Search

The angular log-periodic meander-line traveling wave tube (TWT) is a kind of low voltage, small-sized, high power, low cost, on chip amplifiers, and considered as a key part of the advanced communication systems, the future biomedical applications and the next electronic counter measure (ECM) instruments et al. Here, an angular log-periodic meander-line TWT is presented in this article. The angular log-periodic meander-line slow wave structure (SWS) is supported by two diamond rods. The dispersion and the impedance characteristics are analyzed in detail. In order to reduce the reflection loss, a gradual ridged waveguide is connecting the input–output standard rectangular waveguide to the meander-line SWS. The particle in cell (PIC) simulations show that the output power of the TWT can reach 55 W at 34 GHz with the operation voltage of 1800 V and the beam current of 0.2 A. The SWS is manufactured by a laser machine with Molybdenum sheet. The assembled TWT is tested and the results show that the ${S}_{{11}}$ is less than −10 dB at 30–39 GHz. The ${S}_{{21}}$ mismatch between the simulated and the measurement is discussed at the end. [ABSTRACT FROM AUTHOR]

In this article, a novel dielectric-supported staggered dual-meander-line (DS-SDML) planar slow-wave structure (SWS) is proposed for a traveling wave tube (TWT) working at ${E}$ -band. The proposed staggered arrangement of meander-lines (MLs) leads to a stronger beam–wave interaction and achieves higher output power as compared to the symmetric arrangement. The input–output couplers have been designed by using staggered stepped double ridge waveguide, to connect the standard ${E}$ -band rectangular waveguide and the DS-SDML SWS. An attenuator and pitch tapering have been applied to the proposed SWS to suppress the unwanted frequencies and to improve the output power. Particle-in-cell (PIC) simulation results show that for an 11.8-kV, 200-mA sheet-beam, the output power can reach 283 W at 75 GHz, with a maximum gain and electronic efficiency of 34.5 dB and 11.9%, respectively. [ABSTRACT FROM AUTHOR]

The symmetrical microstrip angular log-periodic meander-line (ALPML) slow-wave structure (SWS), which is suitable for Ka-band low-voltage traveling-wave tubes, is described in this paper. The dispersion characteristics and coupling impendence of this kind of SWS are achieved by simulation. A radial uniform magnetic field of 0.4 T is developed using radially magnetized permanent magnets to focus the radial sheet electron beam. To exploit the potentialities of the symmetrical ALPML SWS, the beam–wave interaction is carried out with a radial convergent and a divergent sheet electron beam. For the radial divergent electron beam with a voltage of 791 V and a current of 0.3 A, an output power over 60 W with an electron efficiency of 26% at 30 GHz is achieved from particle-in-cell simulation. The effects of misalignments and phase mismatches are carried out at the end. [ABSTRACT FROM AUTHOR]

A novel slow wave structure (SWS) named angular log-periodic meander-line is proposed for a radial traveling wave tube (TWT). In this paper, a 30 log-periods microstrip angular log-periodic meander-line SWS is studied. The dispersion of this kind of SWS is weak, which shows that it can work in a wide operating bandwidth. The more important advantage is that the operating voltage is much lower than that of the conventional TWT at the same operating frequency and the geometrical dimension is also much smaller than that of the conventional TWT. The beam–wave interaction of the angular log-periodic meander-line TWT is calculated using the particle-in-cell method. When the operating voltage is 1624 V, this kind of TWT can give 156.5-W output power at 35 GHz, the gain is 21.9 dB, and the electron efficiency is \sim17.7\%. With this kind of TWT as mentioned, the concept of radial integrated angular log-periodic meander-line TWT is proposed, which can provide a new way to obtain higher output power. [ABSTRACT FROM PUBLISHER]