Search

In this article, we delve into the influence of fiber orientation (structural anisotropy) on paper imbibition, with a particular focus on in-plane imbibition. Utilizing the XLPA experimental method, we analyze several papers with different anisotropies, employing a constant volume of ethanol as the imbibing fluid. Our findings contribute novel insights into the anisotropic behavior of imbibition, a topic not extensively covered in the literature. We analyze how the orientation of fibers significantly influences lateral imbibition, providing a deeper understanding of the microfluidic properties of paper. The anisotropies found for imbibition fit perfectly with the existing data found in the literature, indicating the influence of fiber orientation. Furthermore, the kinetics are shown to be linked directly with the porosity.

In this article, we delve into the influence of fiber orientation (structural anisotropy) on paper imbibition, with a particular focus on in-plane imbibition. Utilizing the XLPA experimental method, we analyze several papers with different anisotropies, employing a constant volume of ethanol as the imbibing fluid. Our findings contribute novel insights into the anisotropic behavior of imbibition, a topic not extensively covered in the literature. We analyze how the orientation of fibers significantly influences lateral imbibition, providing a deeper understanding of the microfluidic properties of paper. The anisotropies found for imbibition fit perfectly with the existing data found in the literature, indicating the influence of fiber orientation. Furthermore, the kinetics are shown to be linked directly with the porosity. [ABSTRACT FROM AUTHOR]

Alumina-based multilayer laminates with layers of varied porosities and ceramic fiber reinforcements, which can be achieved by including paper-derived ceramic layers, are interesting candidates for chemically stable and thermal shock resistant materials. In order to investigate the complex sintering behavior of these laminates, the sintering of each alumina layer contained within a laminate, each one with its individual sintering anisotropy and sintering shrinkage, has to be considered separately. For this purpose, sintering curves are determined by dilatometry measurements, serving a consecutive examination by an analytical model. Modeling parameters specific to each layer, are applied in finite-element-type sintering simulations for symmetrical multilayer laminates. Differences in the sintering shrinkages may cause internal stresses at layer interfaces and, in turn, may influence the thermal and mechanical properties of multilayer laminates after sintering. Accordingly, the prediction of developing internal stresses within alumina-based multilayer laminates by the presented sintering simulations is a key aspect of this study. [Display omitted] • Individual laminates sintering dilatometry. • Anisotropic sintering assessment by analytic modeling. • Finite element simulation of multilayer laminates sintering. [ABSTRACT FROM AUTHOR]

Dimensional stability issues may occur in paper sheets when subjected to moisture content variations. Paper is in fact mainly composed of hydrophilic wood fibres that experience significant dimensional changes upon humidity variations. The hygro-expansive deformations at the single fibre level and their effects on the meso-structural fibrous network govern the hygro-mechanical response of paper at the macroscopic, sheet scale. The present contribution aims at offering a relation between theoretical predictions and experimental measurements of the hygro-expansive behaviour of paper. Experimental observations of the hygroscopic and mechanical response at the sheet level have been performed, providing the anisotropic hygro-elastic properties of the material in the in-plane principal directions. To understand the multi-scale nature of the phenomenon, a periodic two dimensional meso-structural model of the fibrous network has been developed. The effective material response is extracted via homogenization. The influence of several meso-scale parameters (hygro-mechanical properties and geometry of fibres, inter-fibre bonds and of the network) on the overall behaviour of the material can be studied; in particular, the in-plane fibre orientation distribution along a preferential direction affects strongly the anisotropy of the macro-scale response. The proposed model has been adopted to represent the effective material response, focusing on the hygro-elastic response only and thus neglecting possible irreversible effects occurring at the different scales. A comparison of the experimental data with the results obtained from the model as a function of the fibre orientation distribution reveals a good accuracy of the prediction, thereby showing its applicability to estimate paper’s hygro-expansive response. [ABSTRACT FROM PUBLISHER]

