Search

The work is based on a collaboration between Hiroshima University and Kure KOSEN College. This paper presents the design concept, hardware, and applications of a single-phase synchronous inverter (SSI), a specially designed grid-forming inverter (GFM) for single-phase micro-grid (SMGs). The SSI is designed for the conventional 100/200 V distribution network and is based on the concept of "Non-Interference Core (NIC) dynamic model". Novel contributions of this paper are: (1) A root mean square (RMS) model of NIC-SSI was developed, combined with the conventional power system model, and verified through the comparison with the hardware-in-the-loop (HIL) simulation and SSI hardware experiments; (2) using the developed RMS simulation tool, the stabilization effect of the SSIs was investigated in condition under which the SSIs are massively installed in a distribution system; (3) off-grid SMG operations using SSIs under various ill-conditioned loads were demonstrated. The results show that the SSI has the considerable ability of grid stability enhancements for frequency, transient, and small-signal stabilities. The proposed SMG using SSIs is promising. [ABSTRACT FROM AUTHOR]

This paper summarizes our recent work on Grid‐Forming Inverter (GFM) application to power systems. We have developed a novel design of GFM, a single‐phase synchronous inverter (SSI) for the conventional 100/200V distribution network based on the concept of "non‐interference core (NIC) dynamic model." This paper first explains the design concept of NIC‐SSI and a simulation model of SSI for power system analysis. Then the stabilization effect is investigated, where the installation of SSI on the single‐phase consumer side is assumed as a new concept. The improvement of frequency and transient stability are evaluated. The SSI model is verified by comparing the developed root mean square (RMS) simulation, hardware‐in‐the‐loop (HIL) simulation, and the experiment using SSI hardware. The simulation results show that the SSI has the considerable ability of grid stabilization. Singlephase micro‐grid (SMG) operations using SSIs are also presented. The effectiveness of SMG operations is shown based on laboratory experiments. [ABSTRACT FROM AUTHOR]

Worldwide energy shortages and the green energy revolution have triggered an increase in the penetration of standalone microgrids. However, they have limited generation capacity and are wasteful when excess generated energy is curtailed. This presents an opportunity for the coordinated operation of multiple prosumer microgrids that absorb this waste to enhance their resiliency and reliability. This paper proposes a reliable prosumer model with an inbuilt energy management system (EMS) simulator that considers the mentioned deficiencies for constructing resilient interconnected prosumer microgrids. The EMS simulator operates in a real-time dynamic environment to coordinate the prosumer components and performs flexible switching for (1) prioritizing critical load by shedding the non-critical load and (2) meeting load demand locally or from other interconnected prosumers. The EMS simulator maintains energy balance by setting limits for the battery energy storage system (BESS) to preserve energy during low generation and performs real-time monitoring. The novelty of this model lies in its simplicity and flexibility, which allows interconnected prosumer microgrids to operate in cooperation without the need for communication. The proposed model is evaluated in a post-disaster off-grid scenario using a single-phase average value model that considers reasonable computation time. The simulation results of the proposed system indicate the preservation of stored energy while maintaining critical resources beyond three days of poor weather conditions. [ABSTRACT FROM AUTHOR]