Search

Glenoid component loosening remains the most common reason for revision of anatomic total shoulder arthroplasty (aTSA). We assessed early clinical and radiographic outcomes following aTSA using a press-fit short stem and a peripherally enhanced fixation glenoid. 275 consecutive patients with end-stage glenohumeral arthritis and Walch A- or B-type glenoid morphology who underwent primary aTSA in 2017-2018 at two high-volume shoulder arthroplasty institutions were evaluated, and patient-reported outcomes (PROMs) and radiographic findings were studied in those with completed baseline and minimum 2-year follow-up, respectively. Patient demographics, glenoid morphology, body mass index (BMI), Charlson Comorbidity Index (CCI), range of motion, American Shoulder and Elbow Surgeons (ASES) score, and Simple Assessment Numeric Evaluation score were collected. Radiographic analysis of glenoid and humeral components was performed. Multivariable logistic, equal adjacent odds ordinal, and beta regression were respectively used to identify predictors of glenoid radiolucent lines, humeral calcar resorption, and total ASES score. Patients were 43% female, with a mean age of 66, a median BMI of 30, and median follow-up of 28.4 months. ASES and Simple Assessment Numeric Evaluation scores improved by respective medians of 54.4 and 55.0 points, forward elevation by median 35°, and external rotation by median 30° (all P <.001 for preoperative to postoperative change). Postoperative radiographs of 177 cases showed 10 (5.7%) glenoid osteolysis, 51 (28.8%) glenoid radiolucent lines, and 81 (45.8%) calcar resorptions. The follow-up duration (median 40.1 vs. 27.2 months; P <.001), BMI (median 27.5 vs. 30.7; P <.001), and Charlson Comorbidity Index (Q3 0 vs. 1; P =.02) were associated with glenoid osteolysis in bivariate analyses. In multiple logistic regression, surgeon (C vs. A/B) was the only statistically significant predictor of glenoid radiolucent lines [OR 0.27, 95% CI (0.1, 0.8)]. By descending importance, Surgeon C [OR 6.5 (2.0, 20.5)], humeral canal filling ratio [upper vs. lower quartile OR 2.3 (1.3, 4.0)], mediolateral humeral head deviation [upper vs. lower quartile OR 1.9 (1.0, 3.5)], and glenoid osteolysis [OR 13.5 (2.6, 71.6)] significantly predicted greater calcar resorption. Longer follow-up duration marginally statistically significantly predicted lower ASES score [upper vs. lower quartile OR 0.8 (0.6, 1.0)]. Following aTSA with a peripherally enhanced fixation glenoid, pain, range of motion, and patient-reported outcomes significantly improved at a minimum of 2 years with only 5.7% glenoid osteolysis despite heterogeneous preoperative glenoid pathologies. [ABSTRACT FROM AUTHOR]

Background: Posterior glenoid bone loss is commonly associated with primary glenohumeral osteoarthritis. Surgical management of bone loss in anatomic total shoulder arthroplasty (aTSA) remains controversial. We studied the use of a stepped augmented glenoid component for management of Walch B2 and B3 glenoids and compared the radiographic and clinical outcomes at short-term follow-up with those achieved with a non-augmented component of the same design in Walch A1 glenoids.Methods: Ninety-two patients (42 A1, 29 B2, and 21 B3 glenoids) were prospectively followed after aTSA. Sequential 3-dimensional (3D) computed tomography (CT) imaging was performed preoperatively, within 3 months postoperatively with metal artifact reduction (MAR) to define implant position, and at a minimum of 2 years postoperatively with MAR. Scapular 3D registration with implant registration allowed 3D measurement of glenoid implant position, implant shift, and central peg osteolysis (CPO).Results: CPO with or without implant shift occurred in a higher percentage of B3 glenoids treated with the augmented glenoid component (29%) than A1 glenoids treated with a standard component (5%) (p = 0.028). There was no significant difference in the frequency of CPO between B2 glenoids with the augmented component (10%) and A1 glenoids with the standard component. There was no difference in postoperative glenoid component version and inclination between groups. B3 glenoids were associated with more component medialization relative to the premorbid joint line compared with A1 and B2 glenoids (p < 0.001).Conclusions: A stepped augmented glenoid component can restore premorbid glenoid anatomy in patients with asymmetric biconcave glenoid bone loss (Walch B2), with short-term clinical and radiographic results equivalent to those for patients without glenoid bone loss (Walch A1) treated with a non-augmented component. There is a greater risk of CPO in patients with moderate-to-severe B3 glenoid pathology with this stepped augmented glenoid component. Longer follow-up will help define the clinical implications of CPO over time.Level Of Evidence: Therapeutic Level II. See Instructions for Authors for a complete description of levels of evidence. [ABSTRACT FROM AUTHOR]

