Search

The research presented in this paper introduces a novel environmental energy‐harvesting technology that harnesses electricity from the evaporation of water using porous structural materials. Specifically, a strategy employing paper‐based hydroelectric generators (p‐HEGs) is proposed to capture the energy produced during water evaporation and convert it into usable electricity. The p‐HEGs offer several advantages, including simplicity in fabrication, low cost, and reusability. To evaluate their effectiveness, the water evaporation‐induced electrical output performance of four different p‐HEGs are compared. Among the variants tested, the p‐HEG combining wood pulp and polyester fiber exhibits the best output performance. At room temperature, this particular p‐HEG generates a short‐circuit current and open‐circuit voltage of ≈0.4 µA and 0.3 V, respectively, thereby demonstrating excellent electrical stability. Furthermore, the electrical current and voltage generated by the p‐HEG through water evaporation are able to power an LED light, both individually and in series and parallel connections. This study delves into the potential of electricity harvesting from water evaporation and establishes it as a viable method for renewable energy applications. [ABSTRACT FROM AUTHOR]

• Hydroxyapatite (HAP) composite paper with biocompatibility and hygroscopicity was prepared. • HAP composite paper has better hygroscopic and triboelectric properties than pure paper, making it more suitable for wearable sensing applications. • The HAP composite paper-based triboelectric nanogenerator can detect and distinguish different joint movements. • Hemostatic and disposable HAP composite paper can be degraded in the natural environment without harm. Wearable triboelectric nanogenerators (TENGs) have attracted considerable attention in the field of self-powered sensors that can be worn on the skin directly without packaging because of their breathability, conformability, and sensitivity to collect biomechanical energy. However, high humidity on the skin can affect the wearable TENG output performance, substantially affecting the sensor performance and stability. When worn for a long time, humidity can even cause skin inflammation. Thus, for a wearable TENG, moisture control and biocompatibility are also key factors that need to be addressed. Herein, we report a hygroscopic and biocompatible paper-based TENG using a hydroxyapatite (HAP) mineral coating to enhance the paper fiber. The mineral coating can maintain the surface of the paper fiber, which will not cause large external deformation of the paper fiber under a force, avoid squeezing out excess water, and keep the friction surface dry, avoiding humidity affecting the output performance. Without interfering with the performance of the TENG, the maximum water absorption of the HAP composite paper is ∼8 μL. The HAP composite paper–based TENG (4 cm2) has an open-circuit voltage and short-circuit current 5.8 times and 4.2 times that of pure paper, respectively, and can obtain 80.4 mW/m2 output and directly light 117 LEDs. At relative humidity values of 25.7 %, 43.1 %, and 58.8 %, the performance retained the peak values of 80.2 %, 68 %, and 63.7 %, respectively. Even at a high relative humidity of 71.7 %, the triboelectric performance of HAP composite paper is retained 59.3 %, and the stability under humidity is better than that of pure paper (45.6 %). In addition, the mineral paper can even work with tissue fluid and output performance decreases by 43.8 %. The mineral-enhanced paper TENG with high power generation performance, hygroscopicity, biocompatibility, and degradability provides a new perspective for disposable wearable sensors, even in medical treatment. [ABSTRACT FROM AUTHOR]

Triboelectric nanogenerators (TENGs) have been investigated as a promising device to harvest mechanical energy into electricity. At present, paper-based triboelectric nanogenerators (P-TENGs) have been widely researched because paper features with lightweight, low cost, abundance, renewability and biodegradability. In this paper, the operating principles and operation modes of TENGs, the development progress and performance enhancement routes of P-TENGs are comprehensively reviewed. Additionally, the overview, challenges and opportunities of P-TENGs applications are also presented. [ABSTRACT FROM AUTHOR]

Piezoelectric nanogenerators (PENGs) based on micro‐fibre of polyvinylidene fluoride (micro‐fibre polyvinylidene fluoride (PVDF)). Flexible nanogenerator was developed by addition nanoparticle composition. This PENG fabricated using micro‐fibre PVDF/BaTiO3, which was deposited on paper interdigitate substrate by wire electrode free surface electrospinning method. The device from micro‐fibre PVDF performed open‐circuit voltage and short‐circuit current of 13 mV and 380 nA recently. The device from composite material addition value of open‐circuit voltage and short‐circuit current of 528 mV and 661 nA recently. [ABSTRACT FROM AUTHOR]