Search

Electrode configuration is a key parameter that affect the operation of ESPs. In this study, through a wire-plate ESP at wide temperatures, the dynamic and ultimate removal characteristics of coal-fired power plant and coal pyrolysis furnace fly ash (ash A and B) with different resistivity under four electrode configurations were investigated. For ash A, the sawtooth electrode DE3 exhibited the largest current density under identical applied voltage. Each discharge electrode configuration had its efficient operating temperature. DE3 had the best removal performance when the temperature was 363 K and DE1 performed excellently at 500 K. For ash B, the removal efficiency with rod electrode DE4 was only 91.2% at 700 K in the simulated inert atmosphere. Through the optimization of electrode configuration with DE1, particles were effectively removed with collection efficiency exceeding 95%, and the particle removal efficiency of each diameter distribution was remarkably higher than that of DE4. Unlabelled Image • Four different electrode configurations were conducted to enhance the performance of ESP at high temperature. • The dynamic and ultimate removal characteristics were investigated. • The barbed electrode performed relatively best to remove particles at high temperatures. • A discharge electrode optimization with temperature regulation method was proposed. [ABSTRACT FROM AUTHOR]

Aiming at enhanced particulate matter (PM) removal of electrostatic precipitators (ESPs) in coal-fired power plants, a pulse energization power supply that generates high-voltage pulses superimposed on a high-voltage dc was designed. The integrated theories of corona discharge, particle charging, and removal were presented, and the pulse energization strategy was studied through fractional particle removal simulation. The conclusion of simulation stated that pulse energization could significantly improve particle charge with a maximum enhancement at a particle diameter of $20~\mu \text{m}$ , while the fractional particle removal efficiency shows a different distribution that removal of particles less than $2.5~\mu \text{m}$ had the most significant enhancement. Based on the design and simulations, a full-scale comparative operation study testified the potential of dc + pulse energization to enhance particle removal with a limited power consumption increase. Pulse energization was applied to different industrial ESPs with various design and operation parameters and shown multicondition adaptability in PM removal enhancement, with the emission reduction ranging from 45.48% to 58.00% and outlet concentration from 8.60 to 47.48 mg/Nm3, proving it a convenient and economical method in the performance boost of industrial ESPs. [ABSTRACT FROM AUTHOR]