Summary: Despite the high energy density, the lithium metal electrode has been plagued for decades with a dendrite growth problem that can result in a battery thermal runaway. Here, we introduce anisotropic spatially heterogeneous three dimensional (3D) current collectors that prevent lithium deposition on the insulating electrolyte-facing surface and accommodate lithium deposition inside the spacious voids. The anisotropic spatial heterogeneity was introduced by a line-of-sight deposition of a thin SiO2 layer onto a carbon-fiber paper. The deposited SiO2 was later converted into SiC by a magnesiothermic reaction. The SiO2 and SiC decorated 3D current collectors were confirmed dendrite-free by ex situ SEM observation after a deep lithium deposition of 28.8Ccm−2 at a high current density of 4mAcm−2. A high lithium cycling efficiency of 94% was achieved over deep deposition (14.4Ccm−2) and stripping cycles in a carbonate based organic electrolyte, demonstrating the superiority of the novel current collector for dendrite control and lithium cycling. This strategy opens new avenues to address the dendrite problem by rationally designed current collectors and for the creation of a high energy density electrode. [ABSTRACT FROM AUTHOR]

Paper is mainly made up of cellulosic fibrous materials. On one hand, the nature of the fibres (softwood or hardwood) and on the other hand, their mechanical treatments severely affect the obtained porous structure. The porosity can vary from 1% to 95% according to the aimed end-use properties. Consequently, the mechanical behaviour strongly varies. Indeed, the mechanical resistance is related on the quality of fibres and the bonds between these fibres. Moreover, the mechanical behaviour of the final products is influenced by both the orientation of fibres and moisture. Consequently, it is important to better understand the moisture-induced changes of dimensions and mechanical properties of papers. Experiments were undertaken to this end. Moreover, in order to observe the fibrous microstructure of paper, experiments based on synchrotron microtomography were carried out with the help of the "European Synchrotron Radiation Facility" (ESRF). [ABSTRACT FROM AUTHOR]

Stochastic two-dimensional elastic–plastic network models are used to represent the inelastic deformation behavior of well-bonded paper. Linear kinematic hardening is employed with an initial non-zero back stress to represent anisotropic fiber yield. Network models are used to simulate simple monotonic tension and simple cyclic tension of paper materials. The performance of the models is compared to experimental results and found to perform reasonably well. The results suggest that interfiber bonding must be explicitly accounted for to adequately describe the material. Some discrepancy between the model and experimental cyclic tension results is believed to be due to time-dependent strain recovery in the material which is not represented in the network models. Experimental results are also presented which show that simple tension failure in these materials occurs along a line of localized deformation in a majority of the samples. This line is generally observed to form immediately prior to failure and is oriented at a well-defined angle with respect to the loading direction. [Copyright &y& Elsevier]

A paper web produced under industrial conditions always exhibits an anisotropy in its mechanical properties measured in the machine and cross directions. Proper and fast information about current paper anisotropy would significantly increase the efficiency of web quality control systems and allow to produce paper with greater precision. The main objective of the work presented was to determine the possibility of measurement of paper anisotropy. The method proposed is based on the image analysis of the orientation and location of special markers -- luminescent fibres -- which were introduced to the structure of the paper. Studies have shown that the method of image analysis provides a detection of fibres with a satisfactory level of efficiency, thus allowing accurate examination of the anisotropy of the paper samples analysed. On the basis of experiments, it was also found that the method of image analysis proposed allows to detect fibres with an accuracy appropriate for the problem under consideration. The invention presented has already been registered in a Patent Office as submission no. P.411294. [ABSTRACT FROM AUTHOR]

The structural features of four different kraft papers were related to their surface properties and to the response upon industrial impregnation with phenol−formaldehyde (PF) resin. The chemical composition and the structure of paper were suggested to be important factors determining the interaction with PF resin, which was assessed by contact angle measurements and surface energy analysis. The presence of fatty matter (extractives) and inorganic fillers together with structural anisotropy of paper confers the difference in affinity of the face and backside of papers toward PF resin. This affects the resin distribution in impregnated precured kraft papers as revealed by microfluorescence spectroscopic analysis of transversal cuts. [ABSTRACT FROM AUTHOR]

Laminated paperboard and paper is widely used in packaging products. It generally exhibits highly anisotropic and nonlinear mechanical behavior. The aim of this study is to describe the in-plane material behavior with an orthotropic elastic-plastic model based on the observed experimental behavior. A structural tensor-based approach was applied to model the elastic deformation, while a multi-surface based yield criterion was adopted to describe the yield behavior. The model incorporated nonlinear kinematic and isotropic hardening to capture the anisotropic hardening effect. In the experiment, the compressive yield stress was found to be insensitive to the previous tensile deformation. The proposed model could capture this compression yield stress preserving effect under reverse loading, which in turn reduced the required material parameters as expected. With the material parameters calibrated from a set of simple uniaxial tests in various directions, the model was shown to predict the stress-strain behavior for other orientations satisfactorily. The model was further validated with experiments under complex loading conditions and found to capture the highly anisotropic, elastic-plastic behavior accurately. [ABSTRACT FROM AUTHOR]

