Search

Enhancing paper hydrophobicity is of key importance for many paper-based applications. Fatty acids or vegetable oils and their derivatives replace environmentally harmful conventional coating materials but still require challenging chemical reactions for covalent attachment onto paper. Here, we show that simple storage of olive oil-coated cotton linter paper at 70 °C and subsequent Soxhlet extraction is able to endow paper with hydrophobic properties, reaching water contact angles above 130°. In-depth chemical and morphological analytics show the relevance of temperature and air accessibility during the aging process compared with aging at ambient temperature and under the exclusion of oxygen, underlining the importance of assessing a coating's long-term performance and stability under diverse storage conditions. Simple storage of vegetable oil-coated paper at elevated temperatures followed by extraction proves to be an easy way to produce stable covalently attached hydrophobic paper coatings with exceptionally low coating amounts. [ABSTRACT FROM AUTHOR]

Hydrophobic coatings are of utmost importance for many applications of paper-based materials. However, to date, most coating methods demand vast amounts of chemicals and solvents. Frequently, fossil-based coating materials are being used and multiple derivatization reactions are often required to obtain desired performances. In this work, we present a solvent-free paper-coating process, where olive oil as the main biogenic component is being used to obtain a hydrophobic barrier on paper. UV-induced thiol-ene photocrosslinking of olive oil was pursued in a solvent-free state at a wavelength of 254 nm without addition of photoinitiator. Optimum reaction conditions were determined in advance using oleic acid as a model compound. Paper coatings based on olive oil crosslinked by thiol-ene reaction reach water contact angles of up to 120°. By means of Fourier transform infrared spectroscopy and differential scanning calorimetry, a successful reaction and the formation of a polymer network within the coating can be proven. These results show that click-chemistry strategies can be used to achieve hydrophobic polymeric paper coatings while keeping the amount of non-biobased chemicals and reaction steps at a minimum. [ABSTRACT FROM AUTHOR]

Predictive models for the transport of volatile organic compounds in paper need to consider the complex interplay of diffusion, adsorption, desorption, or chemical reactions. The relative importance of each of these processes is determined by the polarity of the volatile. Hence, it is challenging to pick a valid theoretical model that correctly predicts transport regardless of the polarity. Here, physics-informed neural networks (PINNs) assess which of five different models correctly describe transport of DMSO as polar and n-tetradecane as apolar model compound: (i) a pseudo first-order adsorption model for an irreversible sorption process, (ii) a first-order kinetics model allowing reversible sorption, (iii) a second-order model with a reversible process, and an effective diffusion model accounting for a constant (iv) and for a variable effective diffusivity (v). Each tested model is given as set of partial differential equations (PDE). Considering the model under testing and experimentally obtained spatially and temporally resolved concentration profiles through stacks of paper sheets, PINNs predict concentration of the volatiles and associated material constants such as sorption constants and effective diffusion coefficients by solving the inverse problem. Our PINNs revealed two models, pseudo first-order sorption and second-order reversible sorption, that correctly predict concentration profiles and polarity-driven differences in sorption times. While a PINN-based picking of valid transport models has important implications for the development of effective methods for controlling emission of volatiles from paper materials, PINNs represent a versatile mathematical tool to validate or refute the capability of PDE-based theoretical models to describe experimental data. • PINNs evaluate sorption kinetics in porous materials. • Focus: Transport of organic volatiles in cellulose. • Pseudo first-order model suits organic volatiles. • Predicting transport of volatiles through paper. [ABSTRACT FROM AUTHOR]

The pigment coating of paper is usually performed to enhance the physical properties of paper and its printability. The coating generally makes paper whiter, brighter and more opaque. The properties of the coated paper depend, among others, on the porous structure of the coating developed, which is determined by the pigments, binders and their reactions. The influence of the type and quantity of coating components and ink absorption into the coating layer was studied in this work. Printing ink penetration was measured using a Penetration Dynamic Analyser with a HVL module (High Viscous Liquid). The evenness of liquid penetration into paper was measured using a Penetration Dynamic Analyser with a PEA module (Print Evenness Analyser). Results obtained indicate that all three variables - coating pigment type, latex dose and ink type - may have an equally strong influence on liquid and ink penetration, and thus on print quality. [ABSTRACT FROM AUTHOR]

High-resistance paper was manufactured by laccase-grafting of carboxymethyl cellulose (CMC) and chitosan (CPX) on Kraft pulp fiber. The reaction was mediated in the presence of laccase by one of the following polyphenols in the presence of air: gallic acid (GA), vanillic acid (VA) and catechol (1,2-DHB). Enzyme was added at constant loading (24 kg ton-1), 1% pulp consistency, 0.005% CMC, pH = 6.3 ± 0.5 and 2 mM of mediator. CPX content was assessed at two levels (0% and 0.005%). Treated pulps were analyzed by different mechanical tests (ring crush, mullen, corrugating medium test (CMT) flat crush of corrugating medium test and tension). An improvement in these parameters was obtained by biopolymer coupling and selected mediator. When using GA, three parameters increased more than 40%, while ring crush increased 120%. For the case of VA, properties were enhanced from 74% to 88% when CPX was added. For 1,2-DHB, there was not found a statistically significant difference between the results in the presence of CPX. Scanning electron microscopy, confocal microscopy, FTIR and 13C NMR were used in all papers in order to evaluate grafting. Hence, it was possible to correlate polymerization with an improvement of paper's mechanical properties. [ABSTRACT FROM AUTHOR]

Abstract: With many important artistic works and documents made of paper, and thus susceptible to biodeterioration by fungi, research is required in an effort to replace toxic chemical products with other more benign ones. In this work the antifungal effect of methyl and propyl paraben mixtures at different concentrations was evaluated. The fungi used in the experiments were a Cladosporium species and Penicillium corylophilum, both of which are well known as paper-biodeteriorating fungi. The results demonstrate that a mixture of 0.5% methyl paraben and 1% propyl paraben, in 85% ethanolic solution, is the lowest concentration necessary to provide an efficient antifungal action. A deacidification agent, 5% calcium propionate, was added to this mixture to produce a multi-purpose formulation to treat acidification and fungal contamination of paper documents. Tests carried out on paper samples before and after application of this mixture showed only a minor increase in yellowing and a slight decrease in tensile strength, while substantially raising the pH, and thus the alkaline reserve, and also a slight increase in the percentage of deformation. [Copyright &y& Elsevier]

This article describes a method for the modification of paper with single-wall carbon nanohorns (SWCNHs) to form stable suprastructures. The SWCNHs form stable dahlia-like aggregates in solution that are then self-assembled into superior structures if the solvent is evaporated. Dipping paper sections into a dispersion of SWCNHs leads to the formation of a thin film that can be used for microextraction purposes. The coated paper can be easily handled with a simple pipette tip, paving the way for disposable extraction units. As a proof of concept, the extraction of antidepressants from urine and their determination by direct infusion mass spectrometry is studied. Limits of detection (LODs) were 10 ng/L for desipramine, amitriptyline, and mianserin, while the precision, expressed as a relative standard deviation, was 7.2%, 7.3%, and 9.8%, respectively. [ABSTRACT FROM AUTHOR]