Search

This document is a guest editorial from the journal IET Generation, Transmission & Distribution. It discusses the use of artificial intelligence (AI) in reliable forecasting for energy sectors. The editorial highlights the challenges of integrating renewable energy sources and fluctuating electricity demand, and emphasizes the importance of accurate forecasting for system operators. The document also provides summaries of several papers included in a special issue on AI-empowered forecasting in energy sectors, covering topics such as load forecasting, wind power prediction, and control parameter optimization. The editorial concludes by recommending further research and practical implementations of AI approaches in the energy sectors. [Extracted from the article]

Featured Application: This paper presents a methodology for the implementation of edge intelligence for predicting solar panel performances on wireless sensor nodes. The importance of the usage of renewable energy sources in powering wireless sensor nodes in IoT and sensor networks grows together with the increasing number of utilized sensor nodes. Considering the other types of renewable energy sources, solar power differs as the most suitable one and emerges as the major source for powering sensor nodes. Thus, the consideration of using sensor nodes and collected sensor data for estimating solar panel performances and therefore solar power potential can improve the efforts in this direction. This paper presents the methodology for implementing edge intelligence on wireless sensor nodes for solar panel output voltage estimation and forecasting. The methodology covers the usage of the Python Scikit-learn package and micromlgen library for the implementation of edge intelligence on Arduino clone-based sensor nodes, particularly the development boards based on the ESP8266 chips. Scikit-learn is used for analyzing the efficiency of various regressors on collected solar data. The micromlgen library is then used for implementing those regressors on Arduino and clone nodes. The prediction of solar panel voltage generation is based on a single-sensor reading—UV or BH1750 light sensor. The Random Forest and Decision Tree regressors are implemented on the ESP8266-based development board—Wemos D1 R2. The estimation accuracy of the RF model is an MSE of approximately 0.10, MAE of 0.07 for UV and 0.04 for BH1750, and an R2 of approximately 0.93 for both UV and BH1750 light sensors. The Decision Tree model has a lower accuracy with an MSE between 0.13 and 0.14, MAE of 0.07 for UV and 0.04 for BH1750, and R2 of 0.90 and 0.89 for the UV and BH1750 sensors, respectively. The methodology and its efficiency are presented and discussed in this paper. [ABSTRACT FROM AUTHOR]

Power system protection and asset management present persistent technical challenges, particularly in the context of the smart grid and renewable energy sectors. This paper aims to address these challenges by providing a comprehensive assessment of machine learning applications for effective asset management in power systems. The study focuses on the increasing demand for energy production while maintaining environmental sustainability and efficiency. By harnessing the power of modern technologies such as artificial intelligence (AI), machine learning (ML), and deep learning (DL), this research explores how ML techniques can be leveraged as powerful tools for the power industry. By showcasing practical applications and success stories, this paper demonstrates the growing acceptance of machine learning as a significant technology for current and future business needs in the power sector. Additionally, the study examines the barriers and difficulties of large‐scale ML deployment in practical settings while exploring potential opportunities for these tactics. Through this overview, insights into the transformative potential of ML in shaping the future of power system asset management are provided. [ABSTRACT FROM AUTHOR]

The low carbon park islanded microgrid faces operational challenges due to the high variability and uncertainty of distributed renewable energy sources. These sources cause severe random disturbances that impair the frequency control performance and increase the regulation cost of the islanded microgrid, jeopardizing its safety and stability. This paper presents a data-driven intelligent load frequency control (DDI-LFC) method to address this problem. The method replaces the conventional LFC controller with an intelligent agent based on a deep reinforcement learning algorithm. To adapt to the complex islanded microgrid environment and achieve adaptive multi-objective optimal frequency control, this paper proposes the quantum-inspired maximum entropy actor-critic (QIS-MEAC) algorithm, which incorporates the quantum-inspired principle and the maximum entropy exploration strategy into the actor-critic algorithm. The algorithm transforms the experience into a quantum state and leverages the quantum features to improve the deep reinforcement learning's experience replay mechanism, enhancing the data efficiency and robustness of the algorithm and thus the quality of DDI-LFC. The validation on the Yongxing Island isolated microgrid model of China Southern Grid (CSG) demonstrates that the proposed method utilizes the frequency regulation potential of distributed generation, and reduces the frequency deviation and generation cost. [ABSTRACT FROM AUTHOR]

In recent years, various energy crisis and environmental considerations have prompted the use of renewable energy resources. Renewable energy resources like solar, wind, hydro, biomass, etc. have been a continuous source of clean energy. Wind energy is one of the renewable energy resources that has been widely used all over the world. The wind power is mainly dependent on wind speed which is a random variable and its unpredictable behavior creates various challenges for wind farm operators like energy dispatching and system scheduling. Hence, predicting wind power energy becomes crucial. This has led to the development of various forecasting models in the recent decades. The most commonly used deep learning algorithms for wind power prediction are- RNN (Recurrent Neural Network), LSTM (Long Short- Term Memory) and CNN (Convolutional Neural Network). This paper presents the working of these algorithms and provides a timeline review of the research papers that used these algorithms for wind power prediction. [ABSTRACT FROM AUTHOR]

An alternative energy source such as solar is one of the most important renewable resources. A reliable solar radiation prediction is essential for various applications in agriculture, industry, transport, and the environment because they reduce greenhouse gases and are environmentally friendly. Solar radiation data series have embedded fluctuations and noise signals due to complexity, stochasticity, non-stationarity, and nonlinearity with uncertain and time-varying nature. Aside from being highly nonlinear, solar radiation is highly influenced by the environment and environmental parameters such as air temperature, cloud cover, surface reflectivity, and aerosols. In addition, the spatial measurements of these variables are not readily available. To tackle these challenges, it is necessary to consider data preprocessing techniques and to develop and test precise solar radiation predicting models at different forecast horizons. There is, however, controversy regarding the performance of such models in various studies. Comparisons are not conducted systematically among the different studies. Using a critical literature review, the authors hope to answer these questions and believe that further investigation of solar radiation can benefit researchers and practitioners alike. This study presents a comprehensive evaluation of solar radiation modeling using artificial intelligence in the last 15 years and provides a novel detailed analysis of the available models. The studies conducted in different climates of the world that were published in distinguished journals were considered (i.e., 90 papers in total) for this purpose. Newly discovered procedures for optimizing forecasts, data cleaning, feature selection, classification methods, and stand-alone or hybrid data-driven models for solar radiation prediction and modeling were evaluated. The results strikingly showed that the most used artificial intelligence methods were artificial neural network, adaptive neuro-fuzzy inference system, and decision tree family of models. In addition, the extreme learning machine, support vector machine, and particle swarm optimization were the most used optimization techniques in solar radiation modeling. In terms of forecast horizons, the most common forecast horizon found in papers was on the daily scale (51% of studies), followed by the hourly scale (26%), and the least common was the monthly scale (18%). Based on the regional studies, the highest number of solar radiation papers originated from Asia, with Europe in second place and African countries in third place. An increasing trend in the number of papers from 2011 to 2015 was noted, and the second peak started from 2018 till the present. Under each section, a summary of findings is provided. The paper concludes with future thoughts and directions on solar radiation modeling. [ABSTRACT FROM AUTHOR]