Background: The purpose of this study was to evaluate glenoid component position and radiolucency following anatomic total shoulder arthroplasty (TSA) using sequential 3-dimensional computed tomography (3D CT) analysis.Methods: In a series of 152 patients (42 Walch A1, 16 A2, 7 B1, 49 B2, 29 B3, 3 C1, 3 C2, and 3 D glenoids) undergoing anatomic TSA with a polyethylene glenoid component, sequential 3D CT analysis was performed preoperatively (CT1), early postoperatively (CT2), and at a minimum 2-year follow-up (CT3). Glenoid component shift was defined as a change in component version or inclination of ≥3° from CT2 to CT3. Glenoid component central anchor peg osteolysis (CPO) was assessed at CT3. Factors associated with glenoid component shift and CPO were evaluated.Results: Glenoid component shift occurred from CT2 to CT3 in 78 (51%) of the 152 patients. CPO was seen at CT3 in 19 (13%) of the 152 patients, including 15 (19%) of the 78 with component shift. Walch B2 glenoids with a standard component and glenoids with higher preoperative retroversion were associated with a higher rate of shift, but not of CPO. B3 glenoids with an augmented component and glenoids with greater preoperative joint-line medialization were associated with CPO, but not with shift. More glenoid component joint-line medialization from CT2 to CT3 was associated with higher rates of shift and CPO. A greater absolute change in glenoid component inclination from CT2 to CT3 and a combined absolute glenoid component version and inclination change from CT2 to CT3 were associated with CPO. Neither glenoid component shift nor CPO was associated with worse clinical outcomes.Conclusions: Postoperative 3D CT analysis demonstrated that glenoid component shift commonly occurs following anatomic TSA, with increased inclination the most common direction. Most (81%) of the patients with glenoid component shift did not develop CPO. Longer follow-up is needed to determine the relationships of glenoid component shift and CPO with loosening over time.Level Of Evidence: Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence. [ABSTRACT FROM AUTHOR]

Background: The primary objectives of this study were to evaluate the ability of a posteriorly stepped augmented glenoid component, used in patients with primary glenohumeral osteoarthritis with B2 or B3 glenoid morphology, to correct preoperative retroversion and humeral head subluxation and to identify factors associated with radiographic radiolucency and patient-reported clinical outcomes.Methods: We identified 71 shoulders with B2 or B3 glenoid morphology that underwent anatomic total shoulder arthroplasty with use of a posteriorly stepped augmented glenoid component and with a preoperative 3-dimensional computed tomography (3D-CT) scan and a minimum of 2 years of clinical and radiographic follow-up. The Penn Shoulder Score (PSS), shoulder range of motion, glenoid center-peg osteolysis, and postoperative version and humeral head subluxation were the main outcome variables of interest.Results: Follow-up was a median of 2.4 years (range, 1.9 to 5.7 years); the mean patient age at treatment was 65 ± 7 years (range, 51 to 80 years). PSS, range of motion, humeral head centering, and glenoid version were significantly improved among all patients (p < 0.0001). Patients with persistent posterior subluxation of the humeral head postoperatively had worse preoperative fatty infiltration of the teres minor and greater postoperative component retroversion (p < 0.05). Patients with center-peg osteolysis had more preoperative joint-line medialization and posterior glenoid bone loss (p < 0.05). Patients with more preoperative humeral head posterior subluxation had a lower PSS, adjusting for confounders (p < 0.05).Conclusions: Posteriorly stepped augmented glenoid components can improve pathologic retroversion and posterior subluxation of the humeral head in B2 and B3 glenoids, with significant improvements found in clinical outcome scores at a minimum of 2 years of follow-up in the vast majority of patients.Level Of Evidence: Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence. [ABSTRACT FROM AUTHOR]

