Search

A single‐row crossflow heat exchanger with concentric and eccentric circular fins is designed and shown in this paper using a constructal design approach. The transverse fins spacing, the spanwise fins spacing, and the fin‐tube eccentricity are varied inside a fixed volume. In addition to the concentric case (ε = 0), two tube‐fin eccentricities are considered with (ε = ±0.25). The (heat transfer/volume) heat density is to be optimized with respect to the transverse and the spanwise spacing. The height and the width of the heat exchanger occupation space in addition to the fin diameter are fixed as design constraints. The crossflow is motivated by constant pressure drop with two dimensionless pressure drop numbers (Bejan number) (Be = 103 and 105). Both the fins and the tubes are maintained at a constant temperature, and they are cooled by the cross air of ambient temperature. The ratio of the fin to tube diameter is kept at 0.5. Three‐dimensional equations for conservation of mass, conservation of momentum, and conservation of energy are solved using finite volume method for incompressible and steady flows. The heat density for concentric fins (ε = 0) and eccentric fins (ε = ±0.25) is maximized two times, one with respect to transverse spacing, and the other with respect to spanwise spacing at Bejan numbers (Be = 103 and 105). The highest double‐maximized heat density is attained at the fin eccentricity (ε = 0.25). The increase in the double maximized heat density when the fin eccentricity (ε = 0.25) is 7.65% for Be = 103, and it is 12% for Be = 105. [ABSTRACT FROM AUTHOR]

The density of heat transfer rate from a vertical array of flat tubes in cross flow is maximized under fixed pressure drop using constructal design. With the constructal design, the tube arrangement is found such that the heat currents from the tubes to the coolant flow easily. The constraint in the present constructal design is the volume where the tubes are arranged inside it. The two degrees of freedom available inside the volume are the tube‐to‐tube spacing and the length of the flat part of the tubes (tube flatness). The tubes are heated with constant surface temperature. The equations of continuity, momentums, and energy for steady, two‐dimensional, and laminar forced convection are solved by means of a finite‐volume method. The ranges of the present study are Bejan number (dimensionless pressure drop) (103 ≤ Be ≤ 105) and tube flatness (dimensionless length of the tube flat part) (0 ≤ F ≤ 0.8). The coolant used is air with Prandtl number (Pr = 0.72). The results reveal that the maximum heat transfer density decreases when the tube flatness decreases at constant Bejan number. At constant tube flatness, the heat transfer density increases as the dimensionless pressure drop (Bejan number) increases. Also, the optimal tube‐to‐tube spacing is constant, irrespective of the tube flatness at constant Bejan number. [ABSTRACT FROM AUTHOR]