This paper reviews renewable energy integration with the electrical power grid through the use of advanced solutions at the device and system level, using smart operation with better utilisation of design margins and power flow optimisation with machine learning. This paper first highlights the significance of credible temperature measurements for devices with advanced power flow management, particularly the use of advanced fibre optic sensing technology. The potential to expand renewable energy generation capacity, particularly of existing wind farms, by exploiting thermal design margins is then explored. Dynamic and adaptive optimal power flow models are subsequently reviewed for optimisation of resource utilisation and minimisation of operational risks. This paper suggests that system-level automation of these processes could improve power capacity exploitation and network stability economically and environmentally. Further research is needed to achieve these goals. [ABSTRACT FROM AUTHOR]

The integration of renewable energy sources (RES) into smart grids has been considered crucial for advancing towards a sustainable and resilient energy infrastructure. Their integration is vital for achieving energy sustainability among all clean energy sources, including wind, solar, and hydropower. This review paper provides a thoughtful analysis of the current status of the smart grid, focusing on integrating various RES, such as wind and solar, into the smart grid. This review highlights the significant role of RES in reducing greenhouse gas emissions and reducing traditional fossil fuel reliability, thereby contributing to environmental sustainability and empowering energy security. Moreover, key advancements in smart grid technologies, such as Advanced Metering Infrastructure (AMI), Distributed Control Systems (DCS), and Supervisory Control and Data Acquisition (SCADA) systems, are explored to clarify the related topics to the smart grid. The usage of various technologies enhances grid reliability, efficiency, and resilience are introduced. This paper also investigates the application of Machine Learning (ML) techniques in energy management optimization within smart grids with the usage of various optimization techniques. The findings emphasize the transformative impact of integrating RES and advanced smart grid technologies alongside the need for continued innovation and supportive policy frameworks to achieve a sustainable energy future. [ABSTRACT FROM AUTHOR]

In recent decades, Saudi Arabia has experienced a significant surge in energy consumption as a result of population growth and economic expansion. This has presented utility companies with the formidable challenge of upgrading their facilities and expanding their capacity to keep pace with future energy demands. In order to address this issue, there is an urgent need to implement energy-saving solutions such as energy storage systems (ESSs) and renewable energy sources, which can help to reduce demand during peak hours. To ensure optimal use of ESSs, it is crucial to integrate a load forecasting model with the ESS in order to control charging and discharging rates and schedules. The irregular load profile is a particularly significant consumer of energy, consuming approximately 2.5 GWh annually at the cost of USD 3 billion in Saudi Arabia. In light of this, this paper develops a load forecasting model for the irregular load profile with a high degree of accuracy: achieving 95%. One of the key applications of this model is load peak shaving. Given the region's abundance of solar irradiation, the paper propose an integration of a solar PV system with a battery energy storage system (BESS) and analyzes various scenarios to determine the efficacy of the proposed approach. The results demonstrate significant savings when the proposed forecasting model is integrated with a BESS and PV system, with the potential to reduce monthly imported power by more than 22% during the summer season. [ABSTRACT FROM AUTHOR]

The massive integration of distributed renewable energy sources and nonlinear power electronic equipment has given rise to power quality issues such as waveform distortion, voltage instability, and increased harmonic components. Nowadays, the pollution of power quality is becoming increasingly severe, posing a potential threat to the security of the power grid and the stable operation of electrical equipment. Due to the presence of significant noise interference in the collected signals, existing methods still face issues such as low accuracy in disturbance identification and high computational complexity. To address these problems, this paper proposes a hybrid data-driven strategy that can significantly improve the accuracy and speed of identification. Firstly, the wavelet packet transform (WPT) method is employed to denoise the power disturbance signals. Subsequently, the local mean decomposition (LMD) algorithm is used to adaptively decompose the nonlinear and complex time series into multiple product function components. Feature extraction of the disturbance signals is then achieved by calculating entropy values after local mean decomposition, and a feature matrix is constructed from the entropy values of each component for analysis in disturbance identification. Finally, an extreme learning machine (ELM) is employed for the identification and classification of transient power disturbance signals. The verification of numerical examples demonstrates the feasibility and effectiveness of the proposed method in this paper. [ABSTRACT FROM AUTHOR]

Renewable energy resources are the only solution to the energy crisis over the world. Production of energy by the solar panel cells are identified as the main renewable energy resources. The generation of energy by the solar panels is affected by the cracks on it. Hence, the detection of cracks is important to increase the energy levels produced by the solar cells. In this paper, the solar panel images are classified into either cracked image or non-cracked image using deep learning algorithm. The proposed method is designed with the following modules preprocessing, enhancement, feature computations, classification and crack segmentation. The source solar panel image are denoised using adaptive median filter as the preprocessing process and then the pixels in denoised solar panel image are enhanced using cumulative enhancement (CE) method. The external features are computed from the CE enhanced solar panel image and these features are classified by Improved AlexNet (IAN)-deep learning classifier to produce the classification results as either cracked or non-cracked solar panel image. Finally, the cracks in classified cracked solar panel image are segmented using morphological algorithm. The main significance of this paper is that the proposed methods stated here detect single and multiple level of minor cracks, which enhances the energy levels production. [ABSTRACT FROM AUTHOR]

As the penetration of renewable energy sources into a power system increases, the significance of precise short-term forecasts for wind power generation becomes paramount. However, the erratic and non-periodic nature of wind poses challenges in accurately predicting the output. This paper presents a comprehensive investigation into forecasting wind power generation for the following day, using three machine learning models: long short-term memory (LSTM), convolutional neural network-bidirectional LSTM (CNN-biLSTM), and light gradient boosting machine (LGBM). In addition, this paper proposes a method to improve the prediction performance of LGBM by separating data according to the distribution of features, and training and testing each separated dataset with a distinct model. This study includes a comparative analysis of the performance of the proposed models in predicting wind turbine output, offering valuable insights into their respective efficiencies. The results of this investigation were analyzed for two geographically distinct wind farms (Korea and the UK). The findings of this study are expected to facilitate the selection of efficient prediction models within the forecast accuracy auxiliary service market and assist grid operators in ensuring reliable power supply for the grid. [ABSTRACT FROM AUTHOR]

In the context of escalating energy demands and the quest for sustainable waste management solutions, this paper evaluates the efficacy of three machine learning methods—ElasticNet, Decision Trees, and Neural Networks—in predicting energy recovery from municipal waste across the European Union. As renewable energy sources increasingly dominate the energy production landscape, the integration of Waste-to-Energy (WTE) processes presents a dual advantage: enhancing waste management and contributing to the renewable energy mix. This study leverages a dataset incorporating economic and environmental indicators from 25 European countries, spanning 2013–2020, to compare the predictive capabilities of the three machine learning models. The analysis reveals that Neural Networks, with their intricate pattern recognition capabilities, outperform ElasticNet and Decision Trees in predicting energy recovery metrics, as evidenced by superior performance in key statistical indicators such as R-value, Mean Squared Error (MSE), and Mean Absolute Error (MAE). The comparative analysis not only demonstrates the effectiveness of each method but also suggests Neural Networks as a pivotal tool for informed decision-making in waste management and energy policy formulation. Through this investigation, the paper contributes to the sustainable energy and waste management discourse, emphasizing the critical intersection of advanced technologies, policy considerations, and environmental stewardship in addressing contemporary energy challenges. [ABSTRACT FROM AUTHOR]

