Search

In recent decades, metal-containing nanocomposites have attracted considerable attention from researchers. In this work, for the first time, a detailed analysis of the preparation of reactive indicator papers (RIPs) based on silver-containing nanocomposites derived from silver fumarate was carried out. Thermolysis products are silver-containing nanocomposites containing silver nanoparticles uniformly distributed in a stabilizing carbon matrix. The study of the optical properties of silver-containing nanocomposites made it possible to outline the prospects for their application in chemical analysis. RIPs were made by impregnating a cellulose carrier with synthesized silver fumarate-derived nanocomposites, which change their color when interacting with chlorine vapor. This made it possible to propose a method for the determination of chloride ions with preliminary oxidation to molecular chlorine, which is then separated from the solution by gas extraction. The subsequent detection of the active zone of RIPs using colorimetry makes it possible to identify mathematical dependences of color coordinates on the concentration of chloride ions. The red (R) color coordinate in the RGB (red-green-blue) system was chosen as the most sensitive and promising analytical signal. Calibration plots of exponential and linear form and their equations are presented. The limit of detection is 0.036 mg/L, the limits of quantification are 0.15–2.4 mg/L, and the time of a single determination is 25 min. The prospects of the developed technique have been successfully shown in the example of the analysis of the natural waters of the Don River, pharmaceuticals, and food products.

Over the past decades, tremendous technological advances have emerged in human motion analysis (HMA). How has technology for analysing human motion evolved over the past decades, and what clinical applications has it enabled? The literature on HMA has been extensively reviewed, focusing on three main approaches: Fully-Instrumented Gait Analysis (FGA), Wearable Sensor Analysis (WSA), and Deep-Learning Video Analysis (DVA), considering both technical and clinical aspects. FGA techniques relying on data collected using stereophotogrammetric systems, force plates, and electromyographic sensors have been dramatically improved providing highly accurate estimates of the biomechanics of motion. WSA techniques have been developed with the advances in data collection at home and in community settings. DVA techniques have emerged through artificial intelligence, which has marked the last decade. Some authors have considered WSA and DVA techniques as alternatives to "traditional" HMA techniques. They have suggested that WSA and DVA techniques are destined to replace FGA. We argue that FGA, WSA, and DVA complement each other and hence should be accounted as "synergistic" in the context of modern HMA and its clinical applications. We point out that DVA techniques are especially attractive as screening techniques, WSA methods enable data collection in the home and community for extensive periods of time, and FGA does maintain superior accuracy and should be the preferred technique when a complete and highly accurate biomechanical data is required. Accordingly, we envision that future clinical applications of HMA would favour screening patients using DVA in the outpatient setting. If deemed clinically appropriate, then WSA would be used to collect data in the home and community to derive relevant information. If accurate kinetic data is needed, then patients should be referred to specialized centres where an FGA system is available, together with medical imaging and thorough clinical assessments. • Gait analysis by stereophotogrammetry provides highly accurate biomechanics of motion. • Wearable sensors enable ecological data collection at home and in community setting. • Deep-learning video analysis can perform motion capture without instruments on subjects. • Several authors suggest more modern technologies shall replace traditional gait analysis. • We argue that these three technologies complement each other and shall be "synergistic". [ABSTRACT FROM AUTHOR]

In the past decade, the Chinese paper industry, which is highly polluting and energy intensive, has shown overall increases in production, sales, income, and profit, although the growth rate has declined. Overall, China’s paper industry exhibits small-scale and scattered distribution, characterized by continuous overcapacity and outdated technical knowledge. This has inevitably resulted in a variety of serious environmental problems during its development. Owing to the environmental problems resulting from the development of the paper industry, various environmental regulatory policies and measures have been adopted in China, mainly command-and-control, market-based, and voluntary policies and measures. This study identifies and analyzes particular issues inherent to China’s environmental regulatory policies and measures regarding the paper industry and proposed policy suggestions for improving the environmental regulation of China’s paper industry.