In this paper, a three-dimensional anisotropic multi-surface model for the in-plane elastoplastic deformation of paper and paperboard is developed. The model is based on the concept of structural tensors. It employs three different yield functions and parameterised consistency conditions for three different loading scenarios. The evolution of the yield surface with plastic strain is described by multiple hardening variables. Furthermore, the evolution equations are integrated using the unconditionally stable backward Euler method. Also, the internal variables are updated using a particular form of the elastic predictor/plastic corrector algorithm. The constitutive model is calibrated from a set of simple uniaxial tension tests performed in various directions of the material and is validated against loading in other directions. Additionally, the predictive capability as well as the numerical performance of the constitutive model is accessed against an existing non-quadratic plasticity model. Finally, the applicability of the constitutive model is demonstrated by performing a tensile test on a paperboard with a hole. [ABSTRACT FROM AUTHOR]

It is crucial for the successful application of high-temperature superconducting (HTS) power transformers that they are able to survive under abnormal operations, such as a short-circuit fault. Modeling, based on the design of a four-winding three-phase HTS power transformer, suggests severe boiling will occur on the surface of the winding during a short-circuit fault and will jeopardize the turn-to-turn insulation of the HTS power transformer. In this paper, a turn-to-turn insulation breakdown experiment platform involving the introduction of boiling on the surface of electrode has been built. Nomex 410 paper, one of the candidates for turn-to-turn insulation in the design of the HTS power transformer, was tested. The characteristics of dielectric strength of Nomex 410 in three different thicknesses (0.13, 0.18, and 0.25 mm) have been investigated, without boiling, as well as under different boiling situations, in an open bath of liquid nitrogen. The voltage application methods applied during both experiments test the electrical breakdown of Nomex 410 under a dynamic situation. The experiment results show that when under film boiling, compared to the test results for nucleate boiling, the dielectric strength of Nomex 410 paper decreases by approximately 38% of the value when no boiling is involved. Moreover, it is verified that the presence of an electric field accelerates the heat transfer between the liquid nitrogen and the heated electrode. [ABSTRACT FROM PUBLISHER]

Laminated paperboard and paper is widely used in packaging products. Its out-of-plane properties play a crucial role in converting paperboard to a carton through the creasing and folding process. The aim of this study is to describe the out-of-plane mechanical response with an elastic-plastic model based on the observed experimental behavior. The model was derived from a thermodynamic framework and was based on the multiplicative split of the deformation gradient in the context of hyperelasticity. A structural tensor-based approach was applied to model the elastic deformation, while a multi-surface based yield criterion was adopted to describe the plastic behavior. The model considers both material densification and internal friction effects, which were observed experimentally. According to the experimental behavior, a quadratic yield locus under pure shear loading was assumed in the model. Finally, the model was validated with a cylinder compression test and found to capture the highly anisotropic, elastic-plastic behavior accurately. [ABSTRACT FROM AUTHOR]

Abstract: The transport of electrons through the gas diffusion layer (GDL) of polymer electrolyte membrane (PEM) fuel cells has a significant impact on the optimal design and operation of PEM fuel cells and is directly affected by the anisotropic nature of the carbon paper material. In this study, a three-dimensional reconstruction of the GDL is used to numerically estimate the directional dependent effective electrical conductivity of the layer for various porosity values. The distribution of the fibers in the through-plane direction results in high electrical resistivity; hence, decreasing the overall effective electrical conductivity in this direction. This finding is in agreement with measured experimental data. Further, using the numerical results of this study, two mathematical expressions were proposed for the calculation of the effective electrical conductivity of the carbon paper GDL. Finally, the tortuosity factor was evaluated as 1.7 and 3.4 in the in- and through-plane directions, respectively. [Copyright &y& Elsevier]

Several charts are presented that list the best papers published by "Geophysics" from 1936-2010 and 2005-2010 according to the ISI Web of Knowledge, including "Weak Elastic Anisotropy," by L. Thomsen, "Migration by Fourier-Transform," by R. H. Stolt and "Data Adaptive Spectral Analysis Methods," by A. Spector and F. S. Grant.