This paper presents a cutting-edge Sustainable Power Management System for Light Electric Vehicles (LEVs) using a Hybrid Energy Storage Solution (HESS) integrated with Machine Learning (ML)-enhanced control. The system's central feature is its ability to harness renewable energy sources, such as Photovoltaic (PV) panels and supercapacitors, which overcome traditional battery-dependent constraints. The proposed control algorithm orchestrates power sharing among the battery, supercapacitor, and PV sources, optimizing the utilization of available renewable energy and ensuring stringent voltage regulation of the DC bus. Notably, the ML-based control ensures precise torque and speed regulation, resulting in significantly reduced torque ripple and transient response times. In practical terms, the system maintains the DC bus voltage within a mere 2.7% deviation from the nominal value under various operating conditions, a substantial improvement over existing systems. Furthermore, the supercapacitor excels at managing rapid variations in load power, while the battery adjusts smoothly to meet the demands. Simulation results confirm the system's robust performance. The HESS effectively maintains voltage stability, even under the most challenging conditions. Additionally, its torque response is exceptionally robust, with negligible steady-state torque ripple and fast transient response times. The system also handles speed reversal commands efficiently, a vital feature for real-world applications. By showcasing these capabilities, the paper lays the groundwork for a more sustainable and efficient future for LEVs, suggesting pathways for scalable and advanced electric mobility solutions. [ABSTRACT FROM AUTHOR]

Given the climate change in recent decades and the ever-increasing energy consumption in the building sector, research is widely focused on the green revolution and ecological transition of buildings. In this regard, artificial intelligence can be a precious tool to simulate and optimize building energy performance, as shown by a plethora of recent studies. Accordingly, this paper provides a review of more than 70 articles from recent years, i.e., mostly from 2018 to 2023, about the applications of machine/deep learning (ML/DL) in forecasting the energy performance of buildings and their simulation/control/optimization. This review was conducted using the SCOPUS database with the keywords "buildings", "energy", "machine learning" and "deep learning" and by selecting recent papers addressing the following applications: energy design/retrofit optimization, prediction, control/management of heating/cooling systems and of renewable source systems, and/or fault detection. Notably, this paper discusses the main differences between ML and DL techniques, showing examples of their use in building energy simulation/control/optimization. The main aim is to group the most frequent ML/DL techniques used in the field of building energy performance, highlighting the potentiality and limitations of each one, both fundamental aspects for future studies. The ML approaches considered are decision trees/random forest, naive Bayes, support vector machines, the Kriging method and artificial neural networks. The DL techniques investigated are convolutional and recursive neural networks, long short-term memory and gated recurrent units. Firstly, various ML/DL techniques are explained and divided based on their methodology. Secondly, grouping by the aforementioned applications occurs. It emerges that ML is mostly used in energy efficiency issues while DL in the management of renewable source systems. [ABSTRACT FROM AUTHOR]

Modern electrical power systems are characterized by a high rate of transient processes, the use of digital monitoring and control systems, and the accumulation of a large amount of technological information. The active integration of renewable energy sources contributes to reducing the inertia of power systems and changing the nature of transient processes. As a result, the effectiveness of emergency control systems decreases. Traditional emergency control systems operate based on the numerical analysis of power system dynamic models. This allows for finding the optimal set of preventive commands (solutions) in the form of disconnections of generating units, consumers, transmission lines, and other primary grid equipment. Thus, the steady-state or transient stability of a power system is provided. After the active integration of renewable sources into power systems, traditional emergency control algorithms became ineffective due to the time delay in finding the optimal set of control actions. Currently, machine learning algorithms are being developed that provide high performance and adaptability. This paper contains a meta-analysis of modern emergency control algorithms for power systems based on machine learning and synchronized phasor measurement data. It describes algorithms for determining disturbances in the power system, selecting control actions to maintain transient and steady-state stability, stability in voltage level, and limiting frequency. This study examines 53 studies piled on the development of a methodology for analyzing the stability of power systems based on ML algorithms. The analysis of the research is carried out in terms of accuracy, computational latency, and data used in training and testing. The most frequently used textual mathematical models of power systems are determined, and the most suitable ML algorithms for use in the operational control circuit of power systems in real time are determined. This paper also provides an analysis of the advantages and disadvantages of existing algorithms, as well as identifies areas for further research. [ABSTRACT FROM AUTHOR]

The penetration of renewable energy sources, electric vehicles (EVs) and load dynamics, and network complexities often lead to nuisance tripping in gridconnected microgrids. Traditional protection methods fail to discriminate fault and other dynamic volatilities in the system. The paper presents a novel twolevel adaptive relay algorithm to avoid nuisance tripping in a grid-connected microgrid under varying grid dynamics. The novelty of the adaptive relay algorithm is that nuisance tripping is eliminated by precisely determining normal system-level dynamics at the first level using a phase deviation reference block. The first level determines the necessity for activating the second level, which consists of a detection scheme combining a multiclass support vector machine (SVM) and discrete wavelet transform (DWT). The hybrid DWTSVM methodology ensures effective fault diagnosis, adapting to variations in energy sources, load fluctuations, and fault scenarios. Real-time hardware-in-the-loop (HIL) simulation validates the system's effectiveness in dynamic microgrid environments. Extensive experiments on scenarios, including faults, fluctuations in renewable energy generation, and intermittent simulations of EV charging and capacitor switching, were conducted to test the efficacy of the adaptive relay algorithm. Finally, experiments using OPAL-RT HIL realtime simulator and the Raspberry Pi microcontroller validated the adaptive relay algorithm in a grid-connected microgrid under varying grid dynamics. [ABSTRACT FROM AUTHOR]

This paper presents a comprehensive review of the most recent papers and research trends in the fields of wind energy and artificial intelligence. Our study aims to guide future research by identifying the potential application and research areas of artificial intelligence and machine learning techniques in the wind energy sector and the knowledge gaps in this field. Artificial intelligence techniques offer significant benefits and advantages in many sub‐areas, such as increasing the efficiency of wind energy facilities, estimating energy production, optimizing operation and maintenance, providing security and control, data analysis, and management. Our research focuses on studies indexed in the Web of Science library on wind energy between 2000 and 2023 using sub‐branches of artificial intelligence techniques such as artificial neural networks, other machine learning methods, data mining, fuzzy logic, meta‐heuristics, and statistical methods. In this way, current methods and techniques in the literature are examined to produce more efficient, sustainable, and reliable wind energy, and the findings are discussed for future studies. This comprehensive evaluation is designed to be helpful to academics and specialists interested in acquiring a current and broad perspective on the types of uses of artificial intelligence in wind energy and seeking what research subjects are needed in this field. [ABSTRACT FROM AUTHOR]

Recent research generally reports that the intermittent characteristics of sustainable energy sources pose great challenges to the efficiency and cost competitiveness of sustainable energy harvesting technologies. Hence, modern sustainable energy systems need to implement a stringent power management strategy to achieve the maximum possible green electricity production while reducing costs. Due to the above-mentioned characteristics of sustainable energy sources, power management systems have become increasingly sophisticated nowadays. For addressing the analysis, scheduling, and control problems of future sustainable power systems, conventional model-based methods are completely inefficient as they fail to handle irregular electric power disturbances in renewable energy generations. Consequently, with the advent of smart grids in recent years, power system operators have come to rely on smart metering and advanced sensing devices for collecting more extensive data. This, in turn, facilitates the application of advanced machine learning algorithms, which can ultimately cause the generation of useful information by learning from massive data without assumptions and simplifications in handling the most irregular operating behaviors of the power systems. This paper aims to explore various application objectives of some machine learning algorithms that primarily apply to wind energy conversion systems (WECSs). In addition, an enhanced proportional integral (PI) (2DoF) algorithm is particularly introduced and implemented in a doubly fed induction generator (DFIG)-based WECS to enhance the reliability of power production. The main contribution of this article is to leverage the superior qualities of the PI (2DoF) algorithm for enhanced performance, stability, and robustness of the WECS under uncertainties. Finally, the effectiveness of the study is demonstrated by developing a virtual reality in a MATLAB-Simulink environment. [ABSTRACT FROM AUTHOR]

