Search

With the development of aviation industry, a series of problems have appeared in aviation and airspace, among which the most prominent problem is the congestion of aviation and airspace. Airspace congestion has become a major problem in the development of civil aviation in China. Especially in the central and eastern regions of China, airspace congestion is becoming more and more serious. To better solve the problem of airspace congestion, rough set theory and the Fuzzy C-means (FCM) model are first analyzed. By analyzing the temporal and spatial characteristics of traffic congestion in the control sector, a multisector traffic congestion identification model is established based on radar track data. Four multisector congestion characteristics including equivalent traffic volume, proximity, saturation, and traffic density are established. FCM and rough set theory are used to classify and identify sector congestion. Finally, the model based on FCM-rough set theory is compared with other methods based on the data of the regional control sector in northwest China. The experimental results show that the congestion recognition rate of the model is 92.6%, 93.5%, and 94.2%, and the congestion misjudgment rate is 1.5%, 1.2%, and 1.3%, respectively. Hence, the multisector congestion recognition model has a high recognition rate and a low misjudgment rate, and the overall discrimination result is relatively stable. By comparing the proposed method with other methods, it is concluded that the recognition accuracy of the model based on FCM theory is superior to other methods. In summary, the congestion situation of the sector is affected by a variety of macro- and micro-characteristics of the sector, and the congestion identification model is feasible and efficient. Multisector traffic congestion identification has certain application value for airspace planning, air traffic control-assisted decision making, and air traffic flow management. This work can optimize the aviation and airspace management system and provide relevant suggestions for the study of aviation and airspace congestion. [ABSTRACT FROM AUTHOR]

In recent years, urban traffic congestion has seriously affected the healthy development of urbanization in China. And many measures to combat congestion have had little effect. The purpose of this paper is to find out the most reasonable and sustainable measures to control traffic congestion. Based on the theory of system dynamics, this study constructs a model of the formation mechanism of urban traffic congestion in China, and analyzes the thinking error of the traditional strategy of "building roads to eliminate traffic congestion" This study includes the current policy measures to control traffic congestion in the system dynamics model and analyzes the influence of each measure on the formation mechanism of urban traffic congestion. Then, it critiques the unsustainability of rigid policies, such as the vehicle number limit and the "similar road building to control traffic congestion" policies. This study reveals that of the five policies adopted by the government to alleviate traffic congestion, and come to the conclusion: the "sparse block collocation" policy is the most sustainable and fundamental congestion control measure. To achieve efficient traffic congestion control and support the healthy development of urbanization in China in the future, the government should increase the balance of infrastructure investment to improve the slow environment of public transport, adhere to public transport-oriented land development policies, raise the cost of motor vehicle travel, and promote urban traffic. [ABSTRACT FROM AUTHOR]

Two-stop-line signalized roundabouts (TSLSR) are widely utilized in China. To calculate the capacity and optimal cycle length accurately, a model considering internal space constraint of the roundabout is developed in this paper. Firstly, the operational principle of TSLSR is analyzed. TSLSR is modeled as being equivalent to a four-phase intersection with left-turn protection phases, and the left-turn lane is further simplified as the "short-lane model". Secondly, based on the above analysis, the capacity of TSLSR is modeled and additionally, the accuracy and sensitivity of the model are also analyzed. Finally, the optimal cycle length of TSLSR which maximizes the capacity is put forward. Results show that the accuracy of the capacity model is low without considering the internal space constraint of the roundabout. However, the model developed in this paper is shown to improve the accuracy (about 20%) and control the relative error to be within 10%. The parameter sensitivity analysis demonstrates that the cycle length and radius of the central island have a significant influence on the capacity of the left-turn lane and results in an optimal value of signal cycle length maximizing the capacity. [ABSTRACT FROM AUTHOR]

