumulated during the ripening process. Non-starch polysaccharides isolated from overripe bananas may be used as a functional ingredient. Kinetic extraction of soluble sugars from ripe banana (Musa cavendishii) using ethanol as solvent is presented. Different extraction methods (mechanical stirring and ultrasound-assisted), solid/solvent ratio (1:3 and 1:5) g⋅mL−1 and temperature (25 and 65) °C were investigated. Process efficiency was evaluated through the extraction index (EI), defined as the percentage of sugar extracted after 30 min. Soluble solid extraction curves were adequately represented by Patricelli and Peleg models, but only the Patricelli model represented the water extraction adequately. The condition that maximizes the soluble solids extraction and minimizes energy consumption was 1:5 g⋅mL−1 of solid/solvent ratio, 25 °C under mechanical stirring (EI = 87 ± 1 g ss extract /100 g ss banana). • Ripe bananas were used as a source of non-starch polysaccharides (NSP). • Conventional (SLE) and ultrasound-assisted extraction (UAE) are compared. • Equilibrium condition was achieved at 30 min, with high extraction index m. • SLE, low temperature and solvent amount extracted 87 g soluble solids /100 g banana. [ABSTRACT FROM AUTHOR]