Abstract: The multiple-relaxation-time (MRT) lattice Boltzmann method (LBM) with multi-reflection solid boundary conditions is used to study anisotropic permeabilities of a carbon paper gas diffusion layer (GDL) in a fuel cell. The carbon paper is reconstructed using the stochastic method, in which various porosities and microstructures are achieved to simulate different samples. The simulated permeability and tortuosity show anisotropic characteristics of the reconstructed carbon papers with in-plane permeability higher than through-plane, and in-plane tortuosity lower than through-plane. The calculated permeabilities are in good agreement with existing measurements. The relationship between the permeability and the porosity is fitted with empirical relations and some fitting constants are determined. Furthermore, the obtained relationship of tortuosity and porosity is used in a fractal model for permeabilities. The results indicate that the fractal model and the Kozeny–Carman equation provide similar predictions on the through-plane permeability of the carbon paper GDL. [Copyright &y& Elsevier]

Experiments and theory for bending wave propagation of paper sheets in tension are presented. An all-electronic pulsed TV holography technique is used to record the bending wave field initiated by a laser pulse. A theory for bending wave propagation in tensile-loaded paper is developed. The bending waves are influenced by mechanical properties such as density, thickness, bending stiffness, anisotropy and also by tensile forces in the paper. The paper stiffnesses are determined by matching the measured deformation field with the calculated theoretical field. The results show that the bending wave pattern is strongly influenced by the tensile force. For a non-destructive on-line measurement of, e.g. stiffnesses and anisotropy in the paper machine the tensile force must be considered. [Copyright &y& Elsevier]

A novel class of preceramic paper may serve as a preform to manufacture lightweight as well as multilayer ceramic products. In this article, we discuss the formation, microstructure, and properties of preceramic papers and their conversion into ceramic materials. Oxide as well nonoxide ceramics were processed into single-sheet, corrugated structures, and multilayer ceramics. A high filler loading and uniform distribution of ceramic fillers involves control of colloidal surface interaction including electrostatic, electrosteric, and mechanical retention. Sintering of an oxide-loaded preceramic paper in air results in highly porous products, with the porosity shape and distribution templated by the pulp fiber used in papermaking. In the case of carbide-loaded paper, dense composite materials are obtained by reactive infiltration processing. Anisotropic properties of machine-fabricated preceramic paper and bonding interfaces in multilayer stacks give rise to anisotropic mechanical properties of the resulting ceramic composites. Noncatastrophic failure was observed when tensile loading stress was applied parallel to the interfaces (in-plane loading). Applying well-established paper processing technologies, including laminated object manufacturing, ceramic structures of complex shape and size can easily be processed, offering a high potential for economical manufacturing. [ABSTRACT FROM AUTHOR]

An ultrasonic system that enables the measurement of paper properties like anisotropy or filler content is fully described in this paper. The system is composed of a measuring head that integrates 16 ultrasonic bimorph circumferentially disposed transducers. The hardware responsible for the emission and the reception tasks is PC controlled by means of an acquisition board and by specifically developed software. The experimental results obtained present a very good agreement with others obtained by classic methods, namely destructive tests, and allow evaluation of paper properties such as tensile stiffness index, tensile stiffness orientation angle, anisotropy and filler content, with good accuracy. [ABSTRACT FROM AUTHOR]

We try to assess the validity of assumptions taken when deriving drift velocity. We give simple formulas for characteristics of the spatiotemporal correlation function of the observed diffraction pattern for the frozen flow and the more general Briggs model. Using Low-Frequency Array (LOFAR) Cassiopeia intensity observation, we compare the experimental velocity scaling factor with a theoretical one to show that both models do not follow observations. We also give a qualitative comparison of our drift velocity estimates with SuperDARN convection maps. The article is essentially an extended version of the conference paper: "Determining ionospheric drift and anisotropy of irregularities from LOFAR core measurements", Signal Processing Symposium 2021 (SPSympo 2021). [ABSTRACT FROM AUTHOR]