The growing integration of renewable energy sources into grid-connected microgrids has created new challenges in power generation forecasting and energy management. This paper explores the use of advanced machine learning algorithms, specifically Support Vector Regression (SVR), to enhance the efficiency and reliability of these systems. The proposed SVR algorithm leverages comprehensive historical energy production data, detailed weather patterns, and dynamic grid conditions to accurately forecast power generation. Our model demonstrated significantly lower error metrics compared to traditional linear regression models, achieving a Mean Squared Error of 2.002 for solar PV and 3.059 for wind power forecasting. The Mean Absolute Error was reduced to 0.547 for solar PV and 0.825 for wind scenarios, and the Root Mean Squared Error (RMSE) was 1.415 for solar PV and 1.749 for wind power, showcasing the model's superior accuracy. Enhanced predictive accuracy directly contributes to optimized resource allocation, enabling more precise control of energy generation schedules and reducing the reliance on external power sources. The application of our SVR model resulted in an 8.4% reduction in overall operating costs, highlighting its effectiveness in improving energy management efficiency. Furthermore, the system's ability to predict fluctuations in energy output allowed for adaptive real-time energy management, reducing grid stress and enhancing system stability. This approach led to a 10% improvement in the balance between supply and demand, a 15% reduction in peak load demand, and a 12% increase in the utilization of renewable energy sources. Our approach enhances grid stability by better balancing supply and demand, mitigating the variability and intermittency of renewable energy sources. These advancements promote a more sustainable integration of renewable energy into the microgrid, contributing to a cleaner, more resilient, and efficient energy infrastructure. The findings of this research provide valuable insights into the development of intelligent energy systems capable of adapting to changing conditions, paving the way for future innovations in energy management. Additionally, this work underscores the potential of machine learning to revolutionize energy management practices by providing more accurate, reliable, and cost-effective solutions for integrating renewable energy into existing grid infrastructures. [ABSTRACT FROM AUTHOR]

The intermittent and stochastic nature of Renewable Energy Sources (RESs) necessitates accurate power production prediction for effective scheduling and grid management. This paper presents a comprehensive review conducted with reference to a pioneering, comprehensive, and data-driven framework proposed for solar Photovoltaic (PV) power generation prediction. The systematic and integrating framework comprises three main phases carried out by seven main comprehensive modules for addressing numerous practical difficulties of the prediction task: phase I handles the aspects related to data acquisition (module 1) and manipulation (module 2) in preparation for the development of the prediction scheme; phase II tackles the aspects associated with the development of the prediction model (module 3) and the assessment of its accuracy (module 4), including the quantification of the uncertainty (module 5); and phase III evolves towards enhancing the prediction accuracy by incorporating aspects of context change detection (module 6) and incremental learning when new data become available (module 7). This framework adeptly addresses all facets of solar PV power production prediction, bridging existing gaps and offering a comprehensive solution to inherent challenges. By seamlessly integrating these elements, our approach stands as a robust and versatile tool for enhancing the precision of solar PV power prediction in real-world applications. [ABSTRACT FROM AUTHOR]

There is a change in the traditional power system structure as a result of the increased incorporation of microgrids (MGs) into the grid. Multi‐area MGs will emerge as a result, and issues related to them will need to be addressed. Load frequency control (LFC) is a challenge in such structures, which are more complicated due to variations in demand and the stochastic characteristics of renewable energy sources. This paper presents a cascade fuzzy active disturbance rejection control technique to deal with the LFC problem. In order to tune different parameters of controllers, a newly developed heuristic algorithm called the Gazelle optimization algorithm (GOA) is also employed. Moreover, due to the fact that multi‐area MGs are regarded as cyber‐physical systems (CPSs), a relatively new concern for LFC problems is their resilience to cyberattacks such as false data injection (FDI) and denial of service (DoS) attacks. Therefore, this research also presents a novel machine learning approach called parallel attack resilience detection system (PARDS) to deal with the LFC problem in the presence of cyberattacks. The efficiency of the proposed strategy is investigated under different scenarios, such as non‐linearities in the power system or server cyberattacks. [ABSTRACT FROM AUTHOR]

Energy has an effective role in economic growth and development of societies. This paper is studying the impact of climate factors on performance of solar power plant using machine learning techniques for underlying relationship among factors that impact solar energy production and for forecasting monthly energy production. In this context this work provides two machine learning methods: ANN for forecasting energy production and decision tree useful in understanding the relationships in energy production data. Both structures have horizontal irradiation, sunlight duration, average monthly air temperature, average maximal air temperature, average minimal air temperature and average monthly wind speed as inputs parameters and the energy production as output. Results have shown that used machine learning models perform effectively, ANN predicted the energy production of the PV power plant with a correlation coefficient higher than 0.97. The results can help stakeholders in determining energy policy planning in order to overcome uncertainties associated with renewable energy resources. [ABSTRACT FROM AUTHOR]

A previously conducted study has developed a comprehensive framework that combines Machine Learning techniques and environmental assessment to facilitate decision-making in Process System Engineering (Prioux et al., 2023). This framework consists of five distinct steps: goal and scope definition, data architecture establishment, sustainability assessment, data visualization and result analysis, and the final decision-making process. The data architecture itself is directly influenced by the construction of big data architecture and comprises five sub-steps: (i) data collection and extraction from Knowledge Engineering, (ii) data enrichment and storage facilitated by Process Engineering and Machine Learning (ML), (iii) data cleaning, (iv) analysis of (raw) data, and (v) visualization of (raw) data. In the third step, environmental impacts are calculated, while the fourth step involves the utilization of ML tools for analyzing and visualizing the obtained results. To evaluate the efficacy of this approach, a comparison of various biomass pretreatment processes for glucose production was conducted. The primary objective of this study is to examine the steps of data enrichment and data cleaning in detail. To obtain relevant scientific articles, a targeted search using specific keywords was conducted on platforms such as Science Direct and Web of Science. However, it was observed that the data quality among these articles is inconsistent, with the presence of potential inconsistencies. Leveraging Machine Learning (ML) techniques enables us to enhance the quality of the data. This research paper seeks to emphasize the significance of ML, particularly neural network tools, in the context of environmental assessments within the realm of Big Data. The key focal points of our approach encompass enriching data from literature sources to simulate processes and identifying outliers within the extracted data. [ABSTRACT FROM AUTHOR]

The adoption of renewable energy sources, particularly wind energy, has seen remarkable growth in recent years. Wind energy generation requires efficient and reliable generators that can convert wind energy into usable electrical energy. Switched Reluctance Generators (SRGs) have been gaining popularity in wind energy applications due to their high efficiency, reliability, and low maintenance requirements. The multiphase switched reluctance generators are used especially in wind power plants due to their ability to operate in variable speed ranges. In this paper, a MATLAB/SIMULINK based model of Switched Reluctance Generator (SRG) is presented. The obtained results show good agreement under different operating conditions. The obtained results (current, voltage, torque, speed, flux, and angle of generator) are shown in graphs. [ABSTRACT FROM AUTHOR]