Background: Glenoid morphology and rotator cuff muscle quality are important anatomic factors that can impact longevity of the glenoid component following total shoulder arthroplasty (TSA). We hypothesized that rotator cuff muscle fatty infiltration is associated with increased pathologic glenoid bone loss in glenohumeral osteoarthritis (OA).Methods: We retrospectively reviewed 190 preoperative computed tomography (CT) scans of 175 patients (mean age, 66 years; range, 44 to 90 years) who underwent TSA for the treatment of primary glenohumeral OA. Two-dimensional orthogonal CT images were reformatted in the plane of the scapula from 3-dimensional images. Pathologic joint-line medialization was defined with use of the glenoid vault model. Pathologic glenoid version was measured directly. Glenoid morphology was graded according to a modified Walch classification (subtypes A1, A2, B1, B2, B3, C1, and C2). Rotator cuff muscle fatty infiltration was assessed and assigned a Goutallier score on the sagittal CT slice just medial to the spinoglenoid notch for each muscle.Results: There was a significant difference in the Goutallier score for the supraspinatus, infraspinatus, and teres minor muscles between Walch subtypes (p ≤ 0.05). High-grade posterior rotator cuff muscle fatty infiltration was present in 55% (21) of 38 B3 glenoids compared with 8% (3) of 39 A1 glenoids. Increasing joint-line medialization was associated with increasing fatty infiltration of all rotator cuff muscles (p ≤ 0.05). Higher fatty infiltration of the infraspinatus, teres minor, and combined posterior rotator cuff muscles was associated with increasing glenoid retroversion (p ≤ 0.05). After controlling for joint-line medialization and retroversion, B3 glenoids were more likely to have fatty infiltration of the supraspinatus and infraspinatus muscles than B2 glenoids were.Conclusions: High-grade rotator cuff muscle fatty infiltration is associated with B3 glenoids, increased pathologic glenoid retroversion, and increased joint-line medialization. Additional studies are needed to determine the causal relationship between these muscle changes and glenoid wear, whether these muscle changes independently affect clinical and radiographic outcomes in anatomic TSA, and whether fatty infiltration can improve postoperatively with correction of pathologic version and/or joint-line restoration.Clinical Relevance: This study investigates the association between different patterns of glenoid bone loss and rotator cuff muscle fatty infiltration. Both factors have been shown to affect clinical outcome following TSA. [ABSTRACT FROM AUTHOR]

Background: Walch defined the pathologic characteristics of glenohumeral osteoarthritis on the basis of patterns of glenoid morphology and humeral head subluxation. However, it is unclear how pathologic changes evolve over time. The purpose of this study was to determine whether there are common patterns of pathologic progression based on the Walch classification in primary glenohumeral osteoarthritis and if glenoid bone-loss patterns correlate with rotator cuff fatty infiltration.Methods: A retrospective chart review identified 65 shoulders with glenohumeral osteoarthritis for which at least 2 computed tomography (CT) scans had been performed at least 24 months apart. The CT scans were classified using a modification of the Walch classification. The amount and location of glenoid bone loss were measured using a vault model, and rotator cuff fatty infiltration was calculated as a percentage of cross-sectional muscle area.Results: The initial CT scans showed 42 A-type glenoids and 23 B-type glenoids. CT scans made at an average (and standard deviation) of 74 ± 32 months after the initial scans showed that only 8 of the 42 A1 glenoids had evidence of pathologic progression (5 to A2 type and 3 to B type) whereas 17 of 19 B1 glenoids had progressed (15 to B2 and 2 to B3); this difference was significant on univariate and multivariate analysis (p < 0.001). The odds of joint line medialization occurring were 8.1 times higher (95% confidence interval [CI]: 2.1 to 31.4) for B-type glenoids than for A-type glenoids. Among the glenoids that underwent medialization, those classified as B-type showed more medialization over time (estimated change, 0.70 mm/year; p = 0.036), whereas no significant relationship between medialization and time was observed for A-type glenoids (estimated change, 0.013 mm/year; p = 0.95). The median percent fatty infiltration in the infraspinatus muscle was higher in association with B-type glenoids than in association with A-type glenoids on both the initial (14% versus 7%; p < 0.001) and the final follow-up (16% versus 10%; p = 0.003) CT scans.Conclusions: Asymmetric bone loss rarely develops in A1 glenoids, whereas initial posterior translation of the humeral head (B1 glenoids) may be associated with subsequent development and progression of posterior glenoid bone loss over time. Differences in fatty infiltration of the posterior aspect of the rotator cuff were seen between A-type and B-type glenoids, but the clinical relevance of this finding is currently unknown.Level Of Evidence: Prognostic Level III. See Instructions for Authors for a complete description of levels of evidence. [ABSTRACT FROM AUTHOR]

