Search

Proton exchange membrane (PEM) fuel cells using Pt-based materials as electrocatalysts have achieved a decent performance, represented by the launched Toyota Mirai vehicle. The ideal PEM fuel cells consume stored pure hydrogen and air. However, SO2, as a primary air contaminant, may be fed along with air at the cathode, leading to Pt site deactivation. Therefore, it is important to improve the SO2 tolerance of catalysts for the stability of the oxygen reduction reaction (ORR). In this work, we develop the Pt/C-TiO2 catalyst against SO2 poisoning during ORR. Impressively, the hybrid Pt/C-TiO2 catalyst with 20 mass % TiO2 shows the best ORR and anti-toxic performance: the kinetic current density of ORR is 20.5% higher and the degradation rate after poisoning is 50% lower than Pt/C. The interaction between Pt and TiO2 as well as the abundant hydroxyl groups on the surface of TiO2 are both revealed to account for the accelerated removal of poisonous SO2 on Pt surfaces. [ABSTRACT FROM AUTHOR]

A new platinum group metal (PGM)-free proton exchange membrane fuel cell (PEMFC) cathode catalyst materials, synthesized using the VariPore™ method by Pajarito Powder, LLC, are characterized for their structure and activity. The physico-chemical analysis of the iron-nitrogen-carbon (Fe-N-C) electrocatalysts show mesoporous carbon material effectively doped with iron and nitrogen. The materials have an average pore size of 7–8 nm and high specific surface area. The Fe-N-C catalysts exhibit good oxygen reduction reaction (ORR) activity in 0.5 M H 2 SO 4 electrolyte with high half-wave potential and sustainable electrochemical stability over 10,000 repeated potential cycles with insignificant losses in their activities. As cathode catalysts in a PEMFC, the Fe-N-C materials deliver remarkably good fuel cell performance at low overpotential approaching that of the commercial Pt catalyst. The high ORR electrocatalytic activity of these Fe-N-C catalysts is credited to the synergy between nitrogen-moieties, specifically pyrrolic-N, pyridinic-N, and graphitic-N, and iron in addition to the high mesoporosity that facilitate an effective reaction path in boosting the electrocatalytic activity and stability. [Display omitted] • State-of-the-art commercial PGM-free catalysts for ORR were characterized and evaluated. • Was shown that active centres are atomically dispersed. • Performance of electrocatalysts was evaluated in industrially manufactured MEA form-factor. • The fuel cell performance is close to the state-of-the-art R&D PGM-free catalysts. [ABSTRACT FROM AUTHOR]

Abstract: In this study, a novel core–shell structured Pd3Fe@Pt/C electrocatalyst, which is based on Pt deposited onto carbon supported Pd3Fe nanoparticles, is prepared for the oxygen reduction reaction (ORR) in proton exchange membrane fuel cells (PEMFCs). The carbon supported Pd3Fe nanoparticles act as seeds to guide the growth of Pt. The formation of the core–shell structured Pd3Fe@Pt/C is confirmed by transmission electron microscopy (TEM), X-ray diffraction (XRD) and electrochemical characterization. The higher surface area of the synthesized catalyst suggests that the utilization of Pt in the Pd3Fe@Pt/C catalyst is higher than that in Pt/C. Furthermore, better electrocatalytic performance than that of Pt/C and Pd3Fe/C catalyst is observed in the ORR which follows a four-electron path. Consequently, the results indicate that the Pd3Fe@Pt/C catalyst could be used as a more economically viable alternative for the ORR of PEMFCs. [Copyright &y& Elsevier]

Ceria coated carbon nanotubes (CeO 2 @CNTs) were prepared as a versatile support material to improve both the activity and stability of platinum (Pt)-based catalysts. We demonstrated that the CeO 2 nanoparticles (NPs) had an extrinsically remote functionalization effect on the Pt electrocatalysis. The CeO 2 modulated the electronic structure, and facilitated the O 2 adsorption property of Pt without any intrinsic chemical doping or Pt-alloying. This led to d -band electron filling in Pt, and delivery of active oxygens (O−) to the Pt surface via oxygen spillover at the Pt-CeO x interface, thus enhancing the ORR activity. Furthermore, due to the unique redox behavior between Ce3+ and Ce4+, the dissolved Ce ions could also participate in the radical scavenge reaction, which prevents the chemical degradation of polymeric components in the cell. A single cell using the Pt NPs supported on CeO 2 @CNT as a cathode catalyst delivered a superior electrochemical performance and a retained durability compared to the cells with pristine CNT supported Pt NPs. • The ceria functionalized Pt/CNT (Pt@CeO 2 @CNT) was used as PEM fuel cell catalysts. • Ceria improves the ORR activity of adjacent Pt nanoparticles catalyst. • Dissolved Ce ions effectively scavenge the oxidative free radicals. • Pt@CeO 2 @CNT exhibits outstanding activity and stability in PEM fuel cells.. [ABSTRACT FROM AUTHOR]