This paper presents an extensive review of the most effective and modern monitoring methods for electrical power lines, with particular attention to high-voltage (HV) and medium-voltage (MV) systems. From a general point of view, the main objective of these techniques is to prevent catastrophic failures by detecting the partial damage or deterioration of components and allowing maintenance operations to be organized. In fact, the protection devices commonly used in transmission and distribution networks guarantee the location of faults, such as short-circuits, putting the non-functioning branch of the network out of service. Nowadays, alongside these devices, it is possible to introduce new intelligent algorithms capable of avoiding the total loss of functionality, thus improving the reliability of the entire network. This is one of the main challenges in modern smart grids, which are characterized by the massive integration of renewable energy sources and a high level of complexity. Therefore, in the first part of this paper, a general overview of the most common protection devices is proposed, followed by an analysis of the most modern prevention algorithms. In the first case, the coordination of the relays plays a fundamental role in obtaining the fault location with a high level of selectivity, while in the field of preventive analysis, it is necessary to address the implementation of artificial intelligence methods. The techniques presented in this paper provide a comprehensive description of the different monitoring approaches currently used in distribution and transmission lines, highlighting the coordination of protection relays, the computational algorithms capable of preventing failures, and the influence of the distributed generation in their management. Therefore, this paper offers an overview of the main diagnostic techniques and protection devices, highlights the critical issues that can be overcome through the introduction of artificial intelligence, and describes the main prognostic methods, focusing on their invasive level and the possibility of operating directly online. This work also highlights the main guidelines for the classification and choice between the different approaches. [ABSTRACT FROM AUTHOR]

Auctions are increasingly used to support renewable energy sources (RES). The choice of the remuneration scheme is one of the major design challenges policymakers face. This paper analyzes the effects of remuneration schemes on RES auctions' success in markets with imperfect competition. I develop a game-theoretical auction/operation framework to model the feedback effects between the spot market's strategic behavior and the auction stage's bidding behavior. The analysis indicates that policymakers concerned about true-cost bidding, allocative efficiency, spot price, total payments to RES, and non-realization risk may prefer feed-in-tariff (FIT) remuneration. However, feed-in-premium (FIP) remunerations may outperform FIT ones from a social welfare perspective, particularly in markets with dirty technologies at the margin. A machine-learning-based simulation strategy is also presented, indicating that, for an auction for 14 GW of onshore wind in France, FIP auction with a winning incumbent leads to 1.40% higher prices than FIT ones. [ABSTRACT FROM AUTHOR]

Socioeconomic growth and population increase are driving a constant global demand for energy. Renewable energy is emerging as a leading solution to minimise the use of fossil fuels. However, renewable resources are characterised by significant intermittency and unpredictability, which impact their energy production and integration into the power grid. Forecasting models are increasingly being developed to address these challenges and have become crucial as renewable energy sources are integrated in energy systems. In this paper, a comparative analysis of forecasting methods for renewable energy production is developed, focusing on photovoltaic and wind power. A review of state-of-the-art techniques is conducted to synthesise and categorise different forecasting models, taking into account climatic variables, optimisation algorithms, pre-processing techniques, and various forecasting horizons. By integrating diverse techniques such as optimisation algorithms and pre-processing methods and carefully selecting the forecast horizon, it is possible to highlight the accuracy and stability of forecasts. Overall, the ongoing development and refinement of forecasting methods are crucial to achieve a sustainable and reliable energy future. [ABSTRACT FROM AUTHOR]

Renewable energy is a promising solution to combat the scarcity of electricity, particularly in isolated and rural areas. Microgrids (MG) can be employed for installing systems with different energy sources, such as renewable energy components and conventional energy sources like utility grids or grid-connected inverter systems. The amount of energy produced by renewable sources depends on their location, which has implications for energy production. This research aims to explore MG and their challenges for efficient operation. The study discusses various AI models used by researchers to mitigate problems associated with MG planning. Additionally, the paper presents a case study based on the most beneficial ML tool like clustering to gain insights into an existing MG system. The paper also delves into the issues related to PV, a connected distributed energy resource (DER), such as forecasting, and predictive management to reduce maintenance costs, and how AI tools can address them. Furthermore, forecasting methods such as LSTM and GRU models are discussed because of the stochastic nature of PV production. [ABSTRACT FROM AUTHOR]

This paper introduces a shape‐based inflow scenarios reduction framework applied in long‐term hydro‐thermal scheduling. This scheduling problem involves strategically managing the limited stored hydro energy in coordination with the electricity system. The scenario fan problem, selected as a long‐term hydro‐thermal scheduling approach, can effectively represent the individual hydropower plants and their short‐term flexibility within the long‐term scheduling process, making it well‐suited for capturing the disaggregated physical characteristics of hydro stations. However, the computational burden of scenario fan problem increases due to the complexity of the cascaded system and the large number of inflow scenarios. To tackle these challenges, a machine learning clustering method is developed for extracting shape‐based features to capture the energy and shape attributes of hydro inflows. A comparative analysis was conducted to evaluate the effectiveness of the proposed method, comparing it with four established clustering methods. This evaluation was carried out on a hydro‐thermal test case, utilizing both in‐sample and out‐of‐sample data analysis. The findings demonstrate that the proposed framework outperforms other methods in terms of computational time by 42.6% and optimal reservoir trajectories by 12.1% considering K‐means using Euclidean distance as the benchmark. Additionally, this study showcases the feasibility of performing long‐term hydro‐thermal scheduling at a granular level, with detailed topological information and a shorter time scale. This expanded approach opens up new possibilities for addressing the integration of renewable energy resources within the realm of long‐term hydro‐thermal scheduling. [ABSTRACT FROM AUTHOR]

The ever-increasing demand for electricity has presented a grave threat to traditional energy sources, which are finite, rapidly depleting, and have a detrimental environmental impact. These shortcomings of conventional energy resources have caused the globe to switch from traditional to renewable energy sources. Wind power significantly contributes to carbon-free energy because it is widely accessible, inexpensive, and produces no harmful emissions. Better and more efficient renewable wind power production relies on accurate wind speed predictions. Accurate short-term wind speed forecasting is essential for effectively handling unsteady wind power generation and ensuring that wind turbines operate safely. The significant stochastic nature of the wind speed and its dynamic unpredictability makes it difficult to forecast. This paper develops a hybrid model, L-LG-S, for precise short-term wind speed forecasting to address problems in wind speed forecasting. In this research, state-of-the-art machine learning and deep learning algorithms employed in wind speed forecasting are compared with the proposed approach. The effectiveness of the proposed hybrid model is tested using real-world wind speed data from a wind turbine located in the city of Karachi, Pakistan. Moreover, the mean square error (MSE), root mean square error (RMSE), and mean absolute error (MAE) are used as accuracy evaluation indices. Experimental results show that the proposed model outperforms the state-of-the-art legacy models in terms of accuracy for short-term wind speed in training, validation and test predictions by 98% respectively. [ABSTRACT FROM AUTHOR]