Paper has been increasingly used in recent years as a substrate in the structure of sensors to determine diverse biological and pharmaceutical molecules and ions. Potentiometric sensors built with paper offer certain improvements since they are cost–effective, portable, biodegradable, eco–friendly, disposable and easy to manufacture. Paper is also an ideal substrate to be used, considering that it is flexible, lightweight, mechanically–resistant, a good medium for immobilization and trapping, and that it can be easily chemically and physically modified for customized applications, it can adsorb and transport liquid via capillary forces, can close the electrical circuit between electrodes when wet, it can be produced in diverse geometrical dimensions and porosities. Due to these characteristics, paper–based potentiometric sensors are more eco–friendly, suitable to be used in resource–limited areas, can be used in remote locations or on–site settings with low–cost analytical instrumentation. To our knowledge, the most recent advancements in the field have not been collectively reviewed, and this is of high importance considering the rapid developments made in paper–based potentiometric sensors lately. In these review, we covered paper–based potentiometric devices developed in the very recent years, detailed their structures, and compared their certain performance parameters including detection limit, linear concentration range, response time and applicability.

This research employs critical discourse analysis (CDA) to examine a news article titled "KPU Chief Rebuffs Allegations of Bias during VP Debate" from the Jakarta Post, focusing on the transition from print to online media or E-Paper. In this research, the two main methods used to collect data are documentation via the Jakarta Post e-paper news page and content review. This approach provides the advantage of exploring information in depth and comprehensively related to the phenomenon or event that is the focus of the research. Utilizing Teun A. van Dijk's CDA framework, the analysis encompasses macro, superstructure, and micro structures. The macro-structural analysis reveals the social and political context, identifying social groups and emphasizing narrative importance. The critical discourse superstructure analysis delves into linguistic patterns, representations of power, and strategic language use. Finally, the micro-structural analysis explores word choice, grammar, writing style, and sentence structure to understand how language constructs arguments and responds to accusations. Through these lenses, the study provides a comprehensive understanding of how the news shapes and reflects social and political dynamics, contributing valuable insights into media discourse surrounding political events in Indonesia. [ABSTRACT FROM AUTHOR]

Sport Mont is an electronic and printed scientific journal that has been created in 2003 and it has been developed by Montenegrin Sport Academy. Main purpose of this journal is to represent people, the new scientific researches from sport science and medicine. This journal has been publishing 3 times per year, in February, June and October from the 2003 until nowadays. It has been published more than 1400 papers. Right now, Sport Mont is indexed in 23 scientific bases, in which the most popular are Scopus and Web of Science. In this paper, it has been made a systematic review of papers published by the lectures from Faculty from sport and physical education from Niksic in a period from 2010 to 2012. It has been founded 60 papers that were researching an amount of different areas of sport science. The results have showed that the lectures from the Faculty of Sport and Physical Education had the most interest in the area of sport training and from that area it has been founded 28 papers. When we talk about lectures that were publishing in that period, professor Dusko Bjelica has published 18 papers meaning that he has been the one who has published the most. At the end we can tell that the lectures from this faculty became very beneficent for this journal, which it shows their professionality and effort. Also, by putting this journal on the top of the area of sport science and promoting science in general in Montenegro.

Paper has been increasingly used in recent years as a substrate in the structure of sensors to determine diverse biological and pharmaceutical molecules and ions. Potentiometric sensors built with paper offer certain improvements since they are cost–effective, portable, biodegradable, eco–friendly, disposable and easy to manufacture. Paper is also an ideal substrate to be used, considering that it is flexible, lightweight, mechanically–resistant, a good medium for immobilization and trapping, and that it can be easily chemically and physically modified for customized applications, it can adsorb and transport liquid via capillary forces, can close the electrical circuit between electrodes when wet, it can be produced in diverse geometrical dimensions and porosities. Due to these characteristics, paper–based potentiometric sensors are more eco–friendly, suitable to be used in resource–limited areas, can be used in remote locations or on–site settings with low–cost analytical instrumentation. To our knowledge, the most recent advancements in the field have not been collectively reviewed, and this is of high importance considering the rapid developments made in paper–based potentiometric sensors lately. In these review, we covered paper–based potentiometric devices developed in the very recent years, detailed their structures, and compared their certain performance parameters including detection limit, linear concentration range, response time and applicability. [ABSTRACT FROM AUTHOR]