Background: Osteoarthritis of the glenohumeral joint has typical patterns of deformity as described by Walch et al. However, more severe glenoid pathology may be difficult to classify. The purpose of this study was to use 3-dimensional computed tomography (3-D CT) imaging analysis to define common pathologic subtypes that can be differentiated from the current Walch classification.Methods: We performed quantitative measurements of premorbid and pathologic anatomy using preoperative 3-D CT scans from 155 cases of advanced glenohumeral osteoarthritis that underwent anatomic or reverse total shoulder arthroplasty. We defined premorbid glenohumeral anatomy on the basis of previously validated methods using 3-D glenoid vault and humeral best-fit circle models including the premorbid glenoid version, joint-line medialization, and humeral-glenoid alignment (HGA). We determined the anatomic features that differentiate new glenoid morphologic subtypes from the existing Walch classification both qualitatively and quantitatively.Results: We defined 2 new glenoid subtypes (B3 and C2) for which the glenoid pathology and humeral alignment were not defined in the original Walch classification. The B3 glenoid has high pathologic retroversion, normal premorbid version, and acquired central and posterior bone loss that, on average, is greater than that of the B2 glenoid. The C2 glenoid is dysplastic with high pathologic retroversion, high premorbid version, and acquired posterior bone loss, giving it the appearance of a biconcave glenoid with posterior translation of the humeral head. This C2 glenoid can be confused with the B2 glenoid.Conclusions: The B3 and C2 patterns have qualitative and quantitative differences that may result in different clinical outcomes than classic B2 or C types; therefore, our findings suggest that these new subtypes should be included in a new or modified classification system. [ABSTRACT FROM AUTHOR]

Purpose: The role of reverse total shoulder arthroplasty (RTSA) for three and four-part proximal humerus fractures is evolving. However, there does not appear to be a clear consensus amongst surgeons. The purpose of this study is to further define the standard of care, assessing surgeon preference and treatment considerations for management of such fractures.Methods: Orthopaedic surgeons were surveyed on their training, practice setting, and experience regarding management of four-part proximal humerus fractures. The survey also presented five representative cases to assess treatment preferences.Results: Two hundred five surgeons responded to the survey with fellowship training in shoulder and elbow surgery (114), orthopaedic trauma (35) or sports medicine/other training (56). There was no difference between respondents with years in practice and confidence with performing RTSA, however, surgeons in the academic setting were more confident in performing the surgery. Surgeons preferred RTSA for management of four-part fractures in patients over age 65. However, they also trended to favour hemiarthroplasty with higher co-morbidities. Physicians with more than 11 years of experience were more likely to choose hemiarthroplasty for older and high comorbidity patients. RTSA was not the preferred treatment method for younger, active patients. Patient age and fracture pattern had a greater influence on the surgeon's decision.Conclusions: There is a consensus in our study population that RTSA is the preferred treatment for four-part proximal humerus fractures for elderly patients with patient age and fracture pattern being the most important factors in making management decisions.Level Of Evidence: Level III - Case controlled study. [ABSTRACT FROM AUTHOR]