The economic operation of hydropower stations has the potential to increase water use efficiency. However, there are some challenges, such as the fixed and unchangeable flow characteristic curve of the hydraulic turbines, and the large number of variables in optimal load distribution, which limit the progress of research. In this paper, we propose a new optimal method of the economic operation of hydropower stations based on improved Long Short-Term Memory neural network (I-LSTM) and Random Forest (RF) algorithm. Firstly, in order to accurately estimate the water consumption, the LSTM model's hyperparameters are optimized using improved particle swarm optimization, and the I-LSTM method is proposed to fit the flow characteristic curve of the hydraulic turbines. Secondly, the Random Forest machine learning algorithm is introduced to establish a load-distribution model with its powerful feature extraction and learning ability. To improve the accuracy of the load-distribution model, we use the K-means algorithm to cluster the historical data and optimize the parameters of the Random Forest model. A Hydropower Station in China is selected for a case study. It is shown that (1) the I-LSTM method fits the operating characteristics under various working conditions and actual operating characteristics of hydraulic turbines, ensuring that they are closest to the actual operating state; (2) the I-LSTM method is compared with Support Vector Machine (SVM), Extreme Learning Machine (ELM) and Long Short-Term Memory neural network (LSTM). The prediction results of SVM have a large error, but compared with ELM and LSTM, MSE is reduced by about 46% and 38% respectively. MAE is reduced by about 25% and 21%, respectively. RMSE is reduced by about 27% and 24%, respectively; (3) the RF algorithm performs better than the traditional dynamic programming algorithm in load distribution. With the passage of time and the increase in training samples, the prediction accuracy of the Random Forest model has steadily improved, which helps to achieve optimal operation of the units, reducing their average total water consumption by 1.24%. This study provides strong support for the application of intelligent low-consumption optimization strategies in hydropower fields, which can bring higher economic benefits and resource savings to renewable energy production. [ABSTRACT FROM AUTHOR]

Bearing in mind European Green Deal assumptions regarding a significant reduction of green house emissions, electricity generation from Renewable Energy Sources (RES) is more and more important nowadays. Besides this, accurate and reliable electricity generation forecasts from RES are needed for capacity planning, scheduling, managing inertia and frequency response during contingency events. The recent three years have proved that Machine Learning (ML) models are a promising solution for forecasting electricity generation from RES. In this review, the 8-step methodology was used to find and analyze 262 relevant research articles from the Scopus database. Statistic analysis based on eight criteria (ML method used, renewable energy source involved, affiliation location, hybrid model proposed, short term prediction, author name, number of citations, and journal title) was shown. The results indicate that (1) Extreme Learning Machine and ensemble methods were the most popular methods used for electricity generation forecasting from RES in the last three years (2020–2022), (2) most of the research was carried out for wind systems, (3) the hybrid models accounted for about a third of the analyzed works, (4) most of the articles concerned short-term models, (5) the most researchers came from China, (6) and the journal which published the most papers in the analyzed field was Energies. Moreover, strengths, weaknesses, opportunities, and threats for the analyzed ML forecasting models were identified and presented in this paper. [ABSTRACT FROM AUTHOR]

This paper investigates biomass and solar energy's present and future perspectives in low/zero energy and carbon emissions. Its data source is published articles indexed in the Scopus database. By analyzing the articles extracted in Vos viewer software, four main areas of research are found: sustainable development, economic and managerial issues, methods, algorithms, modeling technologies, and renewable energy and its sources and types. In all four sections, research gaps were observed in the field of the third generation of photovoltaics (semi-transparent solar cells)organic)) and algae. As part of the study, advanced bibliometric analysis was carried out by VOS viewer software, and 34129 articles were examined from Scopus, alongside a patent analysis using Google patents, in addition to the bibliometric analysis. It has been shown by machine learning that about 9% of future articles in all energy fields will consist of building articles, and a quarter of these articles will be in the field of renewable energy. While residential and commercial sectors are the dominant areas of renewable energy utilization and commercialization research, the potential of new generations of renewable energy technologies will create significant opportunities to achieve low/zero energy-carbon emission buildings. The paper concludes by predicting the increasing rate of renewable energy and building articles compared to energy articles by 2030, emphasizing the critical role of research in advancing sustainable energy solutions. This data mining analysis helps to identify the current gaps and opportunities. Therefore, great potential will be created to develop and commercialize a new generation of technologies in this industry. [ABSTRACT FROM AUTHOR]

Accurately determining load model parameters is of the utmost importance for conducting power system simulation analysis and designing effective control strategies. Measurement-based approaches are commonly employed to identify load model parameters that closely reflect the actual operating conditions. However, these methods typically rely on iterative parameter search processes, which can be time-consuming, particularly when dealing with complex models. To address this challenge, this paper introduces a parameter identification method for the generalized synthetic load model (SLM) using the Extreme Learning Machine (ELM) technique, with the aim of enhancing computational efficiency. Furthermore, to achieve better alignment with load response curves, a Quantum Particle Swarm Optimization (QPSO) algorithm is adopted to train the ELM model. The proposed QPSO-ELM-based SLM parameter identification method is subsequently evaluated using a standard test system. To assess its effectiveness, parameter sensitivity analysis is performed, and simulation results are analyzed. The findings demonstrate that the proposed method yields favorable outcomes, offering improved computation efficiency in load model parameter identification tasks. [ABSTRACT FROM AUTHOR]

Solar power systems, such as photovoltaic (PV) systems, have become a necessary feature of zero-energy buildings because efficient building design and construction materials alone are not sufficient to meet the building's energy consumption needs. However, solar power generation is subject to fluctuations based on weather conditions, and these fluctuations are higher than other renewable energy sources. This phenomenon has emphasized the importance of predicting solar power generation through weather forecasting. In this paper, an Automatic Machine Learning (AML)-based method is proposed to create multiple prediction models based on solar power generation and weather data. Then, the best model to predict daily solar power generation is selected from these models. The solar power generation data used in this study was obtained from an actual solar system installed in a zero-energy building, while the weather data was obtained from open data provided by the Korea Meteorological Administration. In addition, To verify the validity of the proposed method, an ideal data model with high accuracy but difficult to apply to the actual system and a comparison model with a relatively low accuracy but suitable for application to the actual system were created. The performance was compared with the model created by the proposed method. Based on the validation process, the proposed approach shows 5–10% higher prediction accuracies compared to the comparison model. [ABSTRACT FROM AUTHOR]

Renewable energy sources are widely installed across countries. In recent years, the capacity of the installed renewable network supports large percentage of the required electrical loads. The relying on renewable energy sources to support the required electrical loads could have a catastrophic impact on the network stability under sudden change in weather conditions. Also, the recent deployment of fast charging stations for electric vehicles adds additional load burden on the electrical work. The fast charging stations require large amount of power for short period. This major increase in power load with the presence of renewable energy generation, increases the risk of power failure/outage due to overload scenarios. To mitigate the issue, the paper introduces the machine learning roles to ensure network stability and reliability always maintained. The paper contains valuable information on the data collection devises within the power network, how these data can be used to ensure system stability. The paper introduces the architect for the machine learning algorithm to monitor and manage the installed renewable energy sources and fast charging stations for optimum power grid network stability. Case study is included. [ABSTRACT FROM AUTHOR]

Using recent information and communication technologies for monitoring and management initiates a revolution in the smart grid. These technologies generate massive data that can only be processed using big data tools. This paper emphasizes the role of big data in resolving load forecasting, renewable energy sources integration, and demand response as significant aspects of smart grids. Meters data from the Low Carbon London Project is investigated as a case study. Because of the immense stream of meters' readings and exogenous data added to load forecasting models, addressing the problem is in the context of big data. Descriptive analytics are developed using Spark SQL to get insights regarding household energy consumption. Spark MLlib is utilized for predictive analytics by building scalable machine learning models accommodating meters' data streams. Multivariate polynomial regression and decision tree models are preferred here based on the big data point of view and the literature that ensures they are accurate and interpretable. The results confirmed the descriptive analytics and data visualization capabilities to provide valuable insights, guide the feature selection process, and enhance load forecasting models' accuracy. Accordingly, proper evaluation of demand response programs and integration of renewable energy resources is accomplished using achieved load forecasting results. [ABSTRACT FROM AUTHOR]