Abstract To reduce pollution emissions and achieve a cleaner production in paper industry, it is essential to understand the inner links between concentrations of gaseous pollutants, types of final products and production techniques. In this study, the concentrations of four potential gaseous pollutants, total volatile organic compounds (TVOC), formaldehyde (HCHO), hydrogen sulfide (H 2 S), and hydrocarbon compounds (C x H y), in the ambient air on thirty sampling points of five pulp and paper mills were detected and analyzed. The results were summarized with respect to the following aspects: (1) Levels of four gaseous pollutants on all the sampling points in five mills. It was obvious that the situation of gaseous pollution from pulp mill was much more serious than those from paper mills. (2) Gaseous pollutant distinctions due to different production processes. The levels of gaseous pollutants from five mills were greatly influenced by the utilized raw materials and the applied paper chemical agents (flavor, coating materials and additives) in mills. (3) Gaseous pollution comparisons at common points. At the two common points in five mills, i.e. the wet end of paper machine and the wastewater treatment process, TVOC and HCHO, C x H y and H 2 S were the main gaseous pollutants, respectively. In addition, some feasible measures to realize a cleaner production in pulping and papermaking process were also put forward in the article. Highlights • We analyze the levels of 4 gaseous pollutants on 30 sites of 5 pulp & paper mills. • Gaseous pollution distinctions due to different production processes are studied. • Feasible measures to realize the cleaner production in the processes are suggested. • Gaseous pollution are greatly affected by raw materials and added paper chemicals. [ABSTRACT FROM AUTHOR]

This paper presents at the characteristics of publications in the Journal of Astronomy and Space Sciences from 1984 to 2018. Since its first publication, a total of 1,113 papers (~35 volumes) have been published up to December 2018. While the space astronomy field has made up a large portion of the total number of papers, the number of annually published papers in this field is decreasing. In contrast, the number of papers in the space environment field has been showing an increasing trend since 2013, accounting for more than 30% of the annual publications. The participation rate of foreign researchers has been maintained at greater than 20% since 2012. Despite the decrease in the number of paper per year, there are positive developments including sustained foreign researcher participation at greater than 20% and improvements in the impact factor. We believe that JASS has the potential to enter the distinguished level of international academic journals following a well developed future road map.

Sport Mont is electronic and printed scientifi c journal and also offi cial journal of Montenegrin Sports academy which was established 2003. SMJ is published three times a year by the Montenegrin sport academy (MSA) and in it is possible to fi nd more than 1400 papers from various fi elds of sport science from word wide known scientists. In last three years more than 100 papers are published in this journal. Lecturers from Faculty for sport and physical education published 28 papers in mentioned period and in this research were analysed and classifi ed papers of following fi elds of sport science: anthropology, sport training, management and marketing in sport, sports physiology, theory of sport and physical culture, history of sport, nutrition and other areas of sport. Papers have been classifi ed according to the scientifi c fi elds they belong to and the most published papers are from anthropology fi eld of science (15). Interesting to mention is that lecturers with the most and the same number of published articles are Jovan Gardasevic and Bojan Masanovic who have 12 each (22,67%) published articles. This research can be useful for further theoretical research, as well as for theoreticians.

Background: A large number of published articlesexists, centered on pediatric and adult medulloblastomas. Objective: To accomplish a systematic review and meta-analysis concerningmedulloblastoma, focusing on the clinical features, diagnostic and currenttreatment modalities, as well as prognostic factors. Methods: In March 2020, we performed a title- focused search using Thomson Reuters Web of Science database in order to identify the most cited articles centered on adult and pediatric medulloblastomas. Results: Our search resulted in 4.779 articles, published from 1975 until March 2020. All of them combined have been cited 118,703 times, with an average citation per item of 24.84. The most cited article was published by Pomeroy SL, et al. in 2002 in Nature Journal, whereas the least cited one was published by Huang E., et al, in 2002. Conclusions: The aim of the study is, via the presentation of the 100 most cited papers focused on medulloblastoma, to describe their relevant contribution regarding advances in therapeutic prospects, prognosis, molecular characteristics andreconsideration of treatment protocols.We describe how, and to what degree, the treatment guidelines and management of this tumor have changed from 1975 to 2020. We reviewrecent advances in cancer genomics which have revealed 4 distinct subgroups of medulloblastomas, as well asthe importance of molecular biology on the development of new treatment features. We aim not only to answer the question: WHAT were the most cited publications, but also to approach the question of WHY the most-cited sources were so.