Space charge behavior is important in the oil-immersed-paper insulation in converter transformers for HVDC transmission. This paper reports an investigation of the space charge property in samples with two layers of oil-immersed-paper and oil. Based on pulsed electroacoustic (PEA) technique, a waveform recovery method was proposed to get rid of the effects of interface and anisotropy on PEA result, and the space charge distributions in the two-layer samples under different voltage and oil thicknesses were measured. It?s found that the charges with the same polarity as oil side electrode were accumulated at the interface and gradually increased with the increase of applied voltage. However, the positive charge charges always appeared in the oil under positive and negative voltages. Moreover, the charges in samples increased with the increase of applied voltage, while the amount of interface charges decreased with the increase of oil thickness. Due to the existence of interfacial charges, the electrical field in oil-immersed-paper was distorted with its maximum close to the interface. It is indicated that due to the different mobility properties of charges in paper and oil and the interface trap state, the interface between paper and oil plays an important role in charge formation and decay. [ABSTRACT FROM PUBLISHER]

Abstract: A void network model, named Pore-Cor, has been used to study the permeation of an ink solvent into paper coating formulations coated onto a synthetic substrate. The network model generated anisotropic void networks of rectangular cross-sectional pores connected by elliptical cross-sectional throats. These structures had porosities and mercury intrusion properties which closely matched those of the experimental samples. The permeation of hexadecane, used as an analogue for the experimental test oil, was then simulated through these void structures. The simulations were compared to measurements of the permeation of mineral oil into four types of paper coating formulation. The simulations showed that the inertia of the fluid as it enters void features causes a considerable change in wetting over a few milliseconds, a timescale relevant to printing in a modern press. They also showed that in the more anisotropic samples, fast advance wetting occurred through narrow void features. It was found that the match between experimental and simulated wetting could be improved by correcting the simulation for the number of surface throats. The simulations showed a more realistic experimental trend, and much greater preferential flow, than the traditional Lucas–Washburn and effective hydraulic radius approaches. [Copyright &y& Elsevier]

Percolation theory is used to model intrinsic and relative permeabilities as well as tortuosity in anisotropic carbon paper gas diffusion layers (GDL) and compared with existing results from lattice-Boltzmann (LB) simulations and experimental measurements. Although single- and two-phase characteristics of the carbon paper GDL are mainly affected by medium geometrical and topological properties, e.g., pore-size distribution, connectivity, and pore geometry, analyzing capillary pressure curves implies that the pore-size distribution of the carbon paper GDL is very narrow. This suggests that its effect on tortuosity and wetting- and nonwetting-phase relative permeabilities is trivial. However, integrated effects of pore geometry, surface area, connectivity, and tortuosity on intrinsic permeability might be substantial. Universal power laws from percolation theory predict the tortuosity-porosity and relative permeability–saturation curves accurately, indicating both characteristics not affected by the pore-size distribution. The permeability–porosity relationship, however, conforms to nonuniversality. [ABSTRACT FROM AUTHOR]

Abstract: We have investigated motion of fullerene particles in isotropic and anisotropic dielectric medium for the purpose of application of the particles in electronic paper-like display. The charged particles require higher DC electric field to react in the isotropic silicone oil medium in comparison with anisotropic liquid crystal medium, confirming that the dielectrophoretic force is mainly responsible for the motion of the particles. In addition, we proposed device which can express black, gray and white states with three terminal electrodes by suitable combination of the polarity of applied DC bias field. Finally, our investigation provides the optimization of driving scheme as well as electrode structure. [Copyright &y& Elsevier]

Abstract: A finite element procedure, developed in order to account for the effect of high anisotropy at folding of coated papers, is presented. The anisotropic behaviour (with very low stiffness in the thickness direction) is modelled using stiff structural elements (trusses and beams). The numerical results indicate that high elastic anisotropy leads to lower strain levels at folding than reported in previous analyses where this effect was not accounted for. High plastic anisotropy, on the other hand, will contradict this result. [Copyright &y& Elsevier]

Graphene-based electrodes typically form a compact uniaxially oriented stacked structure during electrode preparation due to the highly anisotropic morphology. This leads to limited diffusion paths for the insertion of Li or Na when used as electrodes in rechargeable batteries. Here, we demonstrate that self-standing electrodes formed of randomly folded and/or crumpled graphene nanosheets can be obtained via a simple modified reduction process, and that the crumpled structure can significantly increase the power capability of graphene-based anodes of sodium-ion batteries. These electrodes can deliver a power density of approximately 20,000 W kg −1 , which surpasses the Li storage capability of conventional graphene paper electrodes. Moreover, the specific capacity was stably maintained without a binder, conductive agent, or substrate for more than 500 charge/discharge cycles and 1000 cycles of repeated bending. [ABSTRACT FROM AUTHOR]