BACKGROUND: Propionibacterium acnes is recognized as a pathogenic organism associated with periprosthetic joint infection following shoulder arthroplasty. The goal of our study was to determine the relationship between the time to P. acnes growth in culture and the likelihood of a culture result being a true positive versus a false positive based on the proportion of positive cultures and other perioperative findings in cases of revision shoulder arthroplasty. METHODS: We retrospectively reviewed forty-six cases with P. acnes-positive cultures among patients who underwent revision shoulder arthroplasty between May 2010 and October 2014. Tissue and fluid was cultured anaerobically for a mean (and standard deviation) of 13.1 ± 3 days. Cases were categorized into one of two groups for analysis: probable true positive or probable contaminant (false-positive) on the basis of culture results and perioperative findings. RESULTS: The time to P. acnes culture growth was significantly shorter (p = 0.002) in the probable true-positive culture group compared with the probable contaminant group (median of five days [interquartile range, four to seven days]) compared with nine days [interquartile range, six to twelve days]). Among the thirty-seven cases in the probable true-positive group, no culture result turned positive after eleven days, whereas in the probable contaminant group, cultures turned positive after this time point in 44% (four of nine) of the cases. There were also significantly fewer days to P. acnes culture growth among cases with a higher number of positive cultures (p = 0.001) and a higher proportion of positive cultures (p < 0.001), regardless of group classification. CONCLUSIONS: P. acnes is the most commonly identified organism following revision shoulder arthroplasty. The proportion of positive cultures and the timing of culture growth may help to distinguish a true-positive from a false-positive culture result. LEVEL OF EVIDENCE: Diagnostic Level III. See Instructions for Authors for a complete description of levels of evidence. [ABSTRACT FROM AUTHOR]

Background: This prospective multi-institutional study was designed to define the accuracy of ultrasonography, when performed in an orthopaedic surgeon's office, for the diagnosis of rotator cuff tears. Methods: An anatomic diagnosis and a treatment plan were made on the basis of office-based shoulder ultrasonography, physical examination, and radiographs for ninety-eight patients (ninety-nine shoulders) with a clinical diagnosis of a rotator-cuff-related problem. The results of the ultrasonographic studies were then compared with the results of magnetic resonance imaging and the operative findings. Results: Office-based ultrasonography led to the correct diagnosis for thirty-seven (88%) of forty-two shoulders with a full-thickness rotator cuff tear or both full and partial-thickness tears, twenty-six (70%) of thirty-seven shoulders with a partial-thickness rotator cuff tear only, and sixteen (80%) of twenty shoulders with normal tendons. In no case was the surgical approach (open or arthroscopic) that had been planned on the basis of the ultrasonography altered by the operative findings, but the operative finding of a full-thickness tear resulted in an arthroscopic cuff repair in four shoulders. Magnetic resonance imaging led to the correct diagnosis for forty (95%) of forty-two shoulders with a full-thickness rotator cuff tear or both full and partial-thickness rotator cuff tears, twenty-seven (73%) of thirty-seven shoulders with only a partial-thickness tear, and fifteen (75%) of twenty shoulders with normal tendons. There were no significant differences between magnetic resonance imaging and ultrasonography with regard to the correct identification of a full-thickness tear or its size. The sensitivity of ultrasonography for detecting tear size in the anteriorposterior dimension was 86% (95% confidence interval, 71% to 95%), and that of magnetic resonance imaging was 93% (95% confidence interval, 81% to 99%) (p = 0.26). The sensitivity of ultrasonography for detecting tear size in the medial-lateral dimension was 83% (95% confidence interval, 69% to 93%), and that of magnetic resonance imaging was 88% (95% confidence interval, 74% to 96%) (p = 0.41). Conclusions: A well-trained office staff and an experienced orthopaedic surgeon can effectively utilize ultrasonography, in conjunction with clinical examination and a review of shoulder radiographs, to accurately diagnose the extent of rotator cuff tears in patients suspected of having such tears. Errors in diagnosis made on the basis of ultrasonography most often consist of an inability to distinguish between partial and full-thickness tears that are approximately 1 cm in size. In this study, such errors did not significantly affect the planned surgical approach. Level of Evidence: Diagnostic Level I. See Instructions to Authors for a complete description of levels of evidence. [ABSTRACT FROM AUTHOR]