Station inflow control (SIC) is an important and effective method for reducing recurrent congestion during peak hours in the Beijing, Shanghai, and Guangzhou subway systems. This work proposes a practical and efficient method for establishing a static SIC scheme in normal weekdays for large-scale subway networks. First, a traffic assignment model without capacity constraint is utilized to determine passenger flow distributions on the network. An internal relationship between station inflows and section flows is then constructed. Second, capacity bottlenecks are identified by considering the transport capacity of each section. Then, a feedback-based bottleneck elimination strategy is established to search target control stations and determine their control time and control strength. To validate the effectiveness of the proposed approach, a decision support system coded in the C# programming language was developed, and the Beijing subway was used as a case study. The results indicate that the proposed method and tool are capable of practical applications, and the generated SIC plan has better performance over the existing SIC plan. This study provides a practical and useful method for operation agencies to construct SIC schemes in the subway system. [ABSTRACT FROM AUTHOR]

The expressways in Beijing are confronted with more serious traffic congestions. Based on the survey data obtained fromthe typical sections at the expressways, the time dependent characteristics of traffic flow parameters were analyzed in detail and the data gap was found in this paper. The Fast Fourier Transform (FFT) method is proposed to transfer the data of traffic flow parameters for describing the fluctuation characteristics of traffic flow. Two methods of identification, the graph method and the control line method, were proposed as to the change time of traffic bottleneck forming and dissipating. The findings in this paper have already been applied in traffic management and ramp control at the expressways in Beijing. [ABSTRACT FROM AUTHOR]

Abstract: With China''s urbanization construction development, urban size becomes larger and larger, and the number of urban vehicles is increasing rapidly. The contradictions rise with the keeping on huge demand road while the infrastructure is relatively insufficient. To settle down the traffic problem, technical measures should be taken. In this paper, we propose a RFID-based intelligent traffic control system. The contributions of our work is defining the RFID-based intelligent traffic control system (RITCS in short) that can ease traffic jam phenomenon, Judging crossroad''s jam caused by traffic accident and alarming automatically, informing drivers the traffic jams situation direction of forward motion by notice board, and changing the signals to control the traffic volume dynamically to ease the traffic pressure. The algorithm proposed in the paper descript how the traffic accident being judged, how the signals are changed and what message about the traffic situation being showed on the notice board. The experiment result shows that the algorithm can help improving the crossroads’ traffic volume and easing the traffic jam to the best. [Copyright &y& Elsevier]

Nowadays, traffic congestion has become a significant challenge in urban areas and densely populated cities. Real-time traffic signal control is an effective method to reduce traffic jams. This paper proposes a particle swarm optimisation with linearly decreasing weight (LDW-PSO) to tackle the signal intersection control problem, where a finite-interval model and an objective function are built to minimise spoilage time. The performance was evaluated in real-time simulation imitating a crowded intersection in Dalian city (in China) via the SUMO traffic simulator. The simulation results showed that the LDW-PSO outperformed the classical algorithms in this research, where queue length can be reduced by up to 20.4% and average waiting time can be reduced by up to 17.9%. [ABSTRACT FROM AUTHOR]

According to the Chinese Association of Automotive Industry, China produced over 4 million vehicles in the first 11 months of 2003, an increase of more than 35 percent over the same period in 2002. Of these vehicles, over 2 million are passenger cars, an increase of 85 percent in production and 75 percent in sales. Furthermore, the Forecast Department of the National Information Center of China has predicted that the Chinese automotive industry will produce over 5 million vehicles in 2004 and is entering a long, steadily growing era. A major problem associated with such rapid growth in automotive production is an increase in traffic congestion and accidents, especially in big cities such as Beijing, Shanghai, and Guangzhou. According to China's Ministry of Public Safety, 667,507 traffic accidents were reported in 2003, resulting in 104,372 deaths, 494,174 injured people, and a direct economic cost of 3.37 billion U.S. dollars. In China, traffic accidents cause on average one injury every minute and one death every 5 minutes. INSET: Editor's Perspective..