The paper presents research, the purpose of which is to define a machine learning model for express analysis of network traffic in a distributed computer system for managing decentralized generation facilities based on renewable energy. The available tools for monitoring processes in the computer network are considered. The problem of network traffic anomaly detection is presented as a binary classification problem. The input data of the model is represented by 10 features, which are determined on the basis of the RFE method based on the results of computational experiments on classification based on the examples of the Network Intrusion Detection dataset. To determine the optimal model, both neural network models: MLP, RNN, LSTM, and traditional machine learning models: KNN, Logistic Regression, Decision Tree, GBM were investigated. Implementations of these models from Scikit-learn and TensorFlow resources were configured and trained. According to the results of computational experiments, the most accurate models for detecting network traffic anomalies in a distributed computer system were determined: LSTM (F1 score: 0.97 on the test sample, 0.95 - in working mode) and RNN (F1 score: 0.97 on the test sample, 0.94 - in working mode). Tests have shown that RNN or LSTM anomaly prediction when transmitting a packet does not change the time order relative to transmission without prediction. The use of defined machine learning models to build subsystems for detecting network traffic anomalies in systems of distributed generation of electric energy based on renewable sources will allow to increase resistance to failures and force majeure situations, the efficiency of their work, especially taking into account the challenges to the operation of the energy system of Ukraine during the war. [ABSTRACT FROM AUTHOR]

The electricity market is constantly evolving, being driven by factors such as market liberalization, the increasing use of renewable energy sources (RESs), and various economic and political influences. These dynamics make it challenging to predict wholesale electricity prices. Accurate short-term forecasting is crucial to maintaining system balance and addressing anomalies such as negative prices and deviations from predictions. This paper investigates short-term electricity price forecasting using historical time series data and employs advanced deep learning algorithms. First, four deep learning models are implemented and proposed, which are a convolutional neural network (CNN) with an integrated attention mechanism, a hybrid CNN followed by a gated recurrent unit model (CNN-GRU) with an attention mechanism, and two ensemble learning models, which are a soft voting ensemble and a stacking ensemble model. Also, the optimized version of a transformer model, the Multi-Head Attention model, is introduced. Finally, the perceptron model is used as a benchmark for comparison. Our results show excellent prediction accuracy, particularly in the hybrid CNN-GRU model with attention, thereby achieving a mean absolute percentage error (MAPE) of 6.333%. The soft voting ensemble model and the Multi-Head Attention model also performed well, with MAPEs of 6.125% and 6.889%, respectively. These findings are significant, as previous studies have not shown high performance with transformer models and attention mechanisms. The presented results offer promising insights for future research in this field. [ABSTRACT FROM AUTHOR]

It is crucial to evaluate and anticipate stability under various conditions, as the ability to stabilize a smart grid (SG) is one of its key features for assessing the effectiveness of its design. Intelligent approaches to stability forecasting are necessary to mitigate inadvertent instability in SG design. This is particularly crucial with the expansion of residential and commercial infrastructures, along with the growing integration of renewable energies into these grids. Predicting the stability of SGs is currently a major challenge. The concept of an SG encompasses a broad range of emerging technologies in which artificial intelligence (AI) plays a crucial role and is increasingly being utilized in light of the limitations of conventional methods. It empowers informed decision-making and adaptable responses to fluctuations in customer energy needs, unexpected power outages, rapid changes in renewable energy generation, or any unforeseen crises within an SG system. In this paper, we propose a symmetric approach to enhance SG stability by integrating various machine learning (ML) and deep learning (DL) algorithms, where symmetry is observed in the balanced application of these diverse computational techniques to predict and ensure the grid's stability. These algorithms utilized a dataset containing the simulation results of the SG stability. The learning phase of these algorithms is based on imprecise and unreliable data. To overcome this limitation, the fusion of classifiers can be a powerful approach to modeling inaccurate and uncertain data, providing more robust and reliable predictions than individual classifiers. Voting and Dempster–Shafer (DS) methods, two commonly used techniques in ensemble learning, were employed and compared. The results show that the use of the fusion of distinct classifiers with voting theory achieves an accuracy of 99.8% and outperforms several other methods including the DS method. [ABSTRACT FROM AUTHOR]

Wind energy is one of the most significant renewable sources of energy while accurate and reliable wind power forecasting methods may greatly benefit power system planning and scheduling. Recently, many machine learning algorithms have shown significant advantages in how to extract temporal features for wind power forecasting. However, wind power curves in the time domain frequently display intermittent features and significant uncertainty, which is not favorable to precise and reliable forecasting. In this paper, the Diffusion and Channel Attention‐based Wind Power Forecasting (DC‐WPF) framework is proposed, which transforms wind power data into the frequency domain while applying advanced channel attention techniques to aid the model in capturing the frequency domain information and ultimately enhancing accuracy. With high‐accuracy results, DC‐WPF then proposes a diffusion‐based framework to transform the point forecasting results into probabilistic forecasts to capture the uncertainty. Finally, extensive experiments on six wind power plants show that our method can improve the point forecasting accuracy of wind power and provide advanced probabilistic forecasts at a multi‐time scale. [ABSTRACT FROM AUTHOR]

Recently, wind energy has been utilized globally as a renewable, sustainable, and eco-friendly energy source. However, wind energy's unpredictable and stochastic nature influences its entry into the national electrical grid. An effective wind speed prediction is required to meet these challenges. In this article, the Nonlinear Autoregressive Neural Network (NARNN) model is used and investigated for short-term wind speed forecasting by taking a dataset from the Kandıra wind farm in Kocaeli- Türkiye. The crux of the paper is to improve the actual application of the existing NARNN model with factual data using a different number of neurons of the hidden layer, delays, and training functions in the learning phase called the model's hyperparameters. The mean squared error (MSE) and determination coefficient (R2) are used as performance measures. As a result, the hyperparameter optimization for wind speed prediction using the NARNN increased the forecasting performance. Suggested NARNN model is compared with its exogenous version (NARXNN) using three extra inputs. It is observed that NARNN is not falling behind NARXNN because they provide close results, and NARNN has been shorter to run. Likewise, the learning algorithms were also compared, and it turned out that Bayesian Regularization (BR) is the best learning algorithm. Still, Levenberg Marquardt (LM) algorithm is much faster to execute and provides close results to BR. [ABSTRACT FROM AUTHOR]

Renewable energy is now in high demand due to the deterioration of the global climate and the depletion of conventional sources. Renewable energy sources (RES) such as wind and solar are extremely intermittent, making it impossible to sustain system reliability with an unacceptably high proportion of renewable energy injection. An intrinsic attribute common to all renewable power plants is that the production of energy relies on environmental conditions such as temperature, pressure, wind speed, humidity, clouds, etc. Therefore, the power from RES cannot be completely regulated or pre-planned. It is important to forecast the amount of electricity that can be produced in a power grid for future demand. Machine learning (ML) is an emerging technology and used in all fields nowadays to perform different tasks. In this paper, the applications of machine learning in renewable energy sources are discussed. These ML techniques are mainly used to predict the power from renewable energy sources like wind, solar, hydro, biomass, tidal, and geothermal. Fault detection is a significant aspect in renewable energy systems to reduce the operation and maintenance cost and to deliver the continuous power to the loads. This paper also focusses on the use of ML techniques in predicting the faults before it occurs, early detection of faults and also to diagnose the faults in renewable energy systems. Along with the above-mentioned applications, these ML techniques used in RES for different purposes are also discussed. [ABSTRACT FROM AUTHOR]