Liquid spreading is fundamental to many applications in interfacial materials. However, anisotropic spreading inside superlyophilic fabrics, playing an important role in clothing materials, ink printing, medical masks, and paper manufacturing industry, is rarely studied. Here, a special wetting phenomenon is introduced on Chinese Xuan papers, a kind of handmade papers dating from thousands of years ago in China, mainly for painting and calligraphy with Chinese brushes. Different from other papers or porous materials, liquid, such as ink, prefers to spread along the 2D direction, meaning that liquid can spread out rapidly while it seldom permeates through the papers, avoiding blotting of the underlying sheet. The antipermeation test shows that 150 µL of water is added to Xuan papers without permeation, which is attributed to the multilayered spreading, resulting from the layered anisotropic micro/nanofibrous structures. Inspired from this, similarly structured fabrics with liquid 2D prior spreading and antipermeation abilities are electrospun. About 175 µL of water is able to spread completely without permeation. These findings demonstrate a new wetting concept for manufacturing antipermeation materials with controlled ultrafast 2D spreading properties. Inspired by Chinese Xuan paper, two dimensional (2D) prior spreading is a special wetting phenomenon that layered micro‐ and nanostructures of such paper contribute to multi‐layered spreading behaviors. Fast spreading is facilitated on a 2D plane and liquid transportation is restrained along the normal direction, providing a new approach for fabricating materials with both anti‐permeation and fast spreading abilities. [ABSTRACT FROM AUTHOR]

Abstract: An anisotropic elasto-plastic constitutive model of paper material is presented. It is formulated in a spatial setting in which anisotropic properties are accounted for by use of structural variables. A multiplicative split of the deformation gradient is employed to introduce plasticity. A similar approach is used to model the plastic deformation of the substructure. The yield surface adopted is based on the Tsai–Wu failure criterion, used previously to model failure of paper material. A non-associated plasticity theory is employed to calibrate the model to experimental data. It turns out that a multi-axial loading situation is needed to calibrate the model and here a biaxial tension test is audited. The model was implemented into a finite element environment and the creasing process of a corrugated board panel is investigated. [Copyright &y& Elsevier]

This paper presents a milling force model for carbon fiber-reinforced polymer (CFRP) multidirectional laminates based on segmented specific cutting energy. The proposed model simplifies the milling process of CFRP unidirectional laminates into multiple orthogonal cuttings. The CFRP specific cutting energy was determined by experimental segmentation. An empirical formula for the CFRP segmented specific cutting energy was established, and the milling force of the CFRP multidirectional laminates was predicted using the linear superposition principle. Experimental results confirmed the high accuracy of the milling force model. The specific cutting energy gradually decreased with increasing equivalent cutting thickness. With an increase in the fiber cutting angle θ, the specific cutting energy increased first and then decreased, peaking around θ = π/2. [ABSTRACT FROM AUTHOR]

Abstract: The rheological nature of paper or board is usually treated either as elasto-plastic or as viscoelastic depending on the studied paper making process or behavior in converting and end use. In this paper we study several stress–strain curve models and the determination of material parameters from an elasto-plastic point of view. Finally, a suitable approach for all stress–strain curves measured from 180 strips is constructed using a linear function for an elastic region and a nonlinear function for a strain hardening region. This model determines a proportional limit (elastic limit) and gives fairly elegant dependencies between material/fitting parameters and two important factors of mechanical properties of paper: dry solids content and anisotropy. In this paper the dependency of a plastic strain on dry solids content and anisotropy is estimated using the introduced stress–strain curve model. Correspondingly, the model can be used to estimate many other mechanical behaviors, for example, the tension differences arising from non-uniform moisture content of the paper web profile. However, the main target of this study is to produce competent parameters based on modeled stress–strain curves for further construction of a material model. This elasto-plastic material model will be utilized in out-of-plane deformation and fracture models. [Copyright &y& Elsevier]

