Search

A wideband planar dielectric rod antenna with substrate integrated non-radiative dielectric (SINRD) waveguide feed, is presented in this communication for W-band and up-millimeter-wave applications. The antenna and its feeding structure are integrated into a single layer substrate, which decreases the fabrication cost and integration complexity. Simulated and measured results show that the antenna has a wide bandwidth. Due to the structure of the SINRD guide which is shielded on top and bottom of the substrate, the proposed antenna is suitable for multilayer structure techniques such as LTCC or on-chip antenna. This antenna presents numerous features such as broad bandwidth, relatively high and stable gain, use of high dielectric constant substrate, and substrate-oriented end-fire radiation. The proposed antenna is suitable for gigabyte chip-to-chip communications. Measured bandwidth of the antenna is 10 GHz (93–103 GHz) while a relatively flat gain of 9.5 \pm 1~dB is obtained over the bandwidth of interest. [ABSTRACT FROM PUBLISHER]

In this article, using a novel structure, simulated and measured microwave characteristics from substrate integrated waveguide photodetector (SIWPD) are obtained and compared with the conventional microstrip waveguide photodetector. A Ka-band microstrip to rectangular waveguide multilayer transition for OC-768/STM-256 optical systems is designed and fabricated. Attenuation constant results shows that by replacing substrate integrated waveguide (SIW) instead of conventional microstrip in waveguide photodetectors, operation frequency can be increased. Microwave fields in the proposed structure show a good transition from quasi-TEM mode to TE10 mode in multilayer structure. The multilayer structure is considered to separate SIW and DC bias of the photodetector. © 2009 Wiley Periodicals, Inc. Microwave Opt Technol Lett 51: 2204–2207, 2009; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.24528 [ABSTRACT FROM AUTHOR]

A class of three-dimensional planar arrays in substrate integrated waveguide (SIW) technology is proposed, designed and demonstrated with 8 \times 16 elements at 35 GHz for millimeter-wave imaging radar system applications. Endfire element is generally chosen to ensure initial high gain and broadband characteristics for the array. Fermi-TSA (tapered slot antenna) structure is used as element to reduce the beamwidth. Corrugation is introduced to reduce the resulting antenna physical width without degradation of performance. The achieved measured gain in our demonstration is about 18.4 dBi. A taper shaped air gap in the center is created to reduce the coupling between two adjacent elements. An SIW H-to-E-plane vertical interconnect is proposed in this three-dimensional architecture and optimized to connect eight 1 \times 16 planar array sheets to the 1 \times 8 final network. The overall architecture is exclusively fabricated by the conventional PCB process. Thus, the developed SIW feeder leads to a significant reduction in both weight and cost, compared to the metallic waveguide-based counterpart. A complete antenna structure is designed and fabricated. The planar array ensures a gain of 27 dBi with low SLL of 26 dB and beamwidth as narrow as 5.15 degrees in the E-plane and 6.20 degrees in the 45^\circ-plane. [ABSTRACT FROM PUBLISHER]

This paper presents and demonstrates a class of 3-D integration platforms of substrate-integrated waveguide (SIW). The proposed right angle E-plane corner based on SIW technology enables the implementation of various 3-D architectures of planar circuits with the printed circuit board and other similar processes. This design scheme brings up attractive advantages in terms of cost, flexibility, and integration. Two circuit prototypes with both 0- and 45^\circ vertical rotated arms are demonstrated. The straight version of the prototypes shows 0.5 dB of insertion loss from 30 to 40 GHz, while the rotated version gives 0.7 dB over the same frequency range. With this H-to-E-plane interconnect, a T-junction is studied and designed. Simulated results show 20-dB return loss over 19.25% of bandwidth. Measured results suggest an excellent performance within the experimental frequency range of 32–37.4 GHz, with 10-dB return loss and less than \pm4^\circ phase imbalance. An optimized wideband magic-T structure is demonstrated and fabricated. Both simulated and measured results show a very promising performance with very good isolation and power equality. With two 45^\circ vertical rotated arm bends, two antennas are used to build up a dual polarization system. An isolation of 20 dB is shown over 32–40 GHz and the radiation patterns of the antenna are also given. [ABSTRACT FROM PUBLISHER]

The propagation and loss characteristics of the substrate-integrated rectangular waveguide (SIRW) at microwave and millimeter-wave bands are investigated. The results further verify that the substrate-integrated rectangular waveguide has nearly the same waveguide characteristics as conventional rectangular waveguides, and it can be analyzed as a rectangular waveguide with effective width of the SIRW. The insertion loss of SIRW and its equivalent rectangular waveguide agree well with each other. However, it is observed that the derivation of the propagation characteristics of the SIRW and its equivalent rectangular waveguide indicates the frequency dependency. At the X-, K-, and Ka-bands, the effective width of the equivalent rectangular waveguide given by the empirical formula [7] should be slightly increased in order to obtain the propagation characteristic that agrees better with that of the SIRW, about 2%. In addition, at the U-band, when the effective width of the equivalent rectangular waveguide is increased 5% or so, the propagation constant of the rectangular waveguide in the whole band agrees well with that of the rectangular waveguide. © 2005 Wiley Periodicals, Inc. Microwave Opt Technol Lett 46: 588–592, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.21059 [ABSTRACT FROM AUTHOR]