With the rise in electricity, gas and oil prices and the persistently high levels of carbon emissions, there is an increasing demand for effective energy management in energy systems, including electrical grids. Recent literature exhibits large potential for optimizing the behavior of such systems towards energy performance, reducing peak loads and exploiting environmentally friendly ways for energy production. However, the primary challenge relies on the optimization of such systems, which introduces significant complexities since they present quite dynamic behavior. Such cyberphysical frameworks usually integrate multiple interconnected components such as power plants, transmission lines, distribution networks and various types of energy-storage systems, while the behavior of these components is affected by various external factors such as user individual requirements, weather conditions, energy demand and market prices. Consequently, traditional optimal control approaches—such as Rule-Based Control (RBC)—prove inadequate to deal with the diverse dynamics which define the behavior of such complicated frameworks. Moreover, even sophisticated techniques—such as Model Predictive Control (MPC)—showcase model-related limitations that hinder the applicability of an optimal control scheme. To this end, AI model-free techniques such as Reinforcement Learning (RL) offer a fruitful potential for embedding efficient optimal control in cases of energy systems. Recent studies present promising results in various fields of engineering, indicating that RL frameworks may prove the key element for delivering efficient optimal control in smart buildings, electric vehicle charging and smart grid applications. The current paper provides a comprehensive review of RL implementations in energy systems frameworks—such as Renewable Energy Sources (RESs), Building Energy-Management Systems (BEMSs) and Electric Vehicle Charging Stations (EVCSs)—illustrating the benefits and the opportunities of such approaches. The work examines more than 80 highly cited papers focusing on recent RL research applications—between 2015 and 2023—and analyzes the model-free RL potential as regards the energy systems' control optimization in the future. [ABSTRACT FROM AUTHOR]

This study examines the research climate on machine learning applications in renewable energy (MLARE). Therefore, the publication trends (PT) and bibliometric analysis (BA) on MLARE research published and indexed in the Elsevier Scopus database between 2012 and 2021 were examined. The PT was adopted to deduce the major stakeholders, top-cited publications, and funding organizations on MLARE, whereas BA elucidated critical insights into the research landscape, scientific developments, and technological growth. The PT revealed 1218 published documents comprising 46.9% articles, 39.7% conference papers, and 6.0% reviews on the topic. Subject area analysis revealed MLARE research spans the areas of science, technology, engineering, and mathematics among others, which indicates it is a broad, multidisciplinary, and impactful research topic. The most prolific researcher, affiliations, country, and funder are Ravinesh C. Deo, National Renewable Energy Laboratory, United States, and the National Natural Science Foundation of China, respectively. The most prominent journals on the top are Applied Energy and Energies, which indicates that journal reputation and open access are critical considerations for the author's choice of publication outlet. The high productivity of the major stakeholders in MLARE is due to collaborations and research funding support. The keyword co-occurrence analysis identified four (4) clusters or thematic areas on MLARE, which broadly describe the systems, technologies, tools/technologies, and socio-technical dynamics of MLARE research. Overall, the study showed that ML is critical to the prediction, operation, and optimization of renewable energy technologies (RET) along with the design and development of RE-related materials. [ABSTRACT FROM AUTHOR]

The use of base station (BS) sleep modes is one of the most studied approaches for the reduction of the energy consumption of radio access networks (RANs). Many papers have shown that the potential energy saving of sleep modes is huge, provided the future behavior of the RAN traffic load is known. This paper investigates the effectiveness of sleep modes combined with machine learning (ML) approaches for traffic forecast. A portion of an RAN is considered, comprising one macro BS and a few small cell BSs. Each BS is powered by a photovoltaic (PV) panel, equipped with energy storage units, and a connection to the power grid. The PV panel and battery provide green energy, while the power grid provides brown energy. This paper examines the impacts of different prediction models on the consumed energy mix and on QoS. Numerical results show that the considered ML algorithms succeed in achieving effective trade-offs between energy consumption and QoS. Results also show that energy savings strongly depend on traffic patterns that are typical of the considered area. This implies that a widespread implementation of these energy saving strategies without the support of ML would require a careful tuning that cannot be performed autonomously and that needs continuous updates to follow traffic pattern variations. On the contrary, ML approaches provide a versatile framework for the implementation of the desired trade-off that naturally adapts the network operation to the traffic characteristics typical of each area and to its evolution. [ABSTRACT FROM AUTHOR]

Renewable energy sources are expected to replace traditional energy sources such as oil and gas in the future. It goes without saying that solar energy has been demonstrated to be a key source of green energy. Solar energy is used because it is abundant, pollution-free, and easily available. However, the power utility market requires highly exact solar energy forecasts. These challenges need the creation of a device that can precisely predict solar energy output via processing the location's weather data, which is accomplished through the use of machine learning and multiple linear regression (MLR). Some elements, such as the number of cloudy days, humidity, temperature, wind condition, and precipitation, should be addressed while simulating solar power output. In this paper, a 12-kW photovoltaic (PV) system on the rooftop of a house in Isfahan was studied using the System Advisor Model (SAM). The most significant research contribution of the proposed paper is to predict the output power of a solar system with the lowest possible error. According to the simulation results, by using the MLR model, the predicted power has an error of 6 % with the actual power, which is a very good estimation. In addition, this system meets each household's energy needs plus an additional 8430 kWh per year, resulting in being paid by utility companies, a fewer number of outages, and lower air pollution levels. [ABSTRACT FROM AUTHOR]

In recent years, traditional energy sources have caused a variety of negative impacts on the environment, and reducing carbon emissions is a top priority. The development of renewable energy technology is the key to transform the energy structure. Renewable energy represented by wind energy and photovoltaics has abundant reserves so they are connected to the grid system on a large scale. However, because of natural energy's randomness, renewable energy power generation poses potential risks to energy production and grid security. By making short-term forecasts of renewable energy generation power, the uncertainty of energy generation can be reduced, and it is crucial to study renewable energy forecasting techniques. This paper proposes an integrated forecasting system for renewable energy sources. Firstly, ensemble empirical mode decomposition is used for data preprocessing, and stationarity analysis is used for modal identification; then, support vector regression optimized by sparrow search algorithm and statistical methods are combined to make forecast according to different characteristics of the series respectively; finally, the feasibility of this method in renewable energy time series prediction is verified by experiments. The experiments prove that the proposed model effectively improves the accuracy and prediction performance on ultra-short-term renewable energy forecasting; and it has good applicability and competitiveness with different forecasting scenarios and characteristics, which satisfy the actual forecasting requirements in terms of operational efficiency and accuracy, thus providing a technical basis for the effective utilization of renewable energy. [ABSTRACT FROM AUTHOR]

Complex weather conditions--in particular clouds--leads to uncertainty in photovoltaic (PV) systems, which makes solar energy prediction very difficult. Currently, in the renewable energy domain, deep-learning-based sequence models have reported better results compared to state-of-theart machine-learning models. There are quite a few choices of deep-learning architectures, among which Bidirectional Gated Recurrent Unit (BGRU) has apparently not been used earlier in the solar energy domain. In this paper, BGRU was used with a new augmented and bidirectional feature representation. The used BGRU network is more generalized as it can handle unequal lengths of forward and backward context. The proposed model produced 59.21%, 37.47%, and 76.80% better prediction accuracy compared to traditional sequence-based, bidirectional models, and some of the established states-of-the-art models. The testbed considered for evaluation of the model is far more comprehensive and reliable considering the variability in the climatic zones and seasons, as compared to some of the recent studies in India. [ABSTRACT FROM AUTHOR]