Abstract: In this paper a simplified network model for mechano-sorptive creep is presented, which is a further development of an earlier paper [Strömbro, J., Gudmundson, P., 2008. Mechano-sorptive creep under compressive loading – a micromechanical model. International Journal of Solids and Structures 45 (9), 2420–2450.]. It is assumed that the anisotropic hygroexpansion of the fibres leads to large stresses at the fibre bonds when the moisture content changes. The resulting stress state will accelerate creep if the fibre material obeys a constitutive law that is non-linear. Fibre kinks are included in order to capture experimental observations of larger mechano-sorptive effects in compression than in tension. Moisture dependent material parameters and anisotropy in the fibre distribution have been introduced. Theoretical predictions based on the model are compared to experimental results for an anisotropic paper both under tensile and compressive loading at varying moisture content and it is found that the important features in the experiments are captured by the model. Different kinds of drying conditions have also been examined. [Copyright &y& Elsevier]

"Energy efficiency" and "Green Technology" are currently buzzwords in the display industry. Upcoming mandatory energy regulations are further driving this development, challenging the display industry. Within this context, we would like to demonstrate the advantage of UBplus LC technology for application in TVs. UBplus technology using LC mixtures with negative dielectric anisotropy offers a unique solution to this challenge due to a high transmittance level, whilst retaining the classic FFS cell layout. This paper summarizes the recent developments of liquid crystal mixtures for UBplus. [ABSTRACT FROM AUTHOR]

A novel method is presented for distinguishing postal stamp forgeries and counterfeit banknotes from genuine samples. The method is based on analyzing differences in paper fibre networks. The main tool is a curvelet-based algorithm for measuring overall fibre orientation distribution and quantifying anisotropy. Using a couple of more appropriate parameters makes it possible to distinguish forgeries from genuine originals as concentrated point clouds in two- or three-dimensional parameter space. [ABSTRACT FROM AUTHOR]

Experimental studies show that initial fabric and its evolution under different stress paths greatly influences soil behaviour. Even though different sample preparation methods create different inherent anisotropies and cause different material responses, the same initial fabric structure under different stress paths also results in different material behaviours. In this paper, a simple state-dependent, bounding surface-based elastoplastic constitutive model, which can simulate the anisotropic nature of sands including the effect of principal stress rotation, is described. The model is developed based on a semi-micromechanical concept within the multilaminate framework and, to include the inherent anisotropy of sand, a deviatoric fabric tensor describing the initial microstructure is introduced. In addition, a fabric evolution rule compatible with anisotropic critical state theory is employed to describe the evolving fabric structure and induced anisotropy towards the critical state. In contrast to the classical strain-driven formulation for fabric evolution, a micro-level evolution rule is proposed. This paper presents concise theoretical aspects of the multilaminate framework and the anisotropic elastoplastic constitutive formulation. The model's capability under drained and undrained monotonic loading conditions at different stress states, relative densities and principal stress orientations is demonstrated by simulating experimental data for Toyoura sand. [ABSTRACT FROM AUTHOR]

Abstract: We fabricated large-scale anisotropic carbon nanotube (CNT) paper sheets by stacking long-lasting multiwalled CNT (MWCNT) webs without using binder materials. The MWCNTs are highly aligned in the webs and they retain their alignment in the fabricated paper. Although MWCNTs are just connected by van der Waals force, tensile strength is as strong as 75.6MPa. In addition, resistivity and thermal conductivity is as good as 2.5×10−3 Ωcm and 70W/mK, respectively. The present high anisotropy ratios of 7.3 in resistivity and of 8.1 in thermal conductivity are due to the high alignment of the ultra-long MWCNTs which have lengths of millimeters. High-speed web drawing with a draw speed of over 10m/s enables very rapid fabrication. The material properties of CNT structures can be measured by conventional methods for macroscopic samples rather than methods designed for nanomaterials. CNT web technology will enable CNTs to be used in new applications. [Copyright &y& Elsevier]

Abstract: The porosity and specific surface areas of four industrial paper materials were determined from synchrotron X-ray microtomography. The porosity profile within the thickness of each paper material shows that a paper sheet consists of three layers: two boundary layers, which present a strong gradient of porosity, and a “bulk” layer in which the porosity is almost constant. The anisotropy and the heterogeneity scale of the microstructure in the “bulk” layer was then analyzed by means of covariograms. It is shown that the microstructure of the four studied papers is transverse isotropic and that the anisotropy of papers containing fillers is less pronounced. Finally, the representative elementary volume (REV) for both studied microstructural properties was evaluated using two techniques: a systematic analysis of the influence of the volume size on the property measurement, and a statistical methodology. The REVs given by both methodologies are then compared. [Copyright